Manually entered packing instruction ID could not be checked

Dear JP,
When i use t-code: pop1, the system occurs this information: Manually entered packing instruction ID could not be checked.
Please tell me how i can solve this problem? The detail information as below,
Message no. VHU01116
Diagnosis
There is a number range object for the packing instruction ID. It is likely that the number ranges (intervals) for this number range object are wrongly defined, or not defined at all.
System Response
The system could not check the packing instruction ID.
Procedure
Check in Customizing (Handling Unit Management -> Automatic Packing -> Packing Instructions Master Data -> Define Number Ranges for Packing Instructions (or transaction OPIN) whether the following intervals are defined:
No. From No.                                To No.                                      No. Level    Ext
01 00000000000000000001 99999999999999999999    0
02 A                                               ZZZZZZZZZZZZZZZZZZZZ                    X

Hello,
Try using tcode OVHU2. Here you can choose e.g. outbound delivery if you want to assign a procedure to outbound deliveries.
Refer following link for details on packing and it configuration.
Packing instruction determination
Thanks & Regards
JP

Similar Messages

TS1398 I am getting when manually entering wifi info of "Could not scan for wireless networks" wireless is working on other devices, how do I cure this? The problem only began when I updated software on the phone. Previously I had no problems with wifi.

After updating software on Iphone (wifi worked fine before the software update) I now can not get on wifi. The phone with not find a working wifi network nor can I connect manually. Wifi is working on other devices. I have turned the phone on and off, turned the wifi router on and off and reset the iphone and down loaded updated software to the phone. Nothing has worked. Does anyone have an answer for this problem?

Could this be the problem?
iPhone 4 Modem Firmware : 3.0.04
iPhone 4S Modem Firmware : 2.0.10
Wifi is working on my iPhone 4, NOT on 4S -
Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
I am so tired of trying to figure this out.
The Wi-Fi addresses in the About settings are different on both phones too.

"This document could not be checked out." SharePoint 2010 checkout action using IE8

I am setting up a two-server farm, and most everything works, except the checkout action for a document. This problem occurs in both site collections, one of which requires checkout, and the other does not.
Here are the options I've tried:
Snow Leopard, Firefox 3.0.1 - works
Snow Leopard, Safari - works
Win 2003, IE 7 - works
XP, Firefox - works
XP, IE 8 - "This document could not be checked out. You may not have permission to check out the document or it is already checked out or locked for editing by another user."
In IE8, I am able to open a document as read only then use the button presented by Word to check out the document. I cannot use that as a workaround, as not all users have a version of Office that will allow checkout in that way.
Checkin works fine. I need to resolve the checkout error.

I was having the same problem mentioned here. I noted that this problem only appears when I use the FQDN in the URL ex 'http://hostname.domain.com/default.aspx'. If I access the Sharepoint site using the URL 'http://hostname/default.aspx', then
I do not have any problems checking files in or out.
I ran into this same error pattern when trying to do a document edit (library is set to force a check out), or do a direct check out via the ribbon menu or item context menu. Oddly enough when we would use the 'Edit Properties' ribbon button (which forces
a check out) we did not get an error and the document's status would change to 'checked out'. Below are the two messages we would receive when trying to do a check out:
IE error message - "This document could not be checked out. You may not have permission to check out this document or it is already checked out or locked by another user." - Click OK
IE Error message - "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." - Click OK
After trying several different suggestions I realized that I wasn't having the problem when I was accessing the site locally via FQDN but only when I was using the Public Site URL (via https). Turns out we were getting the error because we did not have
an AAM currectly setup. Once I changed our AAM for the Internet zone with the Public URL value instead of the FQDN the error went away.
Hope this helps anyone else trying to track this down. Oh and this was SP2010 w/SP1 (Patch version 14.0.6106.5001) on Win2008 R2 with clients running both Win7 and WinXP using IE8.

The data from the infoprovider involved could not be checked'

Hi all,
In the the selection screen of the virtual provider through the option display data, am getting message text " the data from the infoprovider involved could not be checked" , and then it brings all the data from the r/3 function module irrespective of the selection by date in the virtual info provider. I am retrieving the data from r/3 function module(RFC) to bw function module assign to virtual infoprovider.
with regards,
Ram

Hi
A Virtual Provider does not store data. to view the data in it you will have to use it in a query and check its data.
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

09: order could not be checked

Experts,
I am getting the following message when I do a collective Availability Check via MDVP:-
"09" (order could not be checked). I have checked the Material Master several times over, but I am not able to find the issue. What setting do you think is missing? There are some materials where that message is not given but for a lot of them I am getting this message and not able to carry out a collective Availability Check. I assigned the same MRP group, MRP controller, Strategy group etc.. as the one assigned to the material that worked.
Your help will be greatly appreciated.
Regards,
Madagex

Hi,
I need the Availability Check to run against Individual check and maybe ATP, and both of them do not work. However, the against planning does work, but will not be useful.
Regards
Madagex

Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

Have you tried re-booting your WiFi router ? It may seem OK on your PC, but a re-boot may help.

