Many Keytags Missing After Upgrade to PE10

I had put keytags on all of my photos in an earlier version of PE (not sure which one) but after I upgraded to PE 10, many of them were no longer there. I am now in the process of getting keytags on all of the photos again. I'd like to upgrade to PE 12 but don't want to have to go through this again. If I upgrade will the keytags be converted to the new version?

HI,
The tags are written to the organizers catalog not to the image files. If you converted the old catalog to the version 10 catalog then the tags should have been retained.
It is possible to write the tags to the image files by using File -> Write Keyword Tags and Properties Info to Photos
How did you change from the old version to version 10?
Brian

Similar Messages

Many apps missing after upgrade to OS 5 on my iphone4.

Hi. I just installed the new OS 5 on my iphone 4. I used my MacbookPro and itunes. Now my apps (especially games) are missing from my iphone by they appear to be on itunes. When I synch, it is still the same and they don't appear on my phone. Help !

I had a horrible time upgrading my iPhone 4 to iOS 5. After numerous errors, I had to do a restore instead. I shift clicked restore and selected the firmware file.
Once the firmware installed, I was asked to select my backup file, which I did. Once this had restored, like you I appeared to be missing a large number of applications.
I then restored again. This time, I realised that whilst the restore claimed to have completed, it hadn't actually finished synching. Since you can now use your phone while it syncs, this gives the illusion that everything has finished.
I would advise restoring again, but this time leave it for a while. You should get a message onscreen telling you that it is synching the apps (then the music). The first time round, I didn't see the message about apps which is why I didn't know!

Many apps missing after upgrade from iPhone 3gs to iPhone 4?

Hi - I'm trying to troubleshoot for my dad who was lucky enough to receive the iphone 4 today. He says the majority of apps didn't transfer from his iphone 3gs. I did a screen share with him and he's right. The apps are on the old iphone 3gs but not showing in his apps library or on the new phone. Anyone else experiencing this? He did a full back-up and had already upgraded his iphone 3gs to the iOS4 software. Any help would be greatly appreciated!

I had this issue but found the cause and solution.
When upgrading from the iPhone 3GS to the iPhone 4 (initial connection of new phone to iTunes) and AT&T moved my phone number from the 3GS to the 4; the 4 told me to power cycle (and I think unplug). Since a power cycle causes the phone to disconnect & reconnect to iTunes, and since the first sync after plugging the phone in always does a backup, it did a backup of the blank phone settings (no apps), and therefore wiped out the checked apps in the Applications tab of iTunes. (Note: The apps' data did exist, so checking an app, syncing, and then running the app showed the data. Good news: Data's still there. Bad news: Any apps you skip will hold their old data, as opposed to when you delete an app and it removes the app data for you.)
After hitting Erase All Content and Settings on my old 3GS and realizing it only took a minute and not an hour like the original iPhone did running OS 2 or 3, and seeing how smoothly its reinstall went (loaded settings, rebooted phone, and loaded apps OK), and more importantly that iTunes kept the old final 3GS backup and used a new backup for the new iPhone 4, I tried it on the iPhone 4: I hit Settings, General, Reset, Erase All Content and Settings, then connected the phone. It asked which settings to restore, found my old phone backup (used date/timestamp to find right one); it then loaded settings (a few minutes), rebooted, and went right to installing apps. My phone was fine after that - all apps and folders were restored.

BB App World Icon Missing After Upgrading to OS 4.0.0.65

Hi,
i'm using blackberry bold 9780.
after upgrading to OS 4.0.0.65 my BB app world was missing. i have tried to reboot and re-install the app world but it doesn't work...
appreciate that someone can resolve this..
Solved!
Go to Solution.

