Manually set IP addresses not working as needed

We have setup our DCHP server in that we manually not dynamically give IP addresses to workstations according to there mac addresses. But most of the time the the workstations go and get the IP addresses dynamically, and in this case most of the time we get IP conflict. Does it mean the giving IP addresses manually does not work properly in the DHCP configuration. For reasons, we need to use Manually assigned IP addresses not dynamically. And how can I trace why the manually configured workstation go and get IP addresses dynamically ?

It should work properly. Please post your configuration.

Similar Messages

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • Manual Authorisation Objects is not working

    Hi Experts
    I have created a manual object in that i have added 2 fields
    VKBUR
    VKGRP
    ACTVT
    The same i have added in su24 also and marked yes for checking also.
    But when i making the transaction it's not working. i need your suggestion how to control the transactions thru manual objects.
    Thanks in advance
    Regards
    Venkat

    Hi,
    Maintaing SU24 does not insert the required auth check code in the program behind a transaction, it mainly controls the objects and default values that appear in the authorisations tab when assigning transactions to roles. Although it is possibe to deactivate a check from SU24 as well.
    Speak to your developers about introducing the neceesary auth checks for your required object, that is the only way that it would work.
    If you search the forum you will find quite a few posts around the maintenance and use of SU24.
    Regards

  • HT5312 Rescue email address not work and I forget my security question answers

    Rescue email address not work and I forget my security question answers

    If you don't have access to your rescue email account (you won't be able to change it until you can answer 2 of your questions), or you aren't receiving the email to it, then you will need to contact iTunes Support or Apple to get the questions reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down the page that you posted from to update your rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • I restored my iphone and updated it but the progress didn't complete and now my iphone is not working. i need help asap.

    my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou

    it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

  • I purchased my iphone 4s from US, my lock button is not working, I need to get it repaired in India. Please suggest

    I purchased my iphone 4s from US, my lock button is not working, I need to get it repaired in India. Please suggest

    There is nothing you can do except take it back to the US. The warranty is not international and no authorized service center will touch your US phone in India.

  • TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

  • Home Page setting option is not working. Home Page always reverts back to Modzilla Firefox Start Page.

    Home Page setting option is not working after saving a new or different home page on Firefox 19.0. When opening a new page (not tab) it always reverts back to the default "Modzilla Firefox Start Page" no matter what.

    That was it! There was a duplicate preference file in the profile folder. Followed the instructions under "Locked Preferences File" to
    6. Delete any prefs-n.js files where n is a number (e.g. prefs-2.js).
    Once I deleted it I was able to then save my preferred home page.
    Thanks!!

  • Buy From Japan iphone 5 now am in ksa. but ksa carrier not working i need to work all sim card my iphone

    Am buy from Japan iphone 5 now am in ksa. but ksa carrier not working i need to work all country sim my iphone

    There are no officially unlocked iPhones sold in Japan, and none of the Japanese carriers offer official unlocking for the iPhone. Thus, there is no way to get any Japanese iPhone officially unlocked to work anywhere other than Japan
    Sell it, as you will not be able to get it officially unlocked.

  • TS3406 Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

    Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

    If it has been officially unlocked, it will stay unlocked after an update:
    iPhone: About unlocking

  • CS3 asked serial number suddenly and the box-set serial number not work.

    CS3 asked serial number suddenly, and the box-set serial number not work.

    Elton Adobe which web browser are you utilizing?  Are you signed into http://www.adobe.com/ when you attempt to contact our support team directly at Contact Customer Care.
    I would recommend utilizing a different web browser and contacting our support team directly as suggested by KGlad in message #6.

