Many component in the instalation of ER6 after upgrade
Hi
We recently upgrade our SAP system from 4.7 to SAP ERP 6 EHP4 and now in spam are showed many component that we not use. The base of ERP 6 have all this components or theyu2019re some error in the upgrade ?
Is normal that SAP_ABA and SAP_BASIS are installed but for example EA-HRCUS is strange. I know that they are not activated in spro but they are not necessary in the system.
I canu2019t find any documentation with the base components in ER6 .
SAP_ABA, SAP_BASIS, PI_BASIS,ST-PI, SAP_BS_FND, SAP_BW, SAP_AP, WEBCUIF, SAP_APPL, SAP_HR, SAP_HRCAR ,SAP_HRCAT, SAP_HRCAU, SAP_HRCBE, SAP_HRCBR, SAP_HRCCA, SAP_HRCCH, SAP_HRCCL, SAP_HRCCN, SAP_HRCDE, SAP_HRCDK, SAP_HRCES, SAP_HRCFI, SAP_HRCFR, SAP_HRCGBm, SAP_HRCHK, SAP_HRCID, SAP_HRCIE, SAP_HRCIN, SAP_HRCIT, SAP_HRCJP, SAP_HRCKR, SAP_HRCMX, SAP_HRCMY, SAP_HRCNL, SAP_HRCNO, SAP_HRCNZ, SAP_HRCPH, SAP_HRCPT, mSAP_HRCRU, SAP_HRCSE, SAP_HRCSG, SAP_HRCTH, SAP_HRCTW, SAP_HRCUS, SAP_HRCVE, SAP_HRCZA, SAP_HRGXX, SAP_HRRXX, EA-IPPE, EA-APPL, EA-DFPS, EA-FINSERV, EA-GLTRADE, , A-HR, EA-HRCAR, EA-HRCAT, EA-HRCAU, EA-HRCBE, EA-HRCBR, EA-, RCCA, EA-HRCCH, EA-HRCCN, EA-HRCDE, EA-HRCDK, EA-HRCES, EA-HRCFI, EA-HRCFR, EA-, RCGB, EA-HRCHK, EA-HRCID, EA-HRCIE, EA-HRCIN, EA-HRCIT, EA-HRCJP, EA-HRCKR, EA-HRCMX, EA-HRCMY, EA-HRCNL, EA-HRCNO, EA-HRCNZ, EA-HRCPHm EA-HRCPT, EA-HRCRU, EA-HRCSE, EA-HRCSG, EA-HRCTH, EA-HRCTW, EA-HRCUS, EA-HRCVE, EA-HRCZA, EA-HRGXX, EA-HRRXX, EA-PS, EA-RETAIL, FINBASIS, ECC-DIMP, ERECRUIT, FI-CA, FI-CAX, INSURANCE, IS-CWM, IS-H, IS-, IS-OIL, IS-PS-CA, IS-UT, LSOFE, SEM-BW,
Rgds
Is normal that SAP_ABA and SAP_BASIS are installed but for example EA-HRCUS is strange. I know that they are not activated in spro but they are not necessary in the system.
SAP implemented what they refer to as "CLC (Country Legal Changes) Decoupling" for HR support packages. This is so that if your country has legal changes that need to be applied then you can simply apply a support package specific to your country. So for EA-HRCUS it would be EA-HR changes specific to the country US. Initially you will have the "base" support package for all countries to support this method.
Nelis
Similar Messages
-
How do I copy the Mac OS Lion after upgrading?
How do I copy the Mac OS Lion after upgrading. I upgraded to OS Lion and now I want to do clean install because my macbook became slower since i installed lion.
Please, help! Thanks.You need to get on a Snow Leopard system, log into the App Store with your Apple ID, then download the Lion installer. The re-download is free. After the installer is downloaded it will start automatically. Now, quit the installer. You can now make a copy of the installer that you will find in the Applications folder.
Now, you also may be able to get this to work: Open the App Store application. Hold down the OPTION key while clicking on the Purchases icon in the toolbar. This is supposed to activate the Install button to the right of your Lion purchase entry. Clicking the Install button will then re-download the Lion installer. -
Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?
Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?
Free memory. You are probably getting crashes becasue you have too much stuff floating sround in memory. Double tap the home button to see the task bar. Touch and hold any of those icons until they jiggle, then delete them all by touching the minus sign.
Do this every day, or more oftern if needed to keep the system freed up. If you are using safari a lot, make sure to fully close some of the windows by touch the x on the tabs. Each window uses some active memory.
From time to time, do a full reboot by holding the sleep and home button until the apple logo appears. Ignore the red slider. This also frees up some system resources.
The iOS system is supposed to do this for you, but since the intro of ios 5 there are a fair number of folks crashing. -
My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2
My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
I have already put another chip carrier and the same problem happens, my phone is factory unlocked.Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
Regards
Joao -
Are you having problems with the Lacie external drive after upgrading to the new operating system
Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?
