Manufacturing programs in SAP 3.1H

Hi...
I tried to find manufacturing program (MP) in SAP 3.1H but cannot find. Is MP is supported in this SAP version? Currently, we are running MP outside SAP.
TQ
henery

Hi,
You can use the IDoc types ORDERS01/ORDERS02 of message type ORDERS to create POs in SAP R/3 3.1H.
regards,
Imran

Similar Messages

  • Purpose of RSTXTRAN program for SAP-Script ?? ??

    Purpose of RSTXTRAN program for SAP-Script ?? ??
    when it is required to run that program ?

    Hi sarit,
    Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
    The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
    When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
    There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
    It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
    When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
    Reasons for failed transfer include
    o the correction/repair is currently being processed
    o the correction/repair does not exist
    For Example
    All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
    o Correction: B20K009999
    o Text object: TEXT
    o Text name: SAPSCRIPT*
    Thanks,
    Usha

  • JCO.Server Error while trying to execute a RFC program from SAP

    Hi,
    We are connecting to an external registered server program from SAP via Web Methods.
    The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
    An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
    We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
    Number - 10
    LUname - dev01
    TPName - sapgw00
    User - KRAORANE
    Status - CONNECTED
    Symbolic - PRDB2B
    Conversation - 86520353
    Prot - REG
    SAP return code - 0
    CPIC rtn code - 0
    The external program returns results as expected.
    However sometimes the RFC fails and returns the message “JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS”.
    We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
    -Kiran

    Hi,
    Please see the below links..
    JCO.Server Error while trying to execute a RFC program from SAP
    Re: JCO.Servcer could not find server function
    Re: JCO.Server could not find server function 'SET_SLD_DATA'
    /people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
    Re: interfacing SAP with an existing java applications
    http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
    http://www.sapgenie.com/faq/jco.htm
    Regards
    Chilla..

  • Can we rename the existing z-program in SAP-abap

    Can we rename the existing z-program in SAP-abap. If yes, than how it can be done. But actually we don't want to copy the code from the existing z-program to the new one which will be created. We just want to make rename the existing z-program in SAP-abap. Please suggest, how it can be?
    Edited by: akg.amit on Oct 20, 2010 7:40 AM

    Hi Amit,
    In SE38 Open the program with old name. Press the RENAME button. In the Target program field provide the new name of program name. This new name for program should not exist in your system. Click on the Rename button. It will give a pop-up where it ask if you want to rename any includes in that program. I assume you dont have any includes in the program. So press the Rename button again without selecting the "Include" check box. Now it will ask for the Transport request. Provide your Transport request number. The program will be renamed.
    Regards,
    Immanuel.

  • What program in SAP SD automatically creates Purchase requisition

    What program in SAP SD automatically creates Purchase requisition, and also please tell me the user exit that we can use to change the delivery address automatically from plant address to ship-to address during purchase requisition creation time...
    Your help will be appreciated.
    Thanks,

    Hi,
    The control to Create the PURCHASE REQUISITION is in the SCHEDULE LINE CATEGORY VOV6
    The Purchase requisition will be created  automatically for the THIRD PARTY and INDIVIDUAL PURCHASE ORDERS
    The field in VOV6 
    ORDER TYPE
    ITEM CATEGORY
    ACCOUNT ASSIGNMENT
    Will determine the  Document type for creating the Purchase requisition
    IFor both THIRD PARTY & INDIVIDUAL PURCHASE ORDER the standard Purchase requsition document type is NB and
    ITEM CATEGORY  5 will determine whether it is  third party or Individual PO.
    Hope it is clear,
    Please revert back if you need more details
    regards,
    santosh

  • Search print program and sap script

    hii , how can i find  trigring print program and sap script  for a particular  purchase order.
            regards  Aditya
    Edited by: aditya shrivastaba on Apr 14, 2008 9:59 AM

    Hey,
    First go with Me22 or 23 with po that you had, and then check with output type for that in the transaction. After that go to TNAPR table and check the corresponding form and print program.
    Or else, go with NAST table in that put PO num in 123456 and put in OBJKY field in nast table. It will give you the output type of it, so that u can find the print program and lay out in TNAPR
    Many thanks,
    Raghu.

  • Logging to SAP 'file:///C:\Program Files\SAP\FrontEnd\SAPgui\saplgpad.exe'.

    Refer to post
    F4 help for a field in SCREEN 100
    Team,
    I am using FM CALL FUNCTION 'SRM_TOOLS_LOG_SENDMAIL'
    I am APPENDING hyperlink 'file:///C:\Program Files\SAP\FrontEnd\SAPgui\saplgpad.exe' to email body using the above FM. In the email the hyperlink is not complete. It appears in two parts and hyperlink ends after Program: I think this is because there is a SPACE between Program and Files
    <b>'file:///C:\Program</b> Files\SAP\FrontEnd\SAPgui\saplgpad.exe'
    How to send the lhyperink that it will appear as a complete hyperlink in email body.
    Thanks

    Hello,
      Try to enclose the URL in "<" and ">" characters if the URL has any spaces in
       it ,so that it doesn't show as a broken link in the mail client.
    Thanks&Regards,
    Siri.

  • How to know print program for SAP Script

    Hi friends,
    how to know print program for SAP Script form name ?

