Manually adding AWE_WINDOWS_MEMORY

Hi,
I'm using oracle9207 on windows server 2k3 Ent Edition 32bit with 8GB of RAM. Right now I'm only using 2GB of RAM, I'm planning to implement the /3GB and /PAE switch to use more than 2GB of RAM. I have read articles regarding this and I'm somewhat clear about what to do, what I'm having problem is the AWE_WINDOW_MEMORY, this value should exist in the HKLM>SOFTWARE>ORACLE>HOME1 right? But in my system it doesn't exist, so I'm planning to create this myself. Has anyone tried to manually create this value?
Please Help.
Thanks and Best Regards

Hi,
If you have metalink access you can refer to note 225349.1
There is much information about AWE
good luck
cheers
Fzheng

Similar Messages

Why do manually added mp3s in the Podcasts app all show up in the same folder?

Let me explain!
I like to download lectures and talks and audio books from other sources than iTunes.
I like to add these mp3 files to iTunes, change the Media type of them from Music to Podcast, and transfer them to my iPod Touch. This is so I will more easily know which ones have been listened to and can be removed.
This worked (and works) well in the Music app. Everything was separated into folders based on what album name I had manually assigned to the ID3 tags of the files.
But in the Podcast app, all of these files are now lumped into one folder.
I currently have eight un-listened-to episodes of Philip K. Dick's Valis on my iPod Touch. But the folder shows a count of 106 unheard episodes in relation to this audio book, because it lumps all of my other manually added podcast media tracks into the same folder.
Why is this?
Why does the Podcasts app refuse to let me separate manually added files into individual folders based on album information?
Had the My Stations feature let me populate its playlists in a more rational manner, and also allowed me to manually change the running order of the tracks (something which only seems to be possible in the On-The-Go playlist), I would not think that this omission was such an annoyance.
I have been searching for months for mentions of this problem, but I have not seen a single one, and so I have finally decided to make my own thread.
Let me know if the nature of my problem remains unclear.
Joakim

That doesn't do anything.
When I plug my phone in and attempt to sync it with iTunes and click on "Steven's iPhone" under "Devices" the display to the right just says "loading..." and it stays like that for hours. Nothing happens.
As far as I can tell, there is literally no way for me to delete the photos from my iPhone and I therefore, cannot upgrade to the newest software, download new apps, etc.

I got an iPhone 5 today and the apps I had backed up on cloud will open for a second then close. I have shut down and restarted, added another app to sign in to itunes and then manually added each app but it hasn't worked yet. Help!

I got an iphone 5 today and tried to sync to the cloud with the apps from my iphone 4. Syncing happended but I cannot open an app on my new iphone 5 for more than second then it closes. I have restarted the phone, added a new app that required my itunes password and manually added each app. None helped. Can you help me?

Morning Vjohara,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Best of luck,
Mario

Way to get Podcasts app to take manually added podcasts without syncing?

Hi guys,
I listen to a lot of podcasts and I've been having all sorts of problems using the Podcasts app, it's a bit of a mess.
I don't want to even try to continue having it automatically sync with my library, this seems to create problems. I put some episodes on there, they seem to be there one day then the next day they're in the list but suddenly need to be streamed even though I added them and have not told the app to delete them.
Other times, even though I only added, say, 10 out of 100 podcasts for one show, I go into the list and all 100 show up with the little cloud symbol next to the 90 I didn't want. Then I have to go scrolling through to pick out the ones I actually intended to listen to. Is there somewhere to turn off showing un-downloaded episodes?
Wanting to re-listen to old episodes is a nightmare. I add them, they disappear everytime I sync the phone overall, even though I repeatedly uncheck 'sync podcasts'. Also, if I uncheck 'sync podcasts' after adding some and then sync - it clears every podcast off the phone, as if that's what I wanted.
Even after I uncheck 'sync podcasts', manually adding podcasts automatically causes podcast syncing to turn on. Why would Apple assume that's what I want if I'm manually adding podcasts. Why can't I just manually add the ones I want? That seems to be the only possible solution to all the syncing nightmares above and yet iTunes/the app won't allow it to happen.
Am I doing something horribly wrong or is this just a terrible app? I have looked into alternatives but none of them will sync with my itunes library. And don't even get me started on how iTunes itself handles podcasts now!

My iPod is a 3d gen nano so doesn't have independent downloading capabilities.

I have an iPod touch, with iOS 5.0.1 I have manually added lyrics and album covers on iTunes, but they aren't syncing over. Why? How do I fix it?

I have an iPod touch that I bought recently, and have updated everything to the iOS 5.0.1 version. I have checked my music settings, and it has Lyrics and Podcast Info "ON". I have manually added the lyrics to several songs, as well as album covers, and neither one are transferring over to the iPod touch when syncing. How do I go about fixing this? I have double checked all the settings I can think of to get this transferred over. I have even double-checked the online manual to make sure where I would even find the lyrics, and how to get to them...yet....nothing.

I didn't realize I had to delete everything and sync again. WHEW! Thank you so much. That worked.

