Manually inserting rss code...

hello,
in the past when i've worked outside of iweb it just takes a simple line of code to get my site to point to my rss feed. i just need to insert the code in the header of each page. with iweb i have tried this with html snippets but the only way that has worked for me is to manually insert the code in the completed pages. the only thing is every time i update my pages i have to reinsert the code since i'm doing it after the iweb publishing. is there an easier way to do what i need? i prefer not to use the standard blog page that's why i'm asking...
thanks,
rick

The code is locked because it is re-generated every once and awhile. If you were allowed to edit it, your changes would just be overwritten. The code generator is fairly flexible, and you can insert your own code at certain points, like pre-init and post-init for variables, using the property editor. Maybe you could post the part that you would like to edit, then the changes you want to make, and I might be able to suggest a way you could do it just using the form editor.

Similar Messages

  • I followed all instructions for redeeming a coupon for movies.  Inserted digital disc as instructed and manually entered redemption code.  Nothing.

    I followed all instructions for redeeming a coupon for movies.  Inserted digital disc as instructed and manually entered redemption code.  Nothing.  Laptop camera refused to take picture.  Entered everything manually but instructions keep saying insert digital copy of the disc.  I did.  Instructions keep repeating.  I'm in movie ****.

    Hey fattymoko,
    Welcome to Apple Support Communities.
    I imagine that would be frustrating, to not be a able to redeem an iTunes Digital Copy with the Digital Copy code and disc. Did the movie come with more than one disc or has the code been used already? Try taking a look at the article linked below, it provides tips that will resolve most issues redeeming an iTunes Digital Copies.
    Redeeming an iTunes Digital Copy - Apple Support
    Having trouble with iTunes Digital Copy?
    If your Digital Copy DVD or Blu-ray is damaged, scratched, or missing its redemption code or Digital Copy disc, contact the appropriate studio for help:
    20th Century Fox
    Disney
    Lions Gate
    Paramount
    Sony Pictures
    Universal
    Warner Bros.
    If you're having trouble redeeming your Digital Copy code or downloading your iTunes Digital Copy, contact iTunes Store Support.
    Learn more
    iTunes Digital Copies aren't available in every country.
    You must use a Digital Copy code in the iTunes Store country where the packaging says it will work. For example, you'll need a U.S. iTunes Store Apple ID to use a code from a U.S. DVD, and you'll need an Australian iTunes Store Apple ID to use a code from an Australian DVD.
    Take care,
    -Jason

  • ME32L - impossible to insert tax code (IVA) in schedulling agreement

    Hi Experts,
    I am not able to insert tax code(EKPO-MWSKZ) manually in schedulling agreement using ME32L.
    when i give the value in TAX CODE and save data is not being updated.
    Can you please help me out in this.
    Regards,
    Jayant.
    Edited by: shetty jayant kumar on Jul 28, 2009 11:33 AM
    Edited by: shetty jayant kumar on Jul 28, 2009 11:35 AM

    Hi Experts,
    I am not able to insert tax code(EKPO-MWSKZ) manually in schedulling agreement using ME32L.
    when i give the value in TAX CODE and save data is not being updated.
    Can you please help me out in this.
    Regards,
    Jayant.
    Edited by: shetty jayant kumar on Jul 28, 2009 11:33 AM
    Edited by: shetty jayant kumar on Jul 28, 2009 11:35 AM

  • How to insert abap code in LSMW generated program?

    hi,
    i m working on LSMW for loading data in SAP
    i would like to insert abap code into the generated program....
    it's because i have 1 BKPF segment (header data), 2 BSEG segments, but i cannot define rules by customizing for the second BSEG segment(LSMW doesn't permitt).
    i already tried to insert code directly into the program, but obviously it disapears at each time i generate the program.
    i saw that apparently a code insertion has already be made into this program and the subject of this insertion is to define rules for the second BSEG (exactly what i want to do....) and this modification doesn't disapear at new prog generation.....
    Any idea ?

