Manually override auto off

in my old BB i was able to override auto off by using the on button on top. but with my Curve, when i set auto offf for 11 pm i am unable to manually turn the phone on until the auto on time is reached. anyone know how to fix this?

Hello
Welcome to the Community
May we know your device OS version and if you recently upgraded your device OS?
Thanks,
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

My backlight will not turn off automatically. I have to manually turn it off and forget to sometimes and that drains my battery. Does anyone know how to make it turn of automatically after a few seconds?

My backlight will not turn off automatically. I have to manually turn it off and forget to sometimes and that drains my battery. Does anyone know how to make it turn of automatically after a few seconds?

Use the Settings app.
Settings > General > Auto Lock
Is Auto Lock set to Never? Change it to less time.

HP1102w Pro: Wireless/Auto-sleep, auto-off

Hello.
I just bought the HP1102w Pro and I'm using it on MacOS X.9 (Mavericks). I install it using the USB cable and then configured to wireless and now is working wirelessly. Everything great. But I have a couple of doubts:
1. Is there any way to access the printer configuration through wireless? When I went to the printer options in System Preferences/Printers it worked great by opening a different app where I could manage my preferences and print test pages, etc... But when I try the same with the printer in wireless mode, the same app opens but nothing happens, it's a bug or somehting. Is this normal? Since it is wireless, can I access the printer configuration using my browser?
2. I set the sleep mode to "after 1 minute" and disabled the auto-off while USB connected. Does that configuration stays now that I've changed to wireless mode?
Thank you.
Best regards,
Telmo Mendes Leal
P.s.: The Apple Software Update didn't download anything to make the installation possible (like it says on the printer manual). I had to search the Apple support (http://support.apple.com/kb/dl907) and download it manually.

Hello @telmomendesleal,
Welcome to the HP Forums!
I understand you're receiving some issues with your Laserjet P1102W. I will do my best to assist you! For question one, are you referring to changing print settings? Please look at this HP document on Changing Print Settings in Mac OS X. Let me know if this is what you're referring to and you don't have certain options after switching to wireless.
I would make sure your Apple updates are completed on your computer by following this document here. Try repairing the disk permissions on your computer following this Apple document here.
Also, try resetting the printing system on your computer by following this Apple document here. When re-adding the printer, make sure it's not on the AirPrint driver, but the Laserjet P1102W driver.
For the second question, the sleep mode should be still configured even though you switched to wireless. Just make sure the auto-off is still disabled by following this HP document on Auto-Off Delay Time is Too Short. I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded. Can't find place to check manual vs. auto sync.

I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

HP LaserJet M175nw - is "Auto-Off" *actually* compatible with wifi?

So my new printer was advertised as promised that I could "Achieve up to 50% energy savings, using an HP LaserJet with HP Auto-Off Technology which automatically senses your printing activity, turning your printer off when you don’t need it."
This sounds ideal - I print maybe once every 2-3 days at most. The printer could be in sleep mode for most of the time and surely save me loads of energy. Sadly, after a few days my printer stops accepting print jobs. It's still "on" (green power light) and the control panel on the unit can be accessed, however once going into this sleep mode wifi access is lost and nothing I can do will re-instate the wireless connection (i.e. it should show a steady blue light on the front and the IP address in the LCD screen). All I can do is turn the printer off and back on again then everything works as before.
I have:
Set a static IP address on the printer (and reserved this allocation via the router)
Updated to the latest firmware
Confirmed that wireless signal strength is healthy (not too weak, not too near the router)
Now upon reading a few troubleshooting tips (including here on the HP support site stickies) I read the suggestion of "Check that the printer’s “Auto-off” feature is disabled. If this feature is enabled, the printer will power OFF after some period of non-use."
This suggestion seems to indicate that infrequent wireless access and power-saving are mutually exclusive - is this true? Even if the print does indeed "power OFF after some period of non-use", surely waking it from this state (as distinct from completely rebooting the printer) should be sufficient to wake the printer?!
Can anyone confirm just how "supported"/compatible the power-saving and wifi features are on this model? What I'm asking it to do doesn't seem unreasonable - I'd expected some sort of "wake on LAN"-style behaviour...

Hi,
Please follow these given steps
press the tool icon on the display > System setup>Energy settings>Wake/Auto On Events>LAN Job> ON
or
press the tool icon on the display > System setup>Energy settings>Auto Power Down>Wake Event>LAN Job(put a check or select this)
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Need to manually override vbup-lfsta for fully invoiced order

We have two sales orders in production that have been fully invoiced, but due to an old bug in our shipping point determination logic, the shipping point was accidentally cleared in the sales order, thereby showing it as incomplete (which is correct). Because these documents have fully delivered and invoiced, we cannot update the shipping point but need a way to manually change VBUP-LFSTA from A to C (something similar to VL_complete, but for a sales order). I am basically looking for the OPPOSITE of program SDVBUK00, which corrects incorrect VBUP and VBUK settings. I need to manually override the settings since these are very old documents, cannot be reversed, rejected or changed and are not needed to show on the incomplete orders report because they were shipped and billed.
Thank you in advance for your time!
Regina
Edited by: Regina DeMita on May 13, 2010 4:59 PM

Hello Regina
I have the following suggestions for you.
1) The only way these docs may be bothering you is by showing up on the incomplete orders report. If you eliminate them in that report, then you should be fine I guess. So my workaround is use Tcode V_ UC and create a variant excluding these 2 documents from the list (using the Sales Document field in the General doc data section and the option to exclude single values) and make this variant the default for all users.
2) Use Z-code to change the status. See OSS notes 1177165 and 617501, the second one particularly because it has Document # in the selection criteria. They are meant to correct the Revenue Recognition status of sales documents and may be you can copy and adapt one of them to suit your situation. Or best ask SAP to provide one as they have done program from note 1177165 based on customer request.
Hope this helps.