See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0 -
Can I always repair permissions from the install disc, even after updates?
Does anyone know if I can always repair permissions properly from my original install disc that came with my iMac thats 10.4.1. I now am 10.4.3 and was wondering if things change with every update rendering the install disc out of date for permission repair.
I read some where on the internet that after you update from the original OS you should just use disc utility. I know nothing about this sort of thing, any help on this and the types of utilities I might need would be greatly appreciated.Maybe this is dumb, but what do you mean by don't believe the hype on permissions repair.
are you talking about the posting I read about not being able to continuously update and boot from the original OS disks, or that repairing permissions is overated as far as system maintanence.
I get a lot of conflicting advise on system maintanence. Thats why I ask this. I'm fairly new to macs and how to keep them going problem free.
by the way,...
thanks for the replies guys
Yes, he can do the same with overkill third-party
utilities that aren't on a bootable disc for which
he's already paid. (And is Disk Utility so hard to
use that we need third-party utilies with this
function?)
Hmm. What if he specifically needs a bootable disc
that can repair permissions? Can't assume his
specific needs and environment when he hasn't
detailed them.
Bryan:
Don
't believe the hype about running permissions
repair. -
Unable to open Bootcamp install of Vista after upgrading MacBook Pro / Mid 2010 to OS Mavericks
Dear Community,
I am unable able to boot the Windows Vista install (via Boot Camp) on my MacBook Pro / mid 2010 after upgrading to OS Maverick.
Any idea about how this problem can be solved (I don't want to purchase Windows 7 and I don't want to purchase a virtual machine)?
Many thanks for your support!
Regards,
PSeguroHello 88,
I haven't resized / modified anything since installing Vista on my System. The problem must have incurred when upgrading from Snow Leopard to Maverick.
by the way:
I (just) found out that Windows Vista is booting (automatically) when I insert my original "Mac OS X Install DVD" / 10.6.3 (or my "Applications Install DVD") before starting the MacBook. It will - hwr - not boot without above DVDs in the tray...
sudo fdisk /dev/disk0:
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 510699696] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 511109336 - 1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 512378880 - 464394240] HPFS/QNX/AUX
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 510699696 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
511109336 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
512378880 464394240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 Sec GPT table
976773167 1 Sec GPT header
Regards, -
Can't install newest iphoto after upgrading to Yosmite
Hi guys,
After upgrading my OS to Yosmite, my iPhoto icon has a "no-entry" icon covering over it. When I tried to open, it asks for an update. When in the app store, I can't seem to install the newest iPhoto app. Anyone experiencing the same problem and able to rectify it?I can't seem to install the newest iPhoto app.
What happens when you try? -
Unable to install Aperture 3 after upgrade to OS X 10.8
After upgrading to OS X 10.8, when I try to install Aperture, I keep getting this error message "To open Aperture, Installer must quit and reopen". I have the box version of Aperture 3, so it's version 3.0 and I will not be able to download the latest dmg off Mac App Store. Any suggestion will be appreciated.
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number from the boxed version:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
To be able to run the installer in Mountain Lion you will have to change the System Preferences "Security & Privacy" temporarily to allow "Applications downloaded from anywhere"
Regards
Léonie -
Unable to connect to the MS Exchange server after upgrading to ios 7.1.2
I received a new iPad 4 through work. Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server. Contacted IT through work, they have no idea how to correct it. They say all of my settings are fine. The error message says "Cannot Get Mail The connection to the server failed." Any thoughts?
Appears to be a wifi connection problem. Did it work prior to the iOS update?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Since it's a company wifi, you won't be able to do many of these.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can't connect to the Hyper-V manager after upgrading to Windows Hyper-V 2012 R2
I have some Hyper-V server based on the free version (Windows Hyper-V 2012). I want to upgrade to the new version (Windows Hyper-V 2012 R2). So I begin to test it with
an already working server (aka I was able to totally manager the server remotely without problem) and so upgrade it to the R2.
After the upgrade, remote management and Hyper-V manager does not work anymore. So I redo my usual configuration steps (enable remote management, open firewall, uses
latest hvremote.wsf, etc.). I was able to regain access to Computer Manager but not the Hyper-V manager which still can't connect at all. I can't access the Task Scheduler too without having a lot of XML error like "The task XML contains a value which
is incorrectly formatted or out of range" (see below for screenshot).
Is there a new step to do to be able to manage Hyper-V 2012 R2 from a Windows 7 computer?
It's not a network problem as I can access RDP and MMC Computer Manager.
To be sure the problem is coming from the R2, I have taken an old computer, install Windows Hyper-V 2012, do my usual configuration step, and
tada: it works perfectly. I can access the Hyper-V manager from my client.
Technical details:
- Client is a Windows 7 SP1 x64 English member of a domain with latest RSAT (Windows6.1-KB958830-x64-RefreshPkg.msu).
