Manufacturer & Country of origin is not copied in Inforecord

Hi,
I am trying to create inforecord automatically from a contract of MPN material by selecting infoupdate as "B". All the fields are copied to the inforecord but the Manufacturer (MFRNR) & Country of origin (URZLA) are not copied to the inforecord.  When i am creating inforecord manually (using ME11) both the fields are copied in the inforecord of MPN material.
Kindly throw some light what might be the problem.
Regards,
Mohit Sehgal

Hi Charlie,
Thanks for your note, but to my surprise all the fields from the contract are copied to the PIR such as Incoterms, Reminder1, 2 & 3, Shipping instructions, tax code etc etc. but these two only remain missed out.
Regards,
Mohit

Similar Messages

  • Country of origin not valid; country of origin is not allowed or does not exist

    Dear Expert,
    I am using SAP 9.0 PL 09 , its upgraded from 8.82. Now my problem is while updating the Sales quotation and sales order only particular series name it getting the following error with effect from  2009 to till date sales quotations and sales order. I have multiple series name.
    "Country of origin not valid; country of origin is not allowed or does not exist"
    i  have  some addon but if i stop and proceed also the same problem comming. Can any one help me it will be good.
    Thanks in advance.
    Thanks and regards,
    Shamugam V.

    Symptom
    It is not possible to add or update marketing documents if an item has a value in the Country of Origin field. The application displays the following error message: "Country of origin not valid; country of origin is not allowed or does not exist".
    Reproducing the issue
    Prerequisites:
    Your company database is not in the Russia localization or you have not enabled the Intrastat feature that is relevant to EU countries only.
    Scenario:
    1. Create or update an item using the DI API. Specify a value for in the Country of Origin field. (Note that this field is not visible in the application).
    2. Try to create a marketing document (that is, an invoice using this item).
    Actual behavior:
    The document cannot be added and the application displays the following error message "Country of origin not valid; country of origin is not allowed or does not exist".
    Expected behavior:
    The document can be added.
    Cause
    Application error
    Solution
    WORKAROUND:
    Update the affected items using the DI API as follows:
    1.  Run the following query to identify the affected items:
    select CountryOrg, * from oitm where CountryOrg is not null
    2.  In the Country of Origin field, set a blank value.
    SAP intends to provide a patch or patches in order to solve the problem described. The section Reference to Related Notes below will list the specific patches once they become available.
    The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number. Be aware that these references can only be set at patch release date.
    SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
    Other terms
    country of origin, DI API, marketing documents

  • Country of origin is not printing in Export Commercial Invoice for US

    Dear Abapers,
    I am using the standard form to print  export commercial invoice. I am using the output type   FUCI.  In that country of Origin and country of final destination is not printing in the form. The structure V55ENAFT has the field URSPR_HEADER for Country of origin and  BESTI for Country of destination.  What I have to do get populate the values for those fields.
    Thanks & regards,
    Jagadeesh T.

    hi,
    You may try creating /updating equipment data without entering the country of origin. Since this field in asset master might have been disabled, system will not allow to save data.
    James Prabaharan

  • Purchasing info record: country of origin copied from Basic Data View

    How/where can I make sure that the Country of Origin from the Material Mastewr Data is ALWAYS copied into a purchasing info record for that same material?

    Hi,
       As of my knowledge, the country of origin will be copied to po from  material master and the same is copied from po to invoice. So in your case, in invoice, it will be copied from po only, that is DE will come in invoice.
      Please check the following note for better understanding:
    Note 481600 - FAQ: Import data in purchasing
    Note 418707 - Info record: Country of origin automatically filled
    Please check the link too: http://help.sap.com/saphelp_erp60/helpdata/en/8b/2ae341bd955f24e10000000a1550b0/content.htm
    Hope its clear and helpful.
    Regards,
    AKPT

  • BAPI to Update Country of Origin for Delivery Item

    Hello All,
    I have a requirement as follows.
    For an Outbound delivery item (VL02N), I need to update the 'Country of Origin' (EIPO-HERKL). This will come in 'Origin/Destination/Business' tab under 'Foreign Trade /Customs' tab for the delivery item. Could anyone please tell me if there is
    a BAPI to do the same.
    I think this country of origin is not the country of origin for the material, because even if the material is having a value for country of origin in material master, the same is not reflecting in the delivery.
    Thanks and Regards
    Indrajit

