Many Calendar alerts don't appear

Does anyone have this problem ?
I get alerts from only some of my events in Calendar.  It seems random.  I have one event recurring every day but I only get alerts on some days.  Some events have never popped an alert.  Some events which I imported from an earlier version of iCal pop alerts while others don't.  Similarly, some that I've entered since upgrading to Mavericks pop alerts while others don't.  Sometimes, I don't get an alert after snoozing an earlier alert (eg. snooze 2 days - no alert after two days).  It seems completely random.
When I check Notifications, the old events are missing, as if I've dismissed the alert - but there wasn't one.
I have checked my settings: Notifications Centre has alerts set for Calendar.  Do Not Disturb is off (I do get some alerts but I checked anyway).  There are supposed to be 20 past notifications showing in Notification Centre for Calendar but there are none - all are in the future.
When I open some events, the alert settings don't show if they are the default.  Is that normal ?  Either way, that behaviour doesn't seem to correlate with non-showing of alerts.
What could be causing this random non-appearing of alerts ?
Many thanks.
Garry

Garry, I have the same issue that you've described. So far, I've had no success in debugging it, or in finding a solution online.
I'll keep searching, and if I find some useful info (or better yet, a solution), I'll post it.
Roman

Similar Messages

  • Why do I get so many Calendar alerts for US holiday events?

    All of a sudden for US holidays I get dozens and dozens of the alerts the day before reminding me of them. This does not happen for calendar entries that I have made.This just started this week with Lincoln's birthday and again repeated for Valentine's Day tomorrow. Any suggestions?

    Look Here.... Everything you ever wanted to know about Reminders and then some..... 
    http://support.apple.com/kb/HT4861

  • My calendar alerts don't always pop up.

    Sometimes they do, sometimes they don't. I have tried to not rely on them too much but it would be really nice if they'd just work. Alerts are enabled in General Settings and everything seems fine, but it just doesn't always seem to work. Any ideas of what could be going on?

    maykelbembibre wrote:
    My phone is not associated with any provider, it is free.
    Where did you get the device?
    Even if it was 'free' to you, it is still associated with a provider the minute you place a SIM card inside it.
    maykelbembibre wrote:
     I am so desperated with a phone which does not sound. It is utterly useless! What can I do? if this situation continues, I will be forced to buy another phone! Is there any way in which I can take contact with a person of BlackBerry to make a complaint? In their website I can't find a way to do this. All links redirect to this forum and the persons in this forum are not BlackBerry employees.
    Thank you for your help.
    Are you certain you have a Q5, or perhaps a Q10? Please be specific.
    Read this:  After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be sig...
    So, were your notifications audible before your upgrade to 10.3.1?
    AND, What is your specific Operating System loaded to your device? From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPod calendar events don't appear on computer after sync

    How can I set my Touch so that its calendar events are added to iCal on my MacBook Pro? When I sync through iTunes, nothing on the Touch gets tranferred. Thanks!

    You're welcome

  • Calendar alert snooze does not survive shut-down

    I set many calendar alerts for a day or more in advance. I often snooze them for 2 hours, several times a day, to repeatedly "nag" me and keep the task in the forefront of my leaky brain. In OS X 10.6.8 Snow Leopard, I could snooze an alert for 2 hours at, say, 11 PM, just before shutting down and going to bed. The next morning, that alert would reappear at startup. In 10.9.3 Mavericks, it seems that the snooze expires at 1 AM while my MacBook is shut down overnight, and it does not reappear at startup the next morning. Is this the "new normal"? Thanks.

    I have also submitted feedback to Apple about this, as I think they have rendered Calendar all but useless by stripping out the ability to set sound cues, and to specify the lag time when hitting the "snooze" button. I completely agree, this is a serious and unprofessional messtep to remove a core function as though it were a trivial feature of the software. I've been a loyal Apple consumer for two decades, and this really makes me angry.
    I am hopeful the wonderful people at Apple will restore this function with the next update to the OS.

  • Multiple google calendars synced to my ipad with exchange but the entries don't appear

    I've done this many times before with various iphones, but my new ipad2 vexes me. I want all my google calendars to appear in the calendar app on my ipad. I've:
    set up the google account as an exchange account
    signed in to m/google.com/sync
    selected the correct device
    enabled the calendars
    you can see the complete list of calendars in the the cal app, but the actual events don't appear.
    if i create a new event on one of these invisable calendars, it appears.
    thoughts?

