Manually locking MRO - locked by agent

Hi,
We have a requirement wherein we need to manually lock the meter read order as implausible (they are actually plausible). I do know that there exists a status '03' - locked by agent , can anyone let me know how this can be done in the system (programatically or via transaction)
Thanks
Amin

Hi Amin,
When in T-Code 'EL29' for correcting plausible meter readings (your read is plausible in your case), click on the 'RESET' button which will update the Meter Reading Status to '03' (Locked by Agent).

Similar Messages

After my software update, my iPod screen won't automatically turn off without manually locking... help!

my iPod screen won't automatically turn off without manually locking... help!
Does anyone know how to change the settings so it will turn off/dim/lock automatically without needing to press the white button at the top all day? I'm draining batter and it's so annoying!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to manually lock iPhone

Is there a way to manually lock iphone4 rather than wait for auto lock?

Hi,
If you have a passcode lock on and it is set to 'take effect immediately' press the sleep/wake button which will lock the phone and turn the screen off.
Hope this helps!

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

Lock NAC Agent in Task Bar

I would like to lock the NAC Agent in the task bar so that users can't exit out of the agent. Anyone have any ideas or ways to do this in the registry. Users do not have admin rights to the computer and can still exit out of agent.

i found a possible solution:
http://www.liutilities.com/products/registrybooster/tweaklibrary/tweaks/10146/
But then again, what is the advantage for the user to disable the agent. If they disable it, they won't be able to access the network.
So it would be in their best interest to leave it enabled

How to get the 'Locked By' agent of a workitem - Urgent !!!

Hi,
I have a requirement where I need to identify the agent who 'LOCKED' a specific workitem. Let me explain the scenario..
I have a task which is delivered to multiple agents and any one of them can execute the witem first and there by locking that particular workitem. The workitem is given the status 'InProcess' and should disappear from the inbox of other agents. I have a deadline monitoring 'Latest End' on this particular task with a modeled deadline. This modeled deadline should use a SendMail step to send an e-mail only to that particular agent who has put this workitem in 'Inprocess' status. How can we do this..i.e identify this agent who locked this workitem. I have seen that the cont. elem WIActual_agent is filled with only when the task is completed(in our case its still INPROCESS and missed its deadline).
I looked into the table SWWWIHEAD(Witem header table) but it doesn't have a field that can give 'Locked by' ...
Pl..let me know how to do this asap...
Thanks in advance...
venu

Hi Kjetil,
How quick you are, and your memory serves you well. You search by workitem id where NO_SEL is not equal to 'X'.
Congrats
Gareth

Manually lock deleted message in SM21

Hi all,
I am getting a message in SM21 belongs to a certain user only.The message showing that manually deletion of lock from that userid.
But I checked that the user does not have authorization to run SM12.
How can I avoid this error.
Regards,
nani Prakash

hi,
Check if that User is having SE38/SA38 Authorizations, may be he is running the Program directly.
With regards,
Samarpan

How to manually lock and unlock your phone

I just got the samsung galaxy stratosphere two. I am having the problem where when I put it in my pocket it isn't locked at it is hitting buttons on its own. I have gone through all the settings and can't seem to figure out a quick and easy way to lock the screen before i put it in my pocket so that this doesn't happen, and then unlock it when i'm ready to use it again.

@Kaplan20121
Congratulations on the new phone! The following weeks after activating a new device are always exciting. To learn about the new features and tools that your new phone possesses is a great time.
To set a lock on your phone is crucial no only to ensure that your phone doesn't begin to press random buttons but for security. To set a lock for your phone please follow these instructions: Settings > Security> Screen Lock. There are various options for locking your screen. If you would like a simple lock screen option, swipe is great. I'm sure you will find this beneficial for future use.
YosefT_VZW
VZW Support
Follow us on Twitter @VZWSupport

My autolock is not working since i update my iphone 4 and ipad to ios6. Even my new iphone 5 autolock is not working. If forgot to manually lock my ipad get hot and drained battery

How to fix autolock screen thats not working?

I have already tried this but still the same. I have also tried un-pairing my speakers and re-pairing! Still get broken playback at times. This even happens when I am close to the bluetooth receiver.

Bypass manual email status update in Agent Inbox

hello,
I have a service class that automatically and successfully creates a Service Request from Email although it does not update email status in Agent Inbox.
my situation is very similar to this one.
[CRM ERMS workbench & Agent inbox status difference;
although the answer provided does not really solve the problem.
My knowledge in ABAP does not really extend to workflow so please do correct me if i'm saying things wrong.
So here's the scenario:
Task A that processes the ERMS rule completes task (service class)
Task B waits for the user's decision before execution so we have to manually update email status to 'Completed' in Agent Inbox.
Our approach is to search for a way to bypass this decision part so the workflow can continue.
Has anyone encountered this before? Can you give me suggestions? Thanks.
Sunntann
Edited by: sunntann on Aug 16, 2011 10:12 AM

Hi,
Please post it in ABAP Development Forum. then you will get prominent responses.
Regards,
Suman

Manual removal of Multihoming on Agent

Our Agents are multihomed to SCOM 2007 and 2012. When the time comes to remove them from 2007, can I just delete from console in 2007 , or do I need to actually remove the Management group from each agent? Is this same for Windows and Unix/Linux
agents?

