Manually importing greetings and name id wav files to Unity Connection7.1(3)

We are going to be doing a fresh install of Unity connection in one of our sites. The current Unity is version 4.0(4) running on a windows 2000 server. Because the hardware, software and the OS are so out of date and buggy we don't want to attempt any upgrades on the server, we want to rebuild the system on new hardware. My question is, can we copy and paste wav files from the current unity to the new unity connection 7.1(3) server? We want to be able to copy the end users greetings and name id's for them in advance.
Please let me know if you do.
Thank you.
Rgds,
Vicky

Hi
I normally use COBRAS for this type of upgrade - basically you can run the export tool on your Unity server to export subscriber data, greetings, and even messages if you want. You then run the import tool for Unity Connection to push the users into the new server and map them to new CoS, schedules etc.
Unfortunately you do need to be running Unity 4.0.5 in order to get the export to work, but for the sake of a smoother migration it is worth the effort.
Search for COBRAS on this forum to see mroe info on it, or get the software from this link:
http://www.ciscounitytools.com/SiteList/AllDownloads/alldownloads.html
It's also worth reading through the help files to see what it can do, or maybe looking at the vids.
Regards
Aaron
Please rate helpful posts...

Similar Messages

Import wav file in Unity 7 for subscriber greeting?

We are updating info on the voicemail for our general mailboxes on all of our sites. The recording I have to make is long and basically the same for all the sites. Is there any way to import a greeting or copy and paste a wav file in to Unity so I can use one recording and don't have to record a minute long recording 16 times that I will screw up 100 times?

Ahh... You wrote 'unity' and my brain added the 'connection'. Sorry about that. From memory, it's a really similar process though. I did leave out a step though. In unity connection, after going to the greetings section you have to select the greeting you want to update/review (standard, alternate, etc). Then scroll down for the "play/record" button. I don't have a unity server to check but am hoping thatwill be close enough to get you there.

FLASH CS3[AS3] – MICROPHONE – RECORD AND SAVE AS WAVE FILE

HI,
I need solution for this one.Can we record,play and save an audio using flash CS3 astion script.
It should be something like this:http://justflash.byethost12.com/microphone/microphone_recandsave1.html
I have searched for the soluiton but i found it in flash cs5.I need it in flash cs3.
Looking for the solution.
Thank You

Hello Jeff,
From the LabVIEW Help description:
Sound File Write Simple (Windows, Linux)
Writes data from an array of waveforms to a .wav file. This VI automatically opens, writes to, and closes the .wav file. Windows You must have DirectX 8.0 or later to use this VI. Linux You must have the Open Sound System (OSS) driver to use this VI.
So, the data input to Sound File Write Simple.vi is an array of waveforms. However, if you only have one waveform, you can build an array that contains only your single waveform using the Build Array VI. As described in the LabVIEW Help description:
Build Array
Concatenates multiple arrays or appends elements to an n-dimensional array. You also can use the Replace Array Subset function to modify an existing array.
So, for example, you could run your single waveform into the Build Array function and get an array of waveforms containing only your waveform. You could then wire this array of waveforms to the Sound File Write Simple.vi. This is shown in the image below.
Message Edited by Matt A on 06-28-2007 09:58 PM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
Build Array.JPG ‏11 KB

Why can't I manually fill in info for some WAV files?

I've been importing wave files into itunes and filling in the artist info manually, one cd/playlist at time, with the intent of later converting the entire library to apple lossless. I need to do it this way because importing one CD at a time, I select the whole thing, and then fill in the info for the entire selection at once. If I import a bunch of files first I get a huge disorganized mess because there is no "tag" info. The problem is that, for some reason, artist info entered manually for some WAV files "won't take" but if I change to apple lossless first it will. Can anyone suggest a reason for this inconsistant behavior in the iTunes program?
Gerry

WAV files don't have ID3 tags, which hold a lot of the song info.
You might want to have a look at this wikipedia entry
http://en.wikipedia.org/wiki/ID3_tag

Logic and BWF/Interlaced .WAV files

Hi
I am new to Logic and indeed D.A.W's in general but not to sound recording.
Introductions aside
I wish to import polyphonic .wavs (files created on a sound devices 744t) into Logic in order to mix and separate the tracks.
It all appears to be straight forward however when I import the audio the individual tacks do not separate out on to different tracks, as I would expect them to do (It does it in audacity!!!). Instead I end up with a ''mix'' of all the tracks on one audio track.
I have looked in the manual and googled the problem but don't seem to coming up with a solution can anybody help.
Alan

It's very certainly something your colleague did that triggered the creation of new audio files. Check his audio file folder of the project, I'm pretty sure it will contain the new files along with the old ones.
Cheers,
Jazz

Record GSM and ADPCM in wav files

Hello,
is there any way to record .wav files using GSM and ADPCM format(tritonus implementation for example). I need to record .wav files in this formats and send then through a network to another computer.
Is somebody has a code example please, post it or send me it to my e-mail:
[email protected]

why these files don't work in iTunes 5. Perhaps there is a bug in iTunes?
A bug or a new "feature". ;-)>
The problem is unique to iTunes 5, as I said - I had no problems with any iTunes version through 4.9.
The important thing is I will still have access to the files for classroom use (and I also just plain listened to them as well).