    Hi,
    Try using the FM ''EXPIMP_POSTING".
    Refer to the sample code.
    PARAMETERS p_deliv TYPE vbeln.
    DATA: lt_xeikp TYPE STANDARD TABLE OF eikpvb,
          lt_xeipo TYPE STANDARD TABLE OF eipovb,
          lx_xeikp TYPE eikpvb,
          lx_xeipo TYPE eipovb,
          lv_exnum TYPE exnum.
    SELECT SINGLE exnum
           FROM likp
           INTO lv_exnum
           WHERE vbeln = p_deliv.
    lx_xeikp-exnum = lv_exnum.
    APPEND lx_xeikp TO lt_xeikp.
    lx_xeipo-exnum = lv_exnum.
    lx_xeipo-expos = '000010'.
    lx_xeipo-herkl = 'US'.
    lx_xeipo-updkz = 'U'.
    APPEND lx_xeipo TO lt_xeipo.
    CALL FUNCTION 'EXPIMP_POSTING' IN UPDATE TASK
      TABLES
        fxeikp = lt_xeikp
        fxeipo = lt_xeipo.
    COMMIT WORK.
    Thanks,
    Indrajit

  • How is the Country of Origin field populated in the OITM?

    Dear All,
    I can see this column in the table but not in User interface. We are in CA and US localization. Thanks a lot.
    Regards,
    Yuka

    Hi,
    The country of origin does not appear on the interface but is available on the backhand ie. tables.
    If the field is a requirement you can check the following workaround in the test enviorment :
    - create udt for the countries
    - create udf on item masterdata -> set udt as linked table
    - create udf on Marketing Documents Row-level -> set udt as linked
                                                    table as well!
    - save following query and attach as formatted search to udf
    - on Marketing Documents Row-level:
    - SELECT udf FROM OITM WHERE ItemCode= $[$38.1.0] FOR BROWSE
    - set to autorefresh on "when existing altered column", Item No.
      in documenttemplate choose as Datafield
      File:  UDT
      Field: Name
      tick "Display Description"
    Check if the above helps.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • Country key INR is not defined after client copy

    Dear All,
    I'm doing a client copy in my solution manager system.
    Target Client         100
    Source Client        000
    Copy Type           Local Copy
    Profile                 SAP_CUST
    Status                 Successfully Completed
    User                    SAP*
    The log from SCC3 shows that the copy is successful. However, when I'm logged in to client 100 (new client), I have problem assigning the profiles to the user.
    In SU01, when i was assigned the profile (SAP_ALL) to the user, the message says that "Profile SAP_ALL does not exist or is not active".
    so I have use SU21 and reactivate SAP_ALL profile, then SAP_ALL assinged sucessfully
    But when i try to assine SAP_NEW profile to user, message says that "Profile SAP_NEW does not exist or is not active".
    However, when i try creating a new user in SU01, a message box prompted out an warning "Inconsistency with address" and "No default co. address has been maint. in the system. Create an address". When i try to create the address, the entry for "country" does not have any choices and values. If I fill in my entry, the system displayed "country key XXX is not defined"
    Did do something wrong here? Please suggest how to correct this issue
    Regards,
    Ajay

    Dear Mr  karthikeyan,.
    Thanks for your helpful answer.
    As per note 1711620 - use of SAP_NEW is not required for every version change project, no automatic generation takes place
    So its mean that SAP_NEW profile is not required now?
    and as per note 1164216, i have mentioned entries of country code in table T005 and its work.
    Time zone INDIA does not exist-  for that i use the note 198411 and its also work.
    But "Company address could not be created" could you please help[ in this
    Regards,
    Ajay

  • HERKL (country of origin) not updated during material master upload

    Hi all,
    I  have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
    where few ariund 800 records are not updated with HERKL( Country Of Origin).......
    Could you please help on the above query.
    Regards
    Jagadeeshwar B
    Moderator message: subject corrected, please use a more descriptive one next time.
    Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

