Many dump in UDM_SPECIALIST

Hi all,
I configurate a functionality of Collection Managament. To try save a Promise to Pay show this error message: "Function call failed, could not find the function UDM_GOS_ATTCH_COMMIT" (plus other errors with multiples inconsistencies in function modules UDM*).
I work in a system with SAP ECC 6.0, Component FINBASIS 600 SP-Level 23.
Best regards
Felipe

Hi. I'm having the same problem. Can you tell me what are the specific components to run the transaction?
Regards,
Leandro.

Similar Messages

  • So many dumps ASE1200 error

    I am getting the below errors in our production system.I have already increased the number of locks.

    Let me try to address a few of your issues:
    QT videos from two seperate Canon Coolpix cameras
    Could be a problem (but probably not)
    audio from Itunes, some of it downloaded from the store
    Quite possibly a problem
    I have not exported to QT and then imported to IDVD
    That would be a way to see if the problem is iMovie/QT rendering your movie file correctly
    This is my first attempt at using IDVD5.
    I'm sure you didn't just start out on your 2,650 mile walk on the Pacific Crest Trail without a lot of shorter walks first. Sometime with applications like iMovie and iDVD, starting with a simple project first is also the best way to go.
    Both iMovie and iDVD have excellent tutorials you can do. They can be accessed from the Help menu item in both programs. Look for iDVD Getting Started/iMovie HD Getting Started. You will see the tutorials.
    I don't give up on anything easliy.
    I know how frustrating things like this can be. Sometimes, just stepping back a bit and taking a couple of deep breaths helps.
    There has been a suggestion that repairing permissions may help in some cases of the feared #34506, but I see you have already tried that.
    All of us here will try to get you through this.

  • Is there any BAPI allowing to retreive dump information in details?

    Dear all,
    I would like to ask a question about dumps that are sometimes generated on SAP sytems.
    Each morning, by using the transaction ST22 I can see the dumps that were generated during
    the precedent day. I click on each dump label then in the menu System > list > save
    I can save the dump file which includes technical information about the error (our
    developers look inside in order to find out what went wrong that gernerated the error)
    Now, sometimes there are actually too many dumps and saving each file by ST22 one by one
    takes too much time.
    I know ABAP programming language, I would like to ask is there any BAPI in SAP which could be called
    and that provides the same details that you can have by ST22 about the generated dumps? I was thinking
    to call inside a loop (as many times as there are dumps) this BAPI and write the datails about each
    dump in DATASET and creates the files.
    So, do you know any BAPI providing information about dumps?
    Thank you very much for your attention,
    Kind Regards,
    Dariyoosh

    Hello there,
    Thanks for this information, I'm going to look into the function group in order to
    see how I may use its function modules properly for my purpose.
    Thank you very much,
    Kind Regards,
    Dariyoosh

  • RFC call from portal gives dump call_function_open_error

    Hi all ,
    We have a RFC function module where standarad BAPI BAPI_ENTRY_SHEET_CREATE IS USED
    where a dump  call_function_open_error occurs when the rfc is called from portal , while on r3 it works fine.
    I wanted to know if somebody has faced this kind of problem anytime and what can be the possible solution .
    There is no problem with data , there is no problem with RFC where can be the problem ?
    Please suggest >

    Hi Bhanu,
    Can be helpful
    too many dumps in production Env: CALL_FUNCTION_OPEN_ERROR

  • Manny Dumps in production Please  helps

    I am facing a suddenly a problem in Production server
    In sm50 work process get stop one by one and if try to restart again it get stop.
    Ther are many dumps of 2 types but in different Tx and Table
    (DBIF_RSQL_INVALID_REQUEST, TEXTENV_UNICODE_LANGU_INVALID)in the system .
    In sm21 there is like to error like these
    21:00:43 DIA 023                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:00:43 DIA 023                       Q02 Stop Workproc23, PID 7384
    21:00:43 SPO 034                       BY2 Database error 12560 at CON
    21:00:43 SPO 034                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 SPO 034                       BY2 Database error 12560 at CON
    21:00:43 SPO 034                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 SPO 034                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:00:43 SPO 034                       Q02 Stop Workproc34, PID 1920
    21:00:43 DIA 015                       BY2 Database error 12560 at CON
    21:00:43 DIA 015                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 DIA 015                       BY2 Database error 12560 at CON
    21:00:43 DIA 015                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 DIA 015                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:00:43 DIA 015                       Q02 Stop Workproc15, PID 8820
    21:00:43 DIA 013                       BY2 Database error 12560 at CON
    21:00:43 DIA 013                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 DIA 013                       BY2 Database error 12560 at CON
    21:00:43 DIA 013                       BY0 > ORA-12560: TNS:protocol adapter error
    21:00:43 DIA 013                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:00:43 DIA 013                       Q02 Stop Workproc13, PID 8236
    21:05:10 WRK 000                       Q0Q Start Workproc 1, Pid 7012
    21:05:10 WRK 000                       Q0Q Start Workproc 0, Pid 4252
    21:05:10 WRK 000                       Q0Q Start Workproc 6, Pid 9112
    21:05:43 SPO 033                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:05:43 SPO 033                       Q02 Stop Workproc33, PID 7060
    21:05:43 BTC 029                       BY2 Database error 12560 at CON
    21:05:43 BTC 029                       BY0 > ORA-12560: TNS:protocol adapter error
    21:05:43 BTC 029                       BY2 Database error 12560 at CON
    21:05:43 BTC 029                       BY0 > ORA-12560: TNS:protocol adapter error
    21:05:43 BTC 029                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:05:43 BTC 029                       Q02 Stop Workproc29, PID 4288
    21:05:43 DIA 014                       BY2 Database error 12560 at CON
    21:05:43 DIA 014                       BY0 > ORA-12560: TNS:protocol adapter error
    21:05:43 DIA 014                       BY2 Database error 12560 at CON
    21:05:43 DIA 014                       BY0 > ORA-12560: TNS:protocol adapter error
    21:05:43 DIA 014                       R19 Initialization DB-Connect Failed, Return Code 000256
    21:05:43 DIA 014                       Q02 Stop Workproc14, PID 9456
    21:05:43 DP                            Q0I Operating system call gethostbyaddr failed (error no. 0 )
    21:05:43 DP                            Q04 Connection to user 5740 ( ), terminal 66 (HOLT088 ) lost
    21:07:10 ENQ 027                       Q02 Stop Workproc27, PID 6888
    21:07:10 ENQ 027                       Q02 Stop Workproc27, PID 6888
    21:07:11 RD                            S30 SAP gateway was closed
    21:07:11 RD                            S30 SAP gateway was closed
    21:07:13 DP                            Q0M Message server disconnected
    21:07:13 DP                            Q05 R/3 System stop, dispatcher PID 83
    21:07:13 MS                            Q02 Stop Msg Server, PID 10236
    21:07:13 DP                            Q0M Message server disconnected
    21:07:13 DP                            Q05 R/3 System stop, dispatcher PID 83
    At present listener is up and running and sap is working. It happen suddenely and after restart of R/3 system it ok but same thing happen today also. we are using windows 2003 Enterprise in server.
    Please help
    Best Regards,
    Kumar
    Edited by: Kumar on Aug 28, 2008 7:18 AM
    Edited by: Kumar on Aug 28, 2008 7:20 AM

