Manually process GR slip print WE01

Hi
I have manually added an output type WE01 in MB02.
I can see the same in NAST table
Please suggest me which T-code/table to use for processing the message. I tried MB90. But it couldnot find any record to process
regards
Shetty

Hi there
Check the below settings whether you have done it clear,,
NACE-Select ME Click on Condition records- Select WE01( As you want)-Trans/Event Type-"WE" Print Version " 2"(you can select as u want) and Execute it
In the next scren P-6, medium-1, Date/Time-Select 3 as you want), Language EN and enter,, Now select the line and click on the communication and there enter the output device if anything specified for you,, and save it,,
Now check in MB02, enter the material document, and double click on the any line item, Click on the messages do the same process for this document as above and save it and try MB90,, surely it wil work and for the future docs,,
Thanks
Senthil

Similar Messages

How to setup the movement slip printing

Hi
Does anyone know how to setup the movement or migo slip printing? Does it need setup condition to auto trigger the output type or omj4 could setup the auto slip printing by output type +plant locaiton ?
I have setup NDR in my parameter as X, but when I test to move matieral or receipt, there is no slip be printed ..why?
Thanks
Sherry

Hi Alice,
Go to NACE Transaction in that select ME - Inventory managment and also maintain condition record, Procedure, output type, Acess sequence for output type (WE01) and u get automatically in GR..Moreover also select the printer determination by Plant/Storage location combination.....
Apart from Maintaining condition record as suggested in previous thread one more important activity is
In Migo screen on Header data section inside generaltab
just below Posting date feild you will find Printer Icon right hand side to that there is one check box, this must be checked either manually at the time of GR/GI creation or is preselected if the parameter NDR has been set to X (capital letter!) in your user master recordset. This is preselected if the parameter NDR has been set to X (capital letter!) in your user master record...
Moreover use MB90 for print outs for goods movement...
From sas...

R42520 Pick Slip Print

I am having difficultly using the XML output from the P42520 Pick Slip Print UBE to generate a BIP form. The XML output doesn't have multiple indentations for internal for each processing. Has any one used the raw XML without modifying it for multiple levels?

The only way I could get this to work was to modify the R42520 to add the pick slip to the header.
I played around with it for a while, but gave up. I'd just go for modifying the R42520.....
But if anyone has successfuly done it without modify the R42520 I'd like to hear how they did it!
Jackie

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

Foreign trade data defaulting to manually processed invoices.

Hello Experts,
How to default foreign trade data to manually processing invoices?
Presently it is being manuallay processed and we need to default this data automatially on Invoice.
Regards,
Preeti

We have maintained all the necessary setups for the foreign trade data.
however, while creating the billing document for export, it is not auto - defaulting the foreign trade data. can this be autopopulated?
The source and destination mode of transport.

Manual Process VS System Process or Interaction

Hi everyone,
I'm a business consultant and I'm still on my first steps in Oracel BPA.
My question is about the representation of the activities in a Business Process...In Visio you can have different symbols to represent Manual Processes and Processes that use Systems.
In Oracle BPA you have Human Tasks and Automated Activity...so, if I want to represent a Manual Process, should I choose the Human Task symbol? Or only if there's a workflow pattern associated to that activity? Because you can be only Counting Cash in a Vault...would that be a Human Task in Oracle BPA?
Thank you in advance for your help.
Pedro

Awesome stuff sudhir..It is really a great logic to use..Thanks for ur help..
This is for future generation...
One Note:The field symbol should be declared as type any instead of "standard table".Because the T181 is used as global workarea(strucuture) in SAPMV45A program rather than internal table.
Here you go the modified code.
FIELD-SYMBOLS:<fs_t180> TYPE any .
DATA:wa_t180 TYPE t180,
c_t180(15) TYPE c VALUE '(SAPMV45A)T180'.
ASSIGN (c_t180) to <fs_t180>.
wa_t180 = <fs_t180>.
If wa_t180-tcode = 'VA01' or wa_t180-tcode = 'VA02'.
Endif.
Thanks,
Vigneswaran S

Seperate manual processing PR according to Plant

Dear All,
I have an issue in my current implementation.Here is the issue
in SPRO we can define Purchase Requisition number by MRP in two way
1. Pur Req number by planning MRP automatic OMI2
here we can seperate number range for PR based on plant
2. Pur Req number by manual (convert planned order to PR manually) OMI3
here we can not seperate the number range based on plant
Is there a way to seperate the number range for purchase requisition that manually process?
Kindly help and thank you very much.
Best rqgards,
Freddy

Dear,
Well the problem is when number ranges for manually processing is always used NB.
When we begin studying this note the symptom is quite the same :
Symptom is this OSS note:
When you convert a planned order into a purchase requisition (transactions
MD14, MD15), you can only define the purchase requisition generation using
document type "NB".
However, as of Release 4.0 you can define several document types, but when
you manuually convert planned order into purchase requisitions the number
range is always determined using document type 'NB'.
We are still testing this note:
1. Modify data domain PAART
2. Assign them in OMI3
will be report back for the result
Best regards,
Freddy

No amount if check on "Manual Processing Only" in KKA1

Hi Expert,
I am running Results Analysis for Internal Order. If i run without check on "Manual Processing Only", WIP Act.Cost will come out with amount in column WIPR COP.
If i run with check on "Manual Processing Only", there was zero amount in WIP cumulative balances column.
Results Analysis Category    Line ID
WIPR                                      COL
WIPR                                      COP
WIPR                                      COS
RUCR                                     COL
RUCR                                     COP
RUCR                                     COS
Please advice is there any configuration is missing or need enhancement?
Thanks.
regards,
ng chong chuan

Hi Expert,
I able to solve this issue, i need to tick save when execute Results Analysis Key for the internal order.
Thanks.

