Manual Weighted Function Issue
Hi Experts,
SRM 7
Extended Classic Scenario
I am creating a RFX (doc. type BIDX) using the role of a Strategic Purchaser. There is one item in the RFX.
Also, there is a header level question of type "Text". This header level question has manual valuation as a criteria for scoring.
Upon receiving the bids from the bidders I am unable to manually enter any score in the questions section against the bid responses. There is no visible field for entering the score manually.
Can you please let me know which step I am missing?
Thanks.
Regards,
Amish
Hi
I think you are not missing any steps it is the standrad behaviour of the system after setting "Manual valuation" for a given question system is expecting the sourcing specalist to evalute based on the answers provided by the suppliers.
FYI irrespective of the status of the question sourcing specalist will not be able to manually update the score for a given RFx response.
with regards
Manjunath
Similar Messages
-
We use lot of subjective attributes in bid invitation, such as "describe warranty process".
It is impossible to give any values how to score answers beforehand.
Is there any way to score these kinds of attributes after all the bids have come in?
We would like to use these points in bid comparison function.
One way to give points is to compare bids in excel spreadsheet, but it is not very user friendly.
Is there any way we could use manual weighting function in this scenario?Hi
<b>Please go through this -></b>
If you maintain dynamic attributes in a bid invitation of the "quantity" type and enter a unit of measurement, this UOM is not converted to the logon language in the weighting screen when displaying the parameter values for this attribute.
Note 921195 Unit of measure is not converted on weighting screen
The text value in the weighting set is not updated after the fix value of the dynamic attribute had been udpated. Since the fix value of the dynamic attribute becomes out of the sync with the text value in the weighting set, the bid evaluation score for this attribute is always 0.
Note 850054 Text value in the weighting set is not updated
In a bid invitation, you activate the weighting at item level for the default fields 'Delivery time', 'Net price' or 'Quantity' and select "Manual valuation" as the weighting function. If the system delivers a bid and you go to the item level of this bid to carry out the manual valuation, the system does not display the default fields mentioned above under the "Weighting" tab title and therefore a value assignment cannot occur.
Note 836931 Bid invitation: Manual valuation of default fields
Note 784550 Incorrect error message weighting
Note 780108 Scrolling in comparison of bids does not function correctly
<b>Which SRM version are you using ?</b>
Hope this will help.
Regards
- Atul -
SGD 4.5 Desktop Functionality Issue
I've come across an odd functionality issue on SGD 4.5. When I start "My Desktop" everything works fine. However if I start a new Full JDS Desktop session on another server, the JDS session doesn't appear to load correctly. New windows automatically open in the upper left corner and can't be moved. If I close both JDS Desktop sessions and open the other system first, then "My Desktop" session doesn't open windows properly. Has anyone come across this? It's not to big of deal right now, but it might become more of an issue when more users start using our SGD instance.
Adam@JRoesler :
The script for installing the users during installation when the users are not created is included some version before the 4.50.907
The SGD version here is only 1 minor version before the latest release.
@aspenhedge:
If I look into the rpm (for Linux install) I don't see a check for a valid shell. It does however try to 'su' into those accounts. I might be wrong in this one.
Can you manually use 'su ttaserv' and 'su ttasys' without any problem? Do these users have a valid home-dir for example.
- Remold -
Function issue of Cross-Reference
Hi,
thanks for your attention on this topic.
there is function issue of Cross-Reference.
when click the Cross-Reference after re-installed the software (adobe Framemaker 7.10), the function is not working. please kindly check the screenshots below:
Error message below:
Please help to check this issue.
software: Adobe Framemaker 7.10
System: windows xp sp3
thanks in advance for your support .
Message was edited by: Lu StevenFire the error log off to the e-mail address indicated in the error message and then contact Adobe Support.
-
Bid Invitation attributes and weighting function
Attributes are transferring to Weighting section. This did not haqppen in the past.
During bid invitation creation the dynamic attributes that are used are
automatically transferred to the weighting function. Along with this
there is a message that is displayed "Specify the parameters of
weighting function". This never happened in the past before
implementing ECC 6 Enhancement pack 5, SAP_BASIS Component: Support
Pack 7 for 7.02, and SAP Kernel: 720 patch 115.
