Many iMovie to DVD Questions

OK, guys, I'm in over my head here.
Working on the 3-night project shot last week. Will be making DVDs out of this project. Shot with HV30 in 30P mode, last night in Cine, too. Film noise/grain PLUS not best audio first 2 nights because shooting from too far away & bad lighting.
1. For making DVDs, is it best to use iMovie HD6, 08, 09 (bought, but not installed yet), (or even FCE4-no experience with this at all, but have access)?
2. Every time I've used iMovie HD6 or 08 in the past, when it gets to iDVD 08 it turns my Widescreen footage to Standard (I'm playing it on a Standard TV & want letterboxing) although it's Widescreen when testing iDVD project before burning. How do I keep it Widescreen??? This has been driving me crazy for awhile.
3. As for sound, I tried boosting in iMovie HD 6 and it didn't sound that great. In iMovie 08, I remember you can boost up to 200% and normalize. Does that turn out better and is it worth the tradeoff if the final product (DVD) doesn't have as good picture quality as HD 6? For last 2 nights, I also recorded audio on a digital voice recorder. Is it worth it ( and HOW TO do it, no clapboard used) to try to use this audio in conjunction with the video shot and not the audio from the camcorder?
4. Also, is tonight the time to upgrade and install 09? Or is it going to mess me up too much mid-project and DVD quality not as good and I should wait?
5. Any plug-ins to reduce film noise/grain?
6. Finally, what settings in iMovie 08 & 09 are best for exporting when final product is DVD? Been very confused with the Apple Forums discussion boards threads on "deinterlacing is not deinterlacing."
Phew! Sorry for so many questions. Anxiously awaiting the new iMovie 09: The Missing Manual!
Thanks, Deborah
PS crossposting in both iMovie HD 6 AND iMovie 09 Forums.

Hi
+1. For making DVDs, is it best to use iMovie HD6, 08, 09 (bought, but not installed yet), (or even FCE4-no experience with this at all, but have access)?+
For doing a DVD I would only use iMovie HD 6 or FinalCut any version.
If You are not use to FinalCut this can be a *big step up in learning* but when done
very revarding.
+2. Every time I've used iMovie HD6 or 08 in the past, when it gets to iDVD 08 it turns my Widescreen footage to Standard (I'm playing it on a Standard TV & want letterboxing) although it's Widescreen when testing iDVD project before burning. How do I keep it Widescreen??? This has been driving me crazy for awhile.+
Not sure but I would make a WideScreeen project in iMovie HD 6 and when done close
iMovie open iDVD and select a 16x9 project then import the iMovie movie project into iDVD (icon with a Star on it)
(I never use the "Share(Export to iDVD" function in iMovie
One can force Letterboxing by starting a 4x3DV project, then import a still photo that
locks it to this. Now import Your 16x9 video and it will be forced into letterboxed 4x3.
Burning this as a 4x3 DVD should keep it letterboxed.
+3. As for sound, I tried boosting in iMovie HD 6 and it didn't sound that great. In iMovie 08, I remember you can boost up to 200% and normalize. Does that turn out better and is it worth the tradeoff if the final product (DVD) doesn't have as good picture quality as HD 6? For last 2 nights, I also recorded audio on a digital voice recorder. Is it worth it ( and HOW TO do it, no clapboard used) to try to use this audio in conjunction with the video shot and not the audio from the camcorder?+
To increase audio volume -
• Select video clip
• Goto Advance then down to Extract Audio
• Increase this to 150%
• Select original video clip and restore audio to 150% too
Now You got 300%
If You need more then copy the audio clip and paste it ontop of itself as many time as needed
Quality. Increasing = more audio problems.
alt. is to export out audio (as QT .aiff) and adjust it in an another program as
"Audacity" (free) or in SoundSoap™ if You got ayn this (or by all means use GarageBand)
Sync.
To sync external audio recorders - Tough often near impossibly. The device has
to have a TimeCode to be able to keep sync. There are no easy solution as I know of.
+4. Also, is tonight the time to upgrade and install 09? Or is it going to mess me up too much mid-project and DVD quality not as good and I should wait?+
I would not - neither iMovie'08 or 09 will work optimal if You want a DVD as result.
I NEVER change anything Mid-project (Mac OS, QuickTime or program version)
+5. Any plug-ins to reduce film noise/grain?+
Don't think so but by exporting out or using FinalCut there are good tools in
QuickTime, GarageBand, Audacity, SoundSoap and FinalCut
Take a look into
Stupendous software http://www.stupendous-software.com
GeeThree http://www.geethree.com
cf/x. http://www.imovieplugins.com
Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
http://www.imovieplugins.com/fxhome.html
+6. Finally, what settings in iMovie 08 & 09 are best for exporting when final product is DVD? Been very confused with the Apple Forums discussion boards threads on "deinterlacing is not deinterlacing."+
DE-interlacing is not the problem - It is that both 08 and 09 delete every second line
when going to iDVD. Sharpness is degraded. iMovie HD or FinalCut doesn't do so but
let You have full quality.
Phewww Yours Bengt W