Itunes 7.1 ipod playlists - problems synching or manually adding

I was hoping 7.1 would solve these two issues, but it hasn't. Does anyone have advice for either of these problems:
1. when the ipod is plugged into the computer, Itunes caps the number of playlists that show up in the 'synch only checked items' playlist. This is infuriating, as I have 2000 playlists.
2. Okay, so you decide to go with manually adding playlists to the ipod icon in the itunes window. Before verision 7, you could actually open that ipod window and drag playlists from your main window into the ipod window. Now, you can only add playlists manually by dragging the playlists up toward the Ipod icon. If you have 2000 playlists like me, it literally takes 30 seconds to drag up to that icon, past all the other playlists. If you decide to try and drag into an opened Ipod window, the music shows up in your ipod, but NOT THE PLAYLIST.
Because of these problems, I don't have any bands on my ipod from the letter P onward. Does anyone have advice about this? Am I doing something wrong?
G5, single processor Mac OS X (10.4.7)

i have the same problem guys. i make playlists for everything, not a big fan of the other view options available. i have been getting frustrated lately with the lack of playlist drag and drop and having to scroll up through a couple hundred playlist to get to the **** ipod icon. i have actually created folders for parts of the alphabet so i can simply close them in order to get to the ipod icon a lot faster. stupid work around, but alas it does work. i think apple doesn't want people to use playlists like we do.

HT1386 I can no longer see anything in the "Manually Added Songs" field when managing music on my iPhone4.

I can no longer see anything in the "Manually Added Songs" field when managing music on my iPhone4. why?

If you are using iTunes Match, your songs are long gone.
iTunes Match is now a streaming service, with no regards to letting you download individual files.
Otherwise, I'm sorry for wasting your time.

Manually added tracks put my iPhone over capacity. Now I can't sync. Help!

I have a number of Audiobook I tried to sync to my phone. I could not find anywhere in the iPhone settings to choose to sync these (anyone know where?). So I manually added them by dragging them from iTunes onto the iPhone.
However they are very large files and put my iPhone "over capacity". Now whenever I try to sync I get an error message saying:
"The iPhone “Mr Shiney” cannot be synced because there is not enough free space to hold all of the selected items (additional 7.38 GB required)."
But I can't unselect these files! They don't appear in the "Manually Added Songs" section of the Music tab. My phone is stuck in this weird state where I can no longer sync.
I have tried deleting the songs from iTunes. But this now just says the songs couldn't be found so I still can't sync.
Should I restore from backup? Won't I lose all my app content? Any ideas what to do?
My iPhone is a 3G on iOS 4.2.1. iTunes is 10.5.

Have you touched the "More" button (on the iPhone).
then gone to Audio Books.
Are they there?
I had an audio book still on my iphone, it survivedf the iOS5 update.
To get rid of it, I plugged iPhone into Mac,
Go to itunes.
Click on Iphone in iTunes.
Go to Books tab,
Scroll down, there is audio books.
Choose sync selected audio books,
And untick the ones I don;t want.
Dows this work for you?

ITunes manually added artwork is missing after Windows Easy Transfer from XP to Windows-7. Please help!

After a Windows Easy Transfer from a Windows XP pc to a new Windows-7 pc, all the iTunes artwork that I had previously manually added is now missing. I estimate 25-30% of my CDs needed manual intervention to add artwork. Some of these were album covers I found on the web but many are photos that I took and cropped but have not retained. I have nearly 20,000 songs. Every one had artwork on my XP machine. Now on Windows-7 it appears to be missing. I spent many patient hours to get artwork in place for all my music and don't want to loose it or have to repeat the process. Please help! Many thanks for any contributions.

Hi Funster58,
Please try the following methods to solve this issue:
Method 1: Perform a clean boot.
A clean boot helps to verify if any third party application services or startup item is causing this issue. For your information, please review this KB article to put the computer in clean boot:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
Note: Make sure you put the computer back to Normal Startup once you are done with the troubleshooting.
Method 2: Run SFC Scan
System File Checker (SFC) scan can troubleshoot missing or corrupted system files on your computer. For your information.
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type sfc /scannow, and press Enter.
Method 3: Run check disk
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type chkdsk /r /f, and press Enter.
For your information, please review the similar issue to get more help:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/how-can-i-use-easy-transfer-to-transfer-settings/36b9123a-4b6b-4117-9af6-515e44665188
Regards,
Lany Zhang

How can I get ITUNES to display manually added artwork for each song regardless of the album name?

I have been manually adding artwork to my songs. When I click the Show Artwork check box, it doesn't show the cover art. For example some greatest hits albums have different cover art per track. ITUNES picks one of the cover art and shows it for the entire album grouping.
Anyway around this? I want the added cover art to display per song.

