Map a drive using windows 7

Trying to figure out how to get my Windows 7 PC to map a drive to my new time capsule. It's not magically finding the disk. Any suggestions?

Did you load bonjour for windows?
Are you using SMB compatible names on the TC.. for everything.. including hard disk.. short, no spaces, pure alphanumeric.
Set the correct workgroup name?
Turn on the guest account to read and write access??

Similar Messages

Location is not available to mapped network drive in Windows 8 using Synology NAS

Original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
"E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
location still can't be found, it might have been moved or deleted."
However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
or an "Added Network Location" the apps install just fine with no problems.
3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
Location" or an "Added Network Location" the default download dir works fine even after reboot.
While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
More info:
I currently have UAC set to "Never Notify".
I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
the problem, here:
http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
Any help resolving this is greatly appreciated.

Hi,
Based on your description, we can temporarily disable the firewall to see whether the issue persists.
For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
can be fixed.
Best regards,
Frank Shen

Map Network drive in Windows 8.1

Hi Guys,
I was suffering a weird problem about mapping network drive in Windows 8.1.
I ran the command "net use ...." to map a network drive and the command was running successfully. Then I used the "net use" command to check the status for the network drive mapped before, it showed good. But when I opened "my computer",
I couldn't see the network drive mapped before in the explorer.

Hi,
After you created the mapped network drive with "net use", are you able to find the mapped driver letter information in the registry HKCU\Network?
Please also try to map the network drive via GUI tool under Explorer "Map network drive" option, check the result.
for net use command, please make sure that you've set the correct parameters
https://technet.microsoft.com/en-us/library/gg651155.aspx
Yolanda Zhu
TechNet Community Support

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

Trouble synching mapped network drive in Windows 8

Hello
I have recently bought a Sony Vaio Pro13 with Windows 8. I have also just upgraded to Windows 8.1. I have another laptop running windows 7 to which I have mapped the network drive at my place of work. On the W7 computer, files are available offline and I can
synchronize them without any problem using the VPN.
I mapped the network drive to my new laptop running windows 8 but only about half of the offline files were made available offline and it was not possible to synchronize. I then started again, by deleting the mapped drive, deleting the offline files in the
CSC folder, moved the folder elsewhere and increased the space available for offline files. I then successfully mapped the drive and copies of all offline files were available on the laptop (after about 2 hours of synchronizing!).
However, I have not been able to synchronize the files since. The VPN works for other things (e.g. subscription websites which need a VPN connection) but the network drive is showing as either offline, or when I try to synchronize, the process begins and then
I get a 'failed' message (currently 'the username or password is incorrect'). This can't be the case, or I wouldn't be on the VPN or accessing emails via Outlook - and in any case, it worked once with exactly the same credentials. I double checked in the windows
credentials as well. The sync centre also says that the drive is 'offline (background sync)'.
My IT administrators do not have any suggestions apart from removing 8 and installing 7 because they do not currently support Windows 8...
Do you have any suggestions as to why the VPN works, the files have been made available offline, but the networked drive will now not sync?
Thank you
Liz

Hi,
It appeared to be network issue, please try to update you NIC driver and then change power option of network adapter:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
After these steps, turn off Firewall and please restart computer and check the issue again.
If it doesn’t work, please upload the screenshot of error message and event log here for further research.
Hope these could be helpful.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Map a drive from Windows 2000 to Solaris directory

Solaris is new to me. So, please forgive me if I do not have technical terms correct. We recently installed Solaris (SunOS 5.7). Is there a way to map a drive to a Solaris directory from a Windows 2000 workstation? I tried to do a NET USE j: \\123.123.123.123\home /user:root *, and I receive the following error:
System error 67 has occurred.
The network name cannot be found.
Is there something I need to do on the server to make this work? I was reading about the share command in Solaris. Is this what I need?
Thanks in advance!
Tim

You will need to install Samba on your UNIX box or install Microsoft Windows Services for UNIX...
Samba is probably easiest...both are free...

Cannot open document on a mapped Samba drive in windows XP

The latest version of Reader will not allow me to open a PDF on my network drive. What a pain! I'm running Windows XP Professional and I map a Samba drive that's on my Redhat server. This is my primary drive where all my documents are created and stored. When every I try to open a PDF document from this drive, reader refuses. It opens fine if I copy it to my local harddrive or access it using another product.
Man, I hope they fix this quick. What a pain! Anyone with a work around, please let me know.

