Manually Updating my coverage area

Hi, I just updated my vzaccess successfully, but once I start running it, it reminds me that a area coverage update is available. Every time I tell it to update, it always comes back update failed. I notice that the connection constantly switches from 1x to Mobil Broadband (EV-Rev A). When it's on 1X, its slower than molasses in January. We have 3 Droid 2's and my DroidX and 95% of the time we pull in 3G, why wont the mifi update and stay connected to the high speed?  It has been forever since I was able to successfully update the Area Coverage. I know for a while Verizon pushed through a hybrid PRL that I think made it connect to a Alltel tower or something. But 6 month later or so they said it was OK to go through the activation process that everything is hybrid. After several attempts, I was able to get it to update. But that was like a year ago. Is there someway I can manually update the PRL or coverage area manually. I live in Wyocena, WI if that will help me get the right PRL. Thanks, Jammindog

Nevermind! I got it!

Similar Messages

  • Unable to update the coverage area information on the device.    USB 760

    Hi all,
    I am a new user of the USB760.  Overall the device has been working very well.
    I do get the error shown in the subject line though.
    Can anyone offer any suggestions?
    thanks !

    Hi.  I understand you have questions regarding your broadband device and I can certainly look into this for you.   Where do you receive this error message?   Does this happen when you are trying to connect or do you receive the error when you are already connected.
    Waiting on your reply,
    Thanks!

  • My Thunderbolt will not update it's coverage area

    I live in Gracey, KY and when traveling to Russellville, KY and Bowling Green, KY my phone will not send/receive text/voice but will receive data.  I was told to press *228 with the first SIM card to update the coverage area, but later told *228 will damage the SIM card and haven't done it with the second SIM card.  I still will not update its coverage area.  I have been through two SIM cards and my phone will still not update.  Bowling Green in a 4G area for sure, I am unsure about Russellville, but I will be traveling to both regularly and need coverage.

    You are absolutely correct by NOT dialing *228 from your 4G device.
    First, make sure your Thunderbolt is set to the correct network settings. (CDMA/LTE)
    Next, ensure you have the latest software which was last updated 10/25/11 to:
    Build Number: 2.11.605.5; Baseband: 1.48.00.0906w_1, 0.01.78.0906w_2
    Lastly, you can also check the 4G coverage for Russelville here. Is the area you travel to in a 4G/LTE area?
    You mentioned that you have had two (2) replacement SIM cards already but have we ever replaced your device?
    Tamara H.
    Follow us on Twitter @VZWSupport

  • I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    Are you leaving the box unchecked to Manually manage music & videos? You don't need to to add anything to the iPhone.
    Simply drag the playlist to the iPhone to manually add it.

  • Manual update - how do I add album art to songs that are already in ipod?

    I recently changed to manual update as the auto update started to take a ridiculously long time to even recognize my 60gb.
    I wanted to add album art to an album that was already in my ipod. I updated the songs in itunes, and then dragged them to the ipod when it was listed in itunes.
    Itunes said "updating songs" - and I ended up with two copies of each song.
    I deleted the duplicates from the ipod, but surely there must be an easier way.
    So how does one properly update information on existing songs with manual update?
    60gb video     latest itunes

    The easiest way to do this kind of thing probably would be to either make the alterations (album artwork, lyrics, etc.) on your iPod's songs themselves, not the iTunes library songs. (Click on the little arrow to the left of your iPod's name in the Source List of iTunes, so show/hide. Click on the "Music" library under your iPod to see it's songs displayed in iTunes.)
    When you've gotten in the "Music" library, under your iPod's name in iTunes, you can select the songs here that you want to change, and click on "Get Info".
    Or, you could do this:
    1 - Make the changes to the iTunes Library songs.
    2 - Go to your iPod's Music area in iTunes.
    3 - Delete the current songs off your iPod that will be replaced with the "modified" version of the track (that has additional or altered info on it.)
    4 - Now, go back to the iTunes Library. Select those new changed songs, and drag them to your iPod.
    -Kylene

  • This is a question for all my adobe applications in the CS6 suite. How do i manually update them? I have not gotten any updates in about 6 months and they are running really slow. I really think this is the issue. How can i do this?

    I am a full sail university film student and I need all my adobe applications running strong. Everything is running slow and sluggish. I think this might be the issue. Does anyone know how to manually update the adobe Cs6?