Reading, filtering and playing large WAV files

Hi!
I want to build an application that reads LARGE wavefiles, filters them and plays them via the soundcard.
I tried to build something with the standard blocks available in Labview 7.0, but I keep running out of memory. The files I want to filter and play are simply too large The filesize is typ. 650Mb = 1 hour of stereo CD quality audio. The files I am using just won't play even on a WIN XP machine with 1Gb of memory.
Next step was to build a function that loads the WAV files in blocks of ~16kB. This works fine, but now the filtering does not work anymore; after each block, the 'FIR Filter' block seems to reset its states. The result is a very bad repeating artifact in the sound. The repetition-rate is related to the buffer size.
Does anyone have experience with this type of application? Help and examples are -very- welcome (as I am new to Labview... .
Many thanks,
Dr.dB

I have created a VI that will do the continuous FIR filtering you need. I assume you want to filter a 'stereo' signal so the VI takes an array of waveforms as input. In this version the FIR filter coefficients (kernel) is common to all channels. If this is not what you need you can correct the VI accordingly.
The control 'algorithm' specifies whether the FIR convolution is internally performed in the time or frequency domain. Changing the 'algorithm' does not affect your result but affects your performances. Select time domain (direct) if your kernel size (number of FIR coefficients) is, say less than 100, otherwise select 'frequency domain'.
Try the attached example and let me know if you have any problems.
Attachments:
continuous FIR filtering on multiple channels.llb ‏79 KB

ADPCM and GSM to wav file with RAWCONVERTER

Hi, is it possible to codify ADPCM and GSM in a .wav file with the RawAudioDataConverter(jsresources) or do they need a targetEncoding?. I have recorded GSM data in a wav file but I can't decode them.
Example of my GSM coder and decoder
AudioInputStream ais = null;
          AudioFormat.Encoding targetEncoding = null;
          AudioInputStream audioInputStream;
          File encodedFile = null;
encodedFile = new File("gsm" + audioFile.getName());
               try
                    ais = AudioSystem.getAudioInputStream(audioFile);
               } catch (Exception e)
                    e.printStackTrace();
               if (ais == null)
                    System.out.println("No se puede abrir el archivo");
               AudioFormat sourceFormat = ais.getFormat();
               if (!sourceFormat.getEncoding().equals(
                         AudioFormat.Encoding.PCM_SIGNED)
                         || sourceFormat.getSampleRate() != 8000.0F
                         || sourceFormat.getSampleSizeInBits() != 16
                         || sourceFormat.getChannels() != 1)
                    System.out
                              .println("The format of the input data has to be PCM 8 kHz 16 bit mono");
                    System.exit(1);
               AudioFormat.Encoding targetEncod = new AudioFormat.Encoding(
                         "GSM0610");
               AudioInputStream gsmAIS = AudioSystem.getAudioInputStream(
                         targetEncod, ais);
               AudioFileFormat.Type fileType = new AudioFileFormat.Type("GSM",
                         ".gsm");
               int nWrittenFrames = 0;
               try
                    nWrittenFrames = AudioSystem.write(gsmAIS, fileType,
                              encodedFile);
               } catch (IOException e)
                    e.printStackTrace();
               }Example of my GSM decoder:
private File decodificar(File FileIn)
          AudioInputStream ais = null;
          File in = new File(archivoCodificado.getName());
          File FileOut = new File("decod" + in.getName());
          try
               ais = AudioSystem.getAudioInputStream(in);
          } catch (Exception e)
               e.printStackTrace();
          if (ais == null)
               System.out.println("cannot open input file");
          AudioFormat.Encoding targetEncoding = AudioFormat.Encoding.PCM_SIGNED;
          AudioInputStream pcmAIS = AudioSystem.getAudioInputStream(
                    targetEncoding, ais);
          AudioFileFormat.Type fileType = AudioFileFormat.Type.WAVE;
          int nWrittenBytes = 0;
          try
               nWrittenBytes = AudioSystem.write(pcmAIS, fileType, FileOut);
               System.out.println("AudioDecoder: written (bytes): "
                         + nWrittenBytes);
          } catch (IOException e)
               e.printStackTrace();
          return FileOut;
     }I think that it might be well recorded but it doesn't works, giving and exception. I think that its all right because the number of byts in my GSM recorded file is about the tenth part of a PCM lineal file, and when I try to reproduce it with winamp for example it detects a sound track but it can't calculate the length of the GSM file(wav extension I mean)

QuickTime Player X does not export WAV. You could use QuickTime Player 7, which if it's not in your Utilities folder already can be installed from the Optional Installs on the Snow Leopard install disk, but you'll need to purchase a QuickTime Pro key.
Regards.

