Manufactured Item is not hitting the RG1 register

Hi,
In india localization, Manufactured Items to hit RG1 register..
But in our case it is not happening ( All localization setups are defined for the warehouse in Discrete inventory)
Can anyone help me in this regard..
Regards,
Navanethan

hi
To my knowledge in the current release Production batch is supported only for OSP transaction and Only 'MOVE IMMEDIATE', 'ADJUST IMMEDIATE' and 'CREATE IMMEDIATE' transactions are supported for RG updates.
As per excise laws it needs to have all the finished goods produced into RG1 therefore when we book production quantity for finished goods system should update RG1 also.
In the current system when booking production quantity ,RG1 register not getting updated and system should call the same trigger which is being used for move immediate,adjust immediate etc.
U need to raise an SR
Thanks
Raj

Similar Messages

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Values not Appearing in RG1 Register

Dear All,
When I take a print out of the RG1 Register following coloumns are coming blank pls advice what needs to be done.
1) On Payment of duty
    Quantity
    Value
2) Without Payment of Duty
    For Export
    To other factories
    For Other Purpose
3) Duty
    BED Rate
    BED
    ECS
    SECS
4) Closing Balance
    Others
Please advice what needs to be done to rectify the error.
Best Regards
Atul Keshav

Hi
   The values in RG1 register will flow only if your J_IEXCHDTL (excise item details table) table EXBAS (excise base value) should be updated. If this is not updated then system will not bring the excise values in RG1 register.
In order to ensure that J_1IEXCHDTL table EXBAS field is updated please mark you pricing condition conditon category as "H'-Basic Price in V/06. By this EXBAS field will be updated with excise base value.
Please note that for already created document system will not update this value.
Regards
MBS

Updating the RG1 register.

Hi..Gurus,
Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
Then we do delivery and billing and excise invoice.
After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
After that iam doing RG1 updation ,Extraction.
My question is is my process is correct or not? if we follow the process any problems come in the future.
Gurus please correct me.
regards,
jyothi.

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

SSRS,MDX- Passed parameters are not hitting the main query in Dataset

I have created a SSRS report which has to accept two parameters i.e., store name, Date(to show sales on particular date) in report. which are working fine for me. but, those passed parameters are not hitting the main query in main Dataset. what ever i
pass in parameters, it is displaying all the rows(every city values). i think i am not correct in creating the statement in Main dataset query, to receive those 2 parameters into the main query. can anybody please help me how to create the statement
in main date set to display the results for the exact parameter i am passing(which has to be in MDX).
ram

Hi ramprasad74,
According to your description, you want to use parameter in the report, then after parameter values are selected, corresponding data will be displayed in the report. But the parameters do not work and all the rows are displayed.
To pass parameter to main report dataset, we need to define parameter for MDX query and assign parameter name same as SSRS report parameter. For detail information, please refer to the following steps:
Create a Dataset to retrieve data for Store name parameter.
Create Store name parameter, type name and prompt, set Date type to Text, check Allow multiple values check box, then select get values from the dataset.
Create a Dataset for Date parameter.
Create Date parameter, type name and prompt, set Date type to Date/Time, then select get values from the dataset.
Create a new dataset used to retrieve data for the report, add statement like below to the mdx query: {STRTOMEMBER(@Date)} * {STRTOSET (@Store_name)}.
In Query Designer pane, click Query Parameters and assign parameter name same as SSRS report parameter.
For more information about SSRS Report with Single and Multi Selection Parameter using MDX Query, please refer to the following blog:
http://www.codeproject.com/Articles/799265/SSRS-Report-with-Single-and-Multi-Selection-Parame
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Rebate settlements should not hit the VAT account

Hello everyone,
There is a question on Rebate Settlement.
There is a customer who is entitled to a 15% BPR rebate.
We are accruing for this rebate successfully
The issue we are having is that the materials that this customer buy from us attract 20% VAT but when the customer claims back from us they do not claim the VAT component.
We need to be able to do rebate settlements that do not hit the VAT account.
I ran a test in SAP on a sample rebate agreement but the only way I could get the rebate settlement to not hit a VAT account was to change a material to be not liable for tax and then settle against that material.
Billing doc 1-Posts to VAT since the material is Tax inclusive
Billing doc 2-Does not posts to VAT since the material is Tax exclusive
Any of you aware of any other way to do this (perhaps using a payment type)??
Kindly suggest,
Regards
Manjunath

