Many sites have error message "message from webpage" {object error} which freezes system and cont/alt/del is only solution..HELP?

Primarily happens when I am researching on the web, happens with IE and Google. Makes no difference if site is secure (s) or not. Running windows 7 home edition on a samsung laptop and have cleaned with Advanced SystemCare 6. Have also used Smart Defrag 2. Could it be my internet connection?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Similar Messages

I recently bought a neew ipad mini and have sync messages from my iphone. Which worked fine. I just picked it up and I have only to messages and can't figure out how to get back to the screen with the inbox and other folders?

I recently bought a mini IPAD and have sync messages from my iphone. Now I am stuck under group message and can't get back to the main screen that has the inbox and the various folders. Help???

youngkristen wrote:
So, our hope was we could just hook up the external to the mac and have it transfer seamlessly. Is there any hope of that?
Yes there is, scroll down to the bottom of the following Switch 101 article and click on the arrow next to Manually migrating.
Switch 101: Migrate your Windows files or system to your Mac

I moved a lot of messages from different profiles into a new profile and obviously that did not work. Help.

The messages i moved from different profiles show up in Thunderbird below folders I have set up. Here is an example:
!%26!AAAAAAAAAAAYAAAAAAAAAEar6xxG3IpIp77Cdd9KJ%2FjCgAAAEAAAAMR3mYqi1U1OmSpmool4dwEBAAAAAA%3D%3D%40graphicadd.com.wdseml
Can anyone understand what I have done and help me fix this problem? Thanks.

see that wdseml part..... that means that they are files created for the sole purpose of allowing the ever so slightly intellectually disabled windows search to find emails. '''They are not emails'''. They do not contains any attachments!
Emails are stored in files with the same name as the folder you had them in inside Thunderbird... so the inbox folder in Thunderbird will be the inbox file. To make it easier there is always an MSF file with it. So in this case inbox.msf.
Using this add-on https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/ you can import these native MBOX files into your current version of Thunderbird.

Message from webpage no object then my computer freezes

i have HP Media Center PCm7334n desck top computer windows xp when i get on internet a message box apears . in it says message from webpages object error. then my comp. freezes. any suggestions

Hi,
Since how long have you been facing this issue?
Were there any changes or updates made on your computer?
What is the complete and exact error message?
Try this method.
Use the Internet Explorer (No Add-ons) mode
To do this, click Start, point to All Programs, point to Accessories, point to System Tools, and then click Internet Explorer (No Add-ons).
If this resolves the issue, follow these steps to isolate the browser add-on that is causing the issue:
1.    Click Tools, and then click Internet Options.
2.    Click the Programs tab, and then click Manage add-ons.
3.    Click an add-on in the Name list, and then click Disable.
4.    Repeat step 3 until you identify the add-on that is causing the issue.
Let me know if this resolves the issue.
THX

Help, do anyone know what to do when iPad can´t close neither open. I have a message from iCloud : not enough storage, and now I can´t do anything !!!thanks for any help

Help, do anyone know what to do when iPad can´t close neither open: have a message from icloud saying: not enough storage.. and now it´s blocked !!!! can´t do anything !!! Thank you for any help...Gyda

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Vba to dismiss an IE8 or IE9 "message from webpage" popup window

In excel or word, paste the following code into a vba normal module and run it. The code goes to a public web site and tries to lookup a school. The website pops up a "message from webpage" dialog that warns me that the the school
number is not valid.
My program can detect that popup, but how can I reliably and automatically dismiss it?
I have a workaround that uses sendkeys but about 10% of the time the popup remains.
Does anybody have a solution that does NOT require sendkeys? The ideal solution would also work when objie.visible = false.
option Explicit
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Sub t1022()
Dim objie As Object
Dim i As Long
Dim htmlTable As htmlTable ' set reference to microsoft html object library
Set objie = CreateObject("InternetExplorer.Application")
objie.Visible = True
objie.navigate "http://www.slforms.universalservice.org/Form471Expert/471StatusCheck.aspx"
Do: Sleep 100: Loop While objie.busy
Set htmlTable = objie.Document.getElementsByName("txtBenId")(0)
htmlTable.Value = 12345
With objie.Document.getElementById("txtFundingYear")
.Click
.Value = 2013
End With
objie.Document.getElementById("btnSearch").Click
For i = 1 To 10
Sleep 100
If Not objie.busy Then Exit For
Next i
If objie.busy Then
MsgBox "popup detected"
End If
End Sub

