Many logic plugins failing validation
I am running logic 9.1.7 on osx 10.6.8
many logic plugins failing validation including those that worked before. Also I find those same plugins are working fine in ableton live. I just installed updates for many native instruments plugins and installed spectrasonics omnisphere.
now all my native instrument, waves, and spectrosonics plugins crash during the validation phase. Also uhe plugins like zebraCM crash.
I go into the Audio Units manager and select one of the native instrument plugins that works fine in ableton live and it crashes upon validation. what is the best way to troubleshoot this problem?
Cheers.
Hi,
First you should(if you can) change your title. "Logic plugins" don't need validation. They're part of the program. Second, you should trace where your problems began. Ableton might be using the VST versions of all your plugins, that's why they're working fine in Live. Logic uses the AU versions of those plugins.
If your problems began when you updated the plugins, i doubt that all those companies' AU updates are bogus. So, it looks to me like you either have a problem at the core of your OSX installation, or(without accusing you of anything) the "place" where you got your updates didn't do a good job at cracking the AU versions. Good luck.
P.S. An easy way of checking if it's Logic or OSX would be to load these plugins in GarageBand. If they load up fine in GB, you have a problem at the Logic app level...
Similar Messages
-
Amplitube 2 "Failed Validation" HELP
Hello all. I just received my knew Amplitube 2 software today, installed it just fine, but when I opened Logic Pro 8 up Amplitube 2 failed validation in the Audio Units manager. I had this happen to me before with ik multimedia's Ampeg SVX, but I still could find and use it within Logic. Not the case now with Amplitube 2. When SVX was installed on my G5 I never got a failed validation, but now in my iMac it happens every time. The big problem is I can't find or open the Amplitube 2 so therefore I can't register the darn thing.....this *****!! HELP PLEASE....HELP PLEASE! Thank you.
Mr. Confussed wrote:
The big problem is I can't find or open the AmpliTube 2 so therefore I can't register the darn thing.....this *****!! HELP PLEASE....HELP PLEASE!!!! Thank you.
I just had a similar thing happen with another IK Multimedia product. It turns out the AU was not Universal Binary, so I had to download a newer version so I could register.
First, you can go to http://www.ikmultimedia.com/registration. That's the URL on your registration card. Enter your software serial number along with the rest of the stuff, but leave the Digital ID field blank, as per the form's instructions ( +"If you choose Option 1, leave this field blank, complete all the other required fields, and click 'Submit'"+ ). Your software will then be registered, allowing you to access the download area where you'll find the latest version. Now, you should be able to run the standalone AmpliTube 2 application and go through the authorization process.
That said, however, the AmpliTube 2 plugin still does not work in Logic for me. I have to use it through AmpliTube X-Gear, which came with my Total Guitar & Bass bundle. Since AmpliTube X-Gear runs all my IK guitar plugins (AmpliTube 2, SVX, Jimi Hendrix, etc.) through a single interface, I never bothered (or had the need) to have AmpliTube 2 pass validation.
In summary, you can register your software using the above steps, then try validating it through Logic. If it doesn't work, you can at least contact their tech support as a registered user. Otherwise, get AmpliTube X-Gear...
I just checked their website. This may interest you:
+"For a limited period, all registered users of at least one “Powered by AmpliTube” product* including AmpliTube 2, Ampeg® SVX, AmpliTube Jimi Hendrix™, AmpliTube Metal and AmpliTube 2 Live will also receive a free download of AmpliTube X-GEAR in their User Area"+
-droo -
Apple's Audio Units Fail Validation in Yosemite
Why do Apple's audio units fail validation in Yosemite
Anyone else having this problem ?
What's the fix ?
Even Logic Pro X 10.0.7 can't validate Apple's AU plugs.
[Rant: i have never been so disappointed with a Mac OS as i am with YO. Most of my midi/audio/video programs will not work because of the validation of AU/VST plugs. I am this close to trashing Yosemite . It reminds me of my OS 9 days: if you even looked in the wrong direction the system stop working.]are there any AU plugs here, in the components folder...?
-
XSL Mapper JDeveloper plugin fails to launch from App Engine
XSL Mapper JDeveloper plugin fails to launch from App Engine ONLY WHEN THE TARGET LOCATION OF THE SERVICE CONFIGURATION POINTS TO AN HTTPS URL.