    Dear All,
    Please find the dev_disp log
    trc file: "dev_disp", trc level: 1, release: "640"
    kernel runs with dp version 130000(ext=102000) (@(#) DPLIB-INT-VERSION-130000-UC)
    length of sys_adm_ext is 524 bytes
    sysno      00
    sid        **
    systemid   561 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    129
    intno      20020600
    make:      multithreaded, Unicode, 64 bit
    pid        6164
    ***LOG Q00=> DpSapEnvInit, DPStart (00 6164) [dpxxdisp.c   1098]
         shared lib "dw_xml.dll" version 129 successfully loaded
         shared lib "dw_xtc.dll" version 129 successfully loaded
         shared lib "dw_stl.dll" version 129 successfully loaded
         shared lib "dw_gui.dll" version 129 successfully loaded
         shared lib "dw_mdm.dll" version 129 successfully loaded
    Wed Aug 27 21:07:24 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3893]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpIPCInit2: start server >rfcl-sap-vir_PRD_00                     <
    DpShMCreate: sizeof(wp_adm)          51328     (1316)
    DpShMCreate: sizeof(tm_adm)          35937968     (17960)
    DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
    DpShMCreate: sizeof(comm_adm)          1248000     (624)
    DpShMCreate: sizeof(vmc_adm)          0     (512)
    DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D110050, size: 38247047)
    DpShMCreate: allocated sys_adm at 000000000D110050
    DpShMCreate: allocated wp_adm at 000000000D111C30
    DpShMCreate: allocated tm_adm_list at 000000000D11E4B0
    DpShMCreate: allocated tm_adm at 000000000D11E4E0
    DpShMCreate: allocated wp_ca_adm at 000000000F364390
    DpShMCreate: allocated appc_ca_adm at 000000000F377C10
    DpShMCreate: allocated comm_adm_list at 000000000F39ED10
    DpShMCreate: allocated comm_adm at 000000000F39ED30
    DpShMCreate: allocated vmc_adm_list at 000000000F4CF830
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F4CF860
    DpShMCreate: allocated wall_adm at 000000000F4CF870
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 1226 blocks reserved for free list.
    ES initialized.
    Wed Aug 27 21:07:25 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.6 2.6 4.0) [dpxxdisp.c   1466]
    **LOG Q0K=> DpMsAttach, mscon (**) []
    use SAPLOCALHOST***> as internal hostname
    DpStartStopMsg: send start message (myname is ***<)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Wed Aug 27 21:07:27 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 129
    Release check o.K.
    Wed Aug 27 21:07:50 2008
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Wed Aug 27 21:18:22 2008
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T39, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Wed Aug 27 21:18:24 2008
    Client address of T39 is >####->###- ###<)< .107(***)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (54 ***) [dpxxdisp.c   9632]
    RM-T39, U54, 600 ***, ***, M0, W0, SESS, 2/0
    Wed Aug 27 21:19:34 2008
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Wed Aug 27 21:19:35 2008
    Client address of T40 is >####->###- ###<)< .34(>####->###- ###<)< ->####->###- ###<)< )
    ***LOG Q04=> DpRTmPrep, NiBufReceive (59 ***) [dpxxdisp.c   9632]
    RM-T40, U59, 600 ***, 21:18:41, M0, W0, SESS, 2/0
    Wed Aug 27 21:38:45 2008
    DpHdlDeadWp: restart wp (pid=2484) automatically
    Wed Aug 27 21:39:05 2008
    Wed Aug 27 21:41:05 2008
    DpHdlDeadWp: restart wp (pid=1900) automatically
    Wed Aug 27 21:48:05 2008
    DpHdlDeadWp: restart wp (pid=4384) automatically
    Wed Aug 27 22:01:05 2008
    DpHdlDeadWp: restart wp (pid=4500) automatically
    Wed Aug 27 22:01:45 2008
    DpHdlDeadWp: restart wp (pid=2028) automatically
    Wed Aug 27 22:09:45 2008
    DpHdlDeadWp: restart wp (pid=9536) automatically
    Wed Aug 27 22:10:05 2008
    DpHdlDeadWp: restart wp (pid=1972) automatically
    DpHdlDeadWp: restart wp (pid=7596) automatically
    DpHdlDeadWp: restart wp (pid=10104) automatically
    DpHdlDeadWp: restart wp (pid=6296) automatically
    DpHdlDeadWp: restart wp (pid=7720) automatically
    Wed Aug 27 22:12:05 2008
    DpHdlDeadWp: restart wp (pid=2428) automatically
    Wed Aug 27 22:28:05 2008
    DpHdlDeadWp: restart wp (pid=9992) automatically
    Wed Aug 27 22:34:24 2008
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Wed Aug 27 22:34:29 2008
    ***LOG Q0I=> NiPGetHostByAddr: address ***not found: gethostbyaddr [ninti.c 379]
    Client address of T40 is *** (***)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (122 ***) [dpxxdisp.c   9632]
    RM-T40, U122, 600 ***, ***M0, W0, ZVN1, 2/2
    Wed Aug 27 22:35:49 2008
    DpHdlDeadWp: restart wp (pid=7132) automatically
    Wed Aug 27 22:40:49 2008
    DpHdlDeadWp: restart wp (pid=9272) automatically
    DpHdlDeadWp: restart wp (pid=7896) automatically
    DpHdlDeadWp: restart wp (pid=8856) automatically
    DpHdlDeadWp: restart wp (pid=8272) automatically
    Wed Aug 27 22:41:49 2008
    DpHdlDeadWp: restart wp (pid=1372) automatically
    DpHdlDeadWp: restart wp (pid=8276) automatically
    Wed Aug 27 22:56:49 2008
    DpHdlDeadWp: restart wp (pid=10128) automatically
    Wed Aug 27 23:07:49 2008
    DpHdlDeadWp: restart wp (pid=4476) automatically
    Wed Aug 27 23:11:49 2008
    DpHdlDeadWp: restart wp (pid=8404) automatically
    Wed Aug 27 23:13:49 2008
    DpHdlDeadWp: restart wp (pid=9268) automatically
    Wed Aug 27 23:14:49 2008
    DpHdlDeadWp: restart wp (pid=6472) automatically
