Many pictures in one big canvas?

Hi
I want to add several pictures and put them into one giant canvas on Photoshop, but I am not sure how to do this. Does anyone know how this is done?
Thx
Photoshop Newbie

c.pfaffenbichler wrote:
In case you may want to resize the various images (collected into one psd, tif or psb as Tai Lao explained) more than once it might be advisable to Convert them to Smart Objects to avoid unnecessarily decreasing image quality by repeated transformations.
If this is about Photoshop CS5, that extra step may not be necessary since images dragged or pasted into a document are now converted to Smart Objects by default, unless you disabled the new preference for that.
It should be possible to simply drag images in and then start playing with layer opacity, blending modes, and masks until you get what you want.

Similar Messages

Mosaic - A bunch of different small pictures make one big one

Is there a good software title or plug in for photoshop that will allow me to make a mosaic picture, (the ones where a bunch of smaller pictures fit together to make one large one)?
I googled it but all I could find was online services that do it online for you over the internet. I would like the actual softwre.
Any help would be appreciated.
Paul W.

I tried it with standard .jpgs from two different sources. My camera and photos from a professional photographers photo shoot so I do not think it is that. The photos I used worked fine with the Mac OSX screensaver mosaic...
Also, When I selected a small amount of photos it did not complete the image. It looked like nothing but random small pics with a ton of white space around them. When I selected a lot it crashed. Also, it always stops at about 78% complete. I was weary as to how well it would work being free and all.
That being said, if there is one that works really well (as in as good as the Mac OSX mosaic screensaver) I would buy it. I just cant find it.
Thanks for the suggestion though
Paul W.

Converting several pictures into one big picture.

Hi guys, I'm new here..
for the last hour I've been browsing the forums trying to find an answer to my question but unfortunately, I couldn't find any satisfying answer.. maybe it's because this whole forum system is pretty new to me, or maybe because I'm not that good at English so I'm not looking for the right key words..
anyway.. I'm using Adobe Photoshop Elements 4.0 for quit a while and I got one thing I can't sort out..
here we go..
let's say I have about 100 pictures, all of which are at the same resolution and pretty much same quality.. I want to make all these 100 pictures into 1 picture which will have all these pictures one under the other.. or maybe two pictures every row (two pictures under two pictures)..
I hope I explained myself good, cause that's the best I can do..
thanks a lot guys, hope you will be able to help me.

I'll start you out with something that is my interpretation of what you want. If I'm wrong, at least we'll have a starting point as you tell me why it won't do what you want. :)
Since you say you're using PSE 4.0, make sure your View is set to either Tile or Cascade, and get the Layer Palette open.
Create a new blank document (File>New>Blank File). In the set up box, select the size you want and set it to the same resolution as that of the pictures you want to put on it. Depending on what your goal is, you can choose it to have a transparent background, white background, or you can choose a color. Leave the new blank file open on your desktop.
Now open a couple of the image files you want to move. (DO NOT put them in that silly Photo Bin - have them open on your desktop!) Assuming you want the entire picture moved, do a Control>A or Select>All and get the marching ants around the entire image. Now do either a Copy/Paste to the new blank document or (my favorite), choose the Move Tool and simply drag and drop the selected image to the new canvas. You'll see that the new picture goes on the new document in a separate layer, and you can also use the Move Tool to shove it around and get it where you want it. Now you can close the image that's been moved and go on to the next. Repeat until you have all the images moved.
So... How far off am I?!

How do I send many pictures at one time?

Hos do I send meny pictures fr.o.m. My ipad tofriends at one time?

If you have iCloud, you can share photo stream.
iCloud: Photo Stream FAQ

Is it Ok to put many classes in one file ?

Hi all,
This is another beginner question. I was wondering, is it good practice to put many classes in one single file? Sometimes I notice there are many classes inside one big file and sometimes each class is in its own separate file. Is there an advantage in separating each class in each different file? For e.g. one big file, called A.java:
class A {
    public static void main(String[] args) { }
class B {}
class C {}
class D {}Is it better to have class B in a B.java file, and class C in C.java, etc? In the real-world workplace, what is the usual practice?
Thank you for your replies.
P/S : I love Java, it's so cool. :-)

I have also seen situations, in large software systems, where a compile that fails partway through will leave the top level classes that do not match the file name unbuilt, and some compilers will then not be able to build, because they cannot map the class name to the source file.
? {?

