Many message From : Local4.Warning Message from Kiwi? How fix it?

Many Message from Kiwi log:
Deny icmp src outside: 211.x.x.121 dest inside: 202.xxx.xxx.xxx (type 4, code 0) by access-group "100"
1) What is type 4, code 0? How can I find this type of error in Cisco website?
2) Many Many transaction pointing to me! How can I fix it?
I use traceroute but * * * * finally.
I can ping 211.x.x.121 .
I can telnet 211.x.x.121 and ask me password.

That means that per access-list 100, that ICMP message is being denied.
It has nothing to do with being able to ping or connect to that address. If you want to permit that traffic, edit your ACL to do so.
To suppress that message type, go into 'config t' mode on the PIX and type "no logging message xxxxxxx" where the x's are the message ID number. The message ID number should be in Kiwi. You should see "PIX-4-xxxxxx" beside the error message, the x's are the message ID you need to put into the PIX to supress it. This will keep the PIX from logging that message.

Similar Messages

Texting from ipad warning message

When sending a text message from the iPad 2, I'm getting a warning message with an exclamation point that the text cannot be sent. I am using WiFi and not Verizon or ATT service.
Thank you.

iMessage is not really txt messages. They look like a text, but they are not. You can only send to apple people that have the service turned on. Text messages go thru your telecom provider to another phone. The pad, of course, is not a phone, and cannot send anything on the phone network.
So what you are sending is handled by apple servers, but only goes to registered addresses. For a pad, the registered address is an e mail address. For an iPhone, it can be either a phone number on file w apple, or an e mail address on file with apple.
If you are sending from a pad, those are your only options.
If you are sending from an I phone, if the recipient is an iMessage person, it goes through as an I message. If the recipient is not, but is a cell phone, the system will automatically send it as a regular text. You may have noticed that from a phone, some of the messages are blue, and some are green, that is the difference. If you are sending to a pad from a phone, only the e mail address will work.
Ok?

Update Show Messages with customized warning message

Hi Friends,
We have a requirement, where if the PR line item value is 0.01, a warning message should be triggered while creating a PO with the corresponding PR number.
We are able to Trigger the Warning message, but it is not getting updated/ stored in the PO (Show messages) for further reference. once the user clicks OK or presses enter button, the message goes off as it is the process, but it needs to be updated, so that the user can get the warning message when trying to Test the PO.
Hope the problem is clear, do let know if more details is required.
Thanks in advance.
Regards,
Vasanth

Hi,
Do you issue message in exit EXIT_SAPMM06E_012. (include ZXM06U43)?
We use this exti for PO checks - all messages issued are then vissible in option 'show messages' next to PO date.
Hope it helps.
regards,
wojciech

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

AnyConnect VPN Warning Message

Hi
I have setup AnyConnect VPN and all works fine apart from the warning messages appearing about the server being Untrusted.
I am not too good with certificates so any help will be much appreciated. When I open anyconnect client and click connect, the warning appears then so I click continue anyway to carry on. Then after entering username//password the warning appears a second time and again i click continue and carry on.
We had a wildcard certificate so I installed in on the asa in the CA certificates section, Now the 2nd warning has gone but the first one still appears.
Any ideas???
Thanks

You can simply accept the self-signed certificate the first time you are presented with that message and direct AnyConnect to always trust such certificates.
If you don't want to do that, you need to make your clients automatically trust this certificate from your ASA. You can do that several ways. You mentioned using a 3rd party vendor - that ends up being the method of using a vendor in the trusted root Certificate Authority (CA) list. If you don't use one of the 3rd party ones, you will need to push out the trust via some software deployment method - e.g. a GPO for Windows clients in a managed AD setup or via pre-deploying with yet another 3rd party tool like LANdesk.
If you don't have an internal CA or AD-managed infrastructure for your clients then just telling users to click "always trust" is the path of least resistance (although the least secure).