Hi liedia
Welcome to BlackBerry Support Forums
Try this Knowledge Base :
KB29422 BlackBerry App World icon is missing after upgrading to BlackBerry App World 4.0.0.63 to 4.0.0.65
In addition who is your Carrier ? please edit your profile and remove your mobile number .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Top menu bar is missing after upgrading to yosemite

Top menu bar is missing after upgrading to yosemite

The Library file has been hidden for some time now. So not surprised you are confused upgrading from Snow leopard.
The easiest way to view this folder is to use the Go menu and press the alt key. This exposes the folder in the list.
Hope this helps.
PJRS

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

Access Sequence JEXC missing after upgrade to EHP7

Dear Experts,
we are facing an error while saving excise invoice through transaction J1IIN in development system after upgrade to EHP 7, Access sequence JEXC missing ( ) Message no. VE306, could you please suggest to find out solution.
Regards,
Amit Anasane

Dear All,
Thanks for helping with your valuable suggestions, finally i got solution of it,
The root cause of this problem was the change in the table T682I by theEHP7 upgrade.The fields KOTABNR has been changed from NUMC(3) to CHAR(3).With NUMC type the wrong statement works anyway.With CHAR type it retrieves no records. thus creating this error message, so it was a pure ABAP programming error. i am closing this discussion once again thanks to all.
Regards,
Amit Anasane

BACK UP DATA MISSING AFTER UPGRADE

Hello again
I am posting again my problem , maybe this time I can get some more help..
I was using an older Itunes and 4.1 os on Iphone. I backed up iphone and restored it (TWICE) to check for data and eveything was there, after upgrading Itunes and OS to 5.0.1 , I tried to restore from the Previous Backup but lots of data was missing (contacts, pix,videos,songs,passwords) . What happened here ?
I found 4 backup folders with dates : 20/jan/2012 (1 folder ) , 23/jan/2012 (2 folders) and 26/jan/2012 (1folder) <---date of upgrade.
(I forgot to mention that when i was upgrading the OS , I wasn't prompted to do anything by Itunes, Itunes upgraded and backed up the phone automatically.)
I looked inside those folders and found out that the folders from 20/jan and 23/jan contain identical info. but the one from 26/jan is different !!!!!
1)does that mean that the original backed up info is still there but not ported over to the new OS ?!!!
2)Is there anything in particular that I should look for in the backup folders ?
3)assuming the original backed up data is still there , how do we make sure it is completely transfered to the new OS ?
Regards

That sounds like a more complicated problem within PC Suite...Maybe you should contact Nokia directly to see if they can come up with a solution for this.
www.europe.nokia.com/contactus
There you´ll find a detailed selection of your country.
Don´t forget to keep us informed on this!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Spool list recipients of BG Jobs missing after upgrade

Hi all,
After upgrade from 4.7 to ECC 6.0, the Spool list recipients of BG Jobs were deleted/missing from the BG Jobs. Do anyone have any idea on how to resolve this?

Hi Sandeep,
How the settings in SPAD affects the configuration in BG Jobs...I mean that even the configurations are missing from the BG Jobs...

User account missing after upgrade to Yosemite?

I have a mid-2010 iMac which up until recently I had two user accounts on for general use and one for music (Garageband, Logic and audio files etc). After upgrading to Yosemite, this separate user has vanished. I'm left with my original admin account, and a guest login. If I search for any of the files using spotlight, they do show up, but if I try to open them I get the message "you do not have permission to open this document". Also I had folders on the desktop of the music account which contained files, these folders show up in a search but are listed as empty? The files themselves are 'blank white sheet' icons as if they have no application.
I would assume this is a lost cause if not for the fact that my hard drive (more than half of which was taken up by the 'music' user) still reads as pretty much full up. So have I wiped all this forever?
Thanks in advance,
Dave

retina MacBookPro mid2012. Clean install of OS X Yosemite 10.10
I'm randomly missing an account at login screen after reboot.
Sometimes I can fix it with booting into my initial account 'Kevin' (userid 501) and then changing to different login 'Christina' (userid 502).
But if I log out from my account, the second account is missing. Same if I do a reboot.. This have me in stitches as I ofcause has the need for privacy from each account.
Both accounts are set up as admins, guest is deactivated.
rMBP 16gb sep2012.
userid 501:
home directory: /Users/Kevin
userid 502:
home directory: /Users/Christina
apart from that... I have loads of problems with Bluetooth, and hand-off only working 1 way (5s with 8.1) where only iOS -> OS X works, not vice-versa.

