Manually installing driver for Oxford Instruments IPS power supply

Hi!
I am trying to install the driver for an Oxford Instrument IPS 120-10 power supply. I have found the neccesary driver on the Oxford Instruments site:
http://www.oinst-software.com/OIRI/docs/LV5drv/lv5drv.htm
My problems stems from the fact the copy of LabVIEW is on a non networked computer, so I have to download the driver on this one and transfer by a USB stick.
The driver was written for version 5.0 and I am operating 8.5, will this be a problem?
How do I install this file? When unzipped I have a collection of .LLB files and one .INI file but no further instructions.
I can't use the "find instrument drivers..." as its not connected to the internet.
Any ideas?
Thanks
Jon

The best place to place an instrument driver is in the instr.lib folder. That way, after re-starting LabVIEW, the functions will automatically appear on your palette.
You will have a mjor problem with the driver though. LabVIEW 8.5 will not open a VI written in 5.0. You would need LabVIEW 6.x or higher to open it and then save it. If you don't have any other version of LabVIEW, you might try posting the driver and ask for help in converting it.

Similar Messages

TS1538 i receive an error code 10 ( the device cannot be started ) when i try to manually install driver for iphone 4s in windows 7

Hi folks,
Can somebody enlighten me on manually downloading the driver for iphone 4s on my windows 7?
i tried reinstalling it several times as instructed in the artcle http://support.apple.com/kb/TS1538 but all i receive is an error code 10 saying that the hardware couldn't be started.
Thanks in advance for helping me out

Are you saying that you are running iTunes 10.7 now and it is still telling you to update iTunes?

Vi driver for Varian Dual HV power supply

hi, I'm looking for a driver for the Varian Dual and/or Multivac HV power supply.
if anybody has it, please let me know...
thank you
Andrea Milocco

Hi Andrea,
unluckily the instrument driver for your Power Supply is not available on NI site.
You can try to search the driver at link: Search Instrument Driver
Otherwise you could ask information about driver directly to the instrument constructor.
But if you know the commands to talk with instrument and if you are using Labview or Measurement Studio or LabWindows/CVI 7.x you can easily create the communication with the Power Supply through the Instrument Assistant.
Regards.
MarcoC

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Is there a IVI driver for Racal Instruments 1256 switching system ?

Is there any IVISwitch driver for the RI1256 switching system somewhere ? Is NI working on it since RacalInstruments doesn't seems to be interrested in this matter ?

Hi,
I am not sure how similar the 1260 series is, but we do have IVI drivers for it at www.ni.com/idnet. You may be able to get away with using this driver for your instrument if it is basically the same thing with fewer features.
If not, I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own driver, we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party ven
dors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument.
Hope this helps out!
Let me know if there is anythign else I can do for you.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Am trying to instal driver for HP 3600 laser printer onto my new laptop HP 625 need help

Am trying to instal driver for HP3600 printer onto my new HP625 laptop but keep getting message that I do not have IE5 or later and cannot instal until I instal IE5 or later. I have the lastet Internet Explorer so don't know why I get the message and why I can't instal the driver. Can anyone help me?
Ron Howie

RH, what Windows system? (32-bit or 64-bit)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB

My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
Please help Thanks :)
& i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
does detect it but fails to install the drivers.
My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
had offered (using the built in Windows Update in Control Panel)
I have got screen shots of it too.
http://shumayal.fileave.com/HDD.zip
PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
Thanks :)

Hi,
I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
After that, please refresh the USB Stack:
Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
. This refreshes the drive and the USB stack
Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
You may also try the Windows 7 built-in
Hardware and Devices troubleshooter.
Hope it can help you!
Best Regards,
Miya Yao
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread.

Error installing Driver for audio device in MS-6585 Motherboard

Hi,
I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
An error occurred during the installation of the device.
The data is invalid.
And in the Device status in the properties menu
The drivers for this device are not installed. (Code 28)
I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
thanks for any help
Suresh

It might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.

Problem when install driver for DKU-5 cable

After installing driver for DKU-5 cable follow guide line, i conected DKU-5 cable with my computer but there is error appear that is 'can not pass winxp logo testing'.So i can not complete install driver for DKU-5 cable.Please help me.Thanks.

