Manually remove app settings

The twitter application I was using stopped working and was constantly crashing my phone. I deleted the app, yet the settings and options that link in with other apps still remain (instagram etc). Whenever I click on these my phone crashes. Is there a way to totally remove all traces of this? I have tried backing up restoring, updating and a hard reboot yet nothing has worked. It's driving me up the wall. Any ideas?
Jamie.

Sorry I thought I'd quoted the post.
Settings > Twitter
When I click on the twitter option it freezes so I can't get into this menu.

Similar Messages

  • HT5400 If I install OS6 on my iPhone 4, will it retain as intact, all my settings and apps? OS 5 did not do so, which required HOURS of manually restoring apps, settings, etc. I am wary of another complete OS upgrade, so soon. Waiting till answers come.

    If I install OS6 on my iPhone 4, will it retain as intact, all my settings and apps? OS 5 did not do so, which required HOURS of manually restoring apps, settings, etc. I am wary of another complete OS upgrade, so soon. Waiting till reassuring answers come, before attempting install.

    You will get prompt reply if you post your question in the iPhone community forum.
    https://discussions.apple.com/community/iphone/using_iphone

  • Syncing removed apps and settings cannot get some apps, settings and scores back

    When syncing with iTunes 10.1.1 it removed apps after backup and sync, I lost settings , apps and scores
    Tried restore did not work. Using W7

    No significant changes to PC, upgrades to newer version of iTunes and patches to OS. No warning about apps being removed, most apps are re- installed by dragging from iTunes back to phone but lost strings and scores also one app from big fish games seems to think I have not purchased full version
    Thanks

  • Problem with app settings/saves

    Hi guys,
    First post so go easy : )
    Anyway, I just got a new computer and I've used a portable HDD to transfer my library over from my laptop; everything is fine and I’ve authorized the computer to have access to my purchased music/ videos/ apps etc. However, I just connected my iphone to the computer and got a message asking to erase and sync the iphone to the new library. This was expected but I’ve just had a thought: if my apps get erased from the iphone then reinstalled will this delete my app settings / saved games. I’m worried because I had an incident a few months back when I decided to remove all my apps from the iphone to save space; I thought all the saved games etc. would be stored on my pc, since I never deleted the apps from library, but when I went to reinstall the apps I found all the data had been lost (my high scores!!!).
    I had a thought that I could create a backup of my iphone on my old laptop (right click iphone and click backup). I could then sync my iphone with the new computer, transfer the backup across and right click the iphone to restore settings; however, I don’t know if this would work.
    Any help would be great.

    Thanks for the reply.
    Firstly, I am on windows vista. Next, I mentioned that I’ve transferred my library across to my new computer with no problems; I’m also aware that after the 'erase and sync' process all my music, apps etc. will be put back on my iphone. The thing that concerns me is that removing an app from the phone seems to lose all its settings (even if you don’t remove it form iTunes library); is this case for you?
    Hence, I would expect the ‘erase and sync’ process to remove my apps (losing the app settings) and then put the apps back on my phone with no previous associated data. If this is the case, is it possible to copy the backup ‘C:\Users\Username\AppData\Roaming\Apple Computer\MobileSync\Backup\...’ from my old laptop, then erase and sync my iphone to the library on my new computer before restoring settings from this backup (id have to manually paste it into the same folder on the new computer).

  • Problem with checkbox value and app.settings.getSetting()

