Many problems with IOS8 in Ipad retina

After the upgrade to IOS8, my Ipad retina doesn't work properly in many aspects: wifi connection, watching videos in safari or youtube, safari performance, closing apps, finger gestures, etc. Please, we need a patch to solve urgently all this issues!!!!!
KR.

It's not a simple procedure for a beginner.
Thks.

Similar Messages

  • Problem with ios8 on iPad 2

    Since I installed iOS 8  on my ipad 2  I have many problems, the most important are the loss of cellular signal and the signal to hang up the only way is to restart it, not to mention the slowness that wasn't there before. How can I solve the problem? Thank you.

    Hi ale.sbt,
    I apologize, I'm a bit unclear on the exact nature and scope of the issues you are describing. If you are having multiple issues after upgrading your iPad to iOS 8, you may want to first try resetting your device:
    Turn your iOS device off and on (restart) and reset
    If you are still having issues after the reset, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPad to factory settings and testing it in that default condition to see if the issues persist before restoring the apps or your data. You may find the following article helpful:
    Use iTunes to restore your iOS device to factory settings
    Regards,
    - Brenden

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Having many problem with wifi....after installing lion......

    Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

    I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
    Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
    Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
    Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
    Tab through the Mask settings to default those.
    Then set the default gateway to your router's IP address.
    Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
    Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
    That's what got my connection running.

  • Many problems with the 'Export to Text' (.txt) in CR Xi

    Hi,
    I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
    These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
    - Multi-columns layout do not export as Multi-column (export only a one column);
    - Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
    - Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
    - Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
    - 'Keep Group Together' flag is not working.
    - 'Reset Page Number After' simply does not works when exported to text;
    - 'Keep object together' on TextBox/Section is not working.
    - Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
    I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
    If still supported, when will these bugs be fixed???
    Thanks

    Hi Rene
    Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
    Regards
    Sourashree

  • I have a problem with my photoshop CS6 retina display

    I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option is off. it is appear gray color. I couldn't click on it. please help me.

    Mac Perpetual CS6 current version is 13.0.6 the subscription version is version 13.1.2.  How are you trying to update to 13.1.?? do you have a Creative Cloud Subscription?
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

    I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • Hy, I have a problem with a new iPad Mini.

    Hy, I have a problem with a new iPad Mini.
    When I try to use the cameras, it doesn't work.
    I get to take 3-4 pictures and after that all I see is the shutter.
    It happends even if just start the camera app, or the facetime app, after 4-5s.
    I've reinstalled IOS 6.1 but nothing changed.
    It is a new ipad. What can I do?

    Ok, Orange Romania changed my iPad mini but now I have another problem.
    I bought the iPad mini on 01/feb/2013, took it to service on 06/feb/2013, and got another ipad mini on 12/feb/2013.
    But the new ipad mini keeps requesting the password for some user [email protected], and it does it from the first day of activation. This is suspect for me, so I checked it's serial with selfsolve.apple.com and it shows "Estimated Expiration Date: January 31, 2014" and since it has one year free service I am worried the iPad mini wasn't new.
    Please help.

  • I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    Further info - I changed my security settings to allow apps from anywhere, and again tried to install.  I again got an error message
    that the update failed to install, and to contact Customer Support.

  • Many problems with iPhone 3gs.

    I've been having so many problems with my iPhone 3gs in the past few days, These things aren't cheap, and money is tight. For about 2 days, My home button, speaker, microphone, and charge port (On the iPhone) Would not work whatsoever, I have been asking on just about every website with the word Apple in it, trying to diagnose what's wrong with it. I tossed it from the roof of a Sedan, A careless mother left her young child in the carseat on the roof, and as I ran to grab it, It slipped out of my hand. Not too bad of a toss, No cracks on the screen, But I couldn't do a Hard Reset, Or put it in DFU Mode. So after hours and hours of plugging in different cords, plugging those diferrent cords into different computers, and wall chargers, and even buying a new wall charger for 40$! I get a small glitch of battery charge. But now, It will only charge when the iPhone completely dies, and then it will charge to 5% and repeat (If i'm lucky). I basically have a 200$ Paperweight. The iPhone doesn't have a warranty anymore, And i'm not looking to spend hundreds to get it fixed, I never opened it, and it has never been Jailbroken. I can't restore it because when I put it into Recovery Mode, It still wasn't getting recognized by the computer. I just want my iPhone fixed, or at least a replacement, I used this for just about everything, I can't even create a backup file of my data. The iPhone is not only Unrecognized by iTunes, But it's as if the Charging Port in the iPhone isn't even there! There is no damage to the Charge Port itself, But around the case area is a crack from the fall. Please get back to me ASAP! This is a huge inconvenience!