I found note 1662288 but it is applicable to server 701 and 702. Our
server is 550.Hi,
1. make sure email set up is done as per note 455140. To send e-mails after bid is published for the bid invitation transaction 'BID' attach relevant event schema. This will take care of sending mails whenver bid invitation is published or changed.
2. Provide the role BBP_EC_SUS_BIDDER to the bidders to enable them to see bid invitaions and send bids from SUS portal. For this you also need to enable SSO (single sign on) between EBP and SUS. Please refer the below link for further information.
sending RFQs from SRM EBP to SRM SUS
3. It is possible to down load the Bid invitation. Further update the mail id of the bidder with your id so that you can receive the bid invitation smartform. This you can take a print out and send it to bidders. You can make config setting in SPRO 'define actions for document output' to send the bid invitation smartform.
Hope this clarifies all your doubts here.
rgds,
RRK -
Manual Accruals Functionality FI
Hi,
Does anybody know how to customize the Manual Accruals Functionality in FI? I only have the information that is provided in help.sap.com and it is not too much. I cannot activate this functionality in the menu either.
I will appreciate any help (user guides, customization guides...) of this functionality
Thanks very much in advance
RafaSee here for configuration guide:
http://help.sap.com/bp_bblibrary/600/documentation/N73_BB_ConfigGuide_EN_DE.doc
Page 25 onwards:
3.4 Manual Accruals 25
3.4.1 Assign Company Code 25
3.4.2 Define Accounting Principles 26
3.4.3 Assign Accounting Principle to Company Code 27
3.4.4 Define Accrual Types 28
3.4.5 Define Permitted Company Codes and Fiscal Years 28
3.4.6 Define Accrual Object Categories 29
3.4.7 Define Number Ranges for Accrual Objects 30
3.4.8 Define Customer Settings for Components 31
3.4.9 Specify Standard Settings for Accrual Calculation 31
3.4.10 Define Posting Control 32
3.4.11 Define Number Ranges for Periodic Posting Runs 33
3.4.12 Define Number for Application Log 34
3.4.13 Define Number Ranges for Accrual Engine Documents 34
3.4.14 Define Number Ranges for Assigning ACC Doc. to ACE Doc. 35
3.4.15 Define Combination of Characteristics 36
3.4.16 Define Set of Rules 36
3.4.17 Define Values for Set of Rules 38 -
BPS - possibility of Manual Planning Functions
Hi guys,
I need some technical advice. Please advice if this task can be "EASILY" accomplished via BPS Manual Planning Function ?
My client need to input certain data into BW and generate a report displaying all the below mentioned data into a simple BW query.
Type of data that need to be inputted manually (key-in) :-
Market Velocity
AVG Daily Trading Value
Mkt CAP of New Listing
No. of new Listing
No. of Derivative Instructions
Please assist soonest possibleHi John,
Should work. If you have an InfoCube (type transactional) with the chars & keyfigs, you could do a manual planning. However, for demo purposes, you could also use transaction RSINPUT for this cube. If you have defined your correct InfoObjects, you have these several options.
If you want to report on this transactional InfoCube, make sure you include the variable for "most current data" in your BEx report.
Good luck,
Laurens. -
Depending on how this discussion board works, I will attempt to update functional issues with this operating system.
9/21/13: Alarm: Setting the alarm is rather akward, the numbers are too rigid, fine, and small. I feel the numbers being larger would be more user friendly.
9/21/13 Calendar: Previous version was superior in certain ways. Shading out a part of the day which you typically don't use (ex: 1am-5:30am) would be great. I feel lost in this update, it does not feel refined. Please allow me to send an appointment through imessage already as well!Tell Apple.
http://www.apple.com/feedback/iphone.html -
Hi All!
Is there any forum related to functional issues in SD and MM.Please do forward me the names if there are any.
Regards
PavanCheck these
http://www.sapfans.com/
http://www.erpfans.com/
http://www.sap.com/community/default.epx?logonStatusCheck=0 (Login required)
Regards,
Vikas Madaan -
Specify the parameters of weighting function test
HI:
We do a RFX, enter a custom question: TEST,
Maintaining weight,
error: Specify the parameters of weighting function test.
SarahCan you share the solution?
Regards,
Nikhil -
Dear all,
I have an issue wherin the system is allowing me to change the Ship To in the sales order and this Ship to is not a part of the Partner to sold to and the order is allowing me to enter any SHip To and getting Saved. Can you pls let me know where is the setting for this and not to allow any other ship to's to be manually entered in the SO.