    Hello everyone.
    I`ve got a problem with getting saved settings for checkbox.
    Saved settings doesn`t apply on checkbox value.
    It`s strange, but it always "true".
    So here piece of code:
    checkMe = 11;    //any value for the first time running
    if (app.settings.haveSetting("savea", "chck")) {                           
                          checkMe = app.settings.getSetting("savea", "chck");  // get saved value, else 11
                          alert("checkMe = "+checkMe)
                        if(checkMe == 11){
                            checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                            alert("You run this script first time, so manual value will be 'false'")
                            }else{
                                checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
         alert("Yes, checkMe will = "+checkMe)       
    win.checkPanel.chkOne.value = checkMe;  /// checkbox value will equal saved checkMe
    var fff = win.checkPanel.chkOne.value;  // string for alert
    alert("aha! but checkbox value is  = " +fff+ "\n Why so?")     // here we`ve got always "true"
    win.checkPanel.chkOne.onClick  = function () {
        var path11 = win.checkPanel.chkOne.value;  //  checkbox value to variable
        app.settings.saveSetting("savea", "chck", path11);  //saving checkbox value
        alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
    win.checkPanel.chkOne.value is always true.
    Can someone exmplain why and how to get rid of this static value?
    P.S. just in case, here is full code:
    function mainFun()
        this.windowRef = null;
    mainFun.prototype.run = function()
        /*----- UI -----*/
              var retval = true;
              var win = new Window("palette", "Check option", [150, 150, 460, 455]);
              this.windowRef = win;
              win.checkPanel = win.add("panel", [25, 150, 285, 265], "Checkbox");
              win.checkPanel.chkOne = win.checkPanel.add("checkbox", [10, 15, 125, 35], "Checkbox One");
              //win.checkPanel.chkTxtOne = win.checkPanel.add('edittext', [140, 15, 230, 35], '');
         win.quitBtn = win.add("button", [110,275,200,295], "Close");
    checkMe = 11;    //any value for the first time running
    if (app.settings.haveSetting("savea", "chck")) {                           
                          checkMe = app.settings.getSetting("savea", "chck");  // get saved value, else 11
                          alert("checkMe = "+checkMe)
                        if(checkMe == 11){
                            checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                            alert("You run this script first time, so manual value will be 'false'")
                            }else{
                                checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
         alert("Yes, checkMe will = "+checkMe)       
    win.checkPanel.chkOne.value = checkMe;  /// checkbox value will equal saved checkMe
    var fff = win.checkPanel.chkOne.value;  // string for alert
    alert("aha! but checkbox value is  = " +fff+ "\n Why so?")     // here we`ve got always "true"
    win.checkPanel.chkOne.onClick  = function () {
        var path11 = win.checkPanel.chkOne.value;  //  checkbox value to variable
        app.settings.saveSetting("savea", "chck", path11);  //saving checkbox value
        alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
              win.quitBtn.onClick = function() {
                  win.close();
        win.center();
              win.show();
              return retval;
    if(typeof(mainFun_unitTest) == "undefined") {
        new mainFun().run();

    Played around with different values, combinations...
    Doesn`t work too:
    checkMe = 111;    //any value for the first time running
    if (app.settings.haveSetting("333", "check")) {                           
                          checkMe = app.settings.getSetting("333", "check");
    alert(checkMe);
                    if(checkMe == 111){
                             win.checkPanel.chkOne.value= false;
                            }else{
                                if (checkMe != false){
                                win.checkPanel.chkOne.value= true;
                                }else{
                                win.checkPanel.chkOne.value= false;
    win.checkPanel.chkOne.onClick  = function () {
        var path11 = win.checkPanel.chkOne.value;
        var path12 = path11.toString();
        app.settings.saveSetting("333", "check", path12);
        alert("Saved value - " + app.settings.getSetting("333", "check"))

  • How to remove apps in iOS 5?

    How to remove apps in iOS 5? I press and hold an Icon like would in iOS4 it starts shaking but x mark does not appear to delete.

    @ Artakv
    Check that you haven't enabled Restrictions, you can turn toggle the ability to delete apps through there.
    Goto:
    Settings
    General
    Restrictions
    Enter your Restrictions Passcode
    Scroll down and check to see if Deleting Apps has been enabled (On - so can delete) or disabled (Off - so CAN'T delete).