Hi,
If there is a will, there is definitely as way. The following definitely works!
Copy and paste the following code in a module.
Option Explicit
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
'Sends the specified message to a window or windows. The SendMessage function calls the window procedure
'for the specified window and does not return until the window procedure has processed the message.
Public Declare Function SendMessage Lib "user32" Alias "SendMessageA" _
(ByVal hWND As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
'Retrieves a handle to the top-level window whose class name and window name match the specified strings.
'This function does not search child windows. This function does not perform a case-sensitive search.
Public Declare Function FindWindow Lib "user32" Alias "FindWindowA" _
(ByVal lpClassName As String, ByVal lpWindowName As String) As Long
'Retrieves a handle to a window whose class name and window name match the specified strings.
'The function searches child windows, beginning with the one following the specified child window.
'This function does not perform a case-sensitive search.
Public Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, _
ByVal lpsz2 As String) As Long
Public Const BM_CLICK = &HF5&
Sub t1022()
Dim objie As Object
Dim i As Long, hWND As Long, childHWND As Long
Dim htmlTable As htmlTable ' set reference to microsoft html object library
Set objie = CreateObject("InternetExplorer.Application")
objie.Visible = True
objie.navigate "http://www.slforms.universalservice.org/Form471Expert/471StatusCheck.aspx"
Do: Sleep 100: Loop While objie.busy
Set htmlTable = objie.Document.getElementsByName("txtBenId")(0)
htmlTable.Value = 12345
With objie.Document.getElementById("txtFundingYear")
.Click
.Value = 2013
End With
objie.Document.getElementById("btnSearch").Click
For i = 1 To 10
Sleep 100
If Not objie.busy Then Exit For
Next i
If objie.busy Then
'MsgBox "popup detected"
DoEvents
hWND = FindWindow(vbNullString, "Message from webpage")
If hWND <> 0 Then childHWND = FindWindowEx(hWND, ByVal 0&, "Button", "OK")
If childHWND <> 0 Then SendMessage childHWND, BM_CLICK, 0, 0
End If

Message from webpage

Keep getting an error after logging into a web site.
"Message from webpage". " ! the following error occurred:error" There is an "OK" response box.
The page freezes and none of the options function.
This error occurs on a laptop running Windows 7 with Internet Explorer 11. [Version 11.0.9600.17501] [Update 11.0.15 (KB3008923)]
This error does not occur on a laptop running Windows 8.
Why?

Hi,
Did this issue for all websites or specific one?
Please follow these methods to troubleshoot:
1. Install the latest updates
2. Run the Internet Explorer Performance troubleshooter
3. Turn off hardware acceleration
4. Turn off add-ons
5. Reset Internet Explorer settings
The detailed steps, refer to this guide(Internet Explorer crashes, freezes, or hangs):
What to do when Internet Explorer isn't working
http://windows.microsoft.com/en-in/internet-explorer/ie-crashes-stops-working#ie=ie-11
Karen Hu
TechNet Community Support

Need help with an automating a "Message from webpage" click.

Any help would be appreciated. I guess I would consider myself as a beginner with VB.NET.
Basically - My program launches an internet explorer window. Points to a specific webpage that has records. Finds the "check all" and clicks it, then finds and clicks "delete".
I am stuck at this part. A "Message from webpage" pops up wanting to confirm the deletion of the records. I have 50 records per page and an excess of 14,000 records each day that need to be deleted. I do not have time to click OK on every single
page.
I have tried to sendkey function, which worked for a while but for some odd reason, it quit working. Someone suggested using API, which I know nothing about. Please help me! I am desperate!
Here is my code. I know the "threading.thread.sleep" isn't good to use but I need someway to pause. Like i said, I am a beginner, so please be easy!
Public Class Form1
Dim oInputs As Object
Dim oWShell As Object
Private Sub btndel_Click(sender As Object, e As EventArgs) Handles btndel.Click
With CreateObject("InternetExplorer.Application")
.visible = True
.navigate("WEDPAGE GOES HERE!")
Threading.Thread.Sleep(3000)
oInputs = .document.getElementsbytagname("a")
For Each elm In oInputs
If InStr(elm.innertext, "(Un)Check All") > 0 Then
elm.click()
Exit For
End If
Next
For Each elm In oInputs
If InStr(elm.innertext, "Delete") > 0 Then
elm.click()
Exit For
End If
Next
Do While .busy Or .readystate <> 4
Threading.Thread.Sleep(2000)
Loop
End With
Dim objShell = CreateObject("WScript.Shell")
Dim Success = objShell.AppActivate("Message from webpage")
Do Until Success = True
Threading.Thread.Sleep(1000)
Success = objShell.AppActivate("Message from webpage")
Loop
Application.DoEvents()
AppActivate("Message from webpage")
SendKeys.Send("{ENTER}")
End Sub

