Manually removing Exchange Server from Exchange 2010 Organization

Hi everybody, I need some help with a problem removing my last Exchange Server 2003 (the only one now, back-end) from my mixed environment, actually I have one Exchange 2010 server with all the mailboxes, I have replicated public folders and OAB and List
Address Books to it, after that i removed my front end server from my environment but when I tryed to remove my back-end, I have the error 0x80072030 (8240) when I ran the uninstallation of Exchange from Add/remove Programs: I read
tons of articles but anyone helps (i have removed all mailboxes from that server), my last resource is removing the last Exchange Server 2003 from my mixed (2003/2010) organization, I have read articles about to remove Exchange from one server and to remove
Exchange from one site, also to remove Exchange to reinstall after, but my goal is remove Exchange at all because I have Exchange Server 2010 too and finally need to migrate to Exchange 2013 so I need to clean Exchange 2003 manually from my
organizatión.
Please somebody knows a procedure to remove Exchange Server 2003 from Active Directory and left only Exchange 2010 to be able to migrate to Exchange 2013.
thanks in advance.
Felxs
Felx

Hi,
Let’s begin with the following similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/1c10c868-9b1d-43fe-afe1-d630626e2c28/exchange-2003-removal-fails-w-error-code-0x80072030-8240-there-is-no-such-object-on-the-server?forum=exchangesvrdeploylegacy
And we can check the following possible reasons:
1. HomeMDBBL attribute
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f
2. msExchHomeServerName attribute (all pointing to Exchange 2010 server)
3. the "famous" postmaster issue:
http://support.microsoft.com/kb/283089/en-us
We can also try to manually remove the old Exchange Server by:
http://support.microsoft.com/kb/833396
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Removing mailbox server from Exchange 2010 DAG - Node not fully cleaned up

Hi,
We are in the process of decommissioning some old Exchange 2010 servers. I have just attempted to remove one of our mailbox servers and have received a number of errors, related to its removal from the DAG.
I have already removed the Public Folder replicas and all mailbox database copies. I then tried to evict the server from the DAG and received the following warning:
I then ran the command that was recommended, from another server and in an administrative command prompt:
I have looked in this log on both the server I ran the command on, a CAS server, and the mailbox server itself and can see no evidence of this error 2 that is listed here.
If I run the Powershell command to look at the DAG I cannot see it there any more. I am assuming that this error message might only be an issue if I was planning on re-using this server somewhere else in Exchange or perhaps adding this server to another
DAG. But I just want to decommission it.
Can anyone put my mind at rest as to whether this is a genuine concern or not. If not my next step is to uninstall Exchange 2010 from this server and turn it off.

Hi Belinda,
I get the following:
[PS] C:\Windows\system32>Get-DatabaseAvailabilityGroup
Name Member Servers
Operational Servers
DAG01 {WSR-EX-01, WSR-EX-101, WSR21}
It doesn't look like that server is part of the DAG any more as far as I can see. I just can't explain that error message reported from the cluster command. As far as I can see the server is isolated. I already removed its database copies as a pre-requisite
before removing it from the DAG as per this guide:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_27039933.html
I found a nice little script that gave reports on your Public Folder configuration and it highlighted that some of our folders were not being replicated properly across our mailbox servers. This helped me in removing these services from the server.
It is currently doing nothing at this time as far as Exchange Services are concerned.

Upgrading Exchange Server 2003 to 2010 to 2013 is worth???

Hello there, I am planning to upgrade about 30 users from exchange server 2003 to 2010 and finally to 2013. Is it worth to upgrade in this way because this steps are hard and very time consuming. What if, if I just copy all the user mailboxes directly to
exchange server 2013 and configure 2013 as a new exchange server and decommission old exchange server 2003?
How to copy user mailboxes to fresh exchange server 2013?
Please help me out.
Thankx

Yes, Export the PST from User Mailbox and Import it into Exchange 2013 Mailbox. But the problem is, you can't install Exchange 2013 in your current Exchange 2003 environment.
Only option is to install Exchange 2010 first and migrate all the users to Exchange 2010. Also Replicate the Public Folders too(If you are using)
Decommission Exchange 2003 entirely. Install Exchange 2013 SP1 and Migrate the User to Exchange 2013.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)

Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
Thanks

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

[svn:fx-trunk] 13358: Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build .

