Manually managing E3000 / not using cisco connect software

ok now i have totally by pass the cisco connect software, and manually managing my e3000 / updating the firmware manually and i have the ssid disabled due to people trying to connect to our router all the time and our router is password protected (wpa/aes) i need to know if manually managing the network is a good idea or not i've manage other linksys routers in the network page, i am finally able to connect and i get my full download speed 10MB/Second now before i was getting 5MB/second and upload speed is at a good 1MB/second before i was getting 0.3MB/second are these good speeds or what i dont know i've also ran a few test - both the hdtv & xbox on at the same time running the same item (netflix's ) both at the same speed

For better wireless connection, use WPA2 with AES security.
I think disabling the SSID broadcast will make any difference.
You can also try changing the advanced wireless settings on the router.
Connect the computer to the router with the Ethernet cable. Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings sub tab. Change the Beacon interval to 75, RTS and Fragmentation threshold to 2304. Save the settings.
Click on Setup tab and change the MTU size to 1365.Save the settings and power cycle the router.
Now observer the wireless connection and see if that makes any difference.
Also make sure that your router is running on latest firmware.

Similar Messages

Cisco Connect software issue

I am having problems trying to load the Cisco Connect application software from the CD. I am able to connect to router, but the Cisco Connect software never loads to the hard drive. Any suggestions?

I think the Cisco connect software is running successfully but it is not giving you the option to lauch the Cisco connect utility. If you get the ' congratulations ' page that means it is running successfully.
When you install the Cisco connect on your computer, it generally creates option on your computer to launch the utility.
On windows computer you will find Cisco connect under All programs. Click on Start and go to All Programs and see if you can find Cisco connect.
On MAC computer you will find Cisco connect under Applications. On your desktop, locate and double-click on the Macintosh HD icon. A window will then appear on your screen. Select Applications from the left panel on this window. This will display all contents under the Applications category.From the list of Applications, locate and double-click on the Cisco Connect icon. This will launch Cisco Connect and take you to its main screen.
If you are still not finding Cisco connect software on your computer then I will suggest you install Cisco connect after installing settings up your router manually.
Uninstall Cisco connect from your computer if there is any. Follow this link to install Cisco connect after installing the router manually.

Can I use Cisco Connect if I change the default router IP address?

I am adding my E3000 into an existing network behind a SonicWall firewall. I am using an address scheme of 192.168.168.xxx When I change the router address to 192.168.168.10 and disable DHCP in Cisco Connect, I am left with only being able to access the router through the web interface. This seems pretty lame; I've read other threads on Web vs. Cisco Connect. Is there a quick fix that will allow Cisco Connect to still find the router after I've made (just) these two changes?
--David C

Yes you still will be able to use the Cisco Connect software if you have changed the Routers IP address, But if you change the Router password of Wireless Security then you wont be able to use Cisco Connect software.

E3000 FTP access question/using Cisco connect after router setup

I have two questions about my E3000 router.
1. If I have already set up my router using the default web address, if I use the Cisco connect software, do I gain any benefit or am I opening up a can of worms? I would like to change my server name and default admin user name stuff, but I don't want to screw with any settings I have. I will be updating my firmware in a day or so, so should I use the software then, or just go about it the way I have already?
2. I have enables FTP access for my USB drive, but I am unsure how to access it from a remote computer. I know using ftp://xxx.xxx.x.x gets me to my Index while connected to my network, but how do I access this off my network? I want to give our parents and family access to pictures, but I''m not sure of the exact address to use. I have looked in the set-up manual, and searched Google and this site, and have found nothing.
Thank you in advance for your help!
Dan

If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

Not allowed to use Cisco Connect anymore. Help?

I recently changed my wireless password, in the advanced settings, to not match my router password. Now that I try to use Cisco Connect, it says that I can not because I changed the a password in the advanced settings. Is there anything i can do to undo this change?

If you change the password of the router or wireless network using the setup page of the router then Cisco connect software will stop working. You can change the router password to match with Wireless network password.
Open the setup page of the router. Go to Administration tab and change the router password.
See if that makes Cisco connect to work. If not then I think you will need to reset the router and reconfigure it.

