Many of the times my Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore but still not working.. please help me..
My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..
Please do not double post a subject. Iphone 5S I answered your other thread.
Similar Messages
-
Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.
Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
i can't open my itunes , i tried to delete it and install it back already but still not working , please help
No , it is something crushed in my computer ? i keep re-download it and tried to download some old version itunes my computer is a Window 7 . i can't backup my iphone and ipad now pleses help , thank you
-
my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
Whenever I go to facetime on my macbook air it says call failed. Both my WiFi and Facetime are connected. I tried turning my Facetime on, and off,yet it still does not work. please help.
Hey Ekfree95,
Thanks for the question, and great troubleshooting so far. The following article provides additional steps that may have to resolve your issue:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Thanks,
Matt M. -
I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help
Find your serial number quickly
Download CS6 products
Activation & Deactivation Help
Mylenium -
Can anyone help me please?
You probably have other things on the iPad that are taking up a lot of space.
What you'll want to do is connect the iPad to your computer and select it on the sidebar in iTunes. It will show you a bar along the bottom that tells you what is taking up space.
TV shows can fill up the space pretty quickly, but you should be good with even a 16GB iPad 2 if you can see what might be taking up the space.
Post here what the bar says and we might be able to figure it out if it isn't something you figure out with that information.
As an example, let's say that it says Photos is taking up 15GB, then you would go to the Photos tab and disable syncing of them altogether, or limit what it syncs. The same would be the case for any of the other stuff that takes up space. -
I was here a while ago about the flash player not working. I downloaded 9 and it worked for a little but some how I would have to keep re instaling it. Now it is installed but not in manage add ons. The only thing is adobe reader. I can see the other adobe programs in my contol panel programs but no where else. I would like to get 10 working so i can stop trying to figure it out. I have read the threads before and trie everything. My settings are all on enabled actve X. I see the programs are installed but 10 wont install 9 is installed but will not work. PLEASE HELP.
I fixed it. I downloaded Spotless then disabled, then re-enabled Spotlight; restarted, and it's working.
-
Java command still not working - please help
i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath <path> Specify where to find user class files and annotation processors
-cp <path> Specify where to find user class files and annotation processors
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-proc:{none,only} Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path> Specify where to find annotation processors
-d <directory> Specify where to place generated class files
-s <directory> Specify where to place generated source files
-implicit:{none,class} Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-version Version information
-help Print a synopsis of standard options
-Akey[=value] Options to pass to annotation processors
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html] -
Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
Any one got any ideas, TIMHave you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes
iPod touch User Guide (For iOS 5.1 Software)
Are you connected to wi-fi?
If not, then connect. -
Please help!!!
A lot more information is needed.
Why do you believe someone else froze your iPad?
What is "everything" that you have tried? -
Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help
First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Maybe you are looking for
-
Problem with sales order and Service order
Dear Guru's We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but
-
Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade
Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.
-
We just migrated our EJB from 1.1 to 2.0 and Toplink 3.6 to 4.6. We refresh Toplink cache when some extenal system change the data in our database. It was working great before migration but it stopped working after that. Is there anybody who can help
-
BOMM to Information Steward 4.2
Hi, We are in process of moving to information steward 4.2 metadata management from Business Objects Metadata management (BOMM). Can someone please provide following information. 1. New features available in Information Steward Metadata management mo
-
Hi all, I am busy migrating from Jheadstart version 10.1.3.1 to 10.1.3.2, but now I am stuck with some binding issue. I can generate my application without no errors, but when I try to access a none default tab I get a 500 error. An example incl. sta