Manually trigger PO Creation for a SC

Hi Experts,
Due to downtime issue one SC is created but the PO creation did not take place. The SC is stuck in I1111 " Item in Transfer Process" but the PO never got created. Is there anyway I can trigger the PO creation manually. The system is SRM 7 in Ext. Classic Scenario.
Thanks

Hello,
Check note 1480994. It provides some inputs.
Regards,
Ricardo

Similar Messages

Trigger Second Interface for the same Creation event

Hello all,
I have to send my every created equipment to two different systems.
I created Custom function Modules which create individual Idocs.
I called these function modules in Methods and we created two custom Tasks to trigger workflow creation event.
Problem is system is not accepting the second event triggering. It is showing
'Feed back After error'
'Deactivating' --- In Event Trace, and it is deactivating the second link in SWETYPV and first event is working fine.
First Event was developed long back and we did for second event now.
Did i miss something for my new Tasks?
If i change the setting of Event delivery to '(always) Using Queue ' for second event in SWETYPV,
It is not showing error but event trace is showing that second event is in Queue?
How to process this Event?
Thanks,
Krishna.

Hello,
It was Checked already..
still not working..
Event Trace error was giving this error also..
'Event EQUI CREATED for task TS90100007 not defined as start/end event'.
Regards,
Krishna.
Edited by: Krishna on Sep 11, 2009 3:32 PM

Number Range Creation for Manual profit Center

Hi all,
Where do we maintain numbe range creation for manual profit center documents

Hi,
Maintain all number ranges for controlling area in KANK.
Regards,
Sadashivan

Manual replica creation for Hyper-V

We have several remote hyper-v hosts that we want to move to DPM. The problem is capturing the initial replica since the WAN bandwidth is limited. The procedure for manually creating a file share replica is very straightforward. Is there a TechNet
article on manually creating a replica for a protected Hyper-V guest? Has anyone gone through the process?
Rob

Better outline of the steps to seed replica.
Create the protection group on the DPM server and choose to protect the Hyper-V VM. Choose to manually create the replica in the wizard.
Select the protected VM in the DPM console in the protection view.
Click on the "Click to view details" to get the replica path.
Highlight the row listed and right-click, choose Copy
Paste the path it into notepad or equivalent
Copy the path from C:\ to the end to the clipboard.
This path will be used in the following steps.
Go to a command line
Run psexec -s cmd to get a command shell as the system account
cd "C:\...." where C:\... is the pasted value from the copy above
cd "Virtual Machines"
cd servername where servername is the only subfolder in this directory
Copy the vhdx into this directory.
Rob
EDIT: Note that the path names I've listed above are dependent upon where your files are located. You're path to the VHD will be the same as it is on the physical machine. So if you keep your VHD in D:\myvm\myserver then your DPM path after the
GUID will be Full\D-VOL\myvm\myserver. Copy the VHD into that folder.

Issue in Planning file entry creation for materials

Hi all,
There are some materials for which there are no planning file entries inspite of having MRP data and valid MRP type.
The reason (1) could be that those materials might have been created before MRP was activated for that plant. Another reason (2)is that materials created by certain batch SAP programs do not trigger the creation of a planning file entry automatically, the way a MM01 normally does when you create a material. Otherwise when a material is created with MRP data & valid MRP type, the material will be automatically included in the Planning File.
Please let me know whether my understanding on the above( reason no.1 & 2) is valid or not. Is there any SAP / OSS document / SAP help related to this information on reason (2) that you can share with us? If you could share any link of any such document, it will be really helpful.
Thanks a lot,
Regards
Brijesh

Dear,
Reason could be
System will maintain the Planning File Entry Automatically once MRP is activated for particular Plant (T.Code OMDU).But if Materials are created Before this activation then you have to do manual entry of those Materials in Planning File using T.Code MD20 or using Background job MDBT.
If you create the materials or upload materials before activation plant for MRP this may be the cause for this.
Go to OMDU here is tick mark for plant activation for MRP if you activated after material master creation then system will not create planning file entry for these material.
In my case every thing was maintained than also no planned order generated? Pls put some more fact on this.
Before running MRP we used to run MDRE. But in the result spool list there is no content
Create the variant and run it in Back ground
For this you need to you need to create the variant for planning file entry and its consistence check in OMDU and execute it to avoid such type of issue.
Hope clear to you.
Regards,
R.Brahmankar

Business Partner creation for Customer Master creation

Hi
We have customized our system in order to trigger the creation of Business Partner whenever a Customer Master is created.
I created some customers for which the Business Partner creation was not triggered due to some reason.. In order to manage the same, i created a Business Partner manually and tried to link the same to my customer through T Code FLBPD2, but system returned with a message "The business partner could not be linked to the customer selected" Message Number CVIC_UI023.
Can anyone suggest something.
Thanx in advance
Pankaj

Hi Pankaj,
Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
Active Synchroniztion Options
Set BP role Category for customer Integration
Define BP Role for direction customer to BP
Field Assignment for customer Integration
Thanks
Veman.