  • No internet access using manual TCP/IP settings after 10.4.6

    I stopped being able to access the internet with manual TCP/IP settings in the Network Preferences after updating from 10.4.5 -> 10.4.6.
    When I change settings to use DHCP everything works fine, but I need to get the manual settings working as I use them quite often when configuring/setting-up routers.
    This happens with both the AirPort and Ethernet interfaces, so it doesn't matter which interface I use to connect through.
    My network Locations with manual TCP/IP settings have worked fine with 10.4.5, under the same networking hardware (routers, cables, etc...).
    This occurs both at home (with my Linksys wireless router) and at work (with a DrayTek router).
    At home, this problem occurs with both my PB12 and my wife's iBook12, after the 10.4.6 update was applied.
    At work, all Windows laptops can connect to the internet using manual TCP/IP settings, but not my PB12.
    Example of my settings:
    - IP: 192.168.1.99
    - Mask: 255.255.255.0
    - Router: 192.168.0.1
    - DNS: <empty>
    - Domains: <empty>
    Already tried, without success:
    - verified disk -> no errors found on disk!
    - repaired permissions, using Disk Utility, rebooted and tested -> no connection!
    - tried with DNS=192.168.0.1 -> no connection!!
    - tried with DNS=[my ISP primary dns] -> still nothing!!!
    - even tried reapplying the combo update 10.4.5 -> of course, it didn't let me, as I'm now in 10.4.6!
    Any thoughts or ideas to fix it and make it work in 10.4.6?
    ... other than archive&install, in order to downgrade!
    PB12'' @ 1,33 GHz w/ 768MB RAM   Mac OS X (10.4.6)  

    Yes, buy I also state in my original post that I:
    - tried with DNS=[my ISP primary dns] -> still nothing!!!
    but yes, I probably should have titled it "No network access using..." (posting as 4:30 AM was probably not the best idea :D)
    I understand I might have been a bit clumpsy posting my problem and appreciate everyone's corrections to what I wrote, but trust me that I have done a lot of tests and spent many hours on this... Bear in mind that I am using a network Location with manual definitions that was working before the update!
    Anyway, as it happens, the likely culprit now seems to be more of a 3rd party software's inability to deal with 10.4.6 rather than the 10.4.6 itself!
    I've disabled/unistalled/turnned off/deleted (depending on the app) anything NOT Apple that had anything to do with networking, be it for monitoring, controlling or managing (just to name a few: Little Snitch, Menu Meters, BrickHouse, etc, etc, etc...).
    The Location with the manual settings is now working fine (at least at the office).
    Over the next week or so I'll incrementaly re-install those 3rd party tools (which were most likely not up-to-date anyway) and see if something breaks at some point... but won't put much effort into it -- just happy to see it working again!
    I'm closing this for now, as I don't have any more time for it (work is pilling up!)... If I manage to find out which version/app combination was causing the problem I'll post it back here!

  • How can i remove apps and notifications?

    how can i remove apps and notifications?

    To remove an app from your phone, hold down on the app until it wiggles and hit the X.
    For notifications, settings - notifications - the rest is self explanitory.

  • Remove app-v package powershell

    I'm trying to remove an app-v 4.6SP1 package using powershell. I've registered the snappin using the following article
    http://posh4appv.codeplex.com/
    however when I try to run any commands I get the following error
    PS C:\WINDOWS\system32> Get-AppVPackages
    Get-AppVPackages : Object reference not set to an instance of an object.
    At line:1 char:1
    + Get-AppVPackages
    + ~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [Get-AppVPackages], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,AppVSnapIn.GetAppVPackage

    There's your issue then!
    "The Microsoft App-V Server 4.6 SP1 PowerShell Snapin provides a set of Cmdlets to enable IT administrators
    to manage App-V Server 4.6 SP1 using Microsoft Windows PowerShell."
    If you want to manually add/remove apps from the client with a command line or script you will need to use sftmime.exe:
    http://technet.microsoft.com/en-gb/library/cc817090.aspx
    Dan Gough - UK App-V MVP
    Blog: packageology.com
    Twitter: @packageologist
    LinkedIn

  • Manual removal of iMovie - then can't reinstall

    Needing to make more room on the main drive I manually removed iMovieHD. Wanting to reinstall it i could see no way except to reinstall the whole OSX Tiger. But iMovie did not re-appear !! Was it because it wasn't there at re-install time so it only installed apps that were previously there. HELP

    You are contradicting yourself:
    Wanting to reinstall it i could see no way except to reinstall the whole OSX Tiger. But iMovie did not re-appear !
    If you had lost the disks you could not have reinstalled Tiger. Moreover, if you have lost the disks Apple will replace them for you, possibly for a small charge.

  • Please Help-Removing Apps from Launchpad -OS X- Lion

    I recently downloaded Adobe Master Suite cs5, it became corrupt and i deleted the majority of the installed apps, however I cannot delete the rest of the apps from launch pad, and I cannot find the root files/folders in finder.The apps also appear as if they are missing, with a question mark, any ideas as to how to manually remove/ remove them??Any answers would me much appreciated...Thank You

    or a we stuck totally?