If I make the target location field of the service configuration point to an HTTP url, the plugin launches fine.
The error message indicates that there is a missing certificate in the chain:
oracle.tip.tools.ide.common.xsdgrammar.SchemaGrammarException: sun.security.validator.ValidatorException: No trusted certificate found
A basic google search on this error leads me to believe that I need to add a key to the java clients keystore on my PC. Can anyone confirm or deny this? Has anyone else encountered this?After digging pretty hard I believe I've found the cause and two possible solutions...and I quote...
"This seems to be a known conflict between versions of the Digi 001, the Audio Media III card, Panther OS, Pro Tools, and QuickTime 7 and above. This Mac is running...
OS Panther 10.3.9
Pro Tools LE 6.2.2
This is what I've found from http://sillydog.org/forum/sdt_8928.php (page three of this thread).
"testing has yielded that the Audio Media III card can be used with Pro Tools LE 6.2.3 on a platform as high as OSX Panther 10.3.9 as long as you do not (I repeat do not) install QuickTime 7ever. The QuickTime 6.5.2 re-installer will not remove problems created by installing QuickTime 7."
"Basically if you are running what Digidesign refers to as “Legacy” hardware. Audio Media III/ Toolbox or the Digi 001. You are running a version of Pro Tools LE that is incompatible with QuickTime 7. If at any point QuickTime 7 is installed you must re-install (the OS and all programs) to delete its effects, and are stalled on OSX 10.3.9 (w/o QuickTime 7)."
Knowing this, I was able to find a possible solution here... http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
The other solution is to upgrade equipment, or re-install OS and other Apps to go backwards.
Hope this helps some people! -
Too many http plugin sessions seen in SM04
Hi,
There are too many http plugin sessions created in SM04 in production system for a custom transaction.
The client claims that such multiple sessions are there only for this particular transaction so there is some problem in abap code of this z-transaction.
Could you please help, what abap syntax or logic might lead to creation of such multiple http plugin sessions for the transaction.
The only known reason is that incomplete log off by user (closing the browser w/o loggin off etc) which created sombie sessions - but this is not applicable here because there are about 30 sessions created and user certainly does not log off so many times. Other activity by user is browser refresh etc but that canot be applied to only this particular transaction.
any help is appreciated.
thank you
BB
Did you find solution to your issue?
We are having a same problem but SAP asked us to recreate it. It is completely random and happens very rarely. If I would know how to recreate it I would probably solve it myself
Regards
Michael -
XSLT sender plugin fails to set JMS message properties
When creating a JMS message to be put on a JMS queue, one of the XSLT for the XSLT automation plugin fails to set JMS string properties like: wlsmimehdrContent_Type
The content on the xslt are listed below.
The xslt in CPRLookupRequest.xslt sets:
wlsmimehdrContent_Type
SERVICE_SUFFIX
OSM_EVENT_TYPE
as expected, but the almost similar plugin NABSCreditEvalPluginRequest.xsl fails to set the same string JMS properties.
I'm looking for a clue, because I'm clueless. I'm an XSLT newbie, so it might be something simple.