    Hi
    Why dont you use the FORM provided by LSMW
    To use this please do the following
    1.Goto option <b>Maintain Field Mapping and Conversion Rules</b>
    2.Goto menu <b>EXTRAS->LAYOUT->Form Routines</b>
      Here you will now get many options like
       Global Data
       Begin of Transaction
    Begin of Processing
    Begin of Record
      like wise the End of these also.
    Please put a breakpoint and check where you want to insert your code.
    Note:
    This is only for the Conversion Program and does not affect the main program used to update the Standard Tables
    Hi , I was reading your earlier post .. It seems that you have worked on EMIGALL. Consider a similar situation, it is like writing the code in the events till CALL01...
    Thanks
    DOminic
    Message was edited by: Dominic  Pappaly

  • How can I insert a code to switch between channels?

    I’ve got a HP4263A LCR meter which is being used with an ER-18 device to get multiple channel data acquisition, when I go to getting started to trigger the device, but this VI do not have an icon to change the channel how can I insert a code to switch between channels?

    I am just trying to use the drivers developed by NI for this device, but I don't know how to work on them to obtain data from three points, or three channels which I am using from an ER-16 device. So all what I have is the driver VI for the HP4263A.the only VI I can use is getting started, because whe I try to run any other one, this message appears:
    Error -1073807346 occurred at VISA Write in HP4263A Self-Test.vi.
    Possible reasons:
    VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
    your help would be very helpful
    thanks

  • Help with inserting counter code

    hi friends, i want to put an invisible counter on my website but i cant seem to do it. i got the counter code from statcounter and i also downloaded a trial version of bbedit. in bbedit when i do a search for the code i have to replace bbedit comes up with nothing on the search, im not html savy in the slightest...can somebody walk me through this step by step.

    If you want to insert the code by hand, just open each page.html file and scroll to the end. You will see a <body><html> tag. Just copy and paste your code before the <body> tag and the save.
    But if you want an easy and automatic way to do this for your pages...just download iComment 3.0. Launch it and paste your StatCounter code in the appropriate window. Then point iComment to your Sites folder and click Go. It will place the StatCounter code on every page in your site.
    If you don't want to do the Haloscan commenting, you can just leave that blank in iComment.
    James
    http://www.dirtdoog.com/

  • How to insert a code for a function module into a Customer Exit Variable?

    I have two Key Figures viz., Net Prchs Rtl, and Net Prchs Unt. Both these Key figures have This Week (TW) and Last Week (LW). There is a variable for This week but there is no variable defined for Last week.
    I need to get data in the column LW (Last Week) for both the key figures.
    In function module EXIT_SAPLRRS0_001 one of the functions I have is:
    Get the previous Fiscal Week
              CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    I need to create a new variable to get values in the Last week column for different key figures and use function “'DATE_TO_PERIOD_CONVERT'” in that variable.
    Can anyone please explain me the steps as to how to use a function module in a variable so that when the variable is used in a key figure it shows the output.
    In other words what I want to know is after creating a Customer exit variable of type Characteristic value how do I refer the above mentioned function moduel and insert the code for the function module into the Customer exit variable that I created.
    Thank you.
    TR.

    Hi Wond,
    Thanks a lot for your reply. I understand what you mean but I have never done this before so can you please explain it in a detailed manner. I have the following code:
    Get the previous Fiscal Week
              CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
                EXPORTING
                  i_date         = ld_date
                  i_periv        = lc_periv
                IMPORTING
                  e_buper        = ln_poper
                  e_gjahr        = ln_bdatj
                EXCEPTIONS
                  input_false    = 1
                  t009_notfound  = 2
                  t009b_notfound = 3
                  OTHERS         = 4.
              IF sy-subrc <> 0.
                MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
              ELSE.
                lc_poper = ln_poper.
                CONCATENATE ln_bdatj lc_poper+1(2) INTO wa_e_t_range-low.
                wa_e_t_range-sign = 'I'.
                wa_e_t_range-opt = 'EQ'.
                APPEND wa_e_t_range TO e_t_range.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
    I believe I should now use the above code in my customer exit variable. If that's right can you please explain me the steps as to how should I do this so that the variable gets populated.
    Thank you.
    Regards,
    TR.

  • Inserting QR Codes into InDesign document ??

