Many Groups

Hi,
I am generating UIX,ADF BC application using JHEADSTART.
I have defined 10 group in JHEADSTART and I get each uix page very wide because JHEADSTART generates Tab for each group.
Is it possible to force JHEADSTART to generate something like subtabs , submenu etc. or something that would works like menu ?
Cezary

Cezary,
For each top-level group, you will get a menu tab generated. You can only change this post-generation.
What we usually do is creating multiple application structure files for each "subsystem", each getting their own menu tab bar, and then we have global buttons to navigate to each sub system.
This way, you do not have to make post-generation switches.
Steven Davelaar,
JHeadstart Team.

Similar Messages

  • How many group policies can be applied to an OU?

    Hi,
    I just want to know about how many group policies can be applied to an OU?
    I have 7 different GPOs but only 2 or 3 are applied. How can I troubleshoot this problem?
    reg
    A

    GPOs are actually applied by users or computers. Each object can process 999 GPOs. If you have GPOs not being applied, it most likely is a scoping issue.
    Check out this guide and let me know what you find:
    http://deployhappiness.com/top-10-ways-to-troubleshoot-group-policy/
    If my answer helped you, check out my blog:
    DeployHappiness. Subscribe by
    RSS or
    email. 

  • How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

    I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

    You can see the memory usage on the about:memory page.
    You can open about: pages via the location bar like you open a website.

  • Group Text Messaging: Too many Groups cannot find information

    I have so many variations of text messaging groups it is hard for me to search through all of them to find important information. Is there a way for group messages to be sorted under the individual person's name instead of a unique group?

    They are sorted based on most recent. But you can search a person's name at the top search bar and that should pull up all of the group texts that they are in.

  • How to add user to one to many groups in Active directory using powershell

    Hi  All
    I am working on a script to create a user and based on user type i would like to add that user into 2 to 3 groups . At the moment i have 3 groups e.g domain users, Developers, tester, 
    $NewUser = Read-Host "New Username"
    $firstname = Read-Host "First Name"
    $Lastname = Read-Host "Last Name"
    $NewName = "$firstname $lastname"
    $Group = "Dev"
    New-ADUser -SamAccountName $NewUser -Name $NewName -GivenName $firstname -Surname $lastname -displayname $Newname -UserPrincipalName $[email protected] -Path "CN=Users,DC=mydomain,DC=local" -AccountPassword (ConvertTo-SecureString -AsPlainText
    "Password" -Force)  -Enabled $true 
    Add-ADGroupMember -Identity $Group  -Members $NewUser
    I am not sure how to give user(sys admin) this option of choosing 1 or more groups while creating new user

    modified this line Add-ADGroupMember
    -Identity ([string]$h[$group])
    -Members
    $NewUser
    and
    now getting the error message Add-ADGroupMember : Cannot find
    an object with identity: '' under: 'DC=mydomain,DC=local

  • Export illustrator to photoshop: too many groups?

    We've designed a website in illustrator, but the web developer company wants us to deliver the design in photoshop. No problem, we do that more often, but now we have this problem… The design contains a lot of items, and to keep things clear we divided all the items in groups with their own name. When exporting to photoshop, it should keep all those groups and names. But on some pages there are groups in groups in groups in groups, etc. I found out that photoshop is only able to cope with not more than 3 groups in each other, the rest of it is flattened! The only solution I see is to ungroup everything in illustrator, export to photoshop, and than regroup and rename all over again. But this will take a lot of extra work! At least a day. I was hoping someone maybe has an idea to solve this problem easier and quicker? Thanks!

    Could you export in two steps then merge the two files in PS? This would keep your groups intact. Little more work, but not as much as redoing the groups in PS.

  • Optimizing mxml component having so many group

    Hi,
    I am stuck in critical issue which I have to fix within today. I have a view component or mxml component having 50 group.
    After slashscreen Its taking too much time and memory to load first view and GUI stuck for few minutes.
    There is any solution of this issue.I want to queued all group creation according to requirement I want to load it.
    If there is any alternate way then it will be helpful to me,
    Any help will be appreciated,

    I was going to look at the code for your Groups to see if I could suggest a quick way of refactoring the app to not all get instantiated at once.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.<http://www.adobe.com/>
    Blog: http://blogs.adobe.com/aharui

  • My daughter cannot remember her passcode for her iPhone 5. She needs a phone number that is stored in the phone and cannot remember her passcode. we have tried many groups of numbers and now we are locked out for an hour each time we put in the wrong pass

    My daughter is out of the country until May. She did not take her iPhone 5 with her. Now she needs a phone number that is stored
    in the memory and cannot remember her passcode. I have tried all of the possibities that she e-mailed , but none of them work
    and now I am locked out for an hour each time I enter an invalid passcode. Help? How can I get around this to access the phone?