Cisco connect software wants to match the admin password to cisco connect password?

As much as possible i want only one SSID for my router, so i dont want to have another SSID for guest. To protect my router
settings I need to have a different admin password from those of passphrase (i.e. wifi password).
Why is it that cisco connect software wants to match the admin password to cisco connect password?
The cisco connect password is the same as the passphrase. I think its unsafe to have similar passes for both admin password
and passphrase.
Is there any way that cisco connect software would work under different admin password & passphrase?

From what I can tell, the router is set up so that it broadcasts two seperate SSID's with two unique passwords. If you logon to the SSID-Guest network, you are not allowed any kind of Admin access to the router. If you attempt to use the Cisco Connect software, you'll eventually get an error saying that it could not find a network (unless there is an unconfigured router running factory defaults in range). I verified this using a Cisco Linksys E4200 and a few laptops.
So long as you utilize the guest network properly, you should be able to maintain security on your network and use Cisco Connect. Obviously this isn't ideal for most commercial use, but then again I don't know why you would want to use this software on that scale.
If you are trying to keep one SSID for the network, I think you're going to have to use the web based service and do a little manual configuration.
TLDR: Seta different password for the guest network and never give out the primary network password. Guests don't have admin access, even while using Cisco Connect so long as they are connected to the -Guest SSID.

Cisco Connect Software

Since upgrading to Mountain Lion, I can no longer use my Cisco Connect Software to manage my wireless network. I get the following Error Message:
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
Any help would be appreciated.
Message was edited by: vatkins1906

As you might know by now, Cisco Connect might not have an upgrade since Cisco basically came out with a new application named "Cisco Connect in the Cloud". This one need a firmware upgrade on your router first to Ver.1.1.38.138880 wich you will find at http://homesupport.cisco.com/en-us/support/ccc.
Connect in the cloud is not bad, not great either but do as much as the regular Connect and some but this time from anywere you have internet access. The Con is that you will never be able again to use the typical settings using the IP address of your router. Yap you read righ, never again unless you decide to roll back the firmware to the previous version. Cisco have instructions have to do it. Other Cons at least for me is that the download speed came from almost 12 mbps to 2 mbps. At least that what the speed test show, but i have not seen the reduce speed in real. My web access still good and super fast. If i connect directly to the modem shows almost 12, connect to the router 2mbps. Wierd.
Any way good luck

Remove guest access without using 'cisco connect'

Hi all,
I just installed a new Linksys E3000 and was able to use "Cisco Connect" up until I decided to forgo the "Wi-Fi Protected Setup" and use manual settings.
Well, after having done this, I can no longer use Cisco connect, and I really want to get rid of the additional "-guest" network which seems to be tagged onto my main network. Is there anywhere via the browser-based admin that I can get rid of the guest access feature? If there is, I can't seem to find it.
I tried switching back to the "Wi-Fi Protected Setup" feature so I could go back to using connect, however it no longer seems to see my router when I try to connect to it, so this is no longer an option for me. I'd really like to avoid reinstalling the router all over again.
thanks for any info.

If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

E3000 Cascade - disables Cisco Connect

I have a 2621XM router that I use for my gateway and firewall and wish to keep this as my main security device. I liked the parental control and USB storage features of the new E3000 and purchased this to replace my WRTG54.
My problem is that when attached to the same LAN segment (LAN to LAN cascade) I loose the ability to use Cisco Connect and thus loose the ability to manage guest access, parental controls and such.
I've read that disabling DHCP server on the E3000 disables Cisco Connect. Is this true? I have internal DHCP and DNS servers and do not wish to separate the scopes and manage them from two devices with yet another IP scope.
In my opinion...the lack of the ability to manage these advanced features from the WEB interface is a serious flaw. Loosing the walled garden type features just because you choose not to use the E3000 router or DHCP function is just not acceptable. I hope this is being addressed by Cisco/Linksys.