Email notification of warning messages generated in /var/adm/messages

I�m using �mdmonitord� to periodically check status of my disks in RAID 1 (using Solaris Volume Management) If/when problem occurs the errors/warnings will be logged to[b] /var/adm/messages file. What do I need to configure/enable to monitor /var/adm/messages for particual WARNING messages and to notify me via email.
Similar utility on LINUX is Logwatch: http://www2.logwatch.org:81/index.html

Check /etc/init.d/dtcp , i guess it would be copyrighted to fujitsu-siemens if its the fujitsu dtcp. You can also9 do a pkginfo -l SMAWdtcp, which seems to be the name of the fujitsu package. Hmm, odd name for a Fujitsu package.
Actually i found the following Fujitsu bug:
A0559315 Fix flood of messages like dml_send DB_PS_Udp_Con_Remove_List failed
- caused by trying to send the message to a node that is down.
.. which seems rather familiar.
Its fixed with fujitsu patch 901199-08
Other Fujitsu DTCP patches are
901191-08 and 901244-01
Note that to get Fujitsu patches you need a special account, once you have an account you can download them from http://patches.ts.fujitsu.com/

Meaning of Warning Message

Dear all,
I have an INCLUDE, say the name is "Z_INCLUDE". I have included it in a program, say the program name is "Z_REPORT". When I perform syntax check in ABAP Editor, the following warning message appears for every single subroutine in Z_INCLUDE.
Include Z_INCLUDE
There should only be definitions in the TOP include (or nested includes within it). This means that any sort of implementations (CLASS... IMPLEMENTATION, FORM..., FUNCTION) is not meaningful.
01. What does the warning message mean?
02. How do I get rid of it?
Thank you in advance.
Regards,
Goh Tiam Tjai

Hi,
Warning messages W are processed according to the context in which they occur.
1)Messages Without Screens:-
In PBO context program continues processing after the MESSAGE statement otherwise, program terminates and control returns to point from which the program was called.
2)Messages on Screens:-
    Warning messages are not possible in POH or POV processing.
PAI processing is terminated, and control returns to the current screen. All of the screen fields for which there is a FIELD or CHAIN statement are ready for input. The user must enter a new value. The system then restarts PAI processing for the screen using the new values.
3)Messages on Selection Screens:-
    Selection screen processing terminates, and the    selection screen is redisplayed.
4)Messages in Function Modules and Methods:-
   Warning messages are ignored in this case.
Thanks,
Pramod

Warning message due to JSPDynpage

Hi All,
We have a scenario where in the jspdynpage we have only hyperlinks and One of the hyperlink is pointing to the standard uwl iview as follows
[http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true|http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true]
We are on CE7.1 and whenever I click on this hyperlink of jspdynpage, the uwl iview opens but with a warning msg at the header of the UWL as follows
"Another administrator is currently customizing this application. If you want to customize, please restart the application later and try again"
Same UWL iview when I open thru Home ->Work->UniversalWorklist , it does not show this warning message.
Is it bcoz of any session object inthe jspdynpage? any pointers will be of great help.
one note & Observation
assume that all the users are logout from the portal now any user first logged into the portal then that warnong message is not displayed at the header level of the UWL iView which we are accessing thru the hyper link from the JSPDynpage . but second user onwards any number of users are logged into the portal and click on the hyperlink in the JSPDynpage and it goes to UWL Iview where it is showing the above mentioned warning message at the header level. it is happening the same for the second user, third user and all users consequently but this warning message is not displayed for the very first logged in user.
Can anybody replys then it would be great help to us . <<text removed>>
when we access those links directly from the browser it is not giving that above specified warning message but this warning message is getting displayed when we access those hyperlinks from JSPDynpage .it seems there is some session related problem or something related to that. pls help.
Thanks
Bindu
Edited by: Hima Bindu on Apr 22, 2009 6:40 AM
Edited by: Matt on Apr 22, 2009 3:46 PM - please do not offer rewards

Hi Michael
Excellent !! .our issue has been resolved.
Thank you very much & Thanks a lot for your help.
Can you please tell me what the reason due to with ?sap-config-mode=true in the URL...??
can you please give me the reason why this warning message is disappeared by removing the ?sap-config-mode=true.
Thanks
Bindu

Mail not delivered for 4 hours warning message

I've recently started getting .mac mail bounced back to me from MAIL DELIVERY SUBSYSTEM saying that the message couldn't be delivered for the past 4 hours and would continue trying for 4 days. They never seem to go through.
This only happens with mail to my parents. I can send them mail from a different ISP account, and my husband can send them mail from his .mac account. I have not changed my preferences and neither have they. I would suspect their ISP, except that my husband's .mac mail goes through.
Any idea what the problem might be? Here's the relevant information from the warning message:
<parents' address>...Deferred:Invalid argument
Warnng: message still undelivered after 4 hours
Will keep trying until message is 4 days old
Reporting-MTA: dns; smtpout.mac.com
Action: delayed
Status: 4.4.2
MacBook Mac OS X (10.4.7)