    Have you analyzed what is common to the errors?
    is it the countries that are used in this cases?
    or is it a certain material type?
    do you have any succesfull update with a country that is among the failed ?
    Have you tried manually to enter this field  in MM02 for such a material?
    we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

  • HT1349 My country is not mentioned on the country of origin drop down list

    Good evening. My country is not mentioned on the drop down list. So I cannot choose a country of origin. I live in St Maarten which was the former NETHERLANDS ANTILLES. AND SECOND WHAT DO I HAVE TO PUT AS ITUNES CODE WHILE REGISTERING MT CREDIT CARD. I PUT MY USA MAILING ADRESS.
    Do you read me
    <Re-Titled By Host>

    If the app store is not available in your country, you cannot download apps at this time.

  • DELVRY03, Idoc is not updating country of origin field

    Hi,
    I am using DELVRY03 IDOC type for my inbound IDOC, I need to update Country of origin field in delivery ata item level. Using message type SHPCON , there is a segment to hold this value
    E1EDL35-HERKL, but it is not updating this value in the delivery.
    Anyone have any idea, please reply me
    Regards
    Vijay

    Hi,
       Try with FM
    CALL FUNCTION 'DB_COMMIT'.
    CALL FUNCTION 'DEQUEUE_ALL'.
    Thanks,
    Asit Purbey.

  • Hi, I am working in saudi arabia and willing to buy an iphone 5. But next year I will shift to India permanently. So my query is whether I would purchase apple applications from India or not once I left the purchased country of origin?

    Hi, I am working in saudi arabia and willing to buy an iphone 5. But next year I will shift to India permanently. So my query is whether I would purchase apple applications from India or not once I left the purchased country of origin?
           Also here though face time is banned by law, one of the biggest authorized dealer (Jarir bookstore) of apple products sells unloced iphone/ipad versions with face time enabled. So shall I use this function out side of saudi arabia, i.e. in India?

    Wait and purchase the whole phone from India if you are going to be permanently based there.  There are no usage restrictions in the same way that there are in Saudi.
    Just wait.

  • HT4623 Trying to iMessage someone from Australia to UK will not send message to iPhone number why as my contacts has the country of origin for each contact??

    Why can't I iMessage someone in the UK from Australia using their iPhone number! my contacts has country of origin but it won't deliver the message?

    Nops, no Jailbreak. And I can't even really find people with tha same issue over the web. I'm starting to think that a fresh install might be the only way to solve this. Which ***** (and at the same time might be related to the problem), since I've been restoring my iPhone data since my 3GS. I'll keep pooking for a solution to avoid a fresh install, though. Not ready to lose my entire sms/imessage history and my games progress over this. Heh

  • Will Not Copy After Being Idle

    THIS IS A COPYING ISSUE!!!  After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print.  I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem.  Consequently, we purchased a new HP 5740 printer  The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work.  If you then turned the printer off and immediately turned it back on, it would copy.  Again, Comcast reiterated it was a printer problem.   I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer.  After hooking up the second HP 5740, the same problems with copying occurred.  I returned the second HP 5740 to the dealer for a refund and left town for three months.  We recently returned and purchased a HP ENVY 7645 printer from another dealer.  We are having the same issues with this printer as we had with the two previous HP 5740 printers.  I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician.  The installation occurred today and we are still experiencing exactly the same problem.  The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy.   He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem.  DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

    Hi @lamoso,
    Welcome to the HP Forums!
    I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
    I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
    Let's see what happens after giving these two steps a try!
    Thank you for posting!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Country of origin field?

    Dear Gurus,
    can we make only 'country of origin' field manadatory in me11 and me12?
    if yes, how?
    If No, why?
    pls help........

    Dear
    Field Ctry Of Origin gets copied from Vendor Master - In Address LFA1-LAND1. Further it is independent of the Partner Function. Even u assign any different Goods Supplier/ Ordering Address in partner determination, it will not not pick-up from its country.
    Hopes this help you.
    Cheers
    Sunil

Maybe you are looking for