Error when trying to view reports or manually processing the TFS data warehouse and analysis services cube

Hello Guys,
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: https://msdn.microsoft.com/en-us/library/ff400237.aspx
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
Please advice as to how to resolve this issue and be able to see the reports.

I have managed to resolve this issue. Note that for all purposes of this question and answer, mydomain\tfsadmin is a generic user (used to install all software). This is a proof of concept account, for test purposes
The thing is that while installation of the SQL Analysis service I had given the username: mydomain\tfsadmin (a generic user for testing) as the Analysis service administrator, instead of the 'Domain admin' group.
Still I have managed to resolve this issue.
Steps:
1. Make sure that the user (mydomain\tfsadmin) is a member of Analysis Server -> TFS_Analysis db -> Roles -> TFSWarehouseAdministrator and TFSWarehouseDataReader. (This actually happens automatically when you run the TFS Admin console and configure
reporting and provide the username that will access the Analysis db, etc. In my case the user is 'mydomain\tfsadmin')
2. It is a bad practice to manually process the cube (you can do this is make sure that there are no errors, but only after completing the following steps till step 5)
3. Also make sure that NT AUTHORITY\NETWORK SERVICE is member of the Analysis db -> Roles -> TFSWarehouseAdministrator ->
this will resolve the error which appears in the 2nd screenshot in the question.
4. Then you can right click on the Analysis db and run process. If this is throwing error as shown in above reply of mine, then you need to follow https://msdn.microsoft.com/en-us/library/vstudio/ff400237.aspx
a. http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx
b. Choose
ProcessWarehouse, run it.
c. Choose ProcessAnalysisDatabase, type 'Full' and run it.
d. Choose GetProcessingStatus,
enter 'TRUE' in last field and run it.
e. I don't get any errors at this point.
5. Now you can connect to the Analysis server via SQL Mgmt Console, right click on Analysis db (TFS_Analysis) and click Process. It all works good.
6. Now you can browse to the report URL (to get this URL you can open Team explorer 2013, connect to you team project, on RHS click 'Reports', Click 'Go to Site'.
DONE.

Confirmation Slip Printing

Hi ,
How do I set-up the automatic printing of the confirmation slips?
Is setting this in the Control Key enough?

Hi,
Alongwith Appropriate control key you need to maintain following settings in Customization in OPK8 :
List : LV02
List Name : Confirmation Slip
In Print Programms :
For List LV02 : Report Name PSFCCONF
In Forms :
For List LV02 : SAPScript Form is ZPPGL_STD_LAYOUT
Pls. maintain / if exists just check and verify above settings in OPK8 to carry out Confirmation Slip Printing.
Hope this helps.
Revert if any doubt and reward if useful.
Regards,
Tejas

Confirmation Slip Print Out

Hi Experts,
Requirement is to have a print out at every confirmation (CO15 - For Order). How do you print a confirmation slip?
I did some research in the forum but they all seem too technical for me, im sorry. Can you please lead me right through it? I just need to be able to print a simple print out of the confirmation with the Goods Movement information.
Thanks in advance!

Dear
In OPK8
Name of the list - LK02, LV02
Spool parameters - User and plant = *
Reference operation - Type
All lists
Refer this thread,
Re: Production Order Print Out
In OPK8 you need to do the setting for confirmation print LV02 Confirmation slip , print program - PSFCCONF, LK02 then you need to active control key for printing in OP00 then assign the control key and printer to work center that is assign to last operation in routing or in production order operation screen.
Then you can take print in background through COHVOMPRINT, CO04N or OPKV.
Just check those above and try
Regards
JH

CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3. Why does it not work any more? Thanks!

Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!

Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT

Solar01 - manual process steps

Hello,
We have some manual process steps defined in solar01. As transaction codes are not available for them, what is normally done for manual processes under transaction tab in solar01
Are they left blank under transaction tab in solar01 or how manual process steps are taken care in solman - where ?
Thanks.
Anirudh,

It sounds like you created created a logical component called Z_Manual_Step for product type Z_Manual_Step and added this logical component to your project and assigned it to the manual steps in the business process structure.
They won't have an SAP transaction, however, they may involve a web site address, which can be added to the transactions tab.
They are really there to document the process better for anyone that looks at the system. You can load documentation, track status, assign responsibility, etc.. to the manual step.
regards,
Jason

Manual processing of data packets

Hi,
Iam trying to manually process data packets into the cube. But the process is running, Iam getting ABAP debugging screen. What does this mean?
Thanks & Regards
AP

HI
please check if there is any error message.
check if there are any jobs in sm37 in respect to this load.
if there are none.
make the request red and try reloading again
normally you will load the data only till psa or if you edit and records is when you will do the manual update and at the same time you should make sure that you delete the request from the info cube
hope this helps

Pack slip printing more than one delivery

I have registered a tar, but have not received a successful response from Oracle. We are ship confirming deliveries, but sometimes the pack slip print has more than one delivery on the print output. This also sometimes happens when we reprint the pack slip (also done with the delivery number). Has anyone else experienced this?

Yes, it was happen to me too.
What is the solution ?
Regards,
Hery Sutanto
PT Anugrah Argon Medica
Indonesia

Manually process GR slip print WE01

Similar Messages

Maybe you are looking for