Similar Messages

  • I have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    i have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • Best way to burn iMovies to DVD

    I am looking for advice on the best way to get iMovies onto DVD. I have spent a lot of time reviewing discussions & answers already posted... probably too long as I am not getting anywhere!
    I have built a movie in Movie 11 from AVCHD files (1080i) shot on a cannon SD card camera. This has been shared as a Large movie to me Apple TV1.. looks great.
    I then shared the project to iDVD. The DVD produced was very poor. 'Jaggies' is a description I have seen in the discussions. Static horizontal lines are broken up & appear to move. I also included a pile of photos on the DVD as a slideshow. Just dropped in 100 high res Jpegs. Again, these appeared as very poor quality.
    Exactly the same quality when using DVD+, DVD-, Memorex or Sony (now trying Verbatim).
    I have tried dropping the movie into iDVD from Finder rather than sharing from iMovie. Same quality issue.
    If I play the movie on my mac straight from Finder... it looks great. If I import it into iDVD (by sharing from iMovie or dropping in the file from media browser, you can see on the preview the jaggies are back
    I created a disk image of the movie & burned to DVD... disk wouldn't play in the DVD player..
    So, the question. What is the best way to get a movie produced in iMovie onto a DVD in terms of image quality. Have I missed a step in burning the disk image to a DVD?
    Ideally, I don't want to use third party Apps. I have downloaded the trial of FCP. Will this handle everything in terms of movie production including DVD burn? I don't want to spend this sort of money, but if needs must..
    Really grateful for any help & sorry for asking the largely the same question again!

    Hi
    Fully understands Your dilemma - BUT
    • iMovie'08 to 11 - Can not deliver 100% full quality over to iDVD or any DVD authoring program as they all discard every second line in the picture when going from Event's to Project's. NO medicine known to me to heal this.
    I use iMovie HD6 or FinalCut - as they can deliver 100% - interlaced SD-Video
    • Video-DVD is as standard only - interlaced SD-Video and can never be any better
    I created a disk image of the movie & burned to DVD... disk wouldn't play in the DVD player..
    • You must use - Disk Util tool - to do this burn from .img file right ! Else the structure on Your DVD will not be a Video-DVD but a Data-DVD and as this it will NOT play back on any DVD-player.
    I have downloaded the trial of FCP. Will this handle everything in terms of movie production including DVD burn?
    • Yes - but not in as elegant form as iDVD are able to produce. But I'm told that the full 100% interlaced SD-Video quality is transferred over and used - so Your MOVIE will look as good as it's possibly. FOR FULL information and clever thoughts about this - ASK IN - FinalCut Pro-X forum - they know - I go on hear-say.
    Yours Bengt W

  • IMovie to DVD transfer

    I can successfully transfer video clips to iMovie and subsequently to DVD.
    However, I have a large number of 35 mm slide presentations with soundtracks and I wan to transfer these to DVD. I can scan the slides, transfer them to iMovie, add the soundtrack and show the result on my iMac. I can also plug the computer into my digital TV and show the presentation. Both of these methods produce perfect results.
    The problem arises when the iMovie is transferred to DVD. Using the same method as for video clips the result is very poor with a fringed and jagged image. I wonder if this is a compression problem but cannot understand why it only happens when slides are the image source.
    Can anyone suggest a solution, please?