    Anyone know about inserting QR codes (those bar codes that are all over magazines these days) into InDesign?
    Someone I know is going to get me a QR code for a magazine advertisement  I'm creating. What is the standard format for this image I should get  to place into InDesign?
    Also, can I scale the image in InDesign? Or will that mess up the functionality of the QR code?
    (I'm delivering the whole InDesign file as a PDF to the publication.)
    Thanks in advance for any info!

    The standard for QR codes comes from Denso Wave (Toyota), the creator of the QR standard.
    From the Denso standard on their site:
    The size of QR Code depends on a module size and a symbol version. The module refers to the black and white dots that make up the QR Code. The symbol version determines the data capacity.
    The area of a Version 1 QR Code is made up of 21 modules per side. Each higher version number is made up of 4 additional modules. The highest version number is Version 40.
    For example, a Version 2 QR Code would be composed of a 25 by 25 module matrix. If the module size is 0.5 mm (19.7 mils) square, the size of QR Code will be 12.5 mm (0.5") square. (QR Code requires a four module wide quiet zone around the symbol.)
    Other than that, your size should be tested after output with something other than the latest smartphone, because a greater portion of people are using older technology that cannot focus very close. I've found that a QR code of .875" x .875" to be ideal for a basic URL without URL shortening, using a chunk of plastic trash called a blackberry. If your URL is superlong, your results mar vary.
    The iPhone 4 however, can scan a QR code 1 molecule x 1 molecule wide, if your audience is demographically hip enough to own one, by all means go for that.
    /snarkyfanboicomplete
    p.s. there are plenty of sites that will export you a nice clean vector EPS, so requesting a tif and converting it to a bitmap, while super fun, can be avoided by eps goodness.

  • Service Limits in Purchase Requisitions: Where to Insert Custom Code?

    The issue is related to finding a place in SAP logic where a BADI, or, an
    enhancement can be implemented when inside transaction ME52N for a
    Service Limits type Purchase Requisition where K is the Account
    Assignment and B is the Item Category for a Service Limit Purchase
    requisition. Especially. or initially, at the point of navigation when
    going from (within the Limit Tab) and selecting the Account Assignment
    Icon to the right.
    By finding a good place to insert custom code in between these two tabs
    during navigation I am referring to (1)the actuality of the transaction
    breaking into this location, and,(2)a place where the global fields can
    be read and changed ie. GL Account Number, Material Group, etc.
    I have read, and reviewed several SAP Notes: 496082, 627072 and 551863.
    Failed Attempts:
    1)I have tried finding BADIs via breakpoints inside of
    CL_EXITHANDLER~GET_INSTANCE. None that are found are used and are not ofany help.
    2)I have attempted to use various user exits within the following SMODs,to name a few:
    MEREQ001 |Customers' Own Data in Purchase Requisition
    SAPLF0PR |Requests: Account Determination and Checks
    SAPMF02H |Function exit: G/L account master data
    V45E0002 |Data transfer in procurement elements (PRreq., assembly)
    WDFE0001 |Customer-Specific Determination of Requirements Data
    COZF0001 |Change purchase req. for externally processed operation
    COZF0002 |Change purchase req. for externally procured component
    3)I have implemented various custom enhancements inside of SAP Main
    Program SAPLMEREQ inside include LMEREQF09, and a few other LMEREQFXX.
    4) We previously used BADI 'ME_PROCESS_REQ_CUST' to satisfy a similar
    requirement, but is of no help for this request.
    Thank-You,

    Custom tags are different than udfs.  Let's stick with udfs.  Your location choices are:
    1.  If only one template is going to use it, you can put it in that template.  Otherwise,
    2. You can put it in a .cfm file and cfinclude that file whenever you want to call the function, or
    3. You can put it into a .cfc.
    A little while back, someone ran some tests and posted the results on one of these forums.  The gist of it was that Option 2 would run faster than Option 3.

