Manually create WT in "Waiting" Status.

Dear Experts,
Is there a way we can create some kind of "Planned" warehouse tasks like we have WTs created in "Waiting"?
We cannot use POSC for this. But we would like the Warehouse Tasks to be created in "Waiting" Status.
These are required for TUs. So, the idea is to convert all these "Waiting" tasks in to "Active" tasks upon TU Arrival.
Regards,
Shashidhar

Hi Shashidhar
This can be achieved by other way.
Do not activate IDN >>
So when you arrive TU u activate TU and make auto WT creation.So as you activate IDN system will automatic create WT for unload/or WT for putaway in open status to move forward.
why you do not want to use POSC... you can create two step POSC.
unload and putaway.
Regards
Suraj

Similar Messages

Leave Application in Waiting status

Dear Friends,
The ESS leave application has approved by supervisor, but because it's in payroll lock period, the lease application is put in 'wait' status.
Any body knows how to change a ESS leave application from wait status to complete?
Best Rgds
Mr Fu

Try Tcode SWIA.
sometimes we might not be able to correct this issue. then you have to manually create a record in SAP

HT1688 I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

Hello Jose,
I would be concerned too if the audiobook I purchased from iTunes was not downloading on my iPhone. I have a few suggestions to get it downloaded to your iPhone.
First, I recommend checking to see if the download was interrupted:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the audiobook still does not download, I recommend signing out and back into the iTunes Store on your iPhone:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
The last step states to sign in with another account, but for the situation you described, I recommend just signing in with your same Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If you are still not able to download the audiobook, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M.

BPM with waiting status in MONI

hi forum ...
in a fille to file scenario...with BPM.....
there are two receivers and 1 send step....
its like receiver1-->receiver2----->send1
when the scenario runs.......it receives a particular message for "receive2".....which i cant provide right now.......so the sxmb_moni shows a waiting status .....means a clock like signal......
how can i stop the BPM instance in waiting loop
is there any time out after which the BPM instance ll stop automatically

<<you have configured a terminating event>>
but i cant provide that condition due to some reasons......
<<SWIA to complete the workflow manually>>
how to do that...can u elaborate

Java Proxy message in waiting status

Hi,
   Let me explain my case, In our Integration Scenario we have configured an Inbound Java Proxy as the How to guide (HOW TO WORK WITH JAVA PROXIES) expain, but the proxy doesn't hava code, that is, it have the code by default when its created, and when we register it and the scenario runs, in the message monitoring the status of the message to the JP Business Service is in WAITING status, and in the details it says sometimes that an old reference to another JNDI name of bean is doesn't locate or the message "MessageSpecifier could not be reset".
   Remember, the Imp. class has only the default code and the scenario is JDBC --> XI --> JavaProxy
   Any ideas?

Hi Hector,
Status: WAITING
          The message had been sent and it is failed and is currently waiting for another attempt.
Solution :
When the fist attempt to deliver the message has failed (a recoverable exception arose), the message is usually rescheduled and the status is updated to WAITING. As long as the message is in this status, the Messaging System retries to deliver the message according to the configured retry settings (default 3 tries).
Regards
Agasthuri Doss

SRM PO Workflow (BADI Type) in waiting status

Hi all,
I am in SRM extended classic scenario. After shopping cart gets created, it gets automatically approved and PO is created. Then PO workflow is triggered for approval. This happens fine in development box. However when its been transported in quality, the PO workflow remains in 'Waiting Status'. The requested start date has been set to future date 31.12.9999. Thus the workflow does not start properly. If gets stuck with the first step. It does not go upto the approval step.
Is there anyone who can tell me why this is happening and what is the remedy?
Regards
Dip

Hi Dipankar,
Is it required to set the requested start date to future date 31.12.9999?
Also check if the same has been maintained in development system.
I think this might be restricting the workflow to proceed. Please check the relevance of this deadline monitoring.
Regards,
Saumya

Balance Carry Forward Business Rule in Waiting Status

Hi ,
I have created a Business Rule for Balance C/f.
When I run this Rule from Data Manager using Run Package, this goes in waiting status.
How I can resolve this issue.
Thanks in advance,
Sanjay

Diksha-
Account transformation is different from CF Bussiness rule, This you can clearly see by the properties it uses..
for ex: CF BR uses your "year" property of the time dimension , to figure out which "Monthnum"=12 from prev year shld be carry forwarded to the monthnum=1 of this year...
hence irrespective of the timeprd you run in a current fiscal year, its always last years last month which gets copied over to this year first month...which you have already seen..
Regarding account trnasformation...you dont have this complexity...
This is mainly helpful when you have FLOW dimension( one of the main uses)..
hope this helps..
Vishal..

WF 14000075 in waiting status ??