The core part of the problem is put in bold in the listings below
h2. CPRLookupRequest.xslt:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns="http://java.sun.com/products/oss/xml/ServiceActivation" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:oms="urn:com:metasolv:oms:xmlapi:1" xmlns:java="http://xml.apache.org/xalan/java" xmlns:xalan="http://xml.apache.org/xalan" xmlns:mslv-sa="http://www.metasolv.com/oss/ServiceActivation/2003" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:co="http://java.sun.com/products/oss/xml/Common" exclude-result-prefixes="oms java xsl xalan">
<xsl:param name="automator"/>
<xsl:param name="log"/>
<xsl:param name="context"/>
<xsl:param name="outboundMessage"/>
<xsl:output method="xml" indent="yes" omit-xml-declaration="no" xalan:indent-amount="5"/>
<xsl:template match="/">
<xsl:apply-templates select="oms:GetOrder.Response">
<xsl:with-param name="SERVICE_SUFFIX" select="'CprDomain/Cpr'"/>
<xsl:with-param name="OSM_EVENT_TYPE" select="'CPR_LOOKUP'"/>
</xsl:apply-templates>
</xsl:template>
<xsl:template match="oms:GetOrder.Response">
<xsl:param name="SERVICE_SUFFIX" />
<xsl:param name="OSM_EVENT_TYPE" />
*<xsl:variable name="void2" select="java:setStringProperty($outboundMessage, '_wls_mimehdrContent_Type', 'text/xml; charset=UTF-8')" />*
*<xsl:variable name="void3" select="java:setStringProperty($outboundMessage, 'SERVICE_SUFFIX', $SERVICE_SUFFIX)" />*
*<xsl:variable name="void4" select="java:setStringProperty($outboundMessage, 'OSM_EVENT_TYPE', $OSM_EVENT_TYPE)" />*
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Body env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<m:getPersonByCPR xmlns:m="/Cpr">
<getPersonByCprRequestInfo xmlns:n1="java:dk.tdc.soa.cpr.extern.datatypes" xsi:type="n1:GetPersonByCprRequestInfo">
<applicationId xsi:type="xsd:string"><xsl:text>CPR</xsl:text></applicationId>
<cprNumber xsi:type="xsd:string"><xsl:value-of select="oms:_root/oms:cpr" /></cprNumber>
</getPersonByCprRequestInfo>
</m:getPersonByCPR>
</env:Body>
</env:Envelope>
</xsl:template>
</xsl:stylesheet>
h2. NABSCreditEvalPluginRequest.xsl
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" exclude-result-prefixes="oms java xsl xalan"
xmlns="http://java.sun.com/products/oss/xml/ServiceActivation"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:oms="urn:com:metasolv:oms:xmlapi:1"
xmlns:java="http://xml.apache.org/xalan/java"
xmlns:xalan="http://xml.apache.org/xalan"
xmlns:mslv-sa="http://www.metasolv.com/oss/ServiceActivation/2003"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:co="http://java.sun.com/products/oss/xml/Common">
<xsl:param name="automator"/>
<xsl:param name="log"/>
<xsl:param name="context"/>
<xsl:param name="outboundMessage"/>
<xsl:template match="/">
<xsl:apply-templates select="oms:GetOrder.Response">
<xsl:with-param name="SERVICE_SUFFIX" select="'/APILink/CreditServices'"/>
<xsl:with-param name="OSM_EVENT_TYPE" select="'NABS_CREDIT_EVAL'"/>
</xsl:apply-templates>
</xsl:template>
<xsl:template match="oms:GetOrder.Response">
<xsl:param name="SERVICE_SUFFIX"/>
<xsl:param name="OSM_EVENT_TYPE"/>
*<xsl:variable name="void2" select="java:setStringProperty($outboundMessage, '_wls_mimehdrContent_Type', 'text/xml; charset=UTF-8')"/>*
*<xsl:variable name="void3" select="java:setStringProperty($outboundMessage, 'SERVICE_SUFFIX', $SERVICE_SUFFIX)"/>*
*<xsl:variable name="void4" select="java:setStringProperty($outboundMessage, 'OSM_EVENT_TYPE', $OSM_EVENT_TYPE)"/>*
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Body env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<xsl:choose>
<xsl:when test="count(oms:_root/oms:cpr) + count(oms:_root/oms:birthDayPart) >0">
<xsl:call-template name="private" />
</xsl:when>
<xsl:when test="count(oms:_root/oms:cvr) > 0">
<xsl:call-template name="business" />
</xsl:when>
</xsl:choose>
</env:Body>
</env:Envelope>
</xsl:template>
<xsl:template name="private">
<m:validatePrivateCustomer xmlns:m="java:dk.tdc.apilink.logic.sessions.interfaces">
<validateCustomerCreditInput xsi:type="n1:ValidateCustomerCreditInput" xmlns:n1="java:dk.tdc.apilink.logic.datatypes">
<accountCategory xsi:type="java1:char" xmlns:java1="java:language_builtins">
<xsl:text>I</xsl:text>
</accountCategory>