    What does your computer's sluggishness have to do with any potentially missing updates? That's pretty much nonsense. The last AE update was the 11.0.4 one from November, anyway, and it's only relevant for Mac people more or less. Whatever issues you have have nothing to do with that but rather poor system configuration and maintenance - fragmented cache disks, disks almost full with temp files, too many other processes/ programs running and gobbling up resources, aggressive external tools like virus scanners blocking access to files and functions and so on. Really, you are completely looking in the wrong place. Bring your computer up to speed and AE will run a lot better.
    Mylenium

  • How do I automate the Adobe Reader updates? The manual updates are a hassle.

    How do I automate the Adobe Reader updates? The manual updates are a hassle.

    My Reader is for a Mac and has only these options:

  • I successfully unlocked my iPhone 4S (AT&T, iOS 7.0.2) and many apps are missing. Went to app store and updated all apps. If I manually update a single app it will show up. Solution to get all apps back in place?

    I successfully unlocked my iPhone 4S (AT&T, iOS 7.0.2) and many apps are missing. Went to app store and updated all apps. If I manually update a single app it will show up. Solution to get all apps back in place?

    Hi downeyjdm,
    Welcome to the Support Communities!
    To resolve this issue, I would suggest updating your iOS to the latest version, which is 7.0.3.
    iOS 7.0.3
    http://support.apple.com/kb/DL1691
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If your purchased apps are still not appearing on the iPhone, you can redownload them:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Cheers,
    Judy

  • I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Using a second computer with an ipod set to manual update

    I want to prevent my ipod 60GB video which is set to manual update on my G5 from being updated when I plug it into my powerbook. The powerbook assumes the ipod is available for auto update. How do I mount the iPod without iTunes automatically replacing its contents. I can't "preset" iTunes in its preferences to treat the iPod as a manual drive as it just says: "no iPod connected. As soon as I attach the iPod the auto update starts. Are there keystrokes to interrupt the update so I can set the iPod preferences on my Powerbook?
    Thanks
    Paul
    G5 Dual 2Ghz   Mac OS X (10.4.5)   iPod 60GB

    Hold down the ⌥ and ⌘ keys while connecting your iPod. Keep them down until iTunes has opened and your iPod shows in the Source list.

  • Go from manually update to auto-update without losing songs?

    I was trying to delete some podcasts from my ipod, and was following the directions on the help menu which told me to go to preferences and choose manual update, then delete. I tried it, and it didn't work. When I decided to go back to auto update, I received a message that everything on my ipod would be deleted and the update would be just what is on the itunes on that machine. I have more than one computer, and have itunes on each one. There are different songs on each computer. If I go to manually update on this computer, it will erase the songs I've put on from other computers. All this and I still have the unwanted podcasts. Can anyone help me to go back to auto-update without losing songs? If worse comes to worst I guess I'll have to update, lose the songs, and then re-update at my other computers. thanks.

    Afraid that's not possible. If you go to auto-update, the iPod gets cleared and replaced with the current contents of the iTunes library.

  • Change logs not working for manual update modify/delete statements.

    Hi experts,
                     My requirement is to display the change logs for a few custom z tables.The log data changes is selected in technical settings of the table.When any changes are made to the table using sm30 the changes are logged.
    My requirement also displays an alv grid which allows the users to edit/insert/delete   entries in the table.
    In this case the change logs are not getting recorded(ie whenever the user manually updates or inserts a row into the table the change docs are not getting stored).
    My code works like this,
    Whenever the user chooses a custom table and selects the display change log button i transter the control of my abap program to the standard  rsvtprot program(sap std. pgm to display change logs).
    sample code:
    elseif sscrfields-ucomm eq c_chgdoc.
        refresh:r_seltab.
        clear:r_seltab.
        r_seltab-sign   = 'I'.
        r_seltab-option = 'EQ'.
        r_seltab-low      = w_tab.
        append r_seltab.
    Call the sap standard program rsvtprot via selection screen
    by passing the table name and display grid parameters.
        submit rsvtprot via selection-screen
                          with cusobj   in r_seltab
                          with alv_grid eq c_x
                          and return.
    Is there any way by which i can extend the change logs functionality for the changes made using the alv grid?
    Please help me out.

    Hi Anuraag,
    In TM you should open the transaction /SCMTMS/ZONE. Here you select the zone you would like to modify and you execute the changes you would like to make.
    Regards,
    Nico.