    Follow the instructions at http://support.apple.com/kb/HT1212

  • If you cannot sync contacts this might be the problem...too many contact groups

    I have a Centro and MAC book and was trying to use ISync and then Missing Sync to sync data. In both programs the contacts would not sync but all else did just fine. I have many contacts but did not need all of them on my phone so I organized them into groups in the address book, with one group being a list of the current contacts I wanted on my phone. With MissingSync the program will only sync a certain number of groups, although I had more than that number I didn't think it mattered because I was only trying to sync the one group. It matters. Even though in the Missing Sync conduit setting the group was listed and I only checked that group off to sync - nothing would sync. 
    The solution was to save a back up of my address book and then delete all my contact groups except the one I wanted to sync. POOF! It worked. I am not sure exactly how many groups would work but if the priority is to get a certain number of contacts, not all, on your phone and you have a lot of groups, maybe this strategy will work for you. If you are using ISync, since the problem was the same for both programs, maybe this would also be the solution in ISync. 
    What led to this ah-ha moment was a forum moderator at MissingSync suggesting I create another user on my computer with administrative capability, create a few test contacts and then try to sync. This did work, the contacts did sync.
    I hope this may be of help to someone and possibly save you a lot of time.  Good luck!  
    Post relates to: Centro (Verizon)

    Thank you for the information

  • How can I see how many times my song has been downloaded?

    I have a couple of songs for sale on iTunes and wonder if it's selling at all. Can I check?

    Peter,
    Workspaces and groups can be confusing - apologies that it was not clear.
    Perhaps some background as to why I described it that way may help.
    BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
    So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
    Hope that explains it.
    Phil

  • How do I restore Groups to Contacts from time machine?

    How do I restore groups to Contacts using time machine?  I somehow managed to duplicate many groups and contacts in Contacts, so I deleted everything and tried to restore them using time machine backup  from a few days before.  It restored all my contacts, but none of my groups.  If you select a group and click restore it will restore all the contacts in the group, but not the group itself.  I had many groups with many contacts in each and would really prefer not to do this manually.  I can see the groups in the time machine backup, but cannot figure out how to restore them.  I know from researching online that with Address Books and previous operating systems you could go to ~Library/Applications Support/AddressBook  and restore the whole file, but either this operating systems hides the necessary files or Contacts is set up differently than AddressBook was.  I am using OS 10.9.5 and Contacts version 8.0 on a MacbookPro 13 inch mid 2010.

    Here is what I have tried:
    1. Finder>Go>(Option)Library>Address Book(highlighted)with files showing in right column. Opened Time Machine and Address Book folder is there. Tried to go back to several previous dates from several months ago. None will highlight in order for the Restore button to light up.
    2. Finder>Mac HD (under Devices)>(Option)Library>Address Book (same as above). Again, cannot go anywhere back in time to highlight a date for Restore button to light up.
    Note: I was able to use Time Machine to restore my Contacts with no problem. However, they are All Contacts only and did not restore my Groups. I do know how to make groups again and highlight and drag them back, but wanted to see if there was a way to restore the groups. I will post another question as to why my Time Machine won't let me restore the Address Book as well as the Contacts. Thank you for your time and patience.

  • Address book groups: can't customize contacts with multiple email

    I have many groups setup in address book and frequently like to use them. Additionally, several of my contacts assigned to groups have multiple email addresses. Is there a way to specifiy which email address of a contact's associates itself with the group? I have not been able to figure this out and am aggravated when I send out personal emails to my friends' work addresses, much to their chagrin.
    Thanks in advance for the help and ideas!
    -Brian

    chesternd08 wrote:
    Thanks Lanny, but that is related to an iCloud issue. My issue is not iCloud related at all, rather when I use a group on any platform.
    I am hoping there is someway to set a default email to a group for a contact having more than one email? I haven't seen any other forums discussing that issue, but if you are aware of one I would very much appreciate your help. Thanks!
    Then you would use the, "Edit Distribution List" from the Address Book's Edit menu. Select the applicable group and then select which email address that you want the group to use.

  • How can I paste an AP Group into a WLC so I don't have to do it by hand?

    I'm creating a new AP group across a WiSM farm.  All WiSMs will get the same AP Group.
    Problem is, the interfaces were created with spaces, such as "vlan 90".  Other interfaces, created with names, such as "MyWLAN" will paste in.
    (controller) >config wlan apgroup interface-mapping add Wireless 10 MyWLAN  <---- This one pastes in just fine.
    (controller) >config wlan apgroup interface-mapping add Wireless_MOB3 2 vlan 90  <---- This one doesn't like the space between "vlan" and "90"
    HELP:
    Special keys:
      DEL, BS .... delete previous character
      Ctrl-A  .... go to beginning of line
      Ctrl-E  .... go to end of line
      Ctrl-F  .... go forward one character
      Ctrl-B  .... go backward one character
      Ctrl-D  .... delete current character
      Ctrl-U, X .. delete to beginning of line
      Ctrl-K  .... delete to end of line
      Ctrl-W  .... delete previous word
      Ctrl-T  .... transpose previous character
      Ctrl-P  .... go to previous line in history buffer
      Ctrl-N  .... go to next line in history buffer
      Ctrl-Z  .... return to root command prompt
      Tab, <SPACE> command-line completion
      Exit    .... go to next lower command prompt
      ?       .... list choices
    Does anyone have a trick to get this to paste in?
    Thanks in advance

    you can take a back up of the config file and edit that. it maybe cleaning. only downside is that will take a reboot when you download the edited config file.
    how many groups to want to create? maybe gui may prove more efficient in the grand scheme of things.