<adrLocation xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:houseNo"/>
</adrLocation>
<adrStreetName xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:streetName"/>
</adrStreetName>
<adrZip xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:zipCode"/>
</adrZip>
<xsl:choose>
<xsl:when test="count(oms:_root/oms:birthDayPart) > 0">
<birthDate xsi:type="xsd:string">
<xsl:value-of select="substring(oms:_root/oms:birthDayPart,1,4)"/><xsl:text>.</xsl:text>
<xsl:value-of select="substring(oms:_root/oms:birthDayPart,5,2)"/><xsl:text>.</xsl:text>
<xsl:value-of select="substring(oms:_root/oms:birthDayPart,7,2)"/>
</birthDate>
</xsl:when>
<xsl:otherwise>
<birthDate xsi:type="xsd:string">
<xsl:text>19</xsl:text>
<xsl:value-of select="substring(oms:_root/oms:cpr,5,2)"/><xsl:text>.</xsl:text>
<xsl:value-of select="substring(oms:_root/oms:cpr,3,2)"/><xsl:text>.</xsl:text>
<xsl:value-of select="substring(oms:_root/oms:cpr,1,2)"/>
</birthDate>
</xsl:otherwise>
</xsl:choose>
<firstName xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:firstName"/>
</firstName>
<lastBusinessName xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:lastName"/>
</lastBusinessName>
</validateCustomerCreditInput>
</m:validatePrivateCustomer>
</xsl:template>
<xsl:template name="business">
<m:validateCompanyCustomer xmlns:m="java:dk.tdc.apilink.logic.sessions.interfaces">
<validateCustomerCreditInput xsi:type="n1:ValidateCustomerCreditInput" xmlns:n1="java:dk.tdc.apilink.logic.datatypes">
<accountCategory xsi:type="java1:char" xmlns:java1="java:language_builtins">
<xsl:text>B</xsl:text>
</accountCategory>
<cvrNumber xsi:type="xsd:string">
<xsl:value-of select="oms:_root/oms:cvr"/>
</cvrNumber>
</validateCustomerCreditInput>
</m:validateCompanyCustomer>
</xsl:template>
</xsl:stylesheet>I have written an UDF to determine the filename dynamicly:
//write your code here
String str = "SAPDATA-" + a + "ES" + ".xml";
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, str);
return ""; -
OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.
Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into EntityMessage
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
How many logic boards needed ?!!
Yes. How many logic boards does a Powerbook G4 17" (1Ghz) need to work properly? Do they really have to be changed every year?
I bought this beautiful machine secondhand. About 6 months later the screen seems to fail (stays black) i can us it only in Target mode as hard disk. The consulted Repair centre concludes: new logic board! Then they discover it already had been changed 26/07/2004 ; merely a year ago. But no more garanty. It isn't fair that such a expensive part and repair is only garanteed foor 3 months. Cost of this reparation: more than 700 euros !!!!! Apple customer care: "sorry, we can't do anything to help you" Who can then?
Time to switch I suppose? What else can I do ??Sorry to hear that - not sure if you have any recourse based on the fact that it has already been replaced. If you have an up to date AppleCare contract then I would think it should be covered. In general I would say that your problem is somewhat rare. If main board failures every 6 months were common across the entire product line - or even just a subset such as the 17" - then there woudl have been a class action lawsuit resulting in a settlment that woudl provide extended warranty coverage.
-
Failed validation as a level hierarchy
Hi,
I have dimension called SKU in my analytic workspace with a hierarchy PRODUCTS defined as ALLPRODUCTS<--MD<--MG<--PG<--STYLE<--PRODUCT. I have used composite keys as Members to maintain uniqueness. For example the member expression for PG is CUBE_DEV.DIMSKU.MDID || CUBE_DEV.DIMSKU.MGID || CUBE_DEV.DIMSKU.PGID. I'm not using Surrogate keys. When I hit the maintain Dimension SKU, LOAD NO SYNCH succeeds but the compile step fails with error
"INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>INI: XOQ-01712: "SKU.PRODUCTS" failed validation as a level hierarchy., Generic at TxsOqStdFormCommand::execute"
I looked at the rejected records and every record has the error "(XSRWLD13) Cannot change the level of a dimension member within a single load." Can anyone help me resolving this issue ?
I'm using AWM 11.2.0.1.0 on Oracle 11g R2 server.