Manual Staging, TR creation WM/PP integration

Hi
We defined Material Staging Indicator as 4 in Control Cycle
How do we trigger TR for this materials manually???
When i go to Change production Order and WM pick list Requested quantiry/confirmed Quantory is Blank only requirement qty column has values
How i can enter quantities manually and trigger TR
Please help

When i click log it isay 'Manual staging not picked directly for order'
How do i stage/How do i give require qty and trigger TR creation
Please help

Automatic TO creation for delivery

Dear Experts ,
We are facing a problem with Automatic TO creation for delivery only in some storage types ( not all the types , some types are working fine )
The problem happened after we applied a user exit for a specific picking strategy , but even after we have cancelled that user exit still problem remained.
We have checked the following settings, and everything seems fine:
1-Warehouse management - Activities u2013 transfers u2013 define Mvt type
2-Warehouse management u2013 interfaces- Automatic TO creation
Looking for your help in this issue
Thanks ,
Malik

Hi Malik,
You mentioned that you have previously implemented the picking user-exit and removed it later. Did you enter the correct picking strategy for the effected storage types after removing the user-exit? This could be one reason.
What happens when you try to create the TO manually?
Regards,
Osman

LaserJet 1100 won't print in WordPerfect X4 unless manual button is pressed for each page.

Hi - I'm using a Toshiba Satellite - Windows Vista 64 bit operating system. When using WordPerfect X4, I can't get my HP LaserJet 1100 to print unless I manually push the button for each page. I have no problems getting it to print automatically in Word or with .pdf documents. Something is not compatible with WordPerfect. It was printing fine to begin with, but once I printed an older version of Avery labels, it seemed to trigger this need to have to manually press the big button. Help!

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Screen become blank during the Manual Target Group creation

Hi SAP,
In the Marketing Segmentation, there is an option to allow the manual Target Group creation. I have a list of 5000 BP and I upload it via "Import Business Partner". It is just 5krecords and the screen goes blank. We have tried several times and encountering the same thing which there is no enhancement applied. Any idea if there is limit on BP to be uploaded?

Hi Subhashish,
High Volume Segmentation is recommended for segmentation activities for more than 500.000 BPs. In your case Classic Segmentation fits perfectly.
Please read the SAP documentation for more information:
Segmentation - SAP Library
Furthermore since the Import Business Partner functionality is not Java based this cannot be a Java problem.
Do you receive a dump in transaction "st22" after trying the import?
Regards,
Markus

Manual entry of batches for finished product

Dear Guru's,
I want the manual entry of batches in the production order & automatic batches for raw materials. I have maintained the autoamtic batch number assignment as Inactive in T-code OMCZ. After maintaing this system is asking for manual entry for batches for raw materials also. I want the manual entry for production order & automatiic entry for raw materials.
I have changed the setting to " No automatic batch creation in production / process order" in production scheduling profile through T-code CORY. Assigned this production scheduling profile in work scheduling view. Even though I am facing the problem.
Hope it is clear. Need your inputs.
Regards
Kalyan

Dear,
Kindly follow the path > logistic general > Batch management >Define Batch Creation for Goods Movements (here you can use function for creation of batch against movement type)
> logistic general > Batch management > Define Initial Creation of Data for Batch Master Transaction (Here you can use function for creation of batch against material type)
Kindly check and revert back.
thanks
Muhammad Ashfaq

Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi,
I have done appraisal document creation for bulk using txt file.
this fm used for single for creation in standard tcode (phap_prepare): 'WZ_HRHAP_0DOC_WZ01_START'.
So create ztcode usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
While recording for single I have used manual option instead of automatic .

House banking, manual cheque lot creation,

hello,
house banking, manual cheque lot creation, the first feild to enter is payment document number, from where we get that payment document number, just entered the payment posting number, but count not save ,

Hi
for House bank creation use T.code -FI12
For Check lot creation -
FCHI

Manual billing event creation using form(Bill,revenue)

Dear Dina,
During Manual billing event creation the mandatory columns have set by oracle as Bill amount and Revenue Amount need to be filled, always this bill amount and revenue amount is going to be the same amount.Also for the advance,invoice,retention for all the cases it needs to be filled..what z the purpose behind it??
what it z indicating???Kindly help me to understand...
thanks a lot n advance....

Hi
The revenue amount of the event will be included in the draft revenue.
Draft revenue accounting is -
Credit Revenue
Debit UER (unearned revenue) or UBR (Unbilled receivables). The system will choose one of those accounts, based on the balance between total revenue and total invoices on that project. When total revenue exceed total invoices sytem debit UBR.
The invoice amount of the event will be included in the draft invoice.
Draft invoice accounting is -
Credit UER or UBR (depends on the balance of both).
Debit the Receivables account
Dina

** Is it possible manual trigger when JDBC is sender

Hi Friends,
Is it possible manual trigger to send the new records to the JDBC sender adpter ? Instead of Stored Procedure or SQL statement (Stored Procedure) in 'Query SQL Statement' parameter ?
The purpose is instead of JDBC poll at frequent interval,we want to send newly inserted record whenever required.
Any idea friends, to do this ?
Kind Regards,
Jeg P.

Hi,
You can try this way. On insertion of any record in a table trigger a Stored Procedure which will call the url for activating and deactivating the channel. For more help on invoking the url from Stored procedure, please refer to the link below.
http://www.lorentzcenter.nl/awcourse/oracle/appdev.920/a96612/u_http.htm#1012294
Your code will look something like this
req := utl_http.begin_request('http://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action ');
Thanks
Amit

Manually trigger PO Creation for a SC

Similar Messages

Maybe you are looking for