    Wed Aug 27 23:15:03 2008
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Wed Aug 27 23:15:09 2008
    ***LOG Q0I=> NiPGetHostByAddr: address ***not found: gethostbyaddr [ninti.c 379]
    WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c   16611]
    Client address of T42 is *** (***)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (165 ****** ) [dpxxdisp.c   9632]
    RM-T42, U165, 600 RFCL-CFA-AHDHOLT267, HOLT267, 23:10:06, M0, W0, ZVN1, 2/2
    Wed Aug 27 23:29:49 2008
    DpHdlDeadWp: restart wp (pid=8020) automatically
    Wed Aug 27 23:31:09 2008
    DpHdlDeadWp: restart wp (pid=9936) automatically
    Wed Aug 27 23:41:29 2008
    DpHdlDeadWp: restart wp (pid=1972) automatically
    Wed Aug 27 23:41:49 2008
    DpHdlDeadWp: restart wp (pid=9168) automatically
    Wed Aug 27 23:41:50 2008
    DpHdlDeadWp: restart wp (pid=5180) automatically
    DpHdlDeadWp: restart wp (pid=5568) automatically
    DpHdlDeadWp: restart wp (pid=5964) automatically
    DpHdlDeadWp: restart wp (pid=7352) automatically
    DpHdlDeadWp: restart wp (pid=5464) automatically
    DpHdlDeadWp: restart wp (pid=9080) automatically
    DpHdlDeadWp: restart wp (pid=9316) automatically
    Wed Aug 27 23:42:09 2008
    DpHdlDeadWp: restart wp (pid=9284) automatically
    Wed Aug 27 23:42:49 2008
    DpHdlDeadWp: restart wp (pid=640) automatically
    Wed Aug 27 23:45:49 2008
    DpHdlDeadWp: restart wp (pid=5712) automatically
    Wed Aug 27 23:47:49 2008
    DpHdlDeadWp: restart wp (pid=4872) automatically
    Thu Aug 28 00:01:49 2008
    DpHdlDeadWp: restart wp (pid=6648) automatically
    Thu Aug 28 00:02:09 2008
    DpHdlDeadWp: restart wp (pid=6380) automatically
    Thu Aug 28 00:02:29 2008
    DpHdlDeadWp: restart wp (pid=7656) automatically
    Thu Aug 28 00:11:49 2008
    DpHdlDeadWp: restart wp (pid=1576) automatically
    Thu Aug 28 00:16:48 2008
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Thu Aug 28 00:16:54 2008
    ***LOG Q0I=> NiPGetHostByAddr: address ******not found: gethostbyaddr [ninti.c 379]
    WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c   16611]
    Client address of T40 is *(**)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (201 ******) [dpxxdisp.c   9632]
    RM-T40, U201, 600 ****, ***7, 00:11:42, M0, W1, ZVSL, 2/1
    Thu Aug 28 03:59:54 2008
    DpHdlDeadWp: restart wp (pid=6008) automatically
    Thu Aug 28 04:00:54 2008
    DpHdlDeadWp: restart wp (pid=1776) automatically
    Thu Aug 28 05:01:14 2008
    DpHdlDeadWp: restart wp (pid=7496) automatically
    Thu Aug 28 05:04:14 2008
    DpHdlDeadWp: restart wp (pid=7848) automatically
    Thu Aug 28 05:07:14 2008
    DpHdlDeadWp: restart wp (pid=9600) automatically
    Thu Aug 28 05:14:54 2008
    DpHdlDeadWp: restart wp (pid=480) automatically
    Thu Aug 28 06:25:54 2008
    DpHdlDeadWp: restart wp (pid=7404) automatically
    Thu Aug 28 06:26:54 2008
    DpHdlDeadWp: restart wp (pid=9508) automatically
    ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
    Network error of client T44, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Thu Aug 28 06:32:07 2008
    ***LOG Q0I=> NiPGetHostByAddr: address ****** not found: gethostbyaddr [ninti.c 379]
    WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c   16611]
    Client address of T44 is **(*)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (255 &&&& ) [dpxxdisp.c   9632]
    RM-T44, U255, 600 ****, 06:27:03, M0, W0, SQVI, 2/2
    Thu Aug 28 06:39:54 2008
    DpHdlDeadWp: restart wp (pid=2080) automatically
    Thu Aug 28 06:47:54 2008
    DpHdlDeadWp: restart wp (pid=6620) automatically
    Thu Aug 28 06:48:34 2008
    DpHdlDeadWp: restart wp (pid=6856) automatically
    Thu Aug 28 06:50:54 2008
    DpHdlDeadWp: restart wp (pid=8780) automatically
    Thu Aug 28 06:51:14 2008
    ERROR => W28 (pid 2104) died [dpxxdisp.c   12414]
    Thu Aug 28 06:53:34 2008
    ERROR => W28 (pid 7484) died [dpxxdisp.c   12414]
    Thu Aug 28 06:55:54 2008
    DpHdlDeadWp: restart wp (pid=4212) automatically
    Thu Aug 28 06:56:34 2008
    ERROR => W1 (pid 7940) died [dpxxdisp.c   12414]
    Thu Aug 28 06:56:54 2008
    DpHdlDeadWp: restart wp (pid=9144) automatically
    Thu Aug 28 06:57:34 2008
    ERROR => W33 (pid 8824) died [dpxxdisp.c   12414]
    Thu Aug 28 06:57:54 2008
    DpHdlDeadWp: restart wp (pid=3640) automatically
    DpHdlDeadWp: restart wp (pid=8420) automatically
    Thu Aug 28 06:58:34 2008
    ERROR => W1 (pid 9156) died [dpxxdisp.c   12414]
    ERROR => W5 (pid 7220) died [dpxxdisp.c   12414]
    ERROR => W28 (pid 8444) died [dpxxdisp.c   12414]
    ERROR => W33 (pid 5500) died [dpxxdisp.c   12414]
    ERROR => W34 (pid 8076) died [dpxxdisp.c   12414]
    Thu Aug 28 06:58:54 2008
    DpHdlDeadWp: restart wp (pid=6692) automatically
    Thu Aug 28 06:59:34 2008
    ERROR => W35 (pid 1996) died [dpxxdisp.c   12414]
    Thu Aug 28 06:59:54 2008
    DpHdlDeadWp: restart wp (pid=8832) automatically
    DpHdlDeadWp: restart wp (pid=6644) automatically
    Thu Aug 28 07:00:34 2008
    ERROR => W29 (pid 8108) died [dpxxdisp.c   12414]
    ERROR => W36 (pid 6760) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xbf --> 0xaf
    Thu Aug 28 07:01:34 2008
    DpHdlDeadWp: restart wp (pid=8304) automatically
    Thu Aug 28 07:02:54 2008
    my types changed after wp death/restart 0xa7 --> 0xbf
    Thu Aug 28 07:03:34 2008
    ERROR => W1 (pid 1716) died [dpxxdisp.c   12414]
    ERROR => W2 (pid 9320) died [dpxxdisp.c   12414]