  • Dynamic IP Address not working on MBP

    Hello:
    I am experiencing a problem with my MacBook Pro not being able to assign an IPv4 IP Address when "Using DHCP" is selected for either a wifi or ethernet connection.   In order to be able to connect either device, I have to manually add an address (i.e., 192.168.0.36) & use "Using DHCP with manual address" instead.
    It is interesting to note that all other devices on my home network work perfectly and all use DHCP and have addresses assigned to them.   These devices include iPad's, iPhone's, AppleTV, etc...  The only device that does not work is my MacBook Pro.  Thinking it was a network issue, I reset my DSL router as well as my Airport Extreme to default settings and re-configured my network.  This proved to be of no use.
    Has anyone else expierienced this issue and know a possible solution? 
    Thanks in Advance.

    If you have the public on the WAN of the router, you do not need it on the server.  The server wants to be a static on the same range as the LAN of the router.  If you have the router LAN set as 192.168.1.1 (which is the default of most out there)
    you want the IP of the server to be something like 192.168.1.10, with the same subnet mask of the LAN of the router (Usually 255.255.255.0) and the Default Gateway of the server to be the LAN IP of the router (in this example: 192.168.1.1).  For DNS,
    you probably want to set the LAN IP of the router, as the router should send any requests to the public DNS set by the ISP.
    This should get the server back online.  

  • E2000 setting priority is not working for one PC

    my home has a max download speed of 300 KB/s. which can make gaming quite an issue if someone in the house starts using something that is a bit of a drain on the bandwidth.
    i fixed the issue for a few months by setting the gaming console to be the only device with high priority. but for some reason my sisters hp laptop still drains all the bandwidth shen he loads youtube. and the only way to stop it is a mac address block on that computer so the game isnt literally frozen still.
    i need to figure out how to get the priority working against this device.

    In this section, you can set the bandwidth priority for a variety of applications and devices. There are four levels priority: High, Medium, Normal, or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority.
    To Enable QoS service on your router you can follow this link and follow the steps on the website: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=05ef4bac579a47d39d9454a4b0583cbf_1701.xml&pid=80&r...
    Second, let me know the current firmware version in the router management page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=df680dece5cd4f7ea8141ea0026db71a_4046.xml&pid=80&r...

  • Richard Huggins/Art ? email address not working Reply here

    I received this email.
    The return address does not work.
    On 13 Mar 2006, at 22:51, art wrote:
    On 3/13/06 1:13 PM, Richard Huggins wrote:
    My daughter has the world's cutest toddlers and a PC. I, grand-dad, live 300
    miles away and have a MacBook Pro with the built-in camera. So you now
    understand my subject topic!
    I'm new to the video chat stuff, so I'd appreciate help with what she could
    use and I could use and us both see/hear each other. (She mentioned that She
    has Skype, but Skype's Mac version does not yet support video.) I'm thinking
    that I can't use iChat for this, but if I'm wrong let me know.
    Thanks,
    Richard
    Sent using the Microsoft Entourage 2004 for Mac Test Drive.
    Richard,
    This might be possible depending on the configurations of the computers and the speeds of the communications links that you both have. iChat can be a bit tricky to set up for audio/video sessions, especially if there are one or more firewalls involved.
    There's an excellent narrative on the specific topic of iChatPC at:
    http://www.ralphjohnsuk.dsl.pipex.com/page12.html
    You might check out the iChat forums in the Apple discussion groups at:
    http://discussions.apple.com/category.jspa?categoryID=139
    There is a wealth of knowledge and assistance about iChat related issues on these forums. There tends to be more active discussions regarding iChat related issues then here in the Usenet groups.
    If you are unsuccessful with iChat, try Sight Speed (www.sightspeed.com). There are free clients for both Mac and PC. Unlike iChat, it is client-server based (iChat is peer-to-peer) so there are less obstacles to success.
    It doesn't have as good video/audio quality as iChat and the echo suppression isn't as advanced, but it is much easier to set up. Also, unlike iChat, the conferencing capabilities (more than two users) are not included with the free versions.
    HTH...
    Regards,
    Art
    My reply was
    Hi,
    iChat will Video chat to the AIM 5.9 Application or Trillian Pro ($25) run on a XP PC.
    Both ends need some settings up. The AIM application more, with an extra "Tuning" stage.
    The AIM application needs the Tuning and Enabling through the XP firewall (links to Tuning and an Explanation of the Firewall stuff on the Page 12 link)
    The Trillian needs just enabling though the XP firewall.
    Both ends also need to make sure the applications involved can also get through the routers and modems involved.
    This page has links to Real People testers and some Autoresponding test accounts. Both ends should try contacting the autoresponding accounts and then with a selection of the Real People, to see where they are up to. Then Try PC to PC and Mac to Mac before trying Mac to PC (Or the other way round).
    This list has some cross platform stuff
    There is also YakforFree iVisit and others out there.
    I hope this helps whoever sent the email.
    4:58 PM Thursday; March 16, 2006