Thanks
SrikkanthDear Srikkanth,
There are two issue in your qestion:
1. Not allow any other **** to party then the one mentioned in Sold to party
2. Do not allow to change the Ship to party.
Now the solutions to the above issues are as follows:
1. IMG - Sales and Distribution - Basic Functions - Partner Determination - Set Up Partner Determination - Set Up Partner Determination for Sales Document Header - Select TA - Standard Order & click on " Partner Functions in Procedure" on the left hand side.
Here for combination of TA & SH (Ship to party) Maintain "SP" in the source feild.
2. In the same menu path mentioned above - Put Tick mark in the check box of Not Modifiable so that user cannot change the Ship to party proposed by the system from the Sold to party.
Hope this solves...
Thanks,
Jignesh Mehta. -
Surface Pro 2, Functionality Issues with Photoshop
I've been working with PS for years, and previously used a Cintiq, but i would like to branch out somewhat to a Surface Pro 2 by Microsoft. However, i've been having issues with the way the pen works and how the program reacts to swiping.
I would like to know if i can change the functionality of the button on the stylus on the Surface Pro, as i often have with my Cintiq tablet. Currently it pulls up the brush menu, when i would like it to function as an eraser.
Further, PS seems to react to any upward swipe from my finger by throwing the view of the canvas wildly to the upper corner, rather than a gentle scroll.I've been working with PS for years, and previously used a Cintiq, but i would like to branch out somewhat to a Surface Pro 2 by Microsoft. However, i've been having issues with the way the pen works and how the program reacts to swiping.
I would like to know if i can change the functionality of the button on the stylus on the Surface Pro, as i often have with my Cintiq tablet. Currently it pulls up the brush menu, when i would like it to function as an eraser.
Further, PS seems to react to any upward swipe from my finger by throwing the view of the canvas wildly to the upper corner, rather than a gentle scroll. -
SAP MII function issue in SAP MII 14.0
Hi,
Currently I was working on some content up gradation work in SAP MII 14.0 , but while working, I have got a strange think regarding SAP MII Functions. We have developed the same code in SAP MII 12.2 and faced the issue while migrating to 14.0. The issue is as follows,
The function we have used in 12.2 is getvalue(name) as in the below screenshot,
but while we have migrated to 14.0, then we saw the function has updated into getvalue(map, key) in 14.0
I have no idea why parameter of the existing function got updated, but the problem is if someone want to migrate the existing code from 12.2 to 14.0 using such of function then he/she can get a "Conversion Exception" and at that time it will become bit hectic to identify the issue and change the logic to handle this in all the places.
Regards,
SumanHello Suman,
I guess it is a bug in MII 14.0. The help doc has the getValue(name) still. However, the newer function is not present in the same. I guess it was not documented. I guess, the getValue(map, name) is a newer function which somehow replaced the older one.
I would suggest you to raise a support ticket. According to me, the getValue(name) and getValue(map, name), both should exist.
Regards,
Tufale Ashai. -
Function issue: inconsistent datatypes?
Hi all.
I'm having an issue with a function that converts coordinates to a spatial data type.
My database version is:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Here's my package that I'm using
create or replace package make_geometry
as
function get_geometry_from_coords (p_coords in clob )
return sdo_geometry;
end;
create or replace package body make_geometry
as
function get_geometry_from_coords (p_coords in clob)
return sdo_geometry
is
v_geometry sdo_geometry;
begin
--with t as (select p_coords coords from dual)
select MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1)
,cast(multiset(
select ordset
from (
select regexp_substr( regexp_replace(
replace(p_coords,chr(10))
,' {1,}',',')
,'[^,]+',1,level) ordset
,rownum rn
from dual
connect by level <= length(regexp_replace(regexp_replace(
replace(p_coords,chr(10))
,' {1,}',','),'[^,]+')) + 1
where mod(rn,3) <> 0
) as sdo_ordinate_array))
into v_geometry
from dual;
return v_geometry;
end;
end;
/basically, it takes a list of coordinates, in the following format:
with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378437734999997,0 130.88164895999998,-12.379271400499997,0 ' coords from dual)replaces the spaces with commas and splits the resultant string by comma, then removes the third coordinate in each set (sets delimited by spaces in above example) and converts the result to sdo_geometry type.