    Can you attach a screenshot?
    * http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
    Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • All day events don't appear on my iPhone Calendar-

    Hi,
    I use iCal and I get all the event synchronized with my iPhone Calendar… except  the all day events that don't appear…
    How can I manage that ?
    Thanks for yourhelp
    Eric

    Or did I make something wrong if my "All day" events don't appear on my iPhone Calendar?

  • HT4489 iTunes sync confirms my calendars are being syncd to iCloud, but they don't appear

    My calendars don't appear in iCloud: what am I doing wrong?, plea

    Got it! I'm editing each entry into a different calendar and they're appearing- job done!!

  • Calendar Reminders for events that don't appear in Calendar

    Hi,
    We have a user who created a number of calendar appointments for a shared Calendar.  He receives reminders for these, but the appointments don't appear in the shared calender (or his calendar) and no other members of his team who have access to the
    calendar receive the reminders.  When the reminder pops up, he can view the appointment and it appears normal - it just doesn't show in the calendar.
    The appointments are very important and we need to somehow restore the corresponding calendar entries so that they're viewable to him and his team, and reminders are recieved by everyone.
    I'm aware of the /cleanreminders switch but can't find anything to allay my fears that these reminders won't be seen as "rogue" and deleted leaving us with no record of the reminders.
    I've used the scanpst tool against the ost files he uses, although I've been advised the scan may need to be run several times so waiting to schedule this in with the user.
    Worst case scenario is that the reminders are accidently deleted and there is no record of these at all, at least at the moment, one person receives these so they're not running completely blind.
    Anyone else had this or have any ideas?
    Thanks,
    Paul

    Hi,
    Outlook.exe /cleanreminders switch will clear and regenerate reminders.
    Does this problem occurred for just one user?
    I suggest the following several methods to check this issue.
    Open outlook with command: outlook.exe /cleanviews, this command will restore default views. All custom views you created are lost.
    Switch outlook to online mode.
    Check in OWA.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support
    Thanks for your replies.  The reservation I have around the /cleanreminders switch is that effectively, the notifications are fine (they appear when they should) - but it's the underlying appointment which isn't showing (unless the reminder pops up
    and you open the item). Will the reminders be regenerated if the actual appointment doesn't appear?  Or will they disappear too?
    Only one user gets these notifications, he created the appointments in the shared calendar.  The notificiations and the appointments don't show in OWA  - I'd expect the same with Outlook in online mode.
    The worst thing to happen is lose all trace of these appointments.
    Kind Regards,
    Paul

  • Calendar alert post-Mavericks installation won't stop chiming

    Installed Mavericks yesterday over Snow Leopard (10.6.8) and have had a host of problems that have paralysed my computer use. As someone who's not particularly tech-savvy and relies on their Mac for their living, this has been a nightmare. The most irritating problem has been that I use the glass chime for my calendar alert. Well, it won't stop ringing--it's like a button's depressed and stuck in that position. Can anyone help? It renders the audio unusable now, which means no VOIP calling or audio of any kind as I'm forced to keep it on mute. And I can't find anything on the Internet that indicates anyone else has had the same problem. Can anyone help? (And no idea if this is connected but my mouse is fluttering all over the place, which is yet another annoyance, leaving me wondering why I was so stupid as to upgrade.)
    Thanks!!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Emails don´t appear in phone´s inbox (only in subf...

    I run nokia messaging on e71 and synch with gmail.
    Many (gmail labeled) emails don´t appear in the phone´s inbox, but I have to navigate to the subfolder "all mail" to see them.
    Certainly, they appear in my gmail inbox just normally.
    Also, I am not alerted if these emails arrive on my phone (as only the inbox triggers the "new message" sound and is displayed on my active desktop.
    However, other emails can be found in both folders, but if I read/delete in one of the folders, it is not unread/deleted in the other. No need to say that this is really confusing.
    How can I handle this behavior?
    I have to comment that right now nokia mail is not really a professional push-email system that can compare to bb...

    I have the problem that is other way. My inbox is getting filled but my subfolder emails are not syncing...Please let me know if u have any solution. For each folder I also checked the subscribe to folder option also.
    thanks in advance
    sumanasu

  • My calendar alerts are no longer audio.

    My calendar alerts on my Ipod touch used to be audio.  At some point I've lost that.  The alert will pop up, but will not tone.  All other audio (alarm, music, etc.) works just fine.  How can I get my audio back for my alerts?

    think I did that right...the apple appeared anyway
    when I tap any of the sounds under the calendar alerts (or the reminder alerts) nothing is audible.  yet, when I tap under the ringtones, I can hear each of them as I change.  I did set the timer, just to make sure I could hear that, and it works just fine (played marimba just like always...)  This is bizarre, because the alerts used to tone...I don't remember doing anything different, or any updates, before they quit working.
    let me know if you can think of anything else...those tones are qreat for when I get busy.  I could set it to alert me an hour before an appointment and then I didn't miss a thing!