The artwork of each individual track does display during playback, in the small thumbnail at the top of the iTunes window, or at the left of the MiniPlayer control (opens by clicking the thumbnail), or the larger artwork panel that is shown if you click on the Show Large Artwork control in the MiniPlayer. It should also display on any iPod or iOS Now Playing view.
The Up Next list uses the album art (usually cover of the first track) for everything from the same album, which is perhaps a shame, although in general one artwork per album makes sense.
tt2

PNG files sent to iphone Photo App do not appear on 'date taken' (manually added in windows explorer)

I have over 1000 PNG files that do not have exif 'date taken'. They only have exif 'date created or modified'
The 'date created/modified' is not the actual date that I took the screen shots.
I added the 'date taken' manually in windows explorer. However, it seems that this does not write this data into the exif 'date taken' which remains blank.
When I transfer the PNG file from the PC to IPhone Photo App, it does not appear on the 'date taken' (that I added manually) but appears on the exif 'date created or modified'.
Interestingly, when I do same as above but with JPG file, it does show up correctly based on the 'date taken' (that I added manually in windows explorer).
So I converted the PNG file to JPG using one of the online tools. However, when I do this, the converted file does not retain the 'date taken'.
I can fix the above by:
1. Use Paint to save the PNG file as JPG; this retains the 'date taken' but this is not the solution I am looking for as I would need to do this for each file (there is no bulk 'save as' in Paint)
2. Use a file conversion tool to bulk convert from PNG to JPG; but again this is not solution, as I would have to manually add the 'date taken' in windows explorer to each JPG file
Alternatively, I tried to rename the file name to include the 'date taken' and then use an exif date changer app to set the xhif dates based on file name.
However, I was not able to find any software that would allow me to do this. The software that I have seen only picks up the 'date taken' from file EXIF data. But in my case there is no such data in the file - only the 'date taken' that I manually added in Windows Explorer.
Any advice is appreciated. All I want to do is transfer PNG files from PC to Iphone Photo app and have these files appear in Photo app based on the 'date taken' (the one I manually added in windows - not the date taken in exif data).

Have you touched the "More" button (on the iPhone).
then gone to Audio Books.
Are they there?
I had an audio book still on my iphone, it survivedf the iOS5 update.
To get rid of it, I plugged iPhone into Mac,
Go to itunes.
Click on Iphone in iTunes.
Go to Books tab,
Scroll down, there is audio books.
Choose sync selected audio books,
And untick the ones I don;t want.
Dows this work for you?

Help manually adding songs

I am on IPhone 5 iOS 7.02
since updating to iOS7 and ITunes 11.1.1.11, I cannot seem to get songs that I have manually added (via converting audio to mp3) into my iPhone. I can add it into my Itunes library and it plays fine, but no matter what I do, I cannot get it into my phone. I have tried manually managing music, checking and rechecking the songs, with sync in between, syncing the entire library, syncing only checked songs (with that particular song checked) and it still shows as a dotted circle "on this phone" Is this an issue with the update? When I try to drag and drop, I pull the song to the right, and my iphone pops up, and even flashes when I drop the song, but it never goes into my music on my phone. Is there a setting that I need to change? HELP!!

I'm having the same issue!
Even if I do manage to successfully add the songs to my iphone some of them disappear off my iphone once I disconnect the phone from the computer

Outlook 2007 doesn't show icloud service running. Does anyone know what the dll for this service is so it can be manually added to outlook?

Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?

I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK.

HT201317 Manually adding photos to Photo Stream

I've manually added photos to the upload photo from my windows desktop but they are not appearing on my iPhone's Photo Stream. I think I have everything set up and turned on correctly...

Save any photo stream photos you want to keep to your camera roll, then turn photo stream off, wait a minute or two, then turn it back on. To save them to your camera roll, open your my photo stream album, tap Edit, tap the photos, tap Share, tap Save to Camera Roll.

Error when manually adding user to project workspace

I am currently using Project Server 2010. I have a requirement for Business Users to have access to the project workspaces in Sharepoint but not be users of the PWA. Similar to as it is outlined in this Microsoft Documentation (http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx)
There might be a circumstance where you want to grant people who are not members of the project access to the project workspace site. Anyone assigned to the Web Administrator group can create new users for a project workspace site. In addition to the
four groups that were mentioned earlier, there are four default SharePoint Server 2010 groups. They are as follows:
Full Control   Has all personal, site, and list permissions.
Design   Can edit lists, document libraries, and pages in the Web site.
Contribute   Can view pages and edit list items and documents.
Read   Can view pages, list items, and documents.
I have added the user to the Contributor group but when they try to contribute to the space, ie add documents or an issue/risk, they recieve an error, similar to as is documented in the following article (http://pwmather.wordpress.com/2011/07/11/manually-adding-users-to-project-workspace-project-site-in-projectserver-ps2010-ps2007-epm/)
What has been identified in this article makes sense.  I am just wondering why Microsoft documentation states that it can be done.
Any thoughts?

Chris,
The Microsoft article says, users who are not part of the project. It does not say not part of project server.
However, as far as I can remember, this scenario could work if the "Synchronization" is turned off between Project Server and Project Sites. I will run a test and confirm, later today.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

Manually adding AWE_WINDOWS_MEMORY

Similar Messages

Maybe you are looking for