    ERROR => W5 (pid 5296) died [dpxxdisp.c   12414]
    ERROR => W28 (pid 6256) died [dpxxdisp.c   12414]
    ERROR => W29 (pid 8468) died [dpxxdisp.c   12414]
    ERROR => W30 (pid 9000) died [dpxxdisp.c   12414]
    ERROR => W31 (pid 5612) died [dpxxdisp.c   12414]
    ERROR => W32 (pid 3844) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xbf --> 0xb7
    ERROR => W33 (pid 1700) died [dpxxdisp.c   12414]
    ERROR => W34 (pid 1268) died [dpxxdisp.c   12414]
    ERROR => W35 (pid 9048) died [dpxxdisp.c   12414]
    ERROR => W36 (pid 9668) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xb7 --> 0xa7
    Thu Aug 28 07:07:54 2008
    my types changed after wp death/restart 0xa7 --> 0xbf
    DpHdlDeadWp: restart wp (pid=1172) automatically
    Thu Aug 28 07:11:54 2008
    DpHdlDeadWp: restart wp (pid=6484) automatically
    Thu Aug 28 07:12:34 2008
    ERROR => W3 (pid 1700) died [dpxxdisp.c   12414]
    Thu Aug 28 07:17:54 2008
    my types changed after wp death/restart 0xa7 --> 0xbf
    DpHdlDeadWp: restart wp (pid=8212) automatically
    DpHdlDeadWp: restart wp (pid=9276) automatically
    Thu Aug 28 07:18:34 2008
    ERROR => W2 (pid 1936) died [dpxxdisp.c   12414]
    DpHdlDeadWp: restart wp (pid=5108) automatically
    ERROR => W7 (pid 3644) died [dpxxdisp.c   12414]
    Thu Aug 28 07:18:54 2008
    DpHdlDeadWp: restart wp (pid=708) automatically
    ERROR => W4 (pid 1560) died [dpxxdisp.c   12414]
    Thu Aug 28 07:19:14 2008
    ERROR => W0 (pid 8636) died [dpxxdisp.c   12414]
    Thu Aug 28 07:19:34 2008
    DpHdlDeadWp: restart wp (pid=1736) automatically
    Thu Aug 28 07:19:54 2008
    ERROR => W11 (pid 9428) died [dpxxdisp.c   12414]
    DpHdlDeadWp: restart wp (pid=7572) automatically
    DpWpRestart: pid 8056 of WP12 also found for WP28 - removed
    ERROR => W28 (pid 8056) died [dpxxdisp.c   12414]
    DpHdlDeadWp: restart wp (pid=5932) automatically
    DpWpRestart: pid 4248 of WP13 also found for WP31 - removed
    ERROR => W31 (pid 4248) died [dpxxdisp.c   12414]
    DpHdlDeadWp: restart wp (pid=1988) automatically
    DpWpRestart: pid 5220 of WP14 also found for WP33 - removed
    ERROR => W33 (pid 5220) died [dpxxdisp.c   12414]
    Thu Aug 28 07:20:14 2008
    ERROR => W12 (pid 8056) died [dpxxdisp.c   12414]
    ERROR => W13 (pid 4248) died [dpxxdisp.c   12414]
    ERROR => W14 (pid 5220) died [dpxxdisp.c   12414]
    Thu Aug 28 07:20:34 2008
    DpHdlDeadWp: restart wp (pid=1348) automatically
    Thu Aug 28 07:20:54 2008
    DpHdlDeadWp: restart wp (pid=6220) automatically
    Thu Aug 28 07:21:14 2008
    ERROR => W15 (pid 6096) died [dpxxdisp.c   12414]
    ERROR => W16 (pid 4264) died [dpxxdisp.c   12414]
    Thu Aug 28 07:21:34 2008
    DpHdlDeadWp: restart wp (pid=8708) automatically
    Thu Aug 28 07:47:54 2008
    my types changed after wp death/restart 0xa6 --> 0xbf
    Thu Aug 28 07:48:34 2008
    ERROR => W0 (pid 6496) died [dpxxdisp.c   12414]
    ERROR => W1 (pid 6772) died [dpxxdisp.c   12414]
    ERROR => W2 (pid 6264) died [dpxxdisp.c   12414]
    ERROR => W3 (pid 6760) died [dpxxdisp.c   12414]
    ERROR => W4 (pid 5772) died [dpxxdisp.c   12414]
    ERROR => W5 (pid 9164) died [dpxxdisp.c   12414]
    ERROR => W6 (pid 5244) died [dpxxdisp.c   12414]
    ERROR => W7 (pid 7908) died [dpxxdisp.c   12414]
    ERROR => W8 (pid 9604) died [dpxxdisp.c   12414]
    ERROR => W9 (pid 4472) died [dpxxdisp.c   12414]
    ERROR => W10 (pid 7164) died [dpxxdisp.c   12414]
    ERROR => W11 (pid 1996) died [dpxxdisp.c   12414]
    ERROR => W12 (pid 9864) died [dpxxdisp.c   12414]
    ERROR => W13 (pid 1848) died [dpxxdisp.c   12414]
    ERROR => W14 (pid 8348) died [dpxxdisp.c   12414]
    ERROR => W15 (pid 4536) died [dpxxdisp.c   12414]
    ERROR => W16 (pid 5808) died [dpxxdisp.c   12414]
    ERROR => W17 (pid 5444) died [dpxxdisp.c   12414]
    ERROR => W18 (pid 7444) died [dpxxdisp.c   12414]
    ERROR => W19 (pid 1160) died [dpxxdisp.c   12414]
    ERROR => W20 (pid 2028) died [dpxxdisp.c   12414]
    ERROR => W21 (pid 4364) died [dpxxdisp.c   12414]
    ERROR => W22 (pid 8752) died [dpxxdisp.c   12414]
    ERROR => W23 (pid 3944) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W28 (pid 8952) died [dpxxdisp.c   12414]
    ERROR => W29 (pid 7804) died [dpxxdisp.c   12414]
    ERROR => W30 (pid 4940) died [dpxxdisp.c   12414]
    ERROR => W31 (pid 8292) died [dpxxdisp.c   12414]
    ERROR => W32 (pid 9200) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xbe --> 0xb6
    ERROR => W33 (pid 7888) died [dpxxdisp.c   12414]
    ERROR => W34 (pid 4396) died [dpxxdisp.c   12414]
    ERROR => W35 (pid 5496) died [dpxxdisp.c   12414]
    ERROR => W36 (pid 8252) died [dpxxdisp.c   12414]
    my types changed after wp death/restart 0xb6 --> 0xa6
    Thu Aug 28 07:50:00 2008
    DpSigInt: caught signal 2
    DpHalt: shutdown server >####->###- ###<)< (normal)
    DpModState: change server state from ACTIVE to SHUTDOWN
    Stop work processes...
    Thu Aug 28 07:50:01 2008
    Stop gateway
    Stop icman
    Terminate gui connections
    waiting for termination of gateway
    Thu Aug 28 07:50:02 2008
    waiting for termination of icman
    Thu Aug 28 07:50:03 2008
    DpStartStopMsg: send stop message (myname is >###- ###<)
    DpStartStopMsg: stop msg sent
    Thu Aug 28 07:50:04 2008
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   10153]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 6164) [dpxxdisp.c   8643]
    Thanks
    Kumar
    Edited by: Kumar on Aug 28, 2008 9:30 AM

