Many devices missing in /dev inc snd dsp and all fdout

No sound and /dev/snd.../ dev/dsp... among many others.
  Is there a package missing from the system?

     Sarah;
  Thanks for the response. 
   I assure you I have searched the whole of forums identified with the sound problems encountered.  I would not start a new post if I had not exhausted the material.
   I have encountered :
   REGISTER ^ sound....et cetera
   REGISTER ^snd...et cetera
and as an alternative....
   REGISTER sound...etcetera
   REGISTER snd.... et cetera
   I tried them both!!!
   I have entered the long list of ...  aliases..more than once!!!
   I probably have more entries into various files as suggested by posts that probably need to cleared out.
    The significant thing I found by comparing this upgrade with the previous arch 2.4.21-1 was the missing files from /root/dev.  The number missing is probably 200 and the significant directories missing are /dev /snd and /dev/sound.
    Searching the forum for pertinent information concerning those particular files showed no reference to them.  I do not know how they are created.  I suspect they weren't properly upgraded when I upgraded to 2.4.24-1.
    I am aware of the procedures extant for alsa and its relevant data entries but my post refers to the missing files in /root/dev which by comparison with arch 2.4.21-1 number in the hundreds.
    I hope you understand my question better.

Similar Messages

  • How can I see how many devices are registered in my Apple Account and/or Apple ID?, How can I see how many devices are registered in my Apple Account and/or Apple ID?

    How can I see or determine how many devices are registered in my Apple Account and/or Apple ID?

    Sign in here and check:
    https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

  • HT2534 Many devices with one apple ID between husband and wife....HOW!?

    So, when my wife and I are both using separate iPads, how do we NOT get all these messages intended for the other person? One Apple ID for .... four products (Each have an ipad and ipod) makes it hectic enough. Now it's a nightmare figuring what to do. went into settings and changed HER imessages to her email address and I'm not getting anything and she's getting all of them. SO, now my devices won't recieve imessages etc. etc.
    Hope someon knows how to do this so I don't have to purchase a whole lot of more itunes crap again just because I'm not smart enough to figure out how to use a different apple id and keep my music.
    Oh, and that's it, the music and apps. We couldn't care less about most of the apps since I'm the only one BUYING them and she uses almost all free ones, but the MUSIC IS ALL ON ITUNES! Do I need to backup the entire library onto a bunch of disks and then "relicense" them from myself? How much work could THAT possibly be worth? Gotta be a simple solution. Never had so many apple products and these are my wife's first.
    HELP!!!!!!!!!!

    We're screwwwwwed! Not THAT familiar to apple, just barely plugging along and dove in with two ipads and two ipod touches. Previous experience was just two ipods (160 GB) that I had to still rotate audio books out of every few months... well, for me. My wife doesn't use hers as much. ANYWAY, I lost a zillion things with the ipod classic since it didn't have a back-up option and many of the CDs I scrounged up when it first came out were already lucky to have survived college. 8 years later and the computer that had the original files had been replaced umpteen times. ipods failed and decided to quit being a tight wad. Not sure if these gifts are worth it yet.... well, two of them were.

  • How many devices can I access my itunes match

    How many devices would I be able to view and play my itunes match music?

    Short answer: up to 5 computers and up to 10 for the total of computers and mobile devices combined.
    Long answer:
    To use Match, you have to "associate" a device or computer with your AppleID.  You can associate at total of 10 computers and iOS devices *combined*.  You can only associate *one Apple ID* with each device or computer, and this can only change once every 90 days.
    To play the music on a computer, you must additionally "authorize" the computer.  You can authorize a total of 5 computers to play the content.  You can authorize music for multiple users on one computer, and change the authorized computers for an AppleID.  You can deauthorize computers and authorize different computers as often as you want *if you have access to them*.  Otherwise, you would have to "deauthorize all", which you can only do once a year.
    I hope this helps.

  • Audio driver error, code 10 error & Media device missing Error in Presario C772TU

    Hello Hi to all,
    I am Manikandan.D working in BOSCH India and new user for this forum.
    I am having presario C7712TU model laptop, recently i reinstalled my Xp OS service pack 2.
    after that i reinstalled all drivers, but it showing some error in audio device driver.
    the error code is 10 and it is telling "media device missing"
    I have installed UAA driver + conexant HD audio driver
    Moreover i couldnt find any wireless LAN icon in network connection tab.
    could any body help me..Since i am in Germany..Now helpless!
    it is big trouble for me!!!
    Many thanks in advance to all!