    Hi ernestw31,
    First make sure that you're using the email address that you used to set up your subscription. If you are and still can't sign in, please contact Adobe Customer Support; an agent can help you resolve your account issue.
    Click the Chat link at https://www.acrobat.com/misc/en/contact-support.html. Chat is available from 5am – 7pm PST.
    Please let us know if you need further assistance.
    Best,
    Sara

  • Erec - leaving action deleted internal candidate email address not working

    Good morning
    We have the following situation:
    1. A person was made a leaver in HR with future leaving date.
    2. Decision was made that the person could actually stay so the leaving action was deleted in HR.
    3. In erec in SU01 person still showing as role RCF_INT however the email address (produced from IT105 subtype 0010 in HR) was blank and his Alias field populated with his employee number ie: as if he was a leaver still.
    4. I have manually updated the email address in erec for his internal email address - this did not let him apply for an internal job. I then deleted it in IT105 in HR and then recreated it in IT105 - this has gone across to Erec however he still cannot apply and the Alias field is still being populated.
    So erec is behaving as if he is part internal and part external! How can I stop the Alias field being populated for him and how can I then get the email address to work?
    many thanks
    Dawn

    Hi Nicole
    Thank you. The order of events was as follows:
    a. On 25.01.11 a leaving action was done to start 01.04.11
    b. A decision made in March that the individual could stay however the leaving action was not deleted until 08.04.11
    c. This meant that he became a leaver in erec and due to subsequently deleting the leaving action he has reverted to INT_CAND (which is what we want).
    I have managed to get the email address to work by deleting the IT105 subtype 0010 in HR, I then recreated it in HR and it has PFAL'd over to erecruitment so the user is now able to apply for jobs.
    However the Alias field is still populated and the user has an additional employee number in erecuitment. Are you able to advise how the alias field can be depopulated?
    Many thanks
    Dawn

Maybe you are looking for

  • Two cost objects Sales order , OKB9 business area +order

    Hi All, While posting intercompany IR system thronging below error messageu2026 Enter only one true account assignment Message no. KI249 Diagnosis You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been

  • Problems with secure PDFs in Preview

    I recently saved and secured a PDF with Adobe Acrobat 9. While the document is secure when I open it with Adobe Acrobat or Reader, there is no security when I open up the same document with Preview... So much for the 256 bit encryption... Has anyone

  • Why can I not open documents in Pages that were created in Pages?

    I am using the most recent update to Pages.  Unfortunately all the documents that I had within the previous version of Pages will not open within the new Pages. Equally, I cannot open any documents that I have just created with the new Pages either.

  • IMovie cruelty

    Hi, I use Aperture to edit my photo's, and am trying to get my Aperture pics into an iMovie, but... even with the dimensions of 1632x1224, the quality of the photo in the HD 1080i iMovie files is still sh!thouse. Do you know why iMovie is being a b!t

  • Migrating to new imac 24"...BIG problem

    Got my new imac 24"..connected it to old G4 733...connected them with firewire and used migration assistant. NOW...there seems to be none of my old stuff on the new imac AND the g4 ,when started,beeped three times then power light flashes. AAAAGHH!!!