Hi msnyder1112,
Thank you for posting in MSDN forum.
Since this issue is related to the VB.NET, so we will move this case to VB forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance. OK

Has anyone seen the following on their WP?
Message from webpage
WARNING: Time Warner Cable Customer –
Your Internet Explorer browser and
computer may be compromised by
security threats. Call 844-600-6224 now for
IMMEDIATE assistance.
OK

This sounds like a virus or malware program that has made its way onto your computer. I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system. If this doesn't work, I would suggest you use Microsoft's Malware Removal Tool. You can download it at the link below. Hope this helps.
http://www.microsoft.com/security/pc-security/malware-removal.aspx

TimeSheet - Message from webpage __error Loading

Hi,
In Project Server 2013 we notice that for some users tasks (from some projects) cannot be added to the TimeSheet. After the user selects the specific task the browser displays the message:
Message from webpage
__Error Loading
The log files don't seem to mention anything and turning on the compatibility view mode for this web address doesn't solve this issue either.
Hope somebody can help us out.
Rgds, Frank
Frank Jutte Winvision (http://www.winvision.nl) Project Manager / EPM Consultant

Hi Frank,
It can be due to many reasons. Which IE version are those users working with?
First check for those users' permissions
Check that the users' projects and/or assignments has not been delete in the project
Try to delete the timesheet (or recall if submitted)
Try to delete in Project Pro assignments and tasks and create them again
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

When I open Itune, I have this message from windows: l'exception instruction privilégiée (0xc0000096) s'est produite dans l'application à l'emplacement 0x02fb21d4. After I close the message, Itune close.

When I open Itune, I have this message from windows: l'exception instruction privilégiée (0xc0000096) s'est produite dans l'application à l'emplacement 0x02fb21d4. After I close the message, Itune close.

I think we might try the following document with that one, madubc:
iTunes 10.2 for Windows: Quits unexpectedly with "Unknown software exception (0xc0000409)" alert
(The theory with that procedure with installing Safari 5.0.5 is that it updates your Apple Application Support. Apple Application Support contains single copies of program files used by multiple different Apple programs (such as iTunes, QuickTime and Safari) so the effect of updating it is that iTunes and QuickTime program files will also be updated.)

MAX - Message from Webpage

Greetings Everyone,
Sorry if this has been posted in the incorrect forum.
When I am using MAX and select the Calibration Tab for the PXI-5114 or PXI-4065 a dialogue box "Message from Webpage" appears as displayed in the attached picture. I've installed Labview and TestStand on two (2) other stations and haven't encountered this issue. Other than re-installing the entire software package as the message states, is there a way to resolve this issue easily? Thank you in advance for any comments that you may provide.
Regards,
Scott
Attachments:
MAX_MessageFromWebpage3.JPG ‏52 KB

Hi Joshua,
The funny thing is that starting MAX and then clicking through the tree and clicking on "4:NI PXI-4065 "PXI1Slot4", the Show Help in the upper right corner is un-ghosted. Once you click on the "Calibration" Tab, then the message from webpage appears.
Since you mentioned the Help in the far right, I clicked on that before clicking the Calibration Tab and I get the same message. The funny part is the Help file appears. I guess if the Helpasst.dll can't be found is not hurting the performance of the software then I guess I won't worry about it unless some else out there thinks otherwise. Thank you for your comment.
Regards,
Scott

TS2755 I received a message from my wife, to which I replied but the response went to her and others in her contact list. How is this possible?

I received a message from my wife, to which I replied but the response went to her and others in her contact list. How is this possible?

I have had a similar but worse issue. I sent a text with photo to 6 friends and family members. Their replies went to folks in my contacts list who were not even part of the original string. In fact, one of the replies went to someone whom I had evidently called once but was not in my contact list. This is very strange.

I have a message in my draft folder which causes mail to quit. I cannot delete it?

I have a message in my draft folder which shuts down the mail program. I am unable to delete it.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Many sites have error message "message from webpage" {object error} which freezes system and cont/alt/del is only solution..HELP?

Similar Messages

Maybe you are looking for