Hi Manjunath,
As Brian already explained the way how usually rebate settlements happen with settlement or dummy material.
Is our business needs to have settlement against actual materials billed ?
If yes, we did an approach in our client.
we have a six document concept which is custom developed.
You have 2 documents created for rebate settlement run. Rebate credit memo request and rebate credit memo for settlement or dummy material maintained in rebate agreement.
These two documents gets cancelled with corresponding cancellation documents.
New set of documents created for Rebate credit memo request and rebate credit memo with actual materials.
All of these documents are created using a batchjob and these documents form document flow in our case.
You can try with help of an ABAPer for achieving this.
Thanks
Rama

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

I am getting a msg that pllocked and connected to wifi. I can not hit the ok button and my apps are visible. Not able to use at all.

I am getting a msg that my ipad hasnt been backed up in 2 wks. I have plugged in (at 100%) and locked and connected to wifi. I can not hit the ok button and my apps are showing in the back ground. Not able to use at all. How can I get my ipad working again.
thanks,

Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Why is Safari opening the app store when I do not hit the link?(On iPad)

Why is Safari opening the app store when I do not hit the link?(On iPad)

Well this was my first time using the support communities app on the web so when I tried to get the answer there were literally 1000's of post and I was not sure which one pertained to me and my iPhone issue. Sorry if I offended in some manner, didn't mean to.

How to Find the Queries that are not hitting the indexes..

Guys,
Hope you all doin well.
Would you guys please tell me any view , or any resource that can help me to identify those SQL Statements that are not hitting the indexes properly, Causing the system to slow down at peak times.
Thanks
Rgrds
Y.Vo.

any resource that can help me to identify those SQL Statements that are not hitting the indexes properlyInteresting ! Is there any specific reason of looking only for those queries, which are not making proper use of indexes.
hare krishna
Alok

Excise duties values not appearing in the RG1 register

Dear All
After updation of RG1 register and extraction of the same on checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
Please guide in this matter.
deepti

hi,
once again check
1.Tcode: J1id
2.Tcode:J1iex
here see part1 created or not check it.
3. Tcode:J1i5 update register
4. Check condi.types for SH
is not fine pls revert back
regards
ka

Account are not hitting the sepearte G/ l accounts

Hi
we are working with account assigned Purchase order ( P) projects where the system is picking the G/L account thru valution class from the OBYC and we are giving the WBS element.In my PO we have different conditions for base price , frieght and others.
my goods reciept is nonvaluated and when i doing the invoice my conditons are appearing as seperate line items but the account is same as what is in PO.
My requirement is that i wanna to post Material cost and fright to sepearte G/L acount .
To me it seems that it should to that G/L account.
I wanna to post material cost and freight cost to sepearte ..........
Please suggest me how i should move so that my requirement can be meet.
Thanks and regards
Dhar

Thanks for your reply
See i tried to make PO for account assignment category K where i have to keen in the Cost center and if i do invoice for this PO then it is hitting the G/L account i want .But this is not the case when i make PO for account assignment P i.e is project where the system auto matically pickes the G/L account from the( valution class-Material & obyc setting).i have to assign the WBS element .When i am giving the G/L account here at the time of PO then how it is possible to Post the material cost and Frieght seperately to different G/l account.
regards

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01

Hello,
We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
Many thanks.
François.

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

My sent items are not in the sent folder

I went to Preferences and chose to have sent items in the folder but they are not there. Anyone have any suggestions?

Looking at the .mac mail folder, there are no black triangles, I have inbox, drafts and sent (and trash) icons.
I tested the .mac mail (I know I keep saying "this site" but I don't know what else to call it?), and using this one it does keep a copy of the sent items. BUT using the Mail (the stamp icon mail) copies of sent items are not saved.
I want to use the Mail one, because you can choose fonts and all that other stuff, which is why I even purchased the year membership! (otherwise I would just stay with Yahoo mail).
I really don't have a clue about this stuff and I appreciate you taking your time here.

Manufactured Item is not hitting the RG1 register

Similar Messages

Maybe you are looking for