  • Insert JAVA3D CODE into a HTML PAGE

    My java 3d code is working perfectly with javac and java command. I can see the result of my game in the appletviewer
    But when I want to insert the code into a html page,it dosen t work
    the java applet remain grey....
    Can someone tell me why and someone can tell me how to solve it
    Could you give me an example of HTML page using java 3D code with mulitple classes

    I don't know Java3D, but I know a little applets. :)
    Are you sure your browser understands the 3D API ?
    applets work with AWT and JDK1.1, (it's your browser than run your applet and not your jdk 1.3 or 1.4), so peraphs you should download a plug-in to run Java3D in your browser ?
    for example, if you want to use swing, you have to download a plug-in in your browser.
    and another problem is that different browsers work differently with a same applet : for example, IE 6.0 don't run than IE 4.0 or Netscape 3.0
    it's the internet's way of life... :)
    Good luck,
    David
    PS : sorry for my english, I'm from Paris ! :)

  • Outlook 2013 - Insert HTML code into email

    Hi there,
    A simple question, or so I thought. How can I insert HTML code into an Outlook email?
    Thanks
    Dave

    You can inject HTML code into the message body via the Insert as Text option;
    Insert-> (Attach) File-> select the created htm-file-> press the down arrow on the Insert button-> Insert as Text
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • Google tell me to insert their codes a site map in the head section before the first body section.. but where is it on my welcome page?

    Google tell me to insert their codes for a site map in the <head> section before the first <body> section.. but where in exact terms is the head & body section on my 09 iwebsite?

    It's been a while since I had to verify my sitemap with Google, but if I remember, there were two options for verification. The one I chose was an HTML file verification. That's a file that would be put in your Site Folder in GoDaddy. Google would then crawl your site to verify that way. I found that much easier than putting a file in the website itself.
    It would be a file that looks like this:  googlebe235d8cb7e91037.html
    And would live in your Site Folder on Godaddy like this:

  • Inserting html code snippets

    I'm using Contribute 3 (version 3.11) and cannot insert html code snippets with this. But I'm rather confused as to what I need to upgrade to to do this.
    On the Adobe Help Center webpage it states that " Advanced Adobe Contribute users can use Adobe Contribute CS3 to add custom HTML code snippets to Contribute pages".
    So what is the difference between my version Contribute 3 and Contribute CS3?  And I know that there is now CS4 also, so assume that would be even better?
    I've spent quite a bit of time on the net trying to get to the bottom of this, and hope that someone will take pity on me and enlighten me!
    Thanks in advance.

    Joe, I'm told it should be in the Insert drop down menu if it has been enabled by the Administrator. Is there someone else involved with your site who could have disabled this function? I know that similar things have happened to me in the past.
    Anyway ... I have some good news to report. I downloaded the free trial of Contribute CS4 from the Adobe website yesterday. It took over an hour to download and I wasn't very optimistic that I would be able to get it to work but I did. There is indeed an "Insert html snippet" function and I have produced a test page with a booking engine on it as a result of inserting some code. I have not yet tested it with audio and video files. I will have the use of the free trial for 30 days so will be able to carry out some more tests before taking the plunge and upgrading.
    If you have the minimum system requirements I would say it is worth your giving this a try, Joe

  • Insert html-code at row level (td-tag)

    Hello,
    to control the layout of a tabular form, it would be advantageous to be able to insert html-code at row level (within the td-tag) of the region table, e.g. enabling us to set a class attribute: <tr class="strut">
    I don't see a possibility to do this within a region containing numerous elements.
    Thanks in advance for any hint.
    Thomas

    Thomas,
    Do you need to control each row independently of other rows? If so, you would need to have a look at using collections instead of the Tabular Form. APEX collections let you build your own custom 'tabular form' and you should be able to control each row individually.
    If, however, all you want to be able to do is apply a format to each row, this can be done in the template.
    Cheers,
    Colin

  • How do I manually insert track names from a homemade cd?

    My daughter made a cd for me from her itunes collection.  I now want to import it to mine but I only get track numbers.  The gracenote data base doesn't recognize anything and I tried an advanced search to no avail.  I assume there is a way to manually insert the information which will be extremely tedious and time consuming.  I think I hate all the things that are supposed to make my life easier and more enjoyable.  I spend more time trying to cope with it than I have enjoing it.  Can anyone please help me?

    If she makes a data CD (instead of an audioCD) it will have all the info when you import it.
    Right click - Get info.
    Select the info tab. Type the info you want

Maybe you are looking for