  • How can I see in which Group the workspace has been created ?

    Hi,
    The BeehiveOnline Tutorial on slide 7 shows that Workspaces are created within a Group.
    Also the Group Administration screen suggests this as I can indicate that user ABC gets the role 'Workspace Creator' in one Group but same user ABC does not get the role 'Workspace Creator' in another Group. (what else is the purpose of this role within Group Administration)
    But when I created my workspace, the system did not ask in which Group I wanted it to be created, neither can I see in the Settings of the new Workspace to which Group it belongs.
    Can you please help ?
    Thanks,
    Peter

    Peter,
    Workspaces and groups can be confusing - apologies that it was not clear.
    Perhaps some background as to why I described it that way may help.
    BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
    So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
    Hope that explains it.
    Phil

  • Select one record for each member of the group

    Hi,
    am having a table where in i will be having data for so many group members. i need to fetch data for a particular group members whose number of rows of data may be more in numbers (but i want only one row of data for each member of the group)
    here is the query for fetching all rows of data
    select RI.RESOURCE_NAME,TR.MSISDN,TR.ADDRESS1_GOOGLE, TR.MSG_DATE_INFO, FROM TRACKING_REPORT TR, RESOURCE_INFO RI
    WHERE TR.MSISDN IN (SELECT MSISDN FROM RESOURCE_INFO WHERE GROUP_ID ='1' AND COM_ID=2 ) AND RI.MSISDN=TR.MSISDN
    order by MSG_DATE_INFOoutput of this query is...
    >
    ddd     12345          13-Mar-10 19:43:03
    eee     54321     Tamil Nadu, India      13-Mar-10 19:39:48
    ddd     12345          13-Mar-10 19:32:58
    eee     54321     Tamil Nadu, India      13-Mar-10 19:30:07
    ddd     12345          13-Mar-10 19:23:08
    eee     54321     Tamil Nadu, India      13-Mar-10 19:20:14
    fff     98765          13-Mar-10 19:19:22
    ddd     12345          13-Mar-10 19:13:01
    eee     54321     Tamil Nadu, India      13-Mar-10 19:09:50
    ddd     12345          13-Mar-10 19:02:56
    eee     54321     tn,ind      13-Mar-10 18:59:49
    ddd     12345          13-Mar-10 18:53:08
    eee     54321     tn,ind      13-Mar-10 18:49:50
    ddd     12345          13-Mar-10 18:42:56
    eee     54321     tn,ind      13-Mar-10 18:39:50
    ddd     12345          13-Mar-10 18:33:00
    eee     54321     tn,ind      13-Mar-10 18:29:50
    ddd     12345          13-Mar-10 18:22:54
    eee     54321     tn,ind      13-Mar-10 18:19:50
    ddd     12345          13-Mar-10 18:12:56
    eee     54321     tn,ind      13-Mar-10 18:09:50
    ddd     12345          13-Mar-10 18:02:54
    eee     54321     tn,ind      13-Mar-10 18:00:02
    fff     98765     Tamil Nadu, India      13-Mar-10 17:59:26
    fff     98765     Tamil Nadu, India      13-Mar-10 17:54:26
    ddd     12345          13-Mar-10 17:52:56
    eee     54321     tn,ind      13-Mar-10 17:49:50
    fff     98765     Tamil Nadu, India      13-Mar-10 17:49:25
    fff     98765     Tamil Nadu, India      13-Mar-10 17:44:26
    ddd     12345          13-Mar-10 17:42:56
    >
    from this output i want only one latest record for each member(ddd,eee,fff). i.e
    >
    ddd     12345          13-Mar-10 19:43:03
    eee     54321     Tamil Nadu, India      13-Mar-10 19:39:48
    fff     98765          13-Mar-10 19:19:22
    >
    how to modify the query to achieve this...?

    Hi,
    This is not giving the result which i want...
    table is
    CREATE TABLE TRACKING_REPORT
      ID               NUMBER,
      MSISDN           NUMBER(12)                   NOT NULL,
      X                NUMBER(15,8)                 NOT NULL,
      Y                NUMBER(15,8)                 NOT NULL,
      TIME_STAMP       DATE,
      MSG_DATE_INFO    DATE                         DEFAULT sysdate,
      ADDRESS1_GOOGLE  VARCHAR2(400 BYTE),
      ADDRESS2_GOOGLE  VARCHAR2(400 BYTE),
      ADDRESS_MLINFO   VARCHAR2(400 BYTE),
      REQ_ID           VARCHAR2(30 BYTE)
    CREATE TABLE RESOURCE_INFO
      RESOURCE_ID    NUMBER,
      MSISDN         NUMBER,
      RESOURCE_NAME  VARCHAR2(25 BYTE),
      ADDRESS        VARCHAR2(100 BYTE),
      COM_ID         VARCHAR2(20 BYTE),
      ADMIN_ID       NUMBER,
      TIME_STAMP     DATE                           DEFAULT SYSDATE,
      GROUP_ID       NUMBER
    )

Maybe you are looking for