Revision: 13358
Revision: 13358
Author:   [email protected]
Date:     2010-01-07 17:10:34 -0800 (Thu, 07 Jan 2010)
Log Message:
Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build. We need to work with the doc team to make sure future drops do not contain this whitespace.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-24896 - playerglobal_rb.swc has dita content that is not encoded correctly
Reviewer: For Jim, Jeff
Tests run: ant other.locales
Is noteworthy for integration: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24896
Modified Paths:
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/__Global__.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.net.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.events.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/authoring.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.accessibility.xm l
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.data.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.desktop.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.display.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.errors.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.events.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.external.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filesystem.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filters.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.geom.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.html.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.media.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.drm.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.printing.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.profiler.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.sampler.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.security.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.system.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.engine.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.ui.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.utils.xml
    flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.xml.xml

Thats good news.

Migration of Unity users from MS Exchange server 2007 to 2010

Hi,
I am having Unity 7.0 with MS Exchange server 2007,now want to transfer the users and Unity mailboxes to MS Exchange server 2010. Want to know the procedure. Can anyone help me out?

The way you're doing it has two very high hurdles.
First, you have to get the data out of an offline server and into Office 365. That's hardly a trivial task. If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Manually Move Public Folders from Exchange 2010 to 2013

Hi all,
I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
The final error is the following:
FailureCode                      : -2146233088
FailureType                      : SourceMailboxAlreadyBeingMovedPermanentException
FailureSide                      :
Message                          : Error: Couldn't switch the mailbox into Sync Source mode.
                                   This could be because of one of the following reasons:
                                     Another administrator is currently moving
the mailbox.
                                     The mailbox is locked.
                                     The Microsoft Exchange Mailbox Replication
service (MRS) doesn't have the correct
                                   permissions.
                                     Network errors are preventing MRS from cleanly
closing its session with the
                                   Mailbox server. If this is the case, MRS may continue
to encounter this error for
                                   up to 2 hours - this duration is controlled by the TCP
KeepAlive settings on the
                                   Mailbox server.
                                   Wait for the mailbox to be released before attempting
to move this mailbox again.
So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
FailureCode                      :
FailureType                      :
FailureSide                      :
Message                          : Informational: The request has been temporarily postponed because the mailbox is
                                   locked. The Microsoft Exchange Mailbox Replication service
will attempt to continue
                                   processing the request after 2/14/2015 12:38:20 PM.
Finally, digging more into reports of migration I found this:
MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2
exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354
StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
Regards!

What script and process you are running to migrate the Public Folders?
And what do you mean by Manually?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.comTwitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Excahgne 2013 outlook 2010 don't update folders from exchange server, from owa send and receive is ok

I have exchange 2013 server, with database for each department last week we have power problem, servers down
after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
i try to delete outlook profile and create it again i get folder has not yet been updated
i try to repair exchange database again, but the same problem
i try to move it to another database or another server but move fail
if i use outlook online (remove use cached mode) its receive new mails.
Any help?
Thanks

Hi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support

Removing Public Folders from Exchange 2007

Hello
I am part way through migrating from Exch 2007 to 2010.
All my mailboxes are over and the new server is working as I want it to. The problem has come when trying to un-install the 2007 server. I get the following error:
Summary: 3 item(s). 2 succeeded, 1 failed.
Elapsed time: 00:00:20
Mailbox Role Prerequisites
Failed
Error:
Uninstall cannot continue. Database 'Public Folder Database': The public folder database "JUPITER\Second Storage Group\Public Folder Database" contains folder replicas. Before deleting the public folder database, remove the folders or move the replicas to
another public folder database. For detailed instructions about how to remove a public folder database, see http://go.microsoft.com/fwlink/?linkid=81409.
Recommended Action: http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.12&id=b6e3b32a-8848-46cb-9567-72288ac15f60
I've gone round google at least 3 times now reading posts about moving the mailboxes and force-able removing them but nothing works and the folders remain. Below is what I get when trying to follow the standard process of moving them.
[PS] C:\Windows\system32>MoveAllReplicas -Server Old -newserver new
Set-PublicFolder : The parameter "Replicas" cannot be $null or an empty array.
At C:\Program Files\Microsoft\Exchange Server\Scripts\ReplaceReplicaOnPFRecursi
ve.ps1:147 char:24
+ $_ | set-publicfolder <<<< -server $_.OriginatingServer;
   + CategoryInfo : InvalidOperation: (\NON_IPM_SUBTRE...ne Address
   Book:PublicFolderId) [Set-PublicFolder], InvalidOperationException
   + FullyQualifiedErrorId : 7492CDDB,Microsoft.Exchange.Management.MapiTasks
   .SetPublicFolder
I'm not the most experienced exchange admin so it could be something simple ive over looked.
Thanks in advance.