When I drag and drop a wav file into garage band it is rejected. How to imposrt a wav file?

Hi Everyone,
I want to edit a voice recording, done in WMA format, in Garage Band.
I saw a video in which the fie is simply draged and dropped in the timeline area, and the time line appears. Then youcan edit it.
But when I drag and drop this WMA file into the editing area, it jumps back out to where I dragged it from.
Is there any way to import WMA files intoGarage Band?
Thank you, Giorafromny

Giorafromny wrote:
Is there any way to import WMA files intoGarage Band?
not directly, you'll need to use some software to convert it to a format supported by GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#importformats
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT4229 Does Logic Pro or logic express allow me to plug in a Halion VST player or to import and play VST wave files on any other player plugin?

Hi
Can I plug Halion 2 into Logic Pro or Logic Express? Or another VST player?
I cant find out how....

Logic unfortunately does not support any VST's by themselves. Rather they support AU's (Audio Units). So you cannot plug Halion 2 into Logic easily.
However, I have heard that you can install an AU called Plogue Bidule that allows you to run VST's. It acts as a sort of middle man so that you open the AU that opens the VST. I don't know too much about it, but it appears that they have some content on their website to look at if you are interested.
Hope this information helps!
Ryan

My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person.

Scan and name a PDF file before Emailing

I have a client who scans a lot of files into PDF via Acrobat and then emails them. When she does this, the file name in the email is "untitled.pdf" (File > Attach to Email). She does not need to save copies of these PDFs to her machine, but she would like them to have a more descriptive name before attaching them to email. Does anyone know how to name a file once it's scanned and before it's emailed? This could save a lot of time for her. Any help is much appreciated!!

What do you mean by scan -- a page of paper with a scanner or something else? Do you have Acrobat?

Opening file in Illustrator prompts "Text Import Options" and does not open file correctly.

I've been dealing with this issue for quite a while and I am thoroughly stumped. A co-worker has emailed me .ai files in the past without issue. In the last couple months, however, her attached .ai files no longer open properly.
This is the first screen I get when trying to open the files:
Regardless of what checkboxes are marked or options changed, the outcome is always the same:
If you can't read that, the error code is as follows:
{"Body":{"ErrorCode":500,"FaultMessage":"Unable to get write stream for mac attachment.","IsTransient":false}}
Putting this line of code into Google returns exactly "0" finds.
Nobody else in the company seems to have an issue with opening the same file when this co-worker forwards it to them. I did notice, however, that the file is 141 kb within her email, but when I download it, it shrinks to 344 bytes. I don't know if for whatever reason my computer is just not downloading all of the information or what might be going on.
To reiterate, these are the facts that I know:
1. She is on a mac and I am on a PC.
2. We are both using Illustrator CS6.
3. Other co-workers on PCs do not have this problem when she emails it to them.
4. The file shrinks from 141 kb to 344 bytes when I try to download it from her email.
Edit: I just had her send the email to my personal gmail account and the file opened perfectly, so this appears to be an issue with office365.com which is where my business email is located. Everyone else here uses the same email service, however, so this is still an isolated issue with my account.
Any help or ideas would be very much appreciated.
Thank you!

Thank you for the reply. We went through a lot of different ideas to try and fix this, but zipping the file never even crossed our minds for some reason... :\

Identify modified date/time and name of SOURCE file

I can't seem to find a way to store/retrieve the last-modified date/time of the SOURCE file (as well as filename) used to create a PDF. I looked into the default metadata, but it seems to store only the last-modified date of the PDF.

I'm sorry, maybe I'm a little slow, but I would need more detailed specs on how to solve the problem. Is this something you have implemented yourself? If so, how?

ITunes will not import wav files

iTunes will not allow importation of Apple Lossless or WAV files. It will allow AIFF files to import but won't play them.
Any ideas will be helpful.
Thank you: Patrick

Are you positive they didn't import, or is it just that there aren't where you expect to find them? The thing about wav files is they don't accept tags, so if you import them they will just get added under the filename.
I would just copy across the whole media folder with libraries and all, then start iTunes with the option key held down and point it at the media folder. This will just use the library in its new location and you don't have to import, etc.

Manually importing greetings and name id wav files to Unity Connection7.1(3)

Similar Messages

Maybe you are looking for