  • Removing Apps from Mac and iPhone/iPad

    Hi all.
    Can someone advise the best way to completely remove unwanted apps please?
    The issue I have is that if I remove the app from my iPhone/iPad and then sync my phone with my iMac, the app just gets put back on the iPhone/iPad.
    If I remove it from the App library, the app seems to just stay on the iPhone/iPad.
    The only way that works is if I manually remove it from the iPhone/iPad and iMac..
    Anyone have an idea of a better way, as scrolling through 350-500 apps (twice) to determine which ones I want to get rid of is a little painful.
    Thanks all...
    Paul.

    Hello Paul Bruen,
    Thanks for using Apple Support Communities.
    You will need to put your device into recovery mode to restore your device to the latest version of iOS since you are currently on a beta version.
    Check for outdated or modified software
    Related errors: 1015, “The required resource can't be found.”
    You might see these error messages if any of these are true:
    Your device has a beta version of iOS.
    You're trying to install an earlier version of iOS (downgrading).
    Your device has unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device to the latest version of iOS.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • Help reordering or removing apps from list

    How can you reorder or remove apps from the list of apps you get to if you swipe to the left of The Hub? I can remove the apps from displaying messages in The Hub, but cannot reorder or removed(hide) them from the list ? It is hard to keep prying eyes from private emails, texts, bbms, with these quick links as is.

    You cannot "hide" apps that appear in the Hub, but you can eliminate the from being displayed in the Hub (and put them back later).
    Open the Hub with the swipe right, then select the three dots in the lower righthand corner. Choose Settings > Hub Management and turn off whatever you don't want to see displayed in the Hub. Just turn 'em back on later when you feel like it. 
    It won't stop prying eyes from simply opening BBM or Test Messages, but at least they won't be on display in the Hub when you're trying to demo the device. 

  • Re-install CSA after manual removal

    My client sent Microsoft's Hive Clean Tool out via SMS and one of the install settings from it caused CSA on all the remote laptops that received it to go into full lockdown mode.
    Thankfully it was only a pilot that 650 users received, but the only way to fix them was to fedex them all a CD that ran a manual removal of CSA using the steps from Cisco.
    Now that they are all back online, we'd like to re-install CSA. When running the original agent kit that installed it, we get a message 'unable to start CSAControl Service'. The service was removed during the manual removal, but is not installed again as a service during the install.
    Platform is XP Tablet. CSA is v. 4.03. We are running the install as an admin. Does anyone have any ideas on getting it to re-install successfully?
    Thanks.

    Where can I get clear evidence of the supported platforms for 4.03? This could be a good reason to go ahead and upgrade all 9,000 tablets in the field.
    Yes on the reboot question. We also have found that we can install 4.0 successfully. We'll see if we can get our hands on a 4.5 agent kit.
    Does anyone know how to totally erase all evidence that CSA was installed on a client? The manual removal was deleting registry keys and some DLLs, but that was not a total uninstall.
    Thanks.

  • In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    Did you set any restriction?
    Settings>General>Restriction

Maybe you are looking for

  • Strange things showing up in navigation addresses and say they are from an ex. How is this possible?

    strange things keep showing up in navigation( short notes from ex) and instead of current location it has his name. How is this possible?

  • Anybody get the update to update?

    So this today at about 6:00pm I'm going through a few tapes on my canon XHA1. I'm viewing the tapes through PRemiere Elements 8 as I'm looking for a particular scene to capture. things are going just as they should. First I turn on PRE8 then rotate t

  • Removing LUNs from Solaris 10

    Hi all, I have a 2-node Solaris 10 11/06 cluster running Sun Cluster 3.2. It's shared storage is supplied from an EMC Clariion SAN. Some of the LUNs used by the cluster have recently been replaced. I now have multiple LUNs on this cluster that are no

  • Ipod loses artwork from random albums

    I have a black 160GB iPod Classic with the 1.1.2 software synced to a Macbook Pro running iTunes 8. All ~60000 tracks in my iTunes library have artwork that I have manually added, and I sync about 9000 of these tracks to the iPod. All the artwork can

  • Why is my blackberry sending out duplicate emails?

     My blackberry is sending out duplicate emails - one for each of my email addresses, regardless of the originating email address. How can I stop this?