  • Lion seems to have added calendars I don't want

    Since upgrading to Lion many things I don't like have happened. Wish I had not done so, except for the nice brushed aluminum log-in screen.
    But in any case, a whole bunch of calendars have been added to my iCal that I do not want.  It doesn't seem I can delete them. This is looking more like a Microsoft product all the time, arrogantly acting as though it knows better than I do.

    If you do not like the new appearance of Firefox 4 then you can change some setting to restore the Firefox 3 appearance.
    To restore the old appearance right click the orange Firefox button to open the toolbar context menu or use (F10) View > Toolbars.
    * Click the Menu Bar entry and place a check-mark to make the Menu Bar visible all the time.
    * Click "Tabs on Top" to remove the check mark and place the Tab Bar at its original position just above the browser window.
    * https://support.mozilla.com/kb/why-are-tabs-top
    You can use this extension to get the Status Bar back:
    * Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    More tips here:
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

  • How do you fix certain app notifications that don't appear or appear twice?

    On my iPhone or iPad, sometimes there are notifications that don't appear or appear twice. For example, I have a Fox News app. When I get an alert on my phone while it is locked, the same exact news notification appears twice in a row when I go to look at my phone. Also, there are times when app notifications won't show. For example, I have Bloomberg on my iPhone and my iPad. When there is a headline, the notification shows on my iPad but not my iPhone. The settings on both devices are the exact same in terms of notification center and lock screen being activated. Neither device is jail broken and both are running iOS 6.

    I have also started experiencing this problem. I have tried the following with no help.
    Reseting the phone
    signing out of my Apple account and signing in again
    tapping the waiting icon to pause it and tapping it again
    deleting the app and trying to reload it - still says waiting
    The only thing that has allowed me to update my apps was to update them in itunes on my laptop and then sync my phone.
    This has to be a unique IOS issue, so many people are having this problem. I wonder if it is a Cloud issue?

  • Calendar alert issue

    Hi all,
    I've got a minor annoying issue. My wife (iPhone 4 with iOS6) and I (iPhone 5 wiht iOS6) share an apple account. On iCloud, we've got two calendars. The first is called "Calendar" which is there for us to put all of our general home stuff (birthdays, vacations, appts, etc) and is intended for both of us to use. I've got a second calendar called "Dan" which is just for me with a bunch of stuff she doesn't care about.
    Here's the issue. In Calendar, she clicked "Calendars" and deselected the "Dan" under "iCloud Calendars". The only other calendar her Calendar app now shows is our default shared calendar. So, anything I put on the "Dan" calendar no longer shows up... yay! HOWEVER, alerts from my "Dan" calendar still appear on her phone. In other words, if I put an event called "test" on JUST my "Dan" calendar with an alert to go off at 1:00, at that time, BOTH of our phones go off and display alerts. The Event still doesn't show up in her calendar though.
    SO, my question is, how can she make it so alerts from "Dan" calendar don't show up on her phone? It's annoying for her, and not cool for me if I want to put in an event that she shouldn't know about.
    Thanks,
    Dan P.

    Update since Genius visit:
    1) Apple is working on an update
    2) There is no awareness at Apple of this calendar alert issue as a bug, hence it is not being addressed/worked on
    3) Solutions offered by Genius have not resolved this issue.
    Solutions offered by Genius, in order of which to try first:
    1) Delete calendar data from iPhone: Settings>iCloud>Calendars OFF and then restore data from iCloud: Calendars ON
    2) Reset iPhone settings: Settings>General>Reset>Reset all settings
    3) Restore to factory settings: Settings>General>Reset>Erase all content and settings, then restore data from iCloud and in-app backups.
    4) Use another calendar app (seriously)
    Of course, if the bug is actually part of the iOS software (could it be?) then no amount of erasing and restoring data will fix the issue.  I completed the first two options with no change, and am not willing to do the third option because I am not interested in going through the process of backing up, then restoring all my third-party apps.
    My solution: raise awareness of this issue with Apple, so that it can be worked on and fixed.   I have reported it as a bug through Apple's feedback module: http://www.apple.com/feedback/iphone.html and I encourage-- no, ask-- you to do the same, if you are experiencing this issue.  I provided a link to this forum topic to show the variety and detail of problems.
    Are you sick of missing alerts, fiddling endlessly, coming up with workarounds, paying for unreliable software, and not being responded to?  I am.  It's time to rally!

Maybe you are looking for