Ipod music missing after upgrading to 5.0 os

After upgrading to 5.0 os on my iphone 4 I have had several problems...
1. all my contacts disappeared and then started to reappear when I would open General > Mail, Contacts, Calendars and then change the Sort Order and then change it back to what I wanted I did this like 3 times and then all my contacts were back
2. It keeps freezing while I am in an app, typing a text, doing just about anything
3. Alot of my music is gone, like the album work is there, the name of the song, the name of the artist but when you go to click to play it, it automatically jumps to the next song or it will play the next song on the list while still showing the other songs album work, title and artist
4. in the ipod the "play triangle" is always there, whether it is playing or not so to pause the music I have to hit the play triangle 3 times before it will stop
this is my problem list so far and I have only had the new os for 3 days....i am afraid as to what more time will show
as for now I am going to try re-sync my phone and maybe it will fix some of the quirks...i already tried a reset and it did not fix the problems...

ipod change to music

Libblkid.so.1 missing after upgrading to util-linux 2.24.1-3.

I cannot boot my system after upgrading and reboot. Here's what I've done so far:
[2014-03-17 15:57] [PACMAN] upgraded util-linux (2.24.1-1 -> 2.24.1-3)
[2014-03-17 16:07] [PACMAN] Running 'pacman -S systemd systemd-sysvcompat libsystemd'
[2014-03-17 16:10] [PACMAN] reinstalled libsystemd (211-1)
[2014-03-17 16:10] [ALPM-SCRIPTLET] udevadm: error while loading shared libraries: libblkid.so.1: cannot open shared object file: No such file or directory
[2014-03-17 16:25] [PACMAN] downgraded util-linux (2.24.1-3 -> 2.24.1-1)
chroot and downgrading util-linux to version 2.24.1-1 and the system boot perfectly fine.
On my X session, I tried upgrading util-linux again:
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
error: failed to read file '/usr/lib/libblkid.so.1': No such file or directory
$ pacman -Qe util-linux
util-linux 2.24.1-3
$ sudo pacman -U /var/cache/pacman/pkg/util-linux-2.24.1-1-i686.pkg.tar.xz
loading packages...
warning: downgrading package util-linux (2.24.1-3 => 2.24.1-1)
$ LC_MESSAGEs=C pacman -Qo /usr/lib/libblkid.so.1
/usr/lib/libblkid.so.1 is owned by libutil-linux 2.24.1-3
$ pacman -Qe util-linux
util-linux 2.2.4.1-1
And I've tried reinstall libutil-linux and util-linux:
$ sudo pacman -S util-linux libutil-linux
warning: libutil-linux-2.24.1-3 is up to date -- reinstalling
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
error: failed to read file '/usr/lib/libblkid.so.1': No such file or directory
$ sudo pacman -U /var/cache/pacman/pkg/util-linux-2.24.1-1-i686.pkg.tar.xz
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
/usr/lib/libblkid.so.1 is owned by libutil-linux 2.24.1-3
$ ls -l /usr/lib/libblkid.so.1.1.0
-rwxr-xr-x 1 root root 252840 Jan 24 22:14 /usr/lib/libblkid.so.1.1.0
I compiled my own systemd 211 and I remember when I installed systemd 211, pacman complain some libraries exists in filesystem and cannot upgrade systemd. I just deleted those libraries, idiot but systemd,systemd-sysvcompat and libsystemd 211 installed just fine.
$ systemctl --version
systemd 211
+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR
What should I do next? I'm stuck.
EDIT: Nevermind. I've found the solution, just run this command twice:
sudo pacman -S util-linux libutil-linux
Last edited by serdotlinecho (2014-03-17 12:04:53)