You are apparently not alone - this from Macfixit today:
Updated Friday, February 09 2007 @ 09:15 AM PST
Today's Featured Article
Late-Breakers
.Mac outages, problems accessing email (#2): possible fixes
Users are continuing to report (in droves) problems accessing .Mac services -- particularly mail -- over the past few days.
Most reports indicate problems accessing .Mac mail from within various clients, including Mail.app. As such, the best stop-gap solution is to simply use the .Mac webmail interface in most cases
However, some users have also reported problems receiving messages through the webmail interface.
MacFixIt reader Michael Novelli writes:
"My .mac mail account stopped working yesterday. I can access it online."
Another reader adds:
"Same issue here with .Mac email. If I look at the Activity Viewer I can see my other email accounts connect and finish but .Mac just hangs with the blue and white candy cane progress bar. .Mac has become so unreliable that I cannot use it as my main account and have chosen another email service."
MacFixIt reader Jim writes:
"I am also encountering problems accessing .Mac mail with Eudora. Mail is apparently going out using .Mac and Eudora, but the problem is receiving mail."
Tom James reports issues with other areas of .Mac service:
"In addition to the problems accessing .mail via Mail, I had a problem today updating my .mac website. The server consistently refused to make changes to the welcome page even though iWeb organiser reported that the site as amended had been published. Deletion of the site in iWeb and creation of a second site initially did not work either but it n ow appears to have been updated. Perhaps there were delays in implementing changes due to the creaky nature of .Mac servers."
Possible fixes
Clear caches We've received unconfirmed reports that running the maintenance routines offered by AppleJack can resolve some .Mac connectivity issues -- potentially indicating cache corruption as a cause of problems. Cache cleaning can also be accomplished with tools like Cocktail or Tiger Cache Cleaner.
Just restart In other cases, a simple restart can have a beneficial effect. MacFixIt reader Tracey writes:
"I also experienced the .Mac mail connection problem yesterday utilizing Mail.app Version 2.1.1 (752.3). In my case, after a half an hour of being unable to connect, it finally dawned on me to go back to the basics of troubleshooting. After a reboot, and a subsequent relaunch of Mail.app, my .Mac mail became immediately responsive, and has been working without a glitch ever since (24 hours). It was a pretty simple fix in my case (or a serendipitous coincidence of timing)."

Transfer of warning message to black berry

Hi,
I am working on Offline approval of Shopping cart and Purchase Order to blackberry. I wanted know how to transfer the error/warning message to black berry.
Thnks

For Account Assignment WBS element, budget check warning message. Expectation is that even if the shopping cart/PO is exceeding the budget, shopping cart/PO should be allowed for approval with the warning message. This warning message should be displayed in the blackberry.
The Budget check warning message for WBS element from ECC should be displayed in offline approval email.
I wanted to know how can we manage this situation
Edited by: a.sreenivas77 on Jan 26, 2012 7:21 PM

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

Warning message in mir4 while posting

hi friends ,
In miro while we post the parked document then it display the warning message as "RG23 Part II posting not yet done" , when we click on enter , the document is posting . But the user wants that as an error message not the warning message. So please tell me in what way i can get the solution.
with regards,
prasad.

Hi
1. Setting up Vendor/Customer is OK to get net balance as you said
2. Spl GL account to track share capital also seems OK
3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
Regards
Ajay M

BADI/user exit for ME21N - Warning message for "our reference" field

Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
Ahmad

Hi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal.

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

How to use warning message

Hello everyone!
The message type of 'w' should have a yellow symbol on the status bar, right?
But when I execute the code below, it produces the red symbol (X)...
REPORT zmsgsamp
       MESSAGE-ID s1.
SELECTION-SCREEN BEGIN OF BLOCK a.
PARAMETERS : p_value TYPE i.
SELECTION-SCREEN END OF BLOCK a.
START-OF-SELECTION.
IF p_value EQ 5.
    MESSAGE w899 WITH 'Warning message'.
ELSE.
    MESSAGE i899 WITH 'Information message'.
ENDIF.
Thank you!

Hi Ricardo,
Atish is correct. We cannot predict the color of the warning. Even though the color of warning displays like error, the functionality of warning will take place...
if you put your same piece of code under at selection-screen, warning message with yellow color will be displayed....but inside the start-of-selection..it display like the error message.

Many message From : Local4.Warning Message from Kiwi? How fix it?

Similar Messages

Maybe you are looking for