This logic is not where my problem is occurring
If I run the query found in the package separately, it works fine:
SQL> with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378437734999997,0 130.88164895999998,
-12.379271400499997,0 ' coords from dual)
2 select MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1)
3 ,cast(multiset(
4 select ordset
5 from (
6 select regexp_substr( regexp_replace(
7 replace(coords,chr(10))
8 ,' {1,}',',')
9 ,'[^,]+',1,level) ordset
10 ,rownum rn
11 from t
12 connect by level <= length(regexp_replace(regexp_replace(
13 replace(coords,chr(10))
14 ,' {1,}',','),'[^,]+')) +
1
15 )
16 where mod(rn,3) <> 0
17 ) as sdo_ordinate_array))
18 from dual;
MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),CAST(MULTISET(SELECTORDSETFROM(SELECTREGEXP_SUBSTR(REGE
XP_REPL
SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 1), SDO_ORDINATE_ARRAY(130.882141, -12.37759, 130.881893, -12.378
438, 13
0.881649, -12.379271, NULL))but if I call the function:
SQL> with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378
-12.379271400499997,0 ' coords from dual)
2 select make_geometry.get_geometry_from_coords(coords)
3 from t;
select make_geometry.get_geometry_from_coords(coords)
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got CLOB
ORA-06512: at "HR.MAKE_GEOMETRY", line 13If I change the package to expect varchar2 the above example coordinate list works fine, but obviously that doesn't work when the coordinate list exceeds 4000 characters.
any thoughts?not sure that is the problem:
SQL> create table foo (mr_clob clob);
Table created.
SQL>
SQL> insert into foo values ('testing'||chr(10)||'testing');
1 row created.
SQL>
SQL> select replace(mr_clob,chr(10),'blah') from foo;
REPLACE(MR_CLOB,CHR(10),'BLAH')
testingblahtesting
1 row selected. -
Keyboard Functionality Issues in Finder (Mac OS X 10.5.4)
I've recently begun to experience loss of the functionality of my keyboard in Finder on my personal laptop and work computer whenever I have a Wacom tablet plugged in. Restarting and unplugging the tablet sometimes works, but only after the 2-3 try.
Basically, the modifier keys and Function keys continue to work and the middle portion of keyboard fails to respond whenever I try to type a letter or use the spacebar. For example, when I attempt to create a folder it's first untitled. Whenever I try to rename the folder I can highlight the text, I just can't rename the folder. The keys appropriate keys don't work. Now if I use a web browser (Safari 3.1.2) or any other application other than Finder the keyboard functionality returns. I am able to type and use the spacebar, as well as use the other keys. It's as if nothing is wrong.
Has anyone else experienced this issue?
I recently started to experience it on my work computer and wondered if it had something to do with a Wacom tablet being connected. It seemed whenever I left the tablet unplugged and restarted my Mac everything was normal. Only when the tablet is plugged in does the keyboard functionality loss bother me.
Thanks to any who can help.Did ever you try the "Relaunch Finder" option in the force quit menu?
Maybe you are looking for
-
I have over 4000 songs from mine and my now ex gfs Mac. After the split I was unable to transfer her share of music to my new lab-top. I don't wanna lose my music but I can't buy all music again I've had this problem for so long. My iPhone hasn't bee
-
How do I restore the address bar at the top of my window in firefox on a mac?
My kids were messing with my computer and must have pushed something and everything disappeared. I need to know how to put an address bar (back button, refresh, ect) back up into the top of my window. Part of the problem is that my computer screen is
-
Hi Guys I have a problem when one workbook. I made the following steps. 1. I have in BW Dev. the workbook with the 2 queries. 2. I create a Role with this workbook. 3. I made 2 transport orders with the Workbook & Queries and the roles. In BW QA
-
Catch KeyDown events for modifier keys
I need to be able to tell when a user presses or releases the CTRL key for my application, but I can't get KeyListeners to work and the key bindings only appear to work with releasing the key. I also have key bindings for CTRL key combinations (like
-
Installation problems with BB Unite!
During the installation of BB Unite! v. 1.0.0 the error messages "DB-upgrade failed. Error while executing a SQL instruction" and "The database could not be updated during setup. Find more information in C:\Programs\Research in Motion\Blackberry Unit