I cannot boot my system after upgrading and reboot. Here's what I've done so far:
[2014-03-17 15:57] [PACMAN] upgraded util-linux (2.24.1-1 -> 2.24.1-3)
[2014-03-17 16:07] [PACMAN] Running 'pacman -S systemd systemd-sysvcompat libsystemd'
[2014-03-17 16:10] [PACMAN] reinstalled libsystemd (211-1)
[2014-03-17 16:10] [ALPM-SCRIPTLET] udevadm: error while loading shared libraries: libblkid.so.1: cannot open shared object file: No such file or directory
[2014-03-17 16:25] [PACMAN] downgraded util-linux (2.24.1-3 -> 2.24.1-1)
chroot and downgrading util-linux to version 2.24.1-1 and the system boot perfectly fine.
On my X session, I tried upgrading util-linux again:
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
error: failed to read file '/usr/lib/libblkid.so.1': No such file or directory
$ pacman -Qe util-linux
util-linux 2.24.1-3
$ sudo pacman -U /var/cache/pacman/pkg/util-linux-2.24.1-1-i686.pkg.tar.xz
loading packages...
warning: downgrading package util-linux (2.24.1-3 => 2.24.1-1)
$ LC_MESSAGEs=C pacman -Qo /usr/lib/libblkid.so.1
/usr/lib/libblkid.so.1 is owned by libutil-linux 2.24.1-3
$ pacman -Qe util-linux
util-linux 2.2.4.1-1
And I've tried reinstall libutil-linux and util-linux:
$ sudo pacman -S util-linux libutil-linux
warning: libutil-linux-2.24.1-3 is up to date -- reinstalling
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
error: failed to read file '/usr/lib/libblkid.so.1': No such file or directory
$ sudo pacman -U /var/cache/pacman/pkg/util-linux-2.24.1-1-i686.pkg.tar.xz
$ LC_MESSAGES=C pacman -Qo /usr/lib/libblkid.so.1
/usr/lib/libblkid.so.1 is owned by libutil-linux 2.24.1-3
$ ls -l /usr/lib/libblkid.so.1.1.0
-rwxr-xr-x 1 root root 252840 Jan 24 22:14 /usr/lib/libblkid.so.1.1.0
I compiled my own systemd 211 and I remember when I installed systemd 211, pacman complain some libraries exists in filesystem and cannot upgrade systemd. I just deleted those libraries, idiot but systemd,systemd-sysvcompat and libsystemd 211 installed just fine.
$ systemctl --version
systemd 211
+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR
What should I do next? I'm stuck.
EDIT: Nevermind. I've found the solution, just run this command twice:
sudo pacman -S util-linux libutil-linux
Last edited by serdotlinecho (2014-03-17 12:04:53)

Portable hotspot menu missing after upgrading to iOS 8.1 on iPhone 5

i could not access the personal hotspot feature after after upgrading my iPhone 5 to iOS 8.1

Try a quick and rissoles Reset by holding the Sleep / Wake button and the Home button at the same time until the Apple logo shows then release the buttons and wait until the lock-screen returns. Now open you iPhone with your code and then click the Sleep / Wake button and then depress only the Home button. Now try you finger print.

10.9 Server mail public folders missing after upgrade cannot get them back HELP

Help after upgrade my public folders dissapeared when using the same configuration used in previous ML server Mail would not work
Help Please.

Did you enable the ACL plugin (per instructions above) ?
create an ACL file
/Library/Server/Mail/Data/mail/public/dovecot-acl
with the contents something like this:
user=jeff lrwstipekxa
authenticated lri
This would give user jeff full access
authenticated users could drop files, but not read
Thats just an example.
Read-up on it here
http://wiki.dovecot.org/ACL
Make sure you give each subfolder an ACL.
Once setup, new folders created via imap will inherit the ACL from parent.

Too many syntax errors after upgrade to ECC 6.0

Hello,
We have made a test upgrade from 4.6C to ECC 6.0. OS --> AIX 5.3; DB --> DB2 8.2. After upgrade we have a lot of syntax errors, why? Anybody has the same problem? Do I must to check all my programs?
Thanks.
Martin

Hello, here there is an example in Z program, but I have seen in no Z programs too with includes or userexits in the second example.
Thanks.
Martin.
first example:
Error in the ABAP Application Program
The current ABAP program "GBT10CO0" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "ZGGBR000 " in include "ZGGBR000
" in
line 279:
""SYST-MODNO" must be a character-type data object (data type C, N, D, "
"T or STRING) ."
second example:
Error in the ABAP Application Program
The current ABAP program "SAPLGBL5" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "GBT10FI0 " in include "GBT10FIB
" in
line 1288:
"The FORM "SEND_CMPLX_DATA_015" does not exist."

Many Keytags Missing After Upgrade to PE10

Similar Messages

Maybe you are looking for