If you connect the E3000 with a LAN port to your main router then you operate it like a simple access point and ethernet switch. All internet related functions won't work then. Parental control, access restrictions or other things like DDNS, port forwarding etc. won't work because those functions operate only when traffic is routed through the router. If you don't use the internet port traffic is not routed through the E3000. This is always the case.
Regarding the guest access you can only hope that they'll add it to the web interface very soon. I suggest calling Linksys support and telling them. Maybe if a lot of users call them and ask for this they'll add it sooner.

E3000 Router without Cisco Connect

I just setup my new E3000 which in general is working great. Being a Cisco geek at work, my first step was to connect via http and toss the Cisco Connect CD to the side. After getting the basics setup to mimic my old Cisco 871W, I started to look into some of the whiz bang features on teh E3000.
The first one that I wanted to take advantage of was having a different SSID for the 5GHz band from the 2.4GHz band. In the web interface this seemed simple to do, but although the SSID was showing up on my laptop I was unable to connect to it. As soon as I made the SSIDs the same, my laptop connected to the 5GHz side or 2.4GHz just fine. Is there some magic to getting this setup?
The other feature I wanted to setup was the Guest access. Unfortunately it looks like this feature is hidden unless you use Cisco Connect and if you don't use 192.168.1.1 for your router Cisco Connect can't see it. Am I missing something somewhere?
Thanks,
Ben Story
CCNA, CCNA Wireless, CCDA, CCSP
Ben Story
CCNA, CCNA Wireless, CCDA, CCSP

I initially had a different SSID for the 5GHz band and was able to connect my Wireless-N bridge to it without any problems. However, hours later, both the 2.4 and 5 GHz bands flaked out, and now I can't get anything to connect to them. The wired portion of my router works fine. I'll be doing a firmware reinstall and 30/30/30 hard reset tomorrow. I assume it might be an issue with the firmware being 1.0. if it's not, it's being returned for another unit.
As for guest access, yes, you can only adjust it through Cisco Connect. There is no web UI option for it. If you change the password of your router, its default IP, and possibly its name, Cisco Connect will not work.
Cisco really screwed up this release. Hopefully the next firmware release will fix all of this.

Using Cisco Connect with several E1000 routeres

I have two E1000 routeres, one at home and one at the office, and I have installed the Cisco Connect (CC) software on my laptop, and used it to congifure both devices with.
The first time I tried to connect CC to the router at the office, it removed the settings from my home router, and accessed the E1000 ok and I could configure it without any problems via CC.
But when I now tries to use CC to configure my home router via CC, it keeps complaining about me not beeing connected to the right router, and CC won't allow me to connect to my home router eventhough I type in the correct password etc.
Does anybody know of a trick to use the same CC for configuring multiple E1000's ? Or how to get CC to "forget" its settings and connect to a new E1000 router?
Thanks.

So the concern that you said is the configuration of the Router ( E1000 ) at home.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD so for that you need to uninstall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...
Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...

Cisco Connect Software Download

I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken now. Is there anywhere I can download it?
Thanks
Darlene

If you want to see your router's settings, you don't have to use Cisco Connect. You can use the web GUI for browsing settings using your web browser by logging in at http://192.168.1.1. Then you'll see the administrative "dashboard", and by following the tabs to the settings that you want to look at, you can see everything. I'd also recommend downloading the user guide for your router from Linksys Support, if you haven't already. This explains all the settings in the administrative GUI and will make it much easier to find what you're looking for. By the way, your English is perfectly understandable *smile*.

Problem with EM (Enterprise Manager is not able to connect to the database)

Hi all,
I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
It says:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
Status     Open                         Details     The instance is open.
Host          shiman
Port          *1521*
SID          orcl
Oracle Home     d:\Oracle\product\11.1.0\db_1
Agent Connection to Instance (Green arrow)
Status Succeeded
Details
Listener (Green arrow)
Status     Up
Host          shiman
Port          *1521*
Name          LISTENER
Oracle Home     d:\Oracle\product\11.1.0\db_1
Location     d:\Oracle\product\11.1.0\db_1\network\admin
Details
please see the attached file:
http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://shiman:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
Thanks.
Iman

emdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
     at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
     at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,

You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

Enterprise manager is not able to connect to database instance

Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?

user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17

Manually managing E3000 / not using cisco connect software

Similar Messages

Maybe you are looking for