  • Dumps due to ORA: 01116

    HELLO,
    We are getting too many dumps in ECC system "DBIF__RSQL_SQL_ERROR"
    Please find the log
    How to correct the error
        Database error text........: "ORA-01116: error in opening database file
         83#ORA-01110: data file 83: '/oracle/SID/sapdata12/sr3_67/sr3.data67'#ORA-2704
        1: unable to open file#Linux-x86_64 Error: 13: Permission denied#Additional
         information: 3"
        Internal call code.........: "[RSQL/FTCH/MARM ]"
        Please check the entries in the system log (Transaction SM21).
    Regards,
    uday

    Hi,
    As per your question & dump arises may be few things happen-:
    1.) Please check permission of all datafiles at OS Level.
    2.)Please check sm21 Log .
    3.) Please check any datafile may be missing or deleted.
    4.) check alert &  trace log of oracle in path /oracle/SID/saptrace.../...
    Please check the following points hope this will resolve issue.
    get back if u require further assistance.

  • Is it possible for a background program to produce TIME_OUT Dump?

    Hello Experts,
    When i have analyzed the Dumps using Tcode ST22 in my production system, I found many dumps.
    My doubt is that, is it possible for a program scheduled to run in background to produce TIME_OUT dump?
    I faced a scenario like this. What could be done to avoid this?
    Can this be because of some settings problem? If so, what kind of settings has to be changed?
    Thanks and Best Regards,
    Suresh

    Hi,
    As far as time out for Background programs are concern I think there is no time out for programes executing in background
    First try to improve performance of your program like read with binary search , create table index etc.
    Then consult basis ppl in this regard they can set big time out slot so that your probram will not go into dump.
    Regards
    Bikas

  • XPRAS_UPG error in DOWNTIME phase in EHP4

    Hi,
    I am getting the below error in XPRAS_UPG in DOWNTIME phase of EHP4 installation in ERP 6.0 on HP-UNIX and Oracle.
    XPRA ERRORS and RETURN CODE in SAPRW70104.HD1
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDEXECL", no.: "10302400")
      Long text:
        Cause
          Program "&V#&", which was started in the background, was terminated
          abnormally.
        System Response
          The system created a job log for the terminated program.
        What to do
          Proceed as follows:
          Log onto the system in which the program was executed. The system is
          specified at the beginning of the transport log.
          Then call transaction SM37 to display the job log.
          Enter "&V#&" as job name and "DDIC" as user name.
          Restrict the starting date to the starting date specified in the
          transport log.
          For the other selection criteria, select only jobs with the status
          "cancelled". Then press <LS>Execute</>.
          A list of the jobs satisfying the selection criteria is displayed.
          You can display the log by pressing <LS>Job log</>.
          If the list contains several jobs, you can select the job with the ID "
          &V#&" with <LS>Display</> -> <LS>Job details</> or define further
          details for the selection criteria in the initial screen of transaction
          SM37.
          If the ABAP processor reports cancellation, double-clicking on the
          corresponding message in the job log branches to the display of the
          corresponding short dump.
    1AEPU320 See job log"RDDEXECL""10302400""HD1"
    1 ETP111 exit code           : "12"
    >>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
    XPRAs are application reports that run at the end of an upgrade.
    Most XPRA reports have a report documentation that explains what
    the report does and how errors can be corrected.
    Call transaction se38 in the SAP system, enter the report name,
    select 'Documentation' and click the 'Display' button.
    >>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
    I was successfully able to umlock the system and in SM37 I could see the job log pointing to ST22. In ST22 we have many dumps related to error PXA_NO_FREE_SPACE. I found many notes in marketplace but all are referring the parameter abap/buffersize which needs to increased. I am a bit apprehensive about the fact that since we are in DOWNTIME phase and in the middle of XPRA execution phase should we increase the parameter and restart the system and then continue with the upgrade???
    I have also tried to run the phase many times but the same error persists.
    Please can anyone help me to come out of this problem.....
    Thanks & regards,
    Rozal

    Hello Rozal,
    You are correct XPRAS is a downtime 2 phase, but actually your system is up and running. It was started way back in phase "STARTSAP_NBAS" its just that you cannot use your system productively. XPRAS executes the XPRAS methods in the running system.
    Its absolutely safe, you can change the parameter take a restart and continue further.
    - Niraj

  • 8 Qestion. Looking clarifiction on doubuts for funda II exam.