    ans51 if you are still "listening" ...
    As you can see, you did'nt get much feedback to your question ... this addition to my original suggestion may not help either, but ...
    First, let me say that I do not have iLife 09, but from previous inquiries dealing with iMovie 04/DVD 04 , it was suggested to ignore the "prompt" to RENDER when you were presented with it sometimes thru the process. I do not know if you are presented with such an option in iLife09, but I thought I'd shared it with you. The problem with jaggies has been with us for as far as I can remember, hence I looked for an alternative and a dedicated software spoken of earlier. I choose the 1920 x 1080 format, which I project via a 1920 x 1080 projector on a 2.5m screen, and the quality is as good if not better that 35mms slides.
    Finally, let me stress that iMovie is perhaps not designed to do what you want to do, although I think it must be one of the best software on the market for the purpose of editing DV and HDV materials as long as you are not interested in fancy tricks, which I is my case.
    Cheers
    jc

  • Export iMovie to dvd

    Is it possible to export/copy productions in iMovie to DVD or blue ray
    Thanks
    Mick

    Hi
    If You have a new Mac - Then No - as Apple don't supply iDVD any more and they don't sell it either
    If Old Mac - then You've got iDVD program on this to Author material as a Video-DVD.
    • in iMovie - Share to Media Browser - and as Large or Medium - Not HD as the resulting DVD will lose in quality.
    • in iDVD import Your movie from the Media button / Videos
    Else
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • What is the easiest way to burn imovies onto DVD's.   I want to burn more than one movie onto DVD as I create.    Can I continue to burn onto the same DVD as the movies are created?

    What is the easiest way to burn my imovies onto DVD's?    I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full!    Is this possible?

    You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

  • I'm trying to set up an iPad for work and the apple id I was trying to use came back expired. I set a new password and then it said it was invalid. Now I'm locked out for too many tries answering security questions that I don't remember setting up. Help!

    I seem to be stuck in apple ID ****. First the password was expired only two minutes after I finished setting up the account and then the new password was invalid.  I don't know what to try next but this is making me crazy.  And I'm locked out for eight hours for too many attempts at answering questions that I never set up in the first place. I don't know what gives but something is way off. I need to set up this iPad for work but I can't get past the login.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • What app do I need to burn imovies to dvd

    I have a new imac - no internal superdrive- I bought a stand alone. I need to burn imovies to dvd. Idvd no longer works with new imac, I purchased Toast - that does not work, I downloaded Free DVD creator - that does not work either. I have been following the procedures but the dvds can not be played on my tv dvd player.

    Use Verbatim like babowa suggested and burn at the slowest speed available. That will give you the best qualtiy video DVD. If you find you want to create a video DVD with more style than what Toast provides consider using iDVD.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?

  • My iPhoto app has disappeared and my iMovie has a question mark through it!?

    I went to go onto my iphoto app on my macbook pro today and realised it was missing and imovie has a question mark on the app and won't let me open it can any help me get it back please? I haven't messed with it nor deleted it so haven't got a clue where it has gone or what's happened. I don't want to pay for it as its not cheap and I had it for free on the mac so don't see why I should by it.
    Thanks in advance

    I've managed to get them back for all the other people who are having the same problem go onto the app store on your Mac and once it loaded click 'Purchases' with a little price tag by it and look for it in the list and it should be there for you to install it again for free

  • I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    Did you do the moving of the image file in the Finder or do you have a reference library as asked by Larry? In either case moving the files is a recipe for disaster as you've found out. You must either move the files back to their original locations or try to get those photos back into iPhoto as follows:
    1 - Find the folder you moved the files into and COPY it to the Desktop.
    2 - in iPhoto delete the photos that you're having the problems with as you normally would even though you can't see see them. Also delete all the photos that are in the folder you moved the other files into.
    3 - drag the folder on the Desktop into iPhoto to import them as one event. If you get a duplicate warning I'd let it import the duplicate and use Duplicate Annihilator to find them so you can cull out the duplicate you don't want.
    Other than that you might have to start over from scratch as follows:
    Creating a new library while preserving the Events from the original library.
    1 - Move the existing library folder to the desktop
    2 - Open the library package like this.
    3 - Launch iPhoto and, when asked, select the option to create a new library.
    4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    OT

  • How do I burn imovie to dvd on my macbook pro that can be read by dvd player to watch on my TV.