One Big Clip

Is there a way to merge many clips into one big clip and keep it in the same bin. You can do thie with Edius. It's convenient when you have many clips of one subject. You have them in sequential order with timecode. It's helpful and fast in news editing.

This worked for me. I selected all the clips that I wanted to use. Right clicked and chose New Sequence From Clip. It created a new sequence with all the clips in order. I just renamed it and I'm using it as the source.

Many small purchases, or one big one?

Hello, I'm actually really new to the credit world and just got two cards, a Chase Freedom and a Discover IT for Students. I want to get started building my credit and increasing my credit limit. I realize it's a slow process, (and maybe getting two cards at once wasn't the best idea) but I want to make sure I don't needlessly slow down this process.
My main question is, are many small purchases in a month better than just one big one, or does it even matter?For Example…
Chase Freedom CL: $1200
Discover IT CL: $1000I was hoping to use these cards to make payments on my tuition. If every month I only spend a $200 payment from my Discover card, is that better or worse than just buying 20 items at $10 apiece?Again though, the ultimate goal is to increase my CL and CS.

Great cards to start on. I wish I had gotten two in college. I just graduated and got my second. Like others have said, the amount of charges doesn't matter as long as you keep your overall and individual util at or under 30% which you would be doing at the charges you're describing. if need be, don't shy away from making multiple payments in a month to keep your util low while using the cards as much as you like (responsibly, and within your need/ability of course) while earning the rewards. Enjoy building. You're definitely off to a good start!

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box , as I can see on my classroom book and in many tutorial.any one can help please

I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box ,where i choose what i want to import, as I can see on my classroom book and in many tutorial.any one can help please ? thanks

I have the same problem... but the photo library is neither on my iPhone or my Computer!! Please help.. its taking too much space.

Many little datafiles or one big datafile?

Hi all
I have a database which grows every day. I have 10 datafiles with name users01.db , users02.dbf and etc.
And all these datafiles have 1.5Gb size. Each time every datafile reachs it's 1.5Gb size, I add new datafile. Is it correct strategy? Or I must add only extents to last datafile and allow it to grow?
Thanks...

Hi,
In my point of view, it is a good approach if "table striping" is used, where data is spread across more than one device. Otherwise, if you have just one disk, then I don't see advantages or disadvantages. In addition, take a look at [url http://forums.oracle.com/forums/thread.jspa?messageID=1041074&#1041074]more small datafiles or one big datafile for tablespace thread.
Cheers
Legatti

I have so many pictures on my photo stream and camera roll. I synced them to my computer, the ones on my photo stream. can I delete the pictures in my camera roll? and still have the pictures on my computer? or do i have to save them from icloud folder to

Hi, i am an idiot when it comes to this. I have so many pictures on my photo stream and camera roll. i cant even take anymore pictures or even update to ios7. I synced my pictures to my PC, i think. can i know delete my camera roll or will my pictures disappear from my computer? im so confused!!

If you delete photo stream photos from your phone they will be deleted from the my photo stream album on your PC. Before doing that, be sure to copy or move them to a different folder on your computer.
Deleting camera roll photos won't delete anything from your computer. If you import them to your computer using your usb cable as explained here: http://support.apple.com/kb/HT4083, you will get an option to delete them from your phone after they are imported.

How to split one big master clip into many?