    Answer are marked in bold letter. But I have some doubts written in ‘[ ]’ after q. If anyone can clarify it.
    Thanks in advance.
    29. Which two statements regarding the control file and Recovery
    Manager are true? (Choose two)
    A. The control file can grow in size.
    B. The control file can store RMAN scripts.
    C. CONTROL_FILE_RECORD_KEEP_TIME determines retention time for RMAN
    records.
    D. The RMAN catalog can exist solely in the control file of the
    target database.
    [ Is A also not correct ]
    73. What is the purpose of importing from an export, and specifying
    that no rows be imported and that the output goes to a log file?
    A. To verify space requirements in the target database before
    importing.
    B. To generate the SQL for the DDL operations that would occur during
    import.
    C. To check character set compatibility between the export file and
    the target database.
    D. To check for integrity constraint violations that would occur in
    the target database.
    [many dumps says B too ]
    Question: 92
    You want to drop the TBS1 table space from your database.
    You also want to delete the corresponding data files automatically,
    and not have to do it
    manually. What should you do?
    A. Use the DROP DATA FILE command.
    B. Use the DROP TABLE SPACE command.
    C. Ensure that all database files are Oracle Managed Files before
    using the DROP
    TABLE SPACE command.D. Ensure that the DB_FILE_CREATE_DEST initialization parameter is
    set before using the
    DROP TABLE SPACE command
    Question: 148
    You need to import all definitions of objects belonging to the
    TS_EMPLOYEES
    table space by using the export file expdat.dmp.
    Which import statement is correct?
    A. imp hr/hr TABLES=(ts_employees) rows=y
    B. imp system/manager FROMUSER=hr file=expdat.dmp
    C. imp hr/hr TRANSPORT_TABLE SPACE=y file=expdat.dmp
    D. imp system/manager TRANSPORT_TABLE SPACE=y
    TABLE SPACE=ts_employees
    [ is C & D both correct]
    Question: 168
    Your database runs in ARCHIVE LOG mode, and is backed up every Sunday
    night
    using RMAN scripts. On Friday your database crashes. Now you want to
    use the
    backups from last Sunday night to restore your database. How can you
    do this?
    A. You need to perform the restore manually, because your database
    was running in ARCHIVE
    LOG mode.
    B. Issue the RECOVER command from within RMAN. RMAN determines which
    data files to
    restore, and which archive logs to use.
    C. Issue the RESTORE and RECOVER commands from within RMAN. RMAN
    determines
    which data files to restore, and which archive logs to use.
    D. Issue the RESTORE DATA FILES, RESTORE ARCHIVE LOGS, and RECOVER
    commands from within RMAN.MAN determines which data files to restore,
    and which archive
    logs to use.
    [What about C]
    Question: 257
    Users in your development database complain that they are getting the
    following error while trying
    to execute a query on the SALES_HISTORY table:
    ERROR at line 1:
    ORA-00942: table or view does not exist
    While investigating the reason, you find that a hardware failure
    occured, resulting in the loss of
    one of the available disk drives used by the database. While waitinig
    for a replacement drive, the
    OBA removed the un-needed data from the database and during the
    removl the
    SALES_HISTORY table was dropped accidentally.
    Within few minutes a second hardware failure corrupted another disk
    drive, resulting in
    the loss of the current online redo log files and the logical back
    ups of the database. The redo log
    files were not multiplexed and the current redo log file is not yet
    archived.
    Which recovery method would you follow to recover the SALES_HISTORY
    table?
    A - Open Database complete recovery
    B - Cancel-Based incomplete recoveryC - Change-Based incomplete recovery
    D - Closed Database complete recovery
    E - Recovery using the backup control file
    [ But how that will restore sales_history table, as when it got drop implicitly issue  commit , switch redo log file]
    Question: 318
    Which statement is true regarding database writer process (DBWn)?
    A - It writes only committed data to the data riles.
    B - It synchronizes the database buffer cache and the data files
    regularly.C - It makes changes to data blocks in the database buffer cache when
    required.
    D - It is possible to configure more than one database writer
    process, but this is useful only on
    uniprocessor systems
    [ Is D also not correct ]
    When We select naming method TSN_name [local] only SqlNET.ora file get updated or tnsname.ora too ?

    IT Guru,
    You are already certified, then take care of the granted credential. Do you remember the ORACLE® CERTIFICATION PROGRAM CANDIDATE AGREEMENT ?
    Section 3.3 No Misuse of the Test
    You agree that You will not copy, publish, offer to sell, sell, publicly perform or display, distribute in any way or otherwise transfer, modify, make derivative works thereof, reverse engineer, decompile, disassemble or translate any Certification Exam or part thereof.
    Your credential could be revoked according to the
    Oracle Certification Program Fraudulent Activity Policy
    Oracle reserves the right to take action against any candidate involved in fraudulent activities, including, but not limited to, fraudulent use of vouchers, promotional codes, reselling exam discounts and vouchers, cheating on an exam, alteration of score reports, alteration of completion certificates, violation of exam retake policies or other activities deemed fraudulent by Oracle.
    If Oracle determines, in its sole discretion, that fraudulent activity has taken place, it reserves the right to take action up to and including, but not limited to, decertification of a candidate's OCA, OCP and/or OCM credentials, temporary, indefinite or permanent ban of a candidate from Oracle certification programs, notification to a candidate's employer, and notification to law enforcement agencies. Candidates found committing fraudulent activities forfeit all fees previously paid to Oracle, or to Oracle's authorized vendors, and may be required to pay additional fees for services rendered.
    ~ Madrid.

  • TSV_TNEW_PAGE_ALLOC_FAILED  error while executing the report

    Hi all,
    . We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report  on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
    Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
    Now when I provide the key date as 30.06.2011 and Company code =XYZ.
    I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
    Variables:
    1. Key Date:  Is a  Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from     u201C00000000u201D to u201C30.06.2011u201D.
    2.Company code: Is a Manual Entry /Default variable.
    I also have shot dump.Please find the error analysis of dump below:
    The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
    ABIX[1]-GTABIX" could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 4
    Number of rows: 1503307
    Allocated rows: 1503307
    Newly requested rows: 2048 (in 1 blocks)
    can any one help me .......
    Regards
    Laxman

    Hi,
    Just check following things
    1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
    2. See whether any back up process is happening and it has consumed the main memory.
    3. Are you getting this error regularly
    4. See any transport went and compression/aggregation got removed.
    5. Check whether there are many dumps in ST22 same time when you execute report
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
    6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
    7. Check whether Infoprovifder got removed from BIA
    8. Query removed from BIA post transport
    9. Run RSRT and regenerate the report.
    Thanks and regards
    Kiran

  • "qmasterd not running" - how this happened and what we did to fix it.