'The data from the Infoprovider could not be checked' message

Hi,
   Recently we upgraded our BI system from 3.5 to BI7. Now I am displaying the Infoset data using LISTCUBE and received the following message,
                      ' The Data from the Infoprovider ZIS_PRMS3 involved could not be checked' where ZIS_PRMS3 is a Infoset.
However If I ignore that message I am able to see the data and query also displays proper data. But my doubt is why this message appears? and what could be the reason for this?. (Before upgrade we didnt get this type of message)
I searched in SDN and found some threads talk about this. But not able to identify the reason for the message and how to suppress it.
Infoset contains 2 ODS and 2 Infoobjects, all the join conditions are perfect. Can anybody through some light onthis.
Thanks.
V.Senthil

Hi Krishna,
    Thanks for the reply. As mentioend I have reactivated my Infoset, but still I am receiving that message.
I dont know what could be reason still. Waiting for the replies.
Thanks,
V.Senthil

PRT availability could not be checked

Dear All,
when I want to make a PRT availability check for "Production Resources/Tools" in MD04. When I start it I get the following error:
PRT availability could not be checked
Message no. CO285
Diagnosis
The availability of the PRTs (production resources and tools) could not be checked for one of the following reasons:
There are no control parameters defined in Customizing for this plant and order type.
The control parameters defined in Customizing do not permit availability checks.
There is no checking rule defined for this plant and order type.
Procedure
Go into Customizing and check the corresponding control parameters for checking the availability of PRTs.
On the material master the setting for availability check is defined. For all other materials it works but not for "Production Resources/Tools"
Can you please help me with that. Which setting is missing?
Thank you very much.
Best regards,
Markus

Hi,
You need to define
1. Checking group
2. Checking rule
3. Scope of check
4. Checking control
In defining the checking control you need to define availability check for the PRT is required or not.
This has to defined for each order type/plant combination.
Also you need to define whether you want PRT availability check to be carried out during order creation or during order release.
Assign the scope of check in the Material master MRP 3 view.
Thanks,
nandha

The data from the InfoProvider XYZ involved could not be checked

Hi team,
i am making one infoprovider, in which i am joining one DSO with one infocube,
the dso and infocube both have data , however when i join them and create an infoset and when i do display data i receive the following message
"The data from the InfoProvider XYZ involved could not be checked", and i cant see any records
plz assist if any one has face such issues
Regards
Blusky

Hi,
yes i do have data, i have one issue, when join occours does it occurs on SID or actual column
Means
Table1
C1       SID
CHN     2
Table 2
C1     SID
CHN    4
Now when i join them at C1 then CHN = CHN but SID <> SID of T2 , just confused here what exactly happens in back end..

The data from the infoProvider 0coorder involved could not be checked

While displaying data from the Multiprovider in BW, I am getting these warning messages.
1. Selection for charcteristic 0COMP_CODE could not be checked.
2. The data from the infoProvider 0coorder involved could not be checked.
Please let me know why i am getting these warning messages and how i can fix them up.
Thanks in advance.
Regards
Harman

if this is for Infoobjects why don't u use Infoset instead of Multiprovider?
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Thanks and regards

Creative Suite 6 Design Standard serialnumber could not be checked

I bought the Creative Suite 6 Design Standard Version for students and teachers (MAC) five days ago. Download had been succesfull. But when I enter the serialnumber, there comes the error message:
"The serialnumber is unverifable. Please apply to support."
I need the programs. What should I do know?

Serial number issues cannot be handled on a public web forum. Use Web Chat here:
Serial number and activation support

Packing instructions - problem with external number range

Hi Gurus:
I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
I appreciate your valuable input
Tamas

For further records:
we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

Value string (primary key) could not pass to entity bean

database server 3.23.57
application server Jboss 3.07
ide jbuilder8
i am using session bean to wrap entity bean where it calls for entity bean to lookup the databse.
value entered in client application could not be passed from session bean to entity bean.
it is a jtextfield thta capture string as input which is the customer id. it is also the primary key. session bean managed to get the value but it was then became null when i pass to entity bean.
may i know wat could be the problem that is causing this?
application server not suporting this feature???? or it is th elogic problem .. or i have miss ot some code somewhere.?

Sounds like a code problem.

ITunes fails to update - 'Could not open key...'

I am having trouble installing the latest iTunes update bith through Apple Update and by trying manually.
I get a 'could not open key' error followed by 'UNKNOWN/components/.......'
Quicktime updates fine but Safari 5, iTunes and iCloud Control Panel all failed with the same message.
I am completely stuck.

Let's try the following user tip with that one:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

I was trying to update my ipad software to IOS ver 8 but it was hung and I could not even power off

I was trying to update my ipad software to IOS ver 8 but it was hung.
iTune prompted me to enter password as it could not be connected but ipad is hung.
Tried to power off to restart but could not

Have you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Manually entered packing instruction ID could not be checked

Similar Messages

Maybe you are looking for