- Servers are in a workgroup (not a domain's member). And no, I can't add them to the same domain as the client.HI,
Can we upgrade HyperV 2012 to hyper v 2012 R2.
Thanks
Atul -
Not able to install anything fully after upgrade to Snow Leopard
I haven't been able to install anything after upgrading to Snow Leopard yesterday. Anything program i do try to install just bouces on the dock
Try installing the update again from here
http://support.apple.com/kb/DL1048
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj -
Can't install cc-patches after upgrading to windows 8.1
Hi Adobe-Team,
after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
Thanks for your help
AndreasHi Andreas,
Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
Please follow the instructions specified on following kb doc and see if it helps -
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Let us know if it does not solve your problem.
Regards, -
Help with re-install of SL after upgrade
I installed SL upgrade over Leopard. Since then, I've had a lot of application crashes. From what I've read, it sounds like those who do a clean install don't have the crashes I'm experiencing. I want to now do a clean install.
Question: If I do a full Time Machine backup, then do an Erase and Install... can I then restore the Time Machine backup w/o overwriting the clean SL install?
Anything specific I need to know/set?
(I've not used TM before and can't quite find my answer)
Thanks!If you don't currently us TM then you can make a backup of what you do have using the Restore option of Disk Utility:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the backup drive.
Source means the startup drive.
Now boot from the SL DVD and after the installer loads select your language and click on the Continue button. When the menubar appears select Disk Utility from the Utilities menu. After DU loads select your current startup volume from the left sidebar, click on the Erase tab in the DU main window then click on the Erase button. After the erasing is completed quit DU and return to the installer. Complete the SL installation.
After the installation has completed and you restart the computer connect your backup drive. Open Migration Assistant from the Utilities folder. You can use Migration Assistant to migrate your Home folder and third-party application, preferences, and support files from your backup drive. -
After upgrade to IOS 7.0.2 I am unable to log on to my company server! Any one know how to solve?
cor=el,
First link. https://support.mozilla.com/en-US/kb/Web%20sites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser
Did not work.
◦general.useragent.override was the only one that had a "reset" option that wasn't greyed out.
After following as much of the proceedure as I could the problem was still there.
Of course, I never got an "incompatible browser" report. I got a missing USER AGENT report.
However the second link: http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
was more interesting. I reset the about:config file.
I then deleted my history and watched the useragent files in config RESET themselves to where they were before I reset them. I connected to a website successfully, then checked WHAT'S MY USER AGENT and it showed no User Agent again. I tried again to connect to the website and got the error.
I returned to About:Config and again reset the general.useragent files. After a while they went back to their pre-reset state on their own. Something is resetting them.
I disabled USERAGENTSWITCHER in FF (which had been installed in an attempt to deal with this problem) I rebooted FF and returned to About:Config where I realized any click after resetting the general.useragent list undid the reset exactly.
I reset the About:Config and immediately closed FF. I then rebooted FF. It was as if I had never reset the general.useragent list.
Something unknown is resetting the general.useragent to pre-reset conditions on my next action. I think the links SHOULD have worked except they are not, so the problem lies elsewhere
The "default" user agent is correct....it just keeps disappearing.
Maybe you are looking for
-
Issue in OTR creation with Numeric Range of Customer Code
Dear All, I am facing error while creating OTR with reference to Sales order in SAP TM system. The Error message "Business partner internal ID 0000710420 does not exist" appears when I Use Customer Code as Numeric, whereas if I create customer with A
-
Does New Mac Mini Support Native Command Queing (NCQ) Hard Drives?
I have noticed the NCQ spec present in certain hard drives, like some Seagate drives. Does Apple support this in the 2009 Mac Mini? Info available through Googling "Native Command Queing." Thanks.
-
Sum rows of Column A based on distinct values of Column B
Hello everyone, below is my xml <ROWSET> <ROW> <ORDER_NO>103-4385509</ORDER_NO> <SITE_NO>103</SITE_NO> <ORDER_ID>4385509</ORDER_ID> <CUSTOMER_ID>2676832</CUSTOMER_ID> <TAX_AMOUNT>.33</TAX_AMOUNT> <CREATED_DATE>08/20/2010</CREATED_DATE> <USER_CREATED>
-
Some Tables are missing in DBA_CAPTURE_PREPARED_TABLES
Hi, Using Oracle 10.2.0.3.0 on linux 64 bit I have setup one way Stream replication(SCHEMA REPLICATION) from production to destination server, when i am executing the query DBA_CAPTURE_PREPARED_TABLES view, it is not showing two or three tables, one
-
How to bring-up Lighting Effects Presets
I am exploring CS6 features (as a new users) and following an on-line course. I selected Lighting Effects Filters but I cannot see any Presets, for example Soft Lights, the PREVIEW, CANCEL, or OK buttons on a ribbon that should appear at the top of