Many printers and chose the print to print by
i want to buy many printers , then install every printers in my pc , can i chose any print to print by e-mail
Hi annozily, welcome to the HP Forums. Each ePrinter can be assigned its own unique hpeprint email address to assign prints to. Here is some more information on HP ePrint:
Getting Started with ePrintCenter
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Similar Messages
-
I have set form fields as User required and yet the form still prints/save when empty.
I have set form fields as User required and yet the form still prints/save when empty. I also have an email button on the form but that works correctly by not allowing the user to email the form with the required fields empty.
What script do I need to additionally restrict both printing and saving if the required fields are empty?
You would think that just setting that option would restrict those functions the same as it does for the email button.
Please be specific with your response if you are gracious enough to offer one. I have been searching the forum all morning for the answer to this and I really didn't understand any of the solutions offered to others enough to use those in my own form.
The required fields are:
Social (social security number)
Name
Headquarters
Residence
The next question I have is if there is a way to make individual signature fields mandatory if they are digital signatures?
In other words, I don't want the individual to be able to email the form to the next person if he/she hasn't applied their digital signature.Saving can always be done, even when mandatory fields are empty. This is by design. And that is correct. Suppose you have a big form and 2 people need to fill it out. How can you fill out a first part and then send it to the second person without saving.
Same for printing. Same for your signature fields.
What I would do, is to put a "watermark" on the form that you show on preSave and prePrint if the form is incomplete. Just a static text on your form. Then the user will see that they need to do more. Also, on preSave and prePrint, you can show a warning popup to tell the user about the missing fields. You can then still cancel their action if the user decides not to save/print anyway. -
I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?
You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions. -
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Photosmart 7520 does not grip and feed the paper to print..
Hi-- I have a sparsley used Photosmart 7520 AIO that does not properly feed the paper to print. An HP Utube video had several olutions suggestions that did not work. THe display screen thinks the machine has no paper. Any ideas? Seems like it should be a small easy problem but nothing seems to fix it. Thank you.
Happy Wednesday @Pauline49 and welcome to the Forums!
I read about your print jobs getting stuck in the print queue's on both of your computers, and I am here to offer a few suggestions to you that should help.
I would first recommend trying a Firmware Update for the printer. As you are connected VIA USB, you can download and run the update here from your Windows 8 PC: HP Photosmart 7520 series firmware update
Restart the printer afterwards.
Also, there could be many reasons as to why the jobs are getting stuck in the print queue. Check out these guides and try out all of the steps and they should help you:
Print Jobs from Your HP Printer are Stuck in the Print Queue
Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8)
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Delete records in a table and at the same time print out for reference
I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone helpHow about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3 from all_objects
4 where rownum <= 10
5 /
10 rows created.
SQL> declare
2 cnt pls_integer;
3 begin
4 delete from t;
5 cnt := sql%rowcount;
6 dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM -
How to Extract Data from IT 0025 and Modify the layout for Printing
Hi All,
Query----> My client has a requirement to output the appraisal data in a given format from IT 0025. (The entire appraisal done for the employee)
I would like to know from where this data will be picked up is this data stored in some cluster table and how can we change the layout for printing in the desired format?
Note: PA and PD is Integrated. When we create appraisal in IT 0025 no record gets created in PA0025, in which table does the record gets created and how to retrieve the data?hello,
normally stored in pa0025.
are you using the old or new appraisal system?
if you are using the new one. its not stored in pa0025 it is done with relationships..
regards
stefan -
This *****! I updated my Itunes, and it asked me to choose a library, and I chose the wrong one, and now I can't change it. What am I supposed to do now?
Firstly, I caution your approach to allow users to alter the orientation of the report. Crystal Reports doesn't adapt too well when the orientation is modified. You'll end up with fields dropped off on the right hand side of the report, or with a large gap on the right. Our engine doesn't do any auto adjusting of fields when you alter the orientation.
In order to see the changes it is best to re-load the page and get a new viewer. You can choose to store the ParameterFields in a Session variable for re-use on the post back so your users aren't re-prompted for values. -
Having trouble downloading iOS 7 to my iPad 2!!!!!!! Need help!!!! Tried many times and gives me error message!!
If you are using OTA (over-the-air) update on the device itself (Settings>General>Software Update and only available under iOS 5.x or above), try updating it through iTunes instead by connecting the device to your syncing PC.
See: http://support.apple.com/kb/HT4623
Be sure and click on the section entitled "Update your device using iTunes". -
Hi iv added iCloud to my iphone5 and by doing so I've now lost all contacts, photos and also my iMessage please can someone help me to restore my phone back to how it was before doing this? I went to backup and chose wrong backup date and I'm now stuck. This is driving me mad PLEASE someone help??
As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you. -
My password has been attempted too many times and now the phone is disabled?