  • Need manual updates for 9.2 and 9.55 to do clean reinstall of acrobat 9.0 pro from cd

    I just did a new nstallation of acrobat V9.0 professional from CD:
    I need a link to the master incremental update for 9.2 and the master 9.55 incremental update that goes from V9.2 to V9.55
    I am looking for a master baseline release.
    My reinstall is on an old XPSP3 machine. When acrobat professional 9.0 goes away I will still need the incremental update from V9.0 to V9.55
    I do not need to put acrobat X or acrobat XI on this machine. A new acrobat X or acrobat XI license is for a new machine.
    I keep all my master and incremental updates in archival. That way i can rebuild my machine. 
    This is the way it is normally done.
    the autoinstaller jumped me from V9.0 on CD to V9.2 and from V9.2 to V9.55.
    I dont' see master releases in the table that do the same thing.
    there were only 2 updates.
    normally support would just send me a link out-of-band. i understand I need to send the request thru the forum
    many thanks!

    Most of the manual updates are not cummulative. It sounds like you did the updates from the help menu (and many of those are cummulative -- don't know why they are not available). You may be able to find the updates you used on your harddrive -- I have seen them before, but don't remember where, probably the users folder or such.

  • Audit log + manual update + specify download location

    Hi all,
    I'm evaluating whether we can use Java Web Start for our new product, for geographically distributed software deployment.
    I've the following questions that I could not find answers in the official documentation:
    - Can it support manual update? i.e. is there any way I can put a button on the application UI so that instead of checking latest version on every program start, the end-user can manually initiate software update.
    - Can I extend it to support audit log? i.e. we need to keep track of which client upgrade to which version in a centralized database (as audit trail), and when such update occurred. Can we do this?
    - Some of our end-user has no access to local filesystem, they only have access to dedicated shared network drive, can we customize Web Start so that it download and save the new version to a specific location, instead of C:\temp?
    - We have a few jar files for the application. How can we ensure that all jar files are either updated, or not updated at all? i.e. kind of transaction concept.
    - One of the jar files contains some configuration files, which need to be expanded in exploded format (to allow runtime change of configuration options). How can we do that?
    Thanks a million.

    Hi all,
    I'm evaluating whether we can use Java Web Start for
    our new product, for geographically distributed
    software deployment.
    I've the following questions that I could not find
    answers in the official documentation:
    - Can it support manual update? i.e. is there any
    way I can put a button on the application UI so that
    instead of checking latest version on every program
    start, the end-user can manually initiate software
    update.currently, no - this is a requested feature being considered for 6.0
    >
    - Can I extend it to support audit log? i.e. we need
    to keep track of which client upgrade to which
    version in a centralized database (as audit trail),
    and when such update occurred. Can we do this?only by controling a servlet or jsp page that generates the jnlp file and keeps track of what requests are made for the jnlp file and the resources of the app. Java Web Start itself runs on the client machine.
    >
    - Some of our end-user has no access to local
    filesystem, they only have access to dedicated shared
    network drive, can we customize Web Start so that it
    download and save the new version to a specific
    location, instead of C:\temp?webstart itself only downloads into its own cache (by default on windows XP at c:\Doccuments and settings\<user name>\Application Data\Sun\java\deployment\cache\javaws
    this cache location can be configured.
    in version 6.0 we will have capability to disable caching, but curent version must have a cache.
    >
    - We have a few jar files for the application. How
    can we ensure that all jar files are either updated,
    or not updated at all? i.e. kind of transaction
    concept.
    Java web Start currently checks timestamps of all downloaded jars before launching application, and will only update all or none.
    - One of the jar files contains some configuration
    files, which need to be expanded in exploded format
    (to allow runtime change of configuration options).
    How can we do that?If you must access these resources as files, you will have to extract them using ClassLoader.getresourceAsStream(), and then write them to disk yourself.
    >
    Thanks a million./Andy

  • How do I set iTunes to manually update songs without connecting iPod first?

    Hi. I just got a new computer and downloaded iTunes. The User Guide says that when you connect the iPod, iTunes automatically updates all songs in your iTunes and deletes songs that are not in iTunes. As far as I can see by reading the User's Guide, iPod has to be connected to change the setting to "manual update". I already have an iPod with songs in it that are not on the iTunes that I just downloaded. I'm afraid that if I connect my iPod, it will erase the songs already in my iPod because of the default "automatic update" setting. Does anyone know how I can change the setting to "manual update" BEFORE I connect the iPod to the computer?
    Thanks for your help!
    Phil Hess

    there are some other ways, please read if you are interested
    http://discussions.apple.com/thread.jspa?messageID=1345931&#1345931

Maybe you are looking for