Thanks,
RKDavid,
I looked at the data and found out that there were NULLs in many key columns. I updated all of them to the value 'Unknown'. Also I re-implemented Composite keys because I thought Type 2 dimension would pose problem in determining uniqueness. Now there are no errors and I could successfully load data into the dimension.
Below is the latest definition
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2">
<StandardDimension
Name="SKU"
ETViewName="SKU_VIEW"
ETKeyColumnName="DIM_KEY"
ETLevelColumnName="LEVEL_NAME"
ETMemberTypeColumnName="MEMBER_TYPE"
ETDimensionOrderColumnName="DIM_ORDER"
DefaultHierarchy="PRODUCTS"
ETHierarchyOrderColumnName="HIER_ORDER"
ShortValueDescriptionAttribute="SHORT_DESCRIPTION">
<Organization>
<AWPrimaryDimensionOrganization
AW="&AW_NAME;"
AddUniqueKeyPrefix="True"
MVOption="NONE"
HierarchyConsistencyRule="CONSISTENT">
<MVCreationOptions
RefreshType="COMPLETE"
RefreshOn="DEMAND"
UsingConstraintsClause="TRUSTED">
</MVCreationOptions>
<DefaultBuild>
<![CDATA[BUILD SPEC SYS_DEFAULT
LOAD,
COMPILE
)]]>
</DefaultBuild>
<AttributeOrganization
Attribute="SHORT_DESCRIPTION">
</AttributeOrganization>
</AWPrimaryDimensionOrganization>
</Organization>
<DimensionLevel
Name="MERCHDIVISION"
ETKeyColumnName="MERCHDIVISION">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
</DimensionLevel>
<DimensionLevel
Name="MERCHGROUP"
ETKeyColumnName="MERCHGROUP">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
</DimensionLevel>
<DimensionLevel
Name="PRODUCTGROUP"
ETKeyColumnName="PRODUCTGROUP">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
</DimensionLevel>
<DimensionLevel
Name="STYLE"
ETKeyColumnName="STYLE">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="STYLE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="STYLE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="STYLE">
</Description>
</DimensionLevel>
<DimensionLevel
Name="PRODUCT"
ETKeyColumnName="PRODUCT">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCT">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCT">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCT">
</Description>
</DimensionLevel>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="sku">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="sku">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="sku">
</Description>
<Hierarchy>
<LevelHierarchy
Name="PRODUCTS"
IsSkipLevel="True"
IsRagged="True"
ETParentColumnName="PARENT"
ETDepthColumnName="DEPTH"
ETViewName="SKU_PRODUCTS_VIEW">
<HierarchyLevel
DimensionLevel="MERCHDIVISION">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="MERCHGROUP">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="PRODUCTGROUP">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="STYLE">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID || DIMSKU.STYLE"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID || ':' || DIMSKU.STYLE">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="PRODUCT">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID || DIMSKU.STYLE || DIMSKU.SKU"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID || ':' || DIMSKU.STYLE || ':' || DIMSKU.SKU">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
</LevelHierarchy>
</Hierarchy>
<Attribute>
<BaseAttribute
Name="SHORT_DESCRIPTION"
IsVisibleForAll="True"
SQLDataType="NVARCHAR2(100)"
ETAttributeColumnName="SHORT_DESCRIPTION">
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="Short Description">
</Description>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="Short Description">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="Short Description">
</Description>
<Classification
Value="STAR"/>
</BaseAttribute>
</Attribute>
</StandardDimension>
</Metadata>
But I'm facing problem if I put Names in Short Description attribute. I have fields MerchGroupName, MerchDivisionName, ProductGroupName, StyleName in the database table which I would love to use for short description. When I use them, the error is
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>INI: XOQ-01600: OLAP DML error "ORA-34034: 1 is already a value of DEMANTRADW!SKU_MERCHDIVISION_SURROGATE." while executing DML "SYS.AWXML!R11_LOAD_DIM('SKU.DIMENSION' SYS.AWXML!___R11_LONG_ARG_VALUE(SYS.AWXML!___R11_LONG_ARG_DIM 1) 'MATCH' 'YES' 'YES' 'SKU.MERCHDIVISION.LEVEL' 'SKU.MERCHGROUP.LEVEL' 'SKU.PRODUCTGROUP.LEVEL' 'SKU.STYLE.LEVEL' 'SKU.PRODUCT.LEVEL' 'SKU.SHORT_DESCRIPTION.ATTRIBUTE' 'SKU.PRODUCTS.HIERARCHY')", Generic at TxsOqStdFormCommand::executeINI: XOQ-01601: error while loading data for Cube Dimension "CUBE_DEV.SKU" into the analytic workspace, Generic at TxsOqStdFormCommand::execute -
Behance plugin fails to publish to WIP in Lightroom 5.6. Returns following error: "Failed to upload a WIP update to Behance: Invalid permissions or request type". (I also saw this question asked in the Deutsche forums in Jan 2014 with no answers)
In Behance settings Adobe Photoshop Lightroom has permission to:
Revoke Access
may act on your behalf to comment, follow users, view and appreciate projects
Allows access to read network activity feed
Able to read collections you have marked as private
Ability to create, manipulate and delete your collections.