Manual override option for Unit selling price in Order line level.

In OM R-12
Our client wants manual override option for Unit selling price in Order line level.
But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
This is current standard functionality.
Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
regards,

Hi Kashif,
I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
OM: List Price Override Privilege = "Unlimited Access" at user level
OM: Discounting Privileges = "None" at user level
No manual modifiers defined and Order status = "Entered"
I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
Document References:
Oracle® Order Management User's Guide
Release 12, Part No. B28099-03, September 2007 >> R12.0.4
Page No. 10-74
+Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
Page No. 10-94
User Procedures
_A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
- View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
- Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
To use Override List Price:
+1. Navigate to the Sales Orders/Quick Sales Orders window.+
+2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
+3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
+4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
+5. If the folder has been modified to show the Original List Price, the original list price displays+.
+6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
In the OM Implementation Manual also there are notes related to this.
OM Implementation Manual
Release 12, Part No. B25975-03, September 2007 >> R12.0.4
You can refer to page no. 2-59, C-4 etc.
Thanks
Supro

Canon 6D display language resets to chinese after auto off and indicates card full

Just assembled my new 6D with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
Any suggestions ?

It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings. The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
Investigate this, but very, very carefully.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Enterprise Mode site list and manual override

I have a small question / issue when using Enterprise Mode.
We have enabled it using GPO by specifying both a site list and the Enable settings for manual override. This works fine but I don't know how to reset the manual override if somebody flicks the EM mode for a specific site.
I just want to tell IE to forget all manual overrides and apply the sitelist as delivered.
I tried to look in the registry, in the %AppData% fodler, even cleared the IE cache but IE still remembers the user overrides.
Any help will be really appreciated.
Thanks, Nic.

Hi Nic,
As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
triage and testing costs.
Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
This is designed by default, and we cannot reset the by preventing the changes.
We may try to logon script to re-deploy the original site list to reset the site list settings.
Kate Li
TechNet Community Support

My mac mini will not shut down. I need to manually shut it off with the power button.

My mac mini will not shut down or restart. I need to manually shut it off with the power button.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

Print jobs stuck in queue after printer goes auto off

Hi all!We have an HP LaserJet M125NW printer in the office, which is connected directly to the network (wired). The problem is, once the printer goes to "auto off" mode, the print jobs get stuck in the queue, and we need to restart the printer every time. After the restart, it works fine, until it goes auto off again. The device has a fix ip, and it can be seen on the network, everything sems okay, but it still doesn't print. I tried different computers, different operating systems, nothing works. Could anyone help me with this annoying situation?

, Welcome to the forums I read about the printing issue you're having with your LaserJet M125NW, that will not seem to wake up when you send the print job to be printed out. Below is what I would first suggest trying. Select Setup, System Setup, Energy Settings, Wake/Auto On Events, and in that menu, select "LAN Job" to see if this will help wake the printer up when you send it a print command. Also ensure you have the power to the unit plugged in directly to a wall outlet. Avoid power bars and surge protectors, which ensures the printer is receiving the full power it needs. Let me know what happens, good luck

Override Auto Cache Management

Not really a problem, as such.. but something that is a little annoying.
The Override Auto Cache Management option doesn't seem to work properly, unless what is happening SHOULD be happening?
Basically, by default it is set to 75Mb.. I'll set it to around 350-400Mb. However, at random intervals, Firefox will default the settings back to 75Mb, out of the blue. No warning or anything.
Why does is keep defaulting back to 75Mb? I have also changed the option using About:Config with the 'browser.cache.disk.capacity' option. but it still defaults back to 75Mb.
Is there anything I could be doing wrong? Another setting that needs to be changed? Any help will be appreciated. Thanks.

The cache size usually ends up around 350 MB, unless you have very little free disk space. I suggest you start over:
# Type ''about:config'' into the address bar and press Enter.
# Press the big button to bypass the warning.
# In the search box, type ''browser.cache.''
# In the search results, right-click each entry with the status "user set" and choose '''Reset'''.
# Type ''about:cache'' into the address bar and press Enter. Under the "Disk cache device" category, note the value of the '''Cache Directory'''. Open that folder in Windows Explorer.
# Exit Firefox (click the Firefox button in the top left corner, then choose Exit).
# Delete the cache folder you opened earlier.
# Restart Firefox.
At that point, your cache size should be set to something more sensible. Note that under [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption|Options - Advanced - Network]], the number box shows the maximum cache size, while the text above it shows how much is currently stored.<br>
If you still need to override the automatic size, then normally all you need to do is check "Override automatic cache management", specify a custom size below, then click the OK button.<br>
Doing so would save the first preference as ''browser.cache.disk.smart_size.enabled'' with a value of '''false''', and the second as ''browser.cache.disk.capacity'' with a value in [http://en.wikipedia.org/wiki/Kibibyte kibibytes]. To avoid unintended effects, it's best to avoid modifying about:config preferences (at least in this case).
If your preferences are lost after restarting Firefox, see the following article:
* [[How to fix preferences that won't save]]

Nokia N900 auto off after 15 minutes

Nokia N900 auto off after 15 minutes. I am also reflash my mobile but problem is not solve please help me

More information..
Does it happen when it is plugged into a charger?
What is the battery level?
Are you using the battery that came with the phone?
Are you using a different battery?
Have you "over clocked"?
Does it power off when you are actively using the phone?
Does it power off only when the phone is idle and untouched?
What happens if you run this command in the terminal application?
cat /proc/bootreason

Manually override auto off

Similar Messages

Maybe you are looking for