    How do I burn imovie to dvd on my macbook pro that can be read by dvd player to watch on my TV.

    Purchase iLife 11  (includes iDVD) on disk.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219
    Yes, there are programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.

  • How to burn an iMovie to DVD without losing quality? I have iMovie 10.0.5 and imac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this?

    How to burn an iMovie to DVD without losing quality?  I have iMovie 10.0.5 and iMac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this problem? I have tried the apps BURN and DVD Creator for MAC. I need to finish this DVD asap and becoming more and more frustrated. Why would Apple give us iMovie and not provide us an app to burn it to a DVD and / or take away the iDVD?
    Alicia McGinnis

    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • Title resolution degraded when burning an iMovie to DVD

    When burning an iMovie  to DVD via iDVD using the Share menu, the resolution of the titles is significantly degraded on the DVD whether seen on my computer screen or on my HD (1080) TV.  As a result, while the video quality itself is quite good, the end product overall is inferior owing to low resolution titles.  I have not found a way to fix this.  Is there something I'm missing, or am I stuck with this inferior result?

    Part of this is going from 1080P to 480P.
    But if you are using SHARE/iDVD, try using SHARE/MEDIA BROWSER in Large size. Then, in iDVD, drag the movie into your project from the Media Browser.
    Note: You can experiment with sharing in 1080P if your source material supports it. I have found personally that Large works for me.

  • IMovie does not "share" to iDVD. How can i burn an iMovie to DVD?  I do have a copy of iDVD on my Mac

    IMovie 11 does not "share" to iDVD. How can i burn an iMovie to DVD?  I do have a copy of iDVD on my Mac

    My advice, keep iDVD on your Apple Mac as it is a great software and let's hope Apple will introduce it again in imovie 10.  Since you may have imovie 10.0 (2013) up-dated from imvovie 9.0 (which included iDVD for burning your home made films on imvoie 9.0,)  you can proceed as follows to burn it on a DVD:
    a) your film is completed on imovie 10.0.  Under share transfer it to "Theatre" (default).
    b) open iDVD  and drag the film ex "Theatre" on the space "movie" of i.DVD. 
    c) Inser a DVD and clic on "burn"...
    It worked for me.

Maybe you are looking for

  • PROBLEM IN SENDING MAIL TO POSITIONS THROUGH SEND MAIL STEP

    Hi Experts, I am facing some problems in sending mail to positions from the organization structure from the send mail step.When I am using user as the recipient type it is working fine...but when i am choosing S position as the recipient type it is g

  • Error "cannot access com.sun.java..."

    edit i mistyped in the topic name, i mean to say "com.sun.j3d..." I've set myself up using JCreator, installed j3d, j2sdk, and jdk. Tried a few test programs to make sure everything was working (a basic hello world and my chess game i created my juni

  • How can i use the commapi in an signed applet

    I have a simple code of listing all system ports, the code works in a simple program but when I use it in a signed applet i have this error : java.lang.NoClassDefFoundError: javax/comm/CommDriver Thank you for your help

  • CORE4005: Internal error: unable to create JVM

    Hi, Can't start-up the domain domain1 after I've installed AppServ 7.0 for W2000. This is the installation log and the admin-server instance log file with the debug set to FINEST. Install log : INFO - Start core server configuration. INFO - Domain su

  • NoClassDefFound error after install OC4J PDK Standalone.

    Hi I have just installed the Standalone OC4J with the default Portal Dev Kit configuration - I followed the install instructions. Unzip the downloaded file, go to the install dir/j2ee/home , run java -jar oc4j.jar -install . I then got error Exceptio