Deleting an agent just removes that from SCOM console resulting in errors and state entries in SCOM DB.
Its always good to uninstall agent.
If you need to remove SCOM 2007 Agent. you can do the following -
1) use the script from
http://gallery.technet.microsoft.com/Remove-a-Management-group-336c849a.
2) or else use this
http://gallery.technet.microsoft.com/Remove-Management-Groups-70347288
3) or else log in to the server, go to control panel, double click on operations manager agent applet and remove the groups. Recycling health service once will take care of removing the registries, etc.
Hope this helps.
Thanks, S K Agrawal

I have 2nd gen Ipad which I recently updated to ios 6.1.2 and my auto cover lock does not work, so is the lock button, i cannot lock my ipad manually!!

I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
It got really annoying when I tried to use the lock button and it wont lock the sceen!! To test whether the button was allright, I did a long press and the message came if I wanted to shut down the ipad. So the button works fine, but I cannot use it to manually lock the ipad. Now the only way to lock the ipad is to wait for 2 mins (autolock) and still I cannot wake up the Ipad using the lock button. To do that I have to use the Home Screen button
Does any one else have similar issues and any solutions pls!! Cheers

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

We need to check whether the order is locked or not?

I need to check whether the order is locked or not?
I tried to use this RFC KAUF_ORDER_READ and passed Order no.
I manually locked the order( using Tcode -IW32) but still Function module is not returning 'X' in FIELDS flg_locked and FLG_ENQUE of the structure E_KAUF.
the FM should return 'X' in these fields.
Please help.
Coudl anybody suggest me how I can check using RFC/ Table fields etc that whether the order is locked or not?

Hi Rohit,
Try this code. Check the flag.
Note : Order number should have left padding of Zero
DATA : order_tab TYPE TABLE OF ord_pre,
       wa        TYPE ord_pre,
       flag      TYPE rc27x-flg_sel.
wa-aufnr = '000004006789'. "Order number should have left padding of Zero
APPEND wa TO order_tab.
CALL FUNCTION 'CO_ZF_ORDER_READ'
EXPORTING
   flg_dialog               = ' '
*   FLG_ENQUEUE              = 'X'
*   OBJECTS_IMP              = ' '
*   EXPLODE_IMP              = ' '
*   FLG_PROT_IMP             = ' '
*   FLG_NO_EXTERNAL          = ' '
*   FLG_NO_BANF              =
*   FLG_CHECK_SIM            =
*   IMPORT_MESSAGE_ID        =
*   CHECK_STATUS_READ        = ' '
*   FLG_NO_GOS               = ' '
*   FLG_CALLED_TO_COPY       = ' '
IMPORTING
   flg_enqueue_ok           = flag
*   FLG_ESCAPE               =
TABLES
*   AUFNR_DEL_EXP            =
    aufnr_tab_imp            = order_tab
EXCEPTIONS
   ORDER_NOT_FOUND          = 1
   RELEASE_NO_CHANGE        = 2
   OTHERS                   = 3
IF sy-subrc = 0.
WRITE flag. "If Flag is X order is not locked
ENDIF.
Regards
Rajvansh
Edited by: Rajvansh Ravi on Nov 27, 2008 12:33 PM

I am using iPhone 5s 32gb . Since yesterday auto lock feature is not working ( I have set it to 1 minute ) and occasionally a blue band has startedappearing horizontally on the screen and moves across the screen

Someone please tell the solution .
Is it a hardware issue or os

I have the same problem, only my lines are red. I just bought a 52 16GB to replace my iPhone 4. The old phone started having the red lines moving back and forth, and I looked on some of the forums, and was led to believe that it meant the phone was dying. Since I've had it for a long time, and it was real slow, I thought getting a new phone would be the solution. But wouldn't you know it, after a week or so, the red lines started showing up on the 5s. And now the auto-lock doesn't, and I keep running the battery down because I forget to manually lock it. The red lines make me think there's a virus, since it migrated to the new phone. As to the auto-lock, I have no idea.
Any help would be really appreciated. I had to select a reply option, so I replied to the original post, but I'm hoping someone out there has a solution.
Thanks!

Auto-lock is not working after last update

After installing the newest IOS update the auto-lock features quit working. It was set to auto-lock after 5 minuets of inactivity, I have reset that to 2 minuets and it still does not auto-lock. If I forget to manually lock it after using it my battery runs down.
About the same time that I did the IOS update I installed the Printer Pro app from the App Store. I have deleted this app from my IPAD but auto-lock still does not work.

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Manually locking MRO - locked by agent

Similar Messages

Maybe you are looking for