My phone is disabled after too many password attempts. I have tried to disconnect the USB from the phone, turned the device off, held the home button and reconnected the USB to the phone . I held the button until I got the connect to iTunes screen and clicked ok to restore the device however I receive the msg that it cannot connect to iTunes because it is locked with a passcode???
Hi Eagles08,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy -
Apple Application Support not in my programs, cause one advice said uninstall everything associated with itunes, so i did and now the it does not get redownloaded. what can i do.
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
One-to-many mapping and update the many part
Hello !
Here's my problem,
I've got an object A having a vector of object B.
The mapping in toplink is one-to-many with the back-references set in B.
Insertion : no problem.
Now i would like to change the Vector of B (inserting new B, updating existing B) in a function with the Vector vC (modified vector of B).
What is the best way to do this ?
I tried many thing but either I have toplink 6004 error, or doing it by removing all elements of the Vector (deleting all B in database), and then setting A with C (recreating all object in the modified Vector).
Another way to explain my case:
how to do this in UnitOfWork ?
function modifyAVectorOfB(A, vectorOfC)
AClone = uow.registerObject(A);
Aclone.setVectorOfB(vectorOfC);
uow.commit;
(and in database all existing object in C are updated, new object in C are created, removed object in C are deleted)Have found a solution, read all object in the modified Vector, read the modified object in the Unit Of Work with readObject(B) (So i get the database or cache version) and then comparing it with the modified to change what is needed to be change.
-
I have gone to Safari preferences and have made the selection in TABS to open links in TABS instead of Windows. I have chosen "Always".
The setting has not stuck. I tried logging out then logging back in however it still does not work. Am I missing something?I did not have any extensions and reset Safari. I have the most update versions as per screenshot
I downloaded youe app and below are the results;
Hardware Information:
iMac (27-inch, Mid 2010)
iMac - model: iMac11,3
1 3.2 GHz Intel Core i3 CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
OS X 10.8.4 (12E55) - Uptime: 0 days 1:23:37
Disk Information:
ST31000528AS disk0 : (1 TB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 993.77 GB (937.7 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 5.57 GB (5.56 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.sophos.kext.sav (8.0.4)
com.trusteer.driver.gakl_driver_2 (1)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.sophos.autoupdate.plist
[loaded] com.sophos.intercheck.plist
[loaded] com.sophos.notification.plist
[loaded] com.trusteer.rooks.rooksd.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] com.sophos.uiserver.plist
[loaded] com.trusteer.rapport.rapportd.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
User Login Items:
Cobook
Officejet Pro 8500 A910 [2DB56A]
Mail
Dropbox
AdobeResourceSynchronizer
TomTomHOMERunner
BlackBerry Device Manager
3rd Party Preference Panes:
Flash Player
Flip4Mac WMV
Rapport
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Unity Web Player.plugin
Bad Fonts:
None
Top Processes by CPU:
2% WindowServer
2% WebProcess
2% EtreCheck
0% Safari
0% InterCheck
0% mds
0% fontd
0% Microsoft Excel
0% rapportd
0% BBLaunchAgent
Top Processes by Memory:
242 MB WebProcess
152 MB InterCheck
143 MB Finder
131 MB Safari
127 MB Microsoft Excel
106 MB Mail
94 MB WindowServer
70 MB mds
66 MB Dropbox
49 MB Dock
Virtual Memory Statistics
79 MB Free RAM
1.71 GB Active RAM
1.76 GB Inactive RAM
461 MB Wired RAM
289 MB Page-ins
0 B Page-outs
Maybe you are looking for
-
Voice memos recorded since iOS7 missing when syncing
Hi All, I regularly use voice memos to record lectures on my iPhone 4 and then transfer to computer for editing. However, since I installed iOS7, all voice memos recorded since then show up on the phone itself, but not in iTunes (or the DeTune App)
-
Command-F not working in Safari
All of a sudden, command-F (find) stopped working in Safari (5.1.7). Choosing Find from the Edit menu works fine. I checked the keyboard shortcuts in Systems Preferences, and there is nothing for command-F. Is there anywhere else to look? Thanks.
-
SAP B1 G/l accounts updation
Hi SAPSERS, We have a client who is using SAP B1, and they have a third party employee pay role software. They will post all the advances and any transaction in that software. Those transactions like P.F., Loan deductions should be updated in SAP B1
-
Liquify filter gives an error message
Hi there i am having trouble with my adobe photoshop. when i click on liquify filter it will bring up the page (you cannot see me picture) it is just a square with grey and white sqaures. it then comes up straight away saying "adobe photoshop has sto
-
Hello, We are in 10g ... I have to compute COUNT DISTINCT of customers, per month, and YearToDate. Per month, I think I found it out ... On the year to date ... I have no clue at all ... and I hope that you could provide me with a solution or advice.