    Well, just so you understand, you are not addressing Apple here. We are users just like yourself that try to answer technical questions from other users. It appears as though the fall has created numerous hardware issues for the phone, that is why you cannot seem to get the phone to restore or get it to be recognized in iTunes. Since the phone is out of warranty, you have two choices. You can take the phone to the local Apple Store and see about an Out of Warranty (OOW) replacement. This is for phones that are out of warranty and do not work. OOW for a 3GS would run $149/USD here in the US. Not sure if that is where you are or not. The second choice is to Google for a 3rd party repair facility and see if they can fix it and what they would charge. The rest is up to you.

  • I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button)

    I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button). Anyone out there can help. Thanks.

    I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing.  First I would suggest that you update your iPad to the newest iOS update.  If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar.  If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.

  • I'm having to many problems with Lion freezing up and want to go back to Snow Leopard,how can I do this?

    I'm having to many problems with Lion freezing up and want to go back to Snow Leopard,how can I do this?

    How to revert your Mac to Snow Leopard

  • HT201365 Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much

    Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
    Lydang
    <E-mails Edited by Host>

    Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
    Lydang
    <E-mails Edited by Host>

  • TS1398 I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And i had checked with my rout

    I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And I had checked with my iball baton router with the iball sevice provider.

    Hi there Paula120,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Having network profiles is causing so many problems with applications

    Perhaps someone could explain this to me, because i must be doing something wrong.
    We have 10.4.6 client machines, and a 10.4.6 server. They login and their profiles are on the server and accessed via AFP, ok all is well there.
    But ever since Tiger (Panther never had this problem) having network profiles causes so many problems with applications. Here are just some examples:
    1. MS Office 2004 programs will sometimes say all the system fonts are corrupted when they are not. The only way to fix this is to log the user out and delete the Microsoft preferences folder from their network profile from the server. Doing it from the client doesn't work unless you get them to logon in safe boot.
    2. Office 2004 will also randomly not save documents or autorecovery files, claiming that "too many files are open" or that the disk is full, when their profiles have 100s of megabytes left.
    3. Safari will randomly stop working. When you load up Safari it will load up websites all distorted, and then eventually give up and force quit. The only way to fix this is...again deleting the Safari preferences from the server whilst the client is logged off.
    4. Adobe Photoshop files will randomly corrupt, causing "End of file" errors when files are opened.
    Now i've narrowed it down to the basic fact that the clients are using network profiles via AFP. I've experimented them logging onto the server and using local profiles and the programs all work perfectly. My setup is exactly the same as it was on Panther, and panther had none of these problems.
    Surely i am not the only one who is experiencing this?

    Do you have the "Inherit Permissions" option via POSIX access enabled for the home directory share point? If so, disable it, as home directories need standard POSIX permissions.
    I've seen some problems with third-party applications - namely Adobe CS2 - when using network homes mounted via AFP. Others have reported problems with Office 2004. There are other oddities, even observable in the Finder, mostly due to changes that enabled metadata (Spotlight) for AFP. However, never have I seen Apple applications like Safari not work correctly with network homes; thus, there might be another problem here.
    I'd check the filesystems for all volumes on the server using Disk Utility and repair any damage found.
    You may want to consider using Portable Homes for better compatibility with Office 2004 (unfortunately).
    --Gerrit

Maybe you are looking for

  • Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

    Hi Everyone. I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider. Logic of the code is as following while <more data> CALL RSDRI_INFOPROV_READ reading data in E_T_DATA Append lines of E_T_DATA to EO_T_DATA. If total l

  • Restoring/Formatting my ipod classic?

    After replacing my ipod classic for a third time, the sales representative, to test my ipod, plugged it into his mac. The ipod began to optimize itself for a mac. he assured me this was no problem, and so I went on my way. When I home, I plug in the

  • Can anyone help? Nokia 7373 too quite!

    I have the Nokia 7373 and have put all my music on but the volume on full is not enough when out and about. Is there anyway to make it louder? New headphones etc. ThanxMessage Edited by angelx1974 on 26-Mar-200704:17 PM

  • Fluid layout since the beginning

    hello. i have a website with a fluid layout. in the website i have only one element that is "fluid" (it's kind of a mediaplayer which is suppoused to be always in the center of the page). i write some line of code...and it works...but only if i resiz

  • Error creating Stored procedure

    Hello All, I am logged in as "system" user and trying to run the below script. create or replace procedure verify_job_not_running (my_job_name IN varchar2) AS my_job_count NUMBER; BEGIN select count(*) into my_job_count from dba_datapump_jobs where j