    Hi ,
      You can use the following code changes in the layout & see..
    You have to create a program Z_BC460_EX4_HF for that..
    /:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
    /:  USING &CUST&
    /:  CHANGING &NAME&
    /:ENDPERFORM.
    Dear &NAME&
    The ABAP routine could be defined as follows:
    IMPORTANT: The structure itcsy must be used for the parameters.
    REPORT Z_HENRIKF_SCRIPT_FORM .
      tables scustom.
      form get_name tables in_tab structure itcsy
                           out_tab structure itcsy.
      read table in_tab index 1.
      select single * from scustom
        where id = in_tab-value.
      if sy-subrc = 0.
        read table out_tab index 1.
        move scustom-name to out_tab-value.
        modify out_tab index sy-tabix.
      else.
        read table out_tab index 1.
        move 'No name' to out_tab-value.
        modify out_tab index sy-tabix.
      endif.
    You could also fill the ouput parameter table this way
       READ TABLE out_par WITH KEY 'NAME1'.
       out_par-value = l_name1.
       MODIFY out_par INDEX sy-tabix.
    endform.

  • Manufacturing programming mode is set to unlocked

    Hi All, Have just received a new laptop from HP that came, for some obscure reason we're yet to fathom without the operating system on the disk.
    I've spoken to HP and they're sending out a recovery disk. In the meantime I've installed Windows 8 using my own media. But. When the laptop boots I keep getting this message; "manufacturing programming mode is set to unlocked" Anyone know what this is, what the effect is on the laptop? I've tried updating the BIOS but it still comes up. Also, the 'born on' date within the BIOS is showing as 0/0/0 . Thanks

    Hello, I just got the response from the engineering guys. During their way in the factory, the units are set in MPM (Manufacturing Programming Mode) for all the funtionnal tests. This MPM is then deactivated at the end of the production line.For a small bunch of units (included yours), the MPM deactivation failed. The main issue is that, even if your Win8 key has been embedded in your BIOS, the MPM mode avoids WIndows to access and recognize it. A simple tool has been developped to solve this issue, but is confidential and can only be used by HP repair partners.You may ask why, so I'l explain quickly : this tool is harmless for almost every user, but it can be used by evil-minded persons to create BIOS viruses or hacking stuff. So, I'm sorry to inform you that the only way to get your BIOS in standard mode, and get your Win8 key recognized properly is to send your unit in repair. Regards.

  • How to see my z programs in sap file system

    hello everyone
    my Z programs are deleted due t some server problem from  my  sap ecc 6.0 system  is there any way to  get   my programs from sap file system 
    if yes then  where  exactly in windows folder my zprogramms are stored.......

    >
    elinuk wrote:
    > my Z programs are deleted due t some server problem from  my  sap ecc 6.0 system  is there any way to  get   my programs from sap file system 
    If your Z Programs are present in other server viz., QAS / PROD, then you can import the programs to your DEV server.
    if yes then  where  exactly in windows folder my zprogramms are stored.......
    I am not sure about programs associated to unreleased transport requests (TRs). But when you release your TR, the data gets stored in COFILES & DATAFILES in the transport directory (DIR_TRANS) of the app server.
    Hope this helps.
    BR,
    Suhas

  • Checking existing of program in sap libraray

    I have a field where the user can enter a program name
    I have to check their existence in the sap library and accordingly inform the user.Is there any function module which would check existence of program in sap library?

    hi Priya
    Go through the following link
    http://help.sap.com/saphelp_nw04s/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/frameset.htm
    Hope it will help you.
    Regards
    Sachin

  • Direct Input Programs in SAP

    Hi,
    Can anybody provide me the list of Direct Input programs available in SAP.
    Thanks,
    Sunil.

    hI,
    Direct Input:
    A recent technique to input data safely. An alternative to batch input.
    With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
    SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
    Examples for direct input programs are:
    RFBIBL00 - FI
    RMDATIND - MM
    RVAFSS00 - SD
    RAALTD11 - AM
    RKEVEXTO - CO-PA
    Regards
    Kiran Sure

  • What is print program for sap script?

    some of the print program of sap script.
    and also guide me to use that program

    for which sapscript ?
    you can use table TNAPR to find the print program and layoutset for output types. Maybe it will help you.
    regards,
    Hans

  • Calling Non SAP programe from SAP program

    Hi Experts...
    Can we cal Non SAP programs Like Windows EXE programs from ABAP programs ?
    If yes Then How .....
    Regards ...
    ..Ashish

    Hi Ashish ,
    Ya we can call a non SAP program from SAP program.
    For example we can call a EXE program from the SAP program using the RFC connection created in SM59.
    In Sm 59 you can create a TCP/IP connection and give the path of the executable there.

  • How to create Add-On program for SAP Business One 2007

    Hi,
    When I create my Add-On into SBO I have some issues.
    Which program do I use to create an Add-On into SBO?
    Is there a URL or Path where I find the program?
    I am using a 2003 program which is built by my colleague.
    I assume SAP provide the Add-On program for SAP Business One 2007
    Thank you,
    Rune

    Rune,
    At a high level ...
    1) VS2005
    2) Compile your program
    3) Generate and Add-on Identifier
    4) Create a registration datafile
    5) Create the setup program consisting of your .EXE and the .ARD file
    6) Add-On is created and running in SBO
    Again ... the details on deploying and packaging your add-on can be found in the SAP Business One SDK Help Center Documentation and the SDK eLearning.
    Also, you can use B1DE using the Simple Installer or Professional Installer will do most of the work for you after you have coded the add-on.
    Eddy
    Edited by: Edward Neveux on Jan 30, 2008 9:11 PM

Maybe you are looking for