When you get that message, just select "yes" or "continue anyway" and you should be fine.

Cant install driver for display adapter (pavilon dv3)

Hi! i cant find and install driver for display adapter. i see on device manager that without "ATI radeon 5400 seri"
someone help me! thanks
This question was solved.
View Solution.

Hi QuanTrinh
What driver are you installing? Is it this AMD High-Definition Graphics Driver or some from the AMD website?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

Install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite

install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite V 10.10.1 (I have the disk but it doesn't load the driver)

Hi @Peggysguy ,
I see that you are having issues installing the printer on Yosemite. I will certainly do my best to help you.
The CD won't support Yosemite. You just need the newest drivers to install.
I have provided you with the downloaded Full Software drivers for the Laserjet Pro CP1525nw.
HP LaserJet Professional CP1525 Color Printer Series Full Software Solution.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Problem with Time Capsule used with an External Hard Drive (with it's own power supply)

I have a mid 2012 Macbook Pro with Mavericks installed. I have the latest Time Capsule (802.11 ac) with an external hard drive hooked up via the USB port. The external hard drive was taken from an older Mac desktop machine and is formatted correctly (Mac OS Extended Journaled). The external hard drive has it's own power supply and shows up fine when connected directly to my laptop.
For whatever reason I CAN see the hard (LAN Storage) when in AirPort utility but I CANNOT find or access the drive from anywhere within the Finder.
My finder settings are set this way:
My FInder appears this way, with the Time Capsule selected:
As you can see, the "Data" drive isn't displayed (it's not on the TIme Machine mounted drive either). The external drive "LAN Storage" isn't availailable anywhere either.
I've tried unplugging and restarting my Time Capsule and the External Drive with no luck.
Any advice?
Thanks.

Welcome to Mavericks.. and its new concept of network drives not just being hard to find like in Mountain Lion but totally invisible.
Apple changed over Mavericks to using SMB2 by default.. broken and flawed SMB2.
Change over to AFP by manually mounting the TC drives.
I strongly recommend the first thing you do is change the TC names to SMB standard.. that just helps.
Short, no spaces and pure alphanumeric.
So rather than the very Generic THE Airport Time Capsule.. you make it even more Generic with TC1 (each subsequent TC increment the number. )
LAN Storage is not a good name either for USB drive.. especially now that it is WAN Storage.. WStore for example.. but whatever makes sense to you.
The name itself doesn't matter. .following the rules, short no spaces and pure alphanumeric does. Everything, conforms.
Now in Finder.. Go, Connect to Server.
AFP://TC1 or AFP://10.0.1.1 (you can use either the name (now that it is proper network name) or the IP address .. replace with your actual name or IP).
The computer will find the resources and then ask you for a password.. this is required, even if default,, which is public.. so type in your password or public if you did not change it.
Store the password in your keychain.
The TC should now mount and all the resources on it be made available or visible.

Unable to install driver for GTX 650 Ti on HP Pavilion p7-1187c

Greetings,
I have an HP Pavilion p7-1187c with integrated graphics (DX 10.1) on a IPISB-CU (Carmel 2) motherboard. I upgraded the power supply to a Corsair 550 (no problem) and then installed a Gigabyte GEFORCE GTX 650 ti graphics card. THe card is getting power judging by the fact the fan is spinning.
When I attemped to install the driver from the CD supplied by Gigabyte, I immediately get the message: This graphics driver could not find compatible graphics hardware so was not able to install." I'm a computer novice so this message means nothing to me. Any help as to what the next step should be would be greatly appreciated. Is it possible that my motherboard simply will not allow for a separate graphics card?
I needed to upgrade the graphics card to be able to run X-Plane 10.
Thanks again for any help.
Leon
This question was solved.
View Solution.

Hi Leon,
The NVIDIA 650 TI requires auxillary power via the PCI-E 6 pin power connector to fully power up. If the card doesn't fully power up then the bios is not going to see the card and therefore the operating system will not see the card.
The 650 TI card is 110+ watts and the without the PCI-E 6 pin power connector there is not going to be sufficient power from the PCI-E slot to power up the card. See the below image for the location to attached the PCI-E 6 pin power connector.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Manually installing driver for Oxford Instruments IPS power supply

Similar Messages

Maybe you are looking for