Hi,
After applying SP8 and SP9 on SRM50, all created SC create hold PO.
The hold PO is absolutely complete. If i just go to chnage mode in BBP_POC and select order, the PO status change automatically from hold to ordered and Po is duplicated into the backend (ECS scenario).
I checked SDN and WS14000075 and WS14000076 workflow definition look fine in SWDD.
In SWUD, i get sub workflow in WAITING status ??? thus i cannot proceed them...
In RZ20, i just got a red message MF BUS4101 pour WF-BATCH. Sy-subrc : .
However my WF-BATCH user seems to be OK : everything is green in SWU3 .
Does anybody encounter the same issue ?
How to solve it ?
Kind regards,
Yann

Solved through 1043808 ECS: Purchase orders always created on HELD status

Creating Idocs With 64 Status.

Hai Friends,
My requirement is like this...
Scenario:- my client says...They Get some idocs from a external system and then a program runs in the background to read these idocs and post Inbound delivery and IR documents.
And Now As These IDOCs are not coming ...We have to read this data from a excel sheet and Create exactly the same type of IDOCs so that They can RUN the same Program to post Documents.....
Now my doubt is ...How do i create IDOCs with status 64 and that too in the same same..as here there wont be any target system..
Please help me with ur solution....How should i Approach...I know how to fetch data from excel and all..I need Help specially in
Creating IDOCs with 64 status and what should be in the Control Records..
Waiting for your insight.
Thanks,
Jeevan...

Hi,
You can use below FM for your requirement.
CALL FUNCTION 'IDOC_INBOUND_SINGLE'
    EXPORTING
      pi_idoc_control_rec_40 = w_control_rec
    IMPORTING
      pe_idoc_number          = g_idoc_number
    TABLES
      pt_idoc_data_records_40 = i_idoc_recposting
    EXCEPTIONS
      idoc_not_saved          = 1
      OTHERS                  = 2.
IF sy-subrc = 0.
Idoc created if sy-subrc = 0
Endif.
The Control records should be like this ( You need to check the partner profile)
w_control_rec-mandt   = sy-mandt.
w_control_rec-docrel = <sap_release>
w_control_rec-direct = '2'.
w_control_rec-idoctyp = < Idoc type >.
w_control_rec-mestyp = < message type>.
w_control_rec-sndpor = <sender port>
w_control_rec-sndprt = < Sender partner type>
w_control_rec-sndprn = < sender partner>.
w_control_rec-rcvpor = < recv port>
w_control_rec-rcvprt = < recv partnertype >
w_control_rec-rcvprn = < recv partner>
Let us know if it helps you. Thanks.
Edited by: Atul Mohanty on Jun 23, 2011 10:59 PM

Creating PR in Unapproved Status

Hi All
Pl let me know the steps to be followed to create Purchase Requisition in Unapproved Status in Back To Back Order Scenario. Business requirement is to create PR in unapproved status from the SO Line.
We are on 11.5.10.2 and its urgent.
Thanks
Rajeev

Please refer the below note: Back To Back Process Always Create Approved Purchasing Requisitions (Doc ID 467508.1)
Goal
===
How does one use the Back to Back Process and have the new requisition be created in status
INCOMPLETE so that additional lines may be added to the requisition?
### Steps to Reproduce Problem ###
1. Select OM responsibility
2. Create Sales Order in OM
3. Book the Sales Order
4. Run the process "AutoCreate Purchase Requisitions"
See the field AUTHORIZATION_STATUS in the table PO_REQISITIONS_INTERFACE_ALL
always is populated with the value "APPROVED",
5. Select Purchasing Responsibility
6. Run the process "Requisition Import" with parameter "Initiate Approval after ReqImport" = No
8. Query requisitions, at this point the requisitions are in status APPROVED.
Want requisitions in status INCOMPLETE.
Solution
=====
Per standard functionality, the Back to Back Process cannot create new requisition in status
INCOMPLETE. We create the entry in PO_REQUSITIONS_INTERFACE with AUTHORIZATION_STATUS as approved only.
As per the present code and functionality, we create the requisition with approved status only.
Therefore, additional lines may not be added to the requisition.
AutoCreate Purchase requisition concurrent program or progress order from the sales
order pad, shall create a requisition for a booked ATO buy item line if there is open
quantity on the line. This is designed functionality. (By open quantity we mean the
order qty that is not reserved to a supply).
If you want to prevent autocreate purchase requisition from processing the line as you
are already having an existing PO for it you can achieve it in two ways -
1. Put the line on create supply hold immediately after creating the sales order.
Autocreate Purchase requisition will not pick such a line. Thereafter, you can
manually reserve the existing PO to the order line and remove the hold. Once
the entire quantity on the line is reserved to a supply, it is no longer eligible to
be processed by autocreate purchase requisition and will not create another PO.
2. CTO provides a custom hook CTO_CUSTOM_SUPPLY_CHECK_PK. You can
add logic here to prevent CTO from trying to create supply. Please refer to CTO
Process Guide - Setup - Custom Check Supply Creation API.
To locate manual, see
Oracle Configure to Order Release Notes, Release 12.1.1 (Doc ID 789425.1)
Then select Oracle Configure to Order Process Guide, Part No. E13692-01, April 2009
search for manual, open it.
Hope this helps.
Regards,
Paarthy
Edited by: Paarthy on Mar 16, 2012 5:52 AM