    Dear Daniel,
    Thank you very much for your reply and effort, help!
    Yesterday i have installed Atheros driver...Now my wifi also turned on without any problem.
    I think you doing great job for all the people. keep the same spirit and continue the support!
    this has to be appreciated! why because some people they will break the head for the system problem.
    you are giving solution for the headache not for the system!!!
    anyways now my problem is solved thanks...!
    if possible send me your mail id to the below address.
    <text deleted for privacy>
    i will keep in touch with you!
    Message Edited by WendyM on 10-21-2009 07:04 AM

  • Router connection problems - DISH satellite receivers or too many devices?

    (Sorry about that - I thought I had broken the message up.)
    I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
    I have the following:
    - Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
    - HP desktop running Vista Home Premium
    - Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
    - Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
    - Linksys WRE54G Wireless Range Expander, v3
    My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
    Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
    I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
    I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
    I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
    I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
    I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
    I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
    Within an hour my connection timed out.
    Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
    ping 192.168.1.1 -t
    I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
    At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
    I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
    That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
    Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
    Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
    Anyway, I would very much appreciate some help.
    Message Edited by CKdoubleU on 10-01-2008 08:43 AM

    First please break that long text into separate paragraphs. No one wants to read one long runon sentences
    With Knowledge… Impossible means nothing.
    Credentials
    Computer experience: 11 years
    Cisco networks experience: 8 years
    Network administrator: 6 years
    N.E.T. networks experience: 6 years
    Linksys networks experience: 6 years
    Recent additions: A+ | Networks+ | Linux+ | Security+

  • How many devices can i run lion on it?

    how many devices can i run lion on it?

    As far as licensing goes, it seems that as long as all the Macs are being used in your household, there's no limit.
    From the Lion license file:
    "If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
    i) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running Mac OS X Snow Leopard or Mac OS X Snow Leopard Server (“Mac Computer”) that you own or control."

  • How many devices can sync to one apple ID?

    How many devices can sync to one apple ID?  I need to get all my music from an old computer to my new computer.  I just purchased an album on my new computer and it's not syncing with my iPhone 5 and I don't want to pay $25 for the Cloud.

    You can sync as many idevices as you like to one computer/library
    The iphone will sync with one and only one computer at a time.  Syncing to another will erase the current content fro the iphone.

  • Does anyone know how many devices one can have on one apple ID?

    Does anyone know how many devices one can have on one apple ID?

    The names are for your benefit. The devices are identified by serial number in iTunes. iTunes knows which device is which no matter what you name the devices. It works the same way with iCloud. You can name all three devices Fred - and iTunes can tell them apart - but like I said, you want to give them different names for your benefit.

  • How many devices can you have on one Apple ID?

    I Have a new iPad 2 air which is connected to the cloud but will not pull down books or pictures. It is the third active iPad I have ( one more old one no longer active) along with 2 iPhones.  is having this many devices a problem?

    5 Computers authorized through itunes, 10 mobile devices

  • HT1495 how many devices can be on one itunes account

    How many devices can be on one itunes account ? Is there a maximum

    For syncing iPods and iOS devices, there's no limit.
    For iTunes Store authorization, the limit is 5 computers.
    For iTunes Match, the limit is 10 computers and iOS devices.
    (93256)

  • I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

    I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
    How many Apple IDs can I have per device?
    I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
    I may load apps under a school Apple ID and have users load their own apps under thier own ID.
    How many devices can have the same Apple ID?
    Can I use the same Apple ID on all the computers in a lab?
    Can I use the same Apple ID on all iPads for a particular grade level?
    Are the rules different for iOS devices and computers?
    I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
    Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
    To make my life easier, I'd like 200 devices to all use the same Apple ID.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

  • I have been blocked from my own ITunes songs because my apple ID associated with too many devices