    For this with the message "qmasterd not running".
    This may be of help to those of you who are unsuccessful in
    • initialising qmasterd
    • can't sucessfully 'START' qmaster from the system preferences panel
    • can't start qmasterd from the shell or the startupitems
    • can't establish a cluster in qmasteradmin.app
    • etc etc
    Taste will vary ofcourse.
    SOLUTION: after 2 days of concentrated troubleshooting on this we REINITIALISED the startup disk and RE_INSTALLED THE 10.4.8 O/S and all the applications and replaced (copied) the user data on the primary startup disk.
    Affected H/W:
    • g5 QUAD w/8GB memory and 3.7TB disk (including 2 x 250SATA internal DDMs) with 7800graphic card
    • 30inches HD Cinema display
    HIstory:
    • decided to UPGRADE internal 2 x 250GB SATA1 DDM's with 2 x 500GB sATA2 DDMS because of storage shortage.
    • on advice, we used APPLE MIGRATION ASSITANT to migrate 100% functional OS 10.4.8 startup disk (Macintoish HD) to external FW disk that had a fullfunctional 10.4.8 and apple pro apps as a back up. (This proved to be a very bad error of judgement - a mistake)
    • all data migrated over to external disk sucessfully. System restarted on EXTERNAL DISK and tests (TTPRO) and user apps run - all is ok
    • replaced G5 internal UPPER SATA1 250GB disk with new SATA2 500GB .
    • using G5 startup DVD's , built and initialised OS/X 10.4.8 system on NEW G5 QUAD internal UPPER 500GB SATA2 disk as Macintosh HD.
    • used Apple MIGRATION ASSISTANT to migrate all user and apps and ALL the files and objects from the working EXTERNAL disk we made earlier.
    • reatrted and all looked fine. FCS, SHAKE, MOTION etc etc.. all business apps. UNTIL!..
    • we could NOT get qmasterd to start - msg "qmasterd not running"
    • restarted system many times.. no success.
    ERROR SYMPTOMS:
    • noticed sever apps were corrupted such as WACOM TABLET, LIttle SNITCH and others - these were remidied by reinstallation ... however..
    • console crash reporter contained MANY dumps of qmasterd with general addressing exceptions:
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0nnnnnnn
    also r31 contined the page aligned address of the exception.. and this was ALWAYS different.. so assumed a data driven (parm??) corruption.
    • other symptions include that need to kill -9 (force quit) qmasterd as it would NEVER shutdown.
    WHat else we did to try and fix this:
    • repaired disk permissions (disk utility.app) - no luck...
    • repaired qmaster files disk permissions as per http://www.kashum.com/blog/1152611689 and follwd instructions.. no luck
    • removed QMASTER as per the instructions at http://docs.info.apple.com/article.html?artnum=93234 - reinstalled - NO LUCK - still dumps... ;(
    • removed all the qmasterd parms hoping that would help - no luck
    • used many sugesstions form these discussion, COW etc .. including disconnecting all networks... no luck
    • tried out most of the suggestions including an excellent on from Richard BF at http://www.kashum.com/blog/1152611689 - a trully excellent entry for those with the issue of Unable to connect to background process' error dialog problem.
    • einstalled QMASTER for SHAKE4.1 disks - no luck
    • resinstalled FCS (2 hours later) - no luck
    • restarted on secondary system (the external disk) and QMASTER works fine!
    • reinstalled the original 250GB SATA1 - restarted form it to verify QMASTER was ok.. no dumps existed.
    • reinstalled OS 10.4.8 (OS only) .. no luck
    • used CARBONCOPY (CCC) to make new disk - this failed miserably .. will not use this again ever....
    final outcome:
    • concluded that APPLE MIGRATION ASSISTANT had somehow corrupted some objects in the SECOND GENERATION of copy) from external DISK to new internal 500GB SATA2 drive.
    • threw the towel in and initialised the G5 QUAD's UPPER internal DDM (500GB SATA2) - installed a new OS to 10.4.8 + maint
    • tediously installed every APP including ADOBE CS2 and the CS3 photoshop whilst I mess around calling Adobe locally for an activation code (I always need to do this I dunno why).
    so a great waste of 2 days.
    Summary: when QMASTER works it is terrific.. especially for rendering and transcoding... but when it doesn;t it is dreadful.
    Maybe someone with expertise could shed some light on this.
    cheers
    W
    Hong Kong

    HI Chris, I closed it because:
    • at the time + a few eeks after I posted it, I had few views of it .
    • it is just a reference document to suggest the trouble shooting procedures and headaches we endured to try and rectify it in the view that others may try this path
    • it is in fact old news for some who have FCS 2 now.
    The 'fix" is described in the "SOLUTION" part of my post.
    I agree your symptom you are having wth QMASTER is of great frustration.
    I would encourage you however to perserve to get this working because wehn set up it works very well.
    fwiw

  • Re: ABAP runtime errors DYNPRO_SEND_IN_BACKGROUND

    Hi Experts,
    I'm getting so many dumps related to DYNPRO_SEND_IN_BACKGROUND. I am copying the Error analysis that is showing in the dump analysis.
    Error analysis                                                                               
    During background processing, the system attempted to send a    
    screen to a user.                                               
    Current screen: "SAPMZACTIV " 2000.
    Information on where termination occurred
    The termination occurred in the ABAP/4 program "SAPMZACTIV " in        
    "%_CTL_OUTPUT".                                                        
    The main program was "SAPMZACTIV ".                                                                               
    The termination occurred in line 37                                    
    of the source code of program "<SYSINI> " (when calling the editor 370).
    Could you please help me on this and let me know if you need any further details.
    Thanks & Regards,
    Ravi.