MI First Sync - Outbound Waiting status MAM

Hello:
I have a problem, when I make my first Sync in the merep_pd appears a Waiting status in all my syncBOs in the outbound. And the menu of the MAM doesnt appears. Anyone could tell me what is the problem. How the status can be change to Finish?. Please.
Thanks
Mario

Hi Mario,
You need to replicate MAM25_09% syncBo for every new user created on the client to get the links and the data for the user.
For replication select the syncBo in merep_pd and click execute button just above the table.
Regards,
Rahul
Don't forget my points
Message was edited by: Rahul Gavande

During downloading the new version, it stops with a "waiting" status when Internet's cut happened. Since, impossible to restart or to download again. Help !

During downloading the new version, it stops with a "waiting" status when Internet's cut happened. Since, impossible to restart or to download again. Help !

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How can I know if a manually created Journal Entries has not been paid yet?

Hi There.
I'm passing through the following situation: I need to find out which Journal Entries that have been manually created ( TransType = 30 ) don't have an Outgoing Payment record associated
Lets suppose that I manually created a Journal Entry. Let's call it OJDT_MAN
Then, I went to the Outgoing Payments Form ( Modules -> Banking -> Outgoing Payments -> Outgoing Payments ) and paid OJDT_MAN.
This process will create another Journal Entry. Let's call it OJDT_AUTO.
I can't find in the database anything that indicates that OJDT_MAN has already been paid. I tried looking for a Status field; Checking if OJDT_AUTO had some code that could get me to OJDT_MAN ( I found BaseRef and TransType = 46, that can guide me to the new OVPM record ); Tried looking at the new OVPM record for some field that could lead me to OJDT_MAN, but I had no success at all...
So, in resume, and again, how can I know if a manually created Journal Entry hasn't been paid?
(When I go to the Outgoing Payments Form and select a Business Partner, it B1 shows me only the not paid ones... How does he knows it? )

Just to make it more clear, the SQL we were looking for is this:
Select
From
OJDT
Where
OJDT.TransId Not In ( Select VPM2.DocEntry From VPM2 Where VPM2.InvType = 30 )
And
OJDT.TransType = 30

Effect of manually created proposal on MRP Run

if there is any proposal which might have been created by the user manually & not via MRP run, does it have effect on the results of MRP.
will the system ignores the requirement as it has been covered already via manually created proposal.

Dear Geetika,
if there is any proposal which might have been created by the user manually & not via MRP run,
does it have effect on the results of MRP.
Yes definitely it have effect on MRP
MRP checks All Firmed Receipts & creates procurement proposals
will the system ignores the requirement as it has been covered already via manually created proposal.
Say for example demand is there for material as 50 PCS
Now manually user created Production order for that 50 pcs
Now if run MRP than system will not create any plan order as already Production order consists for 50 pcs
Again we have add demand for the same as for another 50 pcs
so now total demand became for that material is 100pcs
Now Run MRP system will create plan order for 50 pcs
As we have already 50 pcs of production order which is created manually
Hope the above clarifies
Regards
Madhu

Need to personalize the Remittance screen making 'Manual Create' Button invisible

Dear All,
I highly appreciate you people responding to my before questions. All are solved/clarified.
Below is the requirement from my friend, I am trying to help him. Please suggest.
In Receivables>Receipts>Remittance screen
Need to disable the 'Manual Create' button, if the user selects the 'Receipt Method' field as 'XX_REC_METH1'.
I tried just to disable the 'Manual Create' without the receipt Method condition, even that also doesnt work.
Version : R12.1.3
Function Name: AR_ARXRWMAI_REMITTANCES
Form Name: ARXRWMAI
Manual Create Button: AR_BATCHES_SUM. REMIT_MANUAL_CREATION <block>.<field>
Receipt Method: AR_BATCHES_SUM.M_REMIT_RECEIPT_METHOD_NAME <block>.<field>
Kindly suggest any work around.
Thanks a lot in advance.
Regards,
Afzal.

Hi Afzal,
your question is about an eBusiness Suite form. Our forum here (and the team that moderates it) deals with Fusion Applications questions.
Please repost this question in one of these forums that deal with EBS:
Technology - General Discussion
Financials
Thanks for your understanding.
Regards,
Oliver
Fusion Apps Developer Relations
https://blogs.oracle.com/fadevrel

Manually create WT in "Waiting" Status.

Similar Messages

Maybe you are looking for