Able to read works in progress marked as private
Able to post, manipulate and delete a work in progress on your behalf
Does anyone have a solution?
-------- System Settings ---------
Lightroom version: 5.6 [974614]
Operating system: Windows 8.1 Business Edition
Version: 6.3 [9600]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 3.0 GHz
Built-in memory: 16301.9 MB
Real memory available to Lightroom: 16301.9 MB
Real memory used by Lightroom: 374.4 MB (2.2%)
Virtual memory used by Lightroom: 346.3 MB
Memory cache size: 224.4 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 2560x1440
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Costco Photo Center
4) Facebook
5) Flickr
6) Leica Tether Plugin
7) Nikon Tether Plugin
Config.lua flags: None
Adapter #1: Vendor : 8086
Device : 412
Subsystem : 5b01028
Revision : 6
Video Memory : 0
Adapter #2: Vendor : 10de
Device : fe4
Subsystem : 5b01028
Revision : a1
Video Memory : 7c1
Adapter #3: Vendor : 1414
Device : 8c
Subsystem : 0
Revision : 0
Video Memory : 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 1042
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Intel(R) HD Graphics 4600
ShaderModel: 11.1
Vendor: Intel
VendorID: 32902
Version: 8086:0412:5b01028:0006Behance Plugin for LR not Authorizing in LR 5.6
-
I have been pulling my hair out for a few days now reading these and many other forums in my attempt to repair my ailing Safari browser. I have not yet seen anything that has helped me fix it.
Here's the problem, any site that uses a plugin fails to load the item that the plugin is needed for whether it is a flash item, Quicktime, Windows Media, mp3, etc. I first noticed it when attempting to load homestarrunner.com and got only a black screen. I then went to google video to try it there, then some friends linked me to some mp3s and they all failed without giving me an error. It was almost like there was just nothing there. If it is an item that would normally load iTunes or Quicktime nothing happens. For flash it just ignores that section of a page.
-Notes to clear up any murky details I may have left out.
I have installed the 10.4.6 Combo for PPC just a moment ago and my Software Update has been pulling down every update for my machine and installing them all. Safari has been acting up for possibly as long as a week but I was not sure that there was anything wrong with it until just a couple days ago. I have not noticed any issues with any other software on my machine, nor have I installed anything recently.
Any help or suggestions would be greatly appreciated. Thanks/me smacks self on fronthead!
I did everything under the sun except for checking the preferences. Apparently it unchecked itself? Maybe, I dunno. But for whatever reason I assumed a major problem but could have saved myself all this wasted time by just troubleshooting properly. Next time I do something this stupid I will make sure to start with step one of troubleshooting.
Question #1: roadki1, is your computer turned on?
Thanks again, a new set of eyes makes things so clear. -
At max how many logical columns can be created in RPD
Hi All,
At max how many logical columns can be created in RPD. I have a requirement of creating 200 columns. Will there be any problem .
Is there any predefind number of columns for RPD creation??
Please help ..Hi Annapurna,
There's no limit that I'm aware of or which is mentioned anywhere. Just as an example: I have a logical fact table with around 750 logical columns (>500 original measures & 250 derived measures). No issue whatsoever. Opening the presentation table through answers takes about 2-3 seconds (the NQSQL command has a lot to retrieve), but that's about it.