If you can confirm the PF's have been replicated properly and rehomed to the Exchange 2010 Server then you can just manually remove the Ex2007 PF store, I have had to do this a few times so I could just get the Ex2007 uninstall to proceed.
In ADSIEdit, go to Configuration, Configuration, Services, Microsoft Exchange, FirstOrganization, Administrative Groups, Exchange Administrative Group, Servers, Servername, Information Store, First Storage Group. Then on the right hand pane, highlight
the Public Folder Store and Delete it.MVP Exchange Server

Removing AD DC from Exchange infrastructure -- Outlook complaining The bookmark is not valid

Hallo,
I have a setup of 2 Exchange 2007 servers 2xCAS + MBOX plus an Exchange 2010 (not in use yet), 4 AD DCs and some more servers like BlackBerry.
I am trying to switch off one of the DCs -- an old windows 2003 server.
I have migrated the FMSO roles, updated the DNS setting on all servers and now I would like to switch off the 2003 AD DC.
BUT: when I do this, everything works fine:
   * Mail goes in and out,
   * OWA works,
   * BlackBerry is fine,
   * Outlook 2003/2007/2010 with previously set-up accounts works just fine,
   * adding new accounts also seems to work.
Except for I cannot configure a new account in Outlook (any version).
When I create a new profile and configure an account I get: The bookmark is not valid
afrer filling in the login and password.
I am using the HTTP proxy for RPC (Outlook Anywhere is it called I guess). I verified the rpcredirect.dll manually using a web browser -- it seems OK -- empty page as the docs say. I checked the logs of the IIS -- no problem.
I don't know where to search on the Exchange side :-(
I googled and found some references to GC but I have a GC on every AD DC, so it should be fine. Also I found some references to OAB but I cannot see any problems with OAB -- well I don't know much about OAB :-(
To quick-fix the problem I finally had to start the old AD DC again, but the problem persisted. Later after checking everything that came to my mind I rebooted the Exchage where the Outlook clients connect to and now I am up and running again (this proves
that I have the Outlook client settings filled in right).
I really need to remove the old windows server 2003 AD DC, so keeping it up is not a solution for me :-(
Any tips and hints highly welcome.
Regards,
Martin Povolny

Sure. I hope I am sending it in the format you assumed.
This is now:
Process STORE.EXE (PID=4952). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
AD2.XXX CDG 1 7 7 1 0 1 1 7 1
ad3.XXX CDG 1 7 7 1 0 1 1 7 1
AD4.XXX CDG 1 7 7 1 0 1 1 7 1
ad5.XXX CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
this is when the AD2 was up but w/o the GC role:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=220). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
AD2.XXX CD- 1 6 6 0 0 1 1 6 1
ad3.XXX CDG 1 7 7 1 0 1 1 7 1
AD4.XXX CDG 1 7 7 1 0 1 1 7 1
ad5.XXX CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
this is when the AD2 was off
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=432). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
ad3.XXX CDG 1 7 7 1 0 1 1 7 1
AD2.XXX CD- 1 0 0 0 0 0 0 0 0
AD4.XXX CDG 1 7 7 1 0 1 1 7 1
ad5.XXX CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
this is before that, when the AD2 was running
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
AD2.XXX CDG 1 7 7 1 0 1 1 7 1
ad3.XXX CDG 1 7 7 1 0 1 1 7 1
AD4.XXX CDG 1 7 7 1 0 1 1 7 1
ad5.XXX CDG 1 7 7 1 0 1 1 7 1
I don't know how to check which DC is being used (or what type use do you mean), but when I run the netstat on the Exchange server I see connections to ldap and msft-gc on several AD DCs like this:
  TCP mbx:1164 AD5:ldap ESTABLISHED
  TCP mbx:1169 AD2:ldap CLOSE_WAIT
  TCP mbx:1203 AD5:ldap ESTABLISHED
  TCP mbx:1209 AD5:ldap ESTABLISHED
  TCP mbx:1213 AD2:msft-gc CLOSE_WAIT
  TCP mbx:1219 AD5:ldap ESTABLISHED
  TCP mbx:1247 AD3:msft-gc ESTABLISHED
  TCP mbx:1249 AD2:msft-gc ESTABLISHED
  TCP mbx:1251 AD5:msft-gc ESTABLISHED
  TCP mbx:1253 AD4:msft-gc ESTABLISHED
  TCP mbx:1264 AD5:ldap ESTABLISHED
  TCP mbx:1278 AD5:ldap ESTABLISHED
  TCP mbx:1279 AD5:ldap ESTABLISHED
So from that point of view all DCs seem to be used.
Thanks for you time and regards!
Martin Povolny