    I cannot access songs from my own iTunes Apple ID because it says my iPhone has been associated with too many devices.  I have to wait 90 days to access my own songs on my iPhone.  Here is what happend:
    1-Our family moved.  So, with the address change, the credit cards on all of the apple ID's would no longer work because the other users had our old address. (I have 4 users in the family).
    2-My family started calling me while I was out of town complaining that purchases were rejected.  This was because our address had changed and it no longer matched. 
    3-I tried to walk them thru the process of changing the home address on the credit card, but they couldn't do it.  They assured me that they were doing it correctly and were still rejected.
    4-So, being the techie of the family, I simply logged into each of their iTunes accounts from my iPhone while I was out of town and made the address change.  While I was in their  accounts, I noticed they didn't have automatic downloads and iTunes match and stuff.  So, I changed it so it would work for them when they logged back in.
    5-I go back to log into my own account on my iphone and I cannot access my own songs on the iTunes cloud for 90 days!!!!  This is quite disappointing.
    How can I get this corrected?   I tried to reset user settings (not a erase and reset).  I figure it's not my phone, but my iTunes account thinks I'm doing something sharing-wise.
    So, in summary, when I am on my iPhone and I go to my iTunes library and click on a song (that I have paid for) with the cloud and down arrow beside it, it's rejected.  It says that I have too many apple id's associated with this device and I must wait 90 days.  It counts down each day.
    I just want access to the music I paid FOR!!

    Thank you-I will contact support.
    No, I cannot wait 90 days.
    Let me restate what I have to endure, even though I own the music and have paid for iTunes Match:
    I cannot access my purchases-zero-at all
    I have to listen to never ending McDonald's latte commercials and progressive insurance. I have now banned both of those annoying businesses and will not make purchases there.
    In summary, I have given apple my minded, and have zero to show for it.
    Ps-you get to hear the McDonald's "love hate commercial" every 2 songs on iTunes Radio.  I have substituted the words where I hate McDonald's and love when the commercial is over.

  • Can I use my airport to see how many devices are on my network?

    Can I use my airport to see how many devices are on my network?

    No, that info was removed from the airport utility at v6 toyland edition.
    The last real utility was 5.6.1 and although it is not actually supposed to work on AC model it does sometimes.
    But you can generally see what is on your network using the netstat command in the computer..
    Open the network utility and go to the netstat page and run scan.. this can take a few minutes.. and should show all the clients as well as the router/s. At least all the ones the computer can see.
    The network utility is under utilized as people seem to not know of it.
    There are iOS tools like this as well. Sorry but I don't remember the name/s.

  • HT1420 I'm trying to authorize a new computer with an itune account, but my the computer statea that I have too many devices authorized. I only have 2 computers in my possession now. How can I deauthorize computer I don't have anymore without deauthorizin

    I have recently purchased a new lap top. Both my wife and I share our Itune music. When I purchesed the computer I was able to authorize my itunes account on it and move my purchaced music over from my iphone. However, I was not able to move my wifes music over because she has too many devices authorized under her account. Most of those computers are no longer in our possession and have been thrown out. How can she deauthorzise computer we don't have in our possession anymore without deauthorizing them all?

    Authorizing deauthorizing has NO effect at all on your itunes library.  You lose nothing.
    You should also alwasy have a backup copy.
    You MUST deauthorize all.
    You have the only answer there is.

Maybe you are looking for

  • I'm trying to update my 4s to ios 7 but it is not working. I only have ios 5, is that bad?

    I have ios 5, and have been trying to update to ios 7 but a message pops up saying it is unsuccessful. Do I need iOS 6 first? Why isnt it working?

  • MB Pro 2011 15"  changes resolution after logging out

    Within sleep mode or manually logging out on my high res 1680x 1050 MBPro 2011 15" the screen turns into 1440 x 852 resolution. The system shows up to have 2 connected monitors main monitor stays at 1680 x 1050 and 2nd monitor with 1440 x 852 No chan

  • Problems with Signed jar

    I am having a problem with signed jar and deploy in html get this error on the page self signed /dist/testfx.html JavaFX application could not launch due to system configuration. See java.com/javafx for troubleshooting information.Unsigned jar works

  • Nokia 5800 deleting from message boxes

    I have just moved to a 5800 from previous nokia phones I have had and cannot find a way to delete message box contents in bulk. There used to be a "mark all" in options but it does not appear to be there? Folders I would wish to empty are Text - inbo

  • Freezes during "starting windows" message even after factory reset.

    I've gone through diagnostic tests and they've shown it wasn't a hardware error. After a failed update to windows 10 my computer rolled back to windows 7. After the rollback when attempting to boot win 7 It froze and hung on the starting windows scre