    Hello Ravi,
    You say you are getting this error during  "Error Analysis"?
    Please review SAP Note  1011229 - ST-PI: Corrections for E2E Diagnostics
    DYNPRO_SEND_IN_BACKGROUND is raised.
    However, Miguel is correct that  DYNPRO_SEND_IN_BACKGROUND errors are also addressed by ensuring you
    have applied the basic functions Note  for your SP Level
    Please ensure the following Note that applies to your SP level has been applied to your system:
    1334252     SAP Solution Manager: Basic functions: SP20 and SP21
    1468591     SAP Solution Manager: Basic functions: SP25 and higher
    1172948     SAP Solution Manager: Basic functions
    1405878     SAP Solution Manager: Basic functions: SP22 to SP26
    1373101     SAP Solution Manager 7.1: Basic functions
    1552585     SAP Solution Manager: Basic functions 7.1 SP1
    So check the Basic Functions Note is applied. If it is not, apply it, as it corrects many potential issues.
    If it is on the system, or does not resolve, then apply SAP Note  1011229 - ST-PI: Corrections for E2E Diagnostics
    Regards,
    Paul

  • LOAD_PROGRAM_LOST and  CONVT_CODEPAGE

    Hi Guys! Need very urgent help , may be someone knows this.
    In today our Prod. server has gone mad . In sm21 and st22 are many dumps(> 1000 , and new every 3-5 second) and errors like :
    LOAD_PROGRAM_LOST and  CONVT_CODEPAGE.  From users side the T-codes are reset
    "The program is changed during performance" (i'm see on russian language,It is a literal translation as I shall see in English I shall tell literally). Any help is rewarded. Regards.

    Hi Juan Reyes.
    Yesterday i can't replay to you, the unknow error are on my browser................
    Yes trasport are imported, also the Prepare are start (befor we start Prepare and all ok). In DDXTT we find 460 fields, after some actions we could force will proceed Prepare, (before it's hangs between the phases TOOLIMPD1 and NPREPCRE0 where we can't reset Prepare). All is now good. Thanks and regards.

  • OXM_CBO_STATISTIC COLLECTOR job getting failed

    Hello,
    1.)  The job which is scheduled daily in our sap SRM - EHP 3 system running on Linux OS and oracle 11.2. is getting failed regularly and dumps.
    What is the need for this job?
    2.)  Also , we get a problem in the system when cust runs some queries in the 111 (prod) client - like getting too many dumps (memory related , ASSERTION_FAILED , TIME_OUT's...) and getting ora - 01555 errors regarding old snapshots (undo_retention) deletion time....We get to extend PSAPUNDO when such things happen.
    Our undo_ret value is 43200 secs.
    Should we increase it?
    Undo_size in bytes -  
    UNDO_SIZE
    6.4466E+10
    UNDO_BLOCK_PER_SECOND
    364.346667
    DB_BLOCK_SIZE
    8192

    Hello SS,
    please find the notepad attached with details for OXM job.
    1.)  The job which is scheduled daily in our sap SRM - EHP 3 system running on Linux OS and oracle 11.2. is getting failed regularly and dumps.
    What is the need for this job?

  • Error ODS activation.

    Hi,
    I have problem with activation ODS 0FIGL_O02 (General Ledger - BSEG, BKPF). I process init delta - about 5 mil. records, all is OK but activation is wrong with status 9. Monitor in infopackage is green but in ODS is red and says - error activation. I fill 2 ODS with this infosource (0FIGL_O02 - standard and second is enhanced some fields from BSEG). In ST22 occur many dumps:
    An SQL error occured when accesing table.
    Modul - activate_ods_package
    1889 * INSERT 20020426 (AS-SP08) (IF-insertonly-     else)           
    1890       IF l_insertonly = rs_c_false                          
    <b>>>>>         INSERT /BI0/AFIGL_O0200 FROM TABLE   l_t_insert_req.</b>      
    1892         IF sy-subrc = 0. 
    All tests RSRV are OK.
    In new data table /BIC/..240 are all extracted records but in active data table /BIC/..200 are only about 3 mil records. I try active these ODS separately but it is always wrong. Is this infopackege more big?
    Thanks for any idea, zd.

    Dump occurs here:
    *if datapackage or request changes - mass INSERT
        IF <l_s_insert>-data-request   = l_s_insert-data-request AND
           <l_s_insert>-data-datapakid = l_s_insert-data-datapakid.
          MOVE-CORRESPONDING <l_s_insert>-data TO l_s_adata.
          APPEND l_s_adata TO l_t_insert_req.
          l_s_insert = <l_s_insert>.
        ELSE.
        mass-INSERT from internal table
    INSERT 20020426 (AS-SP08) (IF-insertonly-else)
          IF l_insertonly = rs_c_false.
            <b>INSERT /BI0/AFIGL_O0200 FROM TABLE l_t_insert_req.</b>        IF sy-subrc = 0.
              l_no_inserts = sy-dbcnt.
            ELSE.
              l_no_inserts = -1.
            ENDIF.
            CLEAR l_s_dbops.
            l_s_dbops-requid    = l_s_insert-data-request.
            l_s_dbops-datapakid = i_log_package.
            l_s_dbops-inserts   = l_no_inserts.
            APPEND l_s_dbops TO c_t_dbops.
          ELSE.

Maybe you are looking for

  • What to do when photos can't be read on import?

    This issue has been discussed recently, however, I have tried everything that has been suggested and the issues still isn't solved. I have used LR from LR3 to LR 5.4.  I have had no problems until yesterday when I got the error message that the photo

  • [svn:fx-trunk] 10766: Re-commit compiler errors for other theme' s styles feature.

    Revision: 10766 Author:   [email protected] Date:     2009-09-30 15:55:55 -0700 (Wed, 30 Sep 2009) Log Message: Re-commit compiler errors for other theme's styles feature. If Style metadata has a "themes" attribute, the style is only valid if that th

  • Transferring photo albums from iPhone to new laptop help?

    My old computer crashed all my data is not recoverable. I have some phone albums on iPhone 5 that I want to download to a new computer, but I can't get them to show up in iTunes or iPhoto when I sync my phone. The only images that download are the on

  • "how to get songs to new computer"?

    hey i have got a new laptop i already had all mi songs on ipod ok.. so then i connect it to my new laptop then when it says du wana sync with the new comp i said no.. so then i use podutil to try to copy the songs i did everything right.. when poduti

  • Collapse Issue or Missing Row Problem?

    I am opening a schedule from Project Server 2010 in Project Professional 2010. In Project Server 2010, all rows show in the browser. When the schedule is opened in Project Professional 2010, all of the rows appear uncollapsed (no visible plus signs),