Cheers,
C. -
Dimension 'Years' failed validation
Hi All,
I am getting this error while deploying the application.
Error : Dimension 'Years' failed validation 'YearMembersSequential' for the following reason(s): Year members must be sequential.
I am seeing my Year dimension is sequential only.
I am not able to figure out the reason for this error . Can anyone please help me understand this.Not to open a new thread as I have an issue with dimension Year as well, I will post my problem here (hope the author won't mind).
I created a simple EPMA application in version 11.1.2.2 with all mandatory and 2 generic dimensions. One of mandatory dimension is, of course, Year (dimension type: Year) with following members: FY11, FY12, FY13. Initial deployment against both, Planning and Essbase went well. After that I wanted to extend dimension Year for member FY14 and to redeploy the application. Validation was successful, but deployment message was "Completed/With Errors" (100%). Deployment was done with selecting "Refresh outline" and "Full deploy". In deployment log file I have the following entry:
"Consolidation operators for years must be set to Ignore for all plan types."
"Rejecting Member FY14."
This message is clear enough, but the problem is that members that belong to dimension type Year don't even have consolidation operators in properties area.
What else comes to my mind is that (maybe) with version 11.1.2.2 it is not allowed to add new members for dimension Year once application is deployed for the very first time. But in that case, the above error message is quite misleading. Under version 11.1.1.3 it is possible to add new members to dimension Year and to redeploy it without errors.
Is this a bug or a feature?
Has anyone had such problem?
Thanks,
Damir -
I tried to install Moonlight plugin version 3.9.9 (4 preview) on the latest version of Firefox. Error message is: "Novell Moonlight could not be installed because it is not compatible with with Firefox 6.0.2".
There isn't any versions of Moonlight that can be installed on Firefox 6.0.2.
Moonlight plugin worked very well with previous versions of Firefex.
Is it correct?
When Firefox 6.0.2 will become compatible with Moonlight plugin (or vice-versa)?Installation of Moonlight plugin fail on Firefox 7.0.1 because it is not compatible.
Found this, worked for me
I found an other way: download the compatibility Reporter addon. this addon makes firefox to ignore the compatibility of the addon: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api
Solution By passerpunt -
How many logical systems are required to connect between one XI and R3 sytm
Hi Experts,
I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
details wht I configured is as follows :
For XI : LOGSYSXI assigned to 100 client
For R3: LOGSYSR3 assigned to 800 client.
Do I need to create two log'cal systems on one side?
How many logical systems can a Client can support simultaneously? is it only one or more that one?
THANKS IN ADVANCE.
Sunil K ShettyHi,
>>>>I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
as you've noticed you only need 2 - one for r3 one for XI
this is enough
also shown in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
>>>>How many logical systems can a Client can support simultaneously?
one per client
but you can create as much as you wish
wihtout connecting them to a client
but use one for XI
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
BW7.3 SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the Start Routine
Hi Gurus, a face a strange behavior with BW7.3 and the Inventory Cube 0IC_C03: the standard scenario works well when I activate the cube and its transformations ..bx, bf and um. Then I have modified the InfoCube 0IC_C03 and added some field like 0cus
-
I just bought a d2 Lacie external hd for my powerbook so that i can fit all those videos... i wanted to know what format i should put the external hd in... i would like to be able to use it with windows computers but if there is a big differance then
-
Hi I am analising different possibilities to implement vendor confirmation via EDI? Which Idoc - message type is suitable for Shipping Notification from vednor? Is Inbound delivery created after Shipp. Notif comes to ERP? What might be scenarios rela
-
Hello All, I am trying to configure Dac on windows7 64 bit but getting the error... Configuration: Windows7 64bit Oracle DB: Oracle 11g Dac Version : 10.1.3.4.1 Informatica: 9x Obiee 11g Already copy the file odjbc5.jar file into dac_home\bifoundatio
-
Hi I have just done some credits in motion which I have used in Final cut using the scroll behaviour but the letters look as if they had glitter,they sometimes flash slightly. I have used white letters against a black background and the only thing th