Hi,
This is probably a simple question for you pros. Thank you for reading.
I have film that I've telecined onto a DV. However, FCP imported a one hour tape as one big master clip. Is there a way I can split this master clip into several small clips so I can organize my project?
Does that make sense?
Thank you in advance,
Nik

Since you telecined onto DV I guess there are no Date&Time gaps between scenes, so you cannot use DV Start/Stop Detect. Then the only way I can think of is to do it manually: open the clip in the viewer, select the first scene by setting its IN and OUT points, edit to the timeline, back to the viewer select the next scene setting a new pair of IN and OUT points, edit to the timeline, etc.
If you prefer you can move each new clip to the browser, and collect them together into a bin, before editing them to the timeline.
Piero

How do I move pictures from one iphone to anothyer?

how do I move pictures from one iphone to anothyer?

sync with a computer
sync with icloud
restore one with the backup of another
airdrop
there are many ways

Moving pictures from one iphoto library to another

Hello all, I have a simple question.
I have all of my pictures on one computer in an iphoto library. I have a new imac (it's quite lovely) and I would like to move all my pictures to that mac. Which folders do I need to copy and move to my new computer? I would like to keep albums, etcetera.
Normally I would just transfer all my stuff from one mac to the other and voila, it's done, but I have done that so many times that there is a problem with my User info and it has followed me from several computers now, so I am starting fresh. I would like to keep my pictures however. Which also leads me to my next question. Could someone suggest a good way to archive my 40 some-odd gigs of pictures?
thanks in advance.

Re: Copying the Library - Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions in the Library.
Re: Archiving: There is no permanent storage solution for digital material. Yes DVDs do offer longevity but even the most expensive are prone to problems eventually. The cheaper ones sooner! To my mind the best option is to have a variety of solutions, on- and off-site. Optical media, Hard Disks, Online Storage solutions should all be used - and more importantly - checked regularly.
Regards
TD

Variable number of two dimensional arrays into one big array

I have a variable number of two dimensional arrays.
The first dimension is variable, the second dimension is always 7.
i.e.:
Object[][] array0 = {
{"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"},
{"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"},
Object[][] array1 = {
{"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"},
{"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"},
Object[][] arrayi = ...I'm generating these arrays with a for-loop:
     for (int i = 0; i < filter.length; i++) {
          MyClass c = new MyClass(filter);
          //data = c.getData();
Where "filter" is another array which is filled with information that tells "MyClass" how to fill the arrays.
"getData()" gives back one of the i number of arrays.
Now I just need to have everything in one big two dimensional array.
i.e.:Object[][] arrayComplete = {
{"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"},
{"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"},
{"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"},
{"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"},
Any idea on how to accomplish this? It's blowing my mind right now.

Just brainstorming here:
Why not put your actual data in a class and store that in a LinkedList (so you know the total number of elements for your multi-dimensional array). Then initalize your multi-dimensional array and populate it? Haven't tested the following, but thinking something along the lines of
public class MyData {
     //data here
     public Object[] toArray() {
          //something similar to this
          return new Object[] = {"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"};
LinkedList<MyData> data = new LinkedList<MyData>();
data.add(mydata1);
//however many times you need
Object[][] arrayComplete = new Object[data.size()][7];
for(int i = 0; i < data.size(); i++) {
     arrayComplete[i] = data.removeFirst().toArray();
}Another option for knowing how many rows you would need might be using something like:
int rows = 0;
rows += array1.length;
rows += array2.length;
//etc...But is not entirely useful if you don't know how many variable arrays you have (although reflections might help if the name of the array variable is incremented systematically, someone told me earlier to avoid reflections since it could make debugging a LOT more difficult).
Edited by: bogdana on Apr 1, 2010 10:38 AM

How do I combine two or more pictures into one?

How do I combine two or more pictures into one?

I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else. I wanted to put several photos from a file onto a new blank image. This is what I did.
1. Create a blank page.    File/New/ Blank File.   Put in the size. I used 8x10.
2. Bring the photo you want to use into Elements as you always do. It will list along the top next to the blank sheet.
3. Choose SELECT (top of screen)/ Select All.
4. Choose Edit/Copy   or Command "C"
5. Click on the Blank File.   Chose Edit/Paste or Command "V"
6. Click on Image/ Transform or Command "T". There should be a dotted line around your pasted image. You can then move and adjust the image to how you want it. When finished, press the check-mark on lower right of photo.
7.   Repeat this with all the photos you want on the new blank file.
8. You will see on lower right of Elements, the background layer and as many layers as you have photos. These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible. This will merge all layers to the background.
9. Save as and you are done.

Many pictures in one big canvas?

Similar Messages

Maybe you are looking for