How to import PST to Exchange 2007 from Exchange 2010

Hello everyone,
I have a problem with importing PSTs to Exchange 2007 mailboxes.
I exported PSTs without problem on Exchange 2010 using New-MailboxExportRequest but I run in several problems with importing PSTs on Exchange 2007.
I created VM with Windows XP, 32bit Exchange Management tools and Outlook 2007 because it's needed for importing/exporting in Ex2007 Envinroment. I created separate account for imporing PSTs, grant him rights to Exchange server and specific mailbox but I still
got this error while importing: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147219968 or sometimes import run without any error but no messages are imported (also it is processed very fast).
I use Import-Mailbox -identity <user> -PSTFolderPath <Path>
Do you know what causing this issue and how to fix it or how to import PST to Exchange using different aproach?
Thank you

Hi,
Please make sure that your account has proper permissions
Exchange Server Administrators role
Local Administrators group for the target server
Full access to the target mailbox
In addition. what’s size of that PST file? If it is too large, it might be corrupted and we may need to export it again from Exchange 2010.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Retrieving Mails from Exchange or from outlook 2010 using TSQL

Hi,
Will you please provide step by step queries to retrieve mails from directly from Exchange Server or else retrieving mails from the outlook 2010 which is connected Exchange Server.
I have SQL Server 2012 developer edition, outlook 2010 and no idea what version of Company Exchange Server available.
I google this solution but not successful. Mostly example i found old Exchange or SQL Server 7.0
Thanks.

Hi Visakh,
Will you please assist here :
EXEC sp_addlinkedserver 'exchange',
'Exchange OLE DB provider',
'exoledb.DataSource.1',
'file:\\.\backofficestorage\localhost\public folders'
- I don't have "Exchange OLE DB Provider"(exoledb.DataSource.1) in my Linked Server connection, from where can I download so that it can view in SQL Server Linked Servers.
Will you please let me know the path('file:\\.\backofficestorage\localhost\public folders'), what exactly it is. Is it .pst/.ost file location.
Thanks.
Best Regards
Kashif Chotu

Migrating Exchange server from 2007 SP3 to 2013

Hi All,
We are planning to migrate our exchange server 2007 SP3 to 2013 , what are all the best options available?
Thanks,
Mani L
Mani L

Hi,
Here are some articles which can help you to migrate from Exchange 2007 to Exchange 2013 for your reference.
Upgrade from Exchange 2007 to Exchange 2013
http://technet.microsoft.com/en-us/library/jj898581(v=exchg.150).aspx
Checklist: Upgrade from Exchange 2007
http://technet.microsoft.com/en-us/library/ff805032(v=exchg.150).aspx
Install Exchange 2013 in an Existing Exchange 2007 Organization
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Remove a domain from Exchange 2003, now other domains cannot send to the old domain error 5.1.1

We have a single Exchange 2003 server. We have multiple mail domains on the server, but are slowly moving to a hosted email solution. I moved the first domain, I will call it
domainABC, to our hosted solution. I have removed all exchange mailboxes from the users, and deselected the domain from Recipient Policies. I then ran the policy.
Whenever I send an email to anyone on Domain ABC from any other domain on the Exchange server, I get the 5.1.1 message. I am not sure what to do next - any help would be appreciated...
Brian

Hi Brian,
Could you post the detail information for the NDR message?
When you migrate all the users to the host email server, did you change mx record point to the new server?
You also can use this tool to help you check for the inbound email test (for Domain ABC).
Exchange Remote Connectivity Analyzer
https://www.testexchangeconnectivity.com/
Thanks,
Evan Liu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Evan Liu
TechNet Community Support

How to create a Folder Tree in Exchange Server from a Java progarm.

hi all,
I am using Microsoft Exchange Server 2000. I have a requirement of creating the following things from a Java program.
1) Creating a Folder Tree
2) Creating a Mailbox Store
3) Creating a Public Store
4) Creating a Recipient Policy
5) Creating a Storage Group
6) Creating a Mail-Enabled Recipient
7) Adding a new UPN suffixes
If any of you have worked on such requirement can you please provide me with some information regarding the same.
Thanks & Regards
Anil

Any luck with this Anil?
I would like to query exchange for the list or recipients on a given mailing list.
Please inform if there is any documentation that may be helpful.

Manually removing Exchange Server from Exchange 2010 Organization

Similar Messages

Maybe you are looking for