Manufacturer name not appearing RFQ Print

Hi,
How can we put the Manufacturer name in an RFQ so that can be seen in the printout of RFQ
Regards,
Aritra

Assume this Print out put is Customised one.
You can give the Manufacturer name in Text field
By selecting Item then going to Item > texts > Item Overview from their you can populate.
Or else you can use fields Reference data.
But for all you need to discuss with technical Consultant.

Similar Messages

Word styles not appearing in Print Document Appearance dialog

My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
Thanks again,
John

Peter,
I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
John
From: Peter Grainge [email protected]
Sent: Thursday, October 13, 2011 8:47 AM
To: John Dawson
Subject: Word styles not appearing in Print Document Appearance dialog
Re: Word styles not appearing in Print Document Appearance dialog
created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

Vendor ref. no. not appearing in print preview of vendor aging report

Dear all,
Vendor reference number is not appearing in print preview of vendor ageing report,we have
customized template AGE3 collection report,we have taken print outs before a month,vendor
reference number get printed in report,now it is not appearing
What could be problem ?
Any one faces this issue ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 41.
Latest patch upgrade to PL:46 will solve the issue ?
Jeyakanthan

hi all,
Thru a workaround i brought up vendor reference number in print preview/print,
Applied formatted search in journal remarks of ap invoice thru query
SELECT $[OPCH.NumAtCard]
,this will populate vendor ref. no in journal remarks
which can be displayed in details in aging report.
Is there any solution other than above to bring vendor reference number in print ?
Jeyakanthan

Epson r800 prints, but does not appear in Printer List: can't use Utilities

My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)

For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

InDesign Book Project...some images/graphics not appearing in print-ready PDF

Some images/graphics not appearing in print-ready PDF. Why? and how to fix.
The images are linked.

That didn't work, but i copied images from other parts of my document that did work and pasted/resized to replace images that didn't import and that seemed to work.
still wish i could figure out why it happens in the first place so i don't have to do this other process.

Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

Full qualified host name not appearing in url within WSDL generated from PI

Hi
We are on PI711 ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file generated in PI71 for a webservice it exposes using the Integration builder
We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

HI Karthik,
As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
the URL format is fix. and it is simple.
http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
in above URL provide your sender service component name instead of sender system.
and provide SOAP sender communication channel name in place of CC_sender
provide your PI system host and http name in place of host and https and use this..
for more details about URL..
Propose URL when Configuring Sender SOAP Adpater
soap url
Thanks,
Bhupesh

(Continuity) Caller Id name not appearing in mac

Hi every body
I face problem with some calls, the Caller Id name sometimes not appearing in incoming call for mac (Continuity) only numbers.
Please note that all the calls i get it has name in my contacts and it's already in iPhone and mac contacts app.
Any ideas how to fix it.

Thanks for all your reply,
I found that we have Avaya Definity System with S8700 & found configuration documentation :
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/410364av.pdf
What I found that Avaya side is configured for Qsig ; Basic Supplementary Services is not enabled (System Parameter & Customer options) .
I also found this document ( http://www.svcc.cc.il.us/UserMenu/employees/telephone/images/buttons.pdf Page 362) about Supplementary Service protocol value which most likely change which Qsig Avaya side use.
Once again thank you all , will let you know if things work .

Event name not appearing in calendar

We currently have Novell Groupwise 8 as our email system and we are syncing with the iPad by using the Microsoft Exchange, when creating a new event, the event name does not appear on the calendar?? Event names for previously created events are showing but not a newly created event. On the calendar, the start time of the event shows but not the event name, it appears as a "New Event" not what has been listed in the subject line when the event is created. It is not consistent and I can't figure out what is causing the problem...

this is even weirder - when I backed out of the forum page and re-entered the discussion via the pulldown menu on the left hand side of the support homepage (iCal/then discussion forums link next to the iCal icon), the post message link appears. Coming into the discussions via the support link on the apple homepage, then discussions link under the Mac graphic, doesn't allow me to post....

Artist name not appearing in list

I received a new Ipod Classic 160GB for Christmas. I have transferred some CD's to it and some of the names of the artists are not appearing in the list of names. The albums are there - is there any way to get these to display? Thanks!

... and as well as the helpful answers provided by planb77 and Jeff there is another little trick you could try.
Remove the Compilations heading from the *Main Menu* of your iPod. This will then cause all the artists who only appear on compilation albums to appear on the iPod/music/Artists* list.
To remove the Compilations heading, go to *Settings/Main Menu* and make sure Compilations does not have a tick next to it.
Phil

Name not appearing in Dynamic Stamps

Hi.
When I insert a dynamic stamp, such as reviewed,approved etc, into a pdf my name does not appear as the reviewer/approver.
I am using Adobe pro9 and Windows 7.
Thanks.

Is your copy of Acrobat up to date with version updates?
The current version is 9.5.1.
Have you turned off JavaScript in Acrobat?
Did you create the dynamic stamp?
Have you completed "Identity" category in Acrobat's Preferences?
Do the Dynamic stamps supplied by Adobe work?
What is the code you are using to insert your name?
The code supplied by Adobe for their Dynamic stamps:
event.value = (new Date()).toString();
AFDate_FormatEx("h:MM tt, mmm dd, yyyy");
event.value = "By " + ((!identity.name || identity.loginName != (event.source.source || this).Collab.user) ? (event.source.source || this).Collab.user : identity.name)
+ " at " + event.value;

MacOSX (10.9): Print dialogue box does not appear when printing PDF's

Hi there,
I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
Environment Details:
Device type: MacBook Pro
OSX: 10.9 (Mavericks)
Adobe Reader version: 11.0.06
Details:
After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
- Only 1 MacBook Pro affected
- The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
- Multiple restarts performed
- Attempted to download older versions with no success
- Attempted multiple uninstall/reinstalls
- Reset the CUPS printing system multiple times
- Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
- Occurs for multiple PDF's from various sources
-> Online source
-> Converted from Word
Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
An unimplemented or obsolete function was called
Any help would be greatly appreciated.
Cheers!

Hi there,
Just bumping this thread for more visibility.
If anyone has any thoughts, I'd more than appreciate your advice!
Cheers!

Domain Names Not Appearing In Drop Down of Data Cleansing Task

For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
Has anyone else run into this issue?
Thanks!!
A. M. Robinson

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

Contact names not appearing in texts or when calls recieved

I got off a plane from the UK to the US (this was a return trip, i'm from the US on Verizon) and when I turned my iPhone 4S back on, all of the contact names (who are in my Contacts) disppeared from emails, texts and my phone log. A friend told me to "Import SIM Contacts" but that didn't do anything. I deleted all of my texts hoping that when I sent new texts and recieved calls names would appear, however they still are not. Is there anything I can do other than take it to the Genius Bar?

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

Manufacturer name not appearing RFQ Print

Similar Messages

Maybe you are looking for