Announcement: Would you like to help us improve Adobe Reader?
Hi All,
We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available at https://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
We look forward to your active participation, feedback and help towards making Reader a better product.
Thanks and regards,
Adobe Prerelease Team

Format external drive using windows pc

This ought to be simple (I think), but it is turning out not to be. I have an early 2008 MacPro, on which I have bought and installed Mac OS Lion. Unfortunately, when converting to iCloud, something happened and now the computer won't boot up at all. I have located the Apple support article about Lion recovery by creating an external storage device to which I can re-download Lion and then reboot the Mac using an external stoarge device -- in my case an external hard drive on which I have succeeded in setting up a 16GB partition (only 13GB required, per the article) using my Windows 7 PC. It all seemed pretty straightforward until I got to the point where I needed to set the partition scheme to GUID Partition Table and format the partition to MAC OS Extended (Journaled). I can't believe there isn't something I can locate easily which will permit me to accomplish the foregoing and proceed with recovering my system on my Mac. Instead, everything solution I have located online so far provides for this process to be done using Disk Utilities on a Mac -- but I can't. I only have the PC working right now. Does anyone know how I can get the partition formatted and proceed as directed in Apple's support article?

You cannot on a PC because it does not have disk formatters that can set up a disk partition for a Mac unless you use third-party software like MediaFour's MacDrive. The Apple support article assumes you would do the formatting on a Mac.

Map network drive from windows 98 to server 2008 R2

Guys I have some old Windows 98 systems these 98 systems are attached to pieces of equipment on the warehouse floor. So with that said there is no way to upgrade them. I would like to map a network drive from these 98 systems to a 2008 R2 file server.
I have played around with LM compatibility mode but I'm not having much luck. Still when I try to access a share on a 2008 R2 box I'm being asked to entire a password. On the old 2003 server all I had to do was create a local account with the same username
and password on the 2003 server. So if anyone's done this I would be curious in knowing more. BTW the member server I'm trying to connect to is in a domain and the 98 box is in a workgroup.

Hi,
As Windows 98 is such an old system, I may make mistake on suggestions I provided so please just have a try.
For old client system like Windows XP, in a workgroup environment we have 2 mentions to share folders.
1. As you said, create local account with same password on each computers so they can access each other with that account.
2. Share folders to Everyone (including Guest) and enable Guest account on computers which going to access.
You can try to enable Guest account and set a same password on each computer as a test.
Also in Windows XP we need to modify "Simple File Sharing" option. I cannot confirm if it exists on Windows 98 system but if it does, enable it when trying suggestion 2 and disable it when trying suggestion 1.
http://support.microsoft.com/kb/304040/en-us
If you have any feedback on our support, please send to [email protected]

After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
== This happened ==
Every time Firefox opened
== today 5/24/10 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

I can't map a network drive from Windows 7, using the exact same settings that work fine with Vista or XP

I have Windows 7 64 bit Home Premium,and I can't map a network drive. I use a Cisco VPN client to connect to my University network, and then when I go to map the drive I get a message that it can't be found. I have done web research it seems that I am unable to edit the local security settings (apparently you can do this in Ultimate and Professional versions), and that this may be the culprit. Does Microsoft make some patch available? My IT people, and the tech help at HP are baffled by this. If Windows 7 Home Premium does not allow for mapping of network drives, then I'm dumping it and returning to Vista. Has anybody had similar problems?

Day 2 of trying to map a drive in Windows 7 Professional:
My journey to ____..
Begins:
I purchased Windows 7 Home 3xuser license pack for ~140 US I kep hearing friend sayhow much faster it was than Vista 32bit so I thought hey let’s “upgrade”
.. I looked up the definition of the word “upgrade” the following is what I found:
1.
To exchange a possession for one of greater value or quality; trade up.
2.
Computer Science
To replace software or hardware with an upgrade.
3.
Computer Science
a.
To replace (a software program) with a more recently released, enhanced version.
b.
To replace (a hardware device) with one that provides better performance.
So we,re all clear on what an upgrade is suppose to be. I wanted tomake sure I understood before I proceeded.
I installed a copy on my latptop Toshiba Centrino 1.83 Ghz/3 G Ram decent computer for all intent and purposes. It’s been working fine
on Vista but running slow. So I went through MS “requirements checking” to determine if my computer passed the MS test and worth of such the honor and also get MS’s blessing before I moved forward with the “upgrade”.
I proceeded with the upgrade went relatively smoothly had to uninstall a few programs but I figure that’s such a
small price to pay for such great enhancement that I will receive from my “upgrade”. Approximately 4 to 5 hours later after minimal reboots I was all set to go with my new upgraded OS. It was working as prescribed faster than Vista cleaner
interface sorta, helpful little taskbar gadgets. I was stoked that night I went to be thinking I will go to work and be a rock star on my brand newly “upgraded” computer.
Oh and by the way, I was so thrilled about Windows 7 I even upgrade my home computer as well.
I go into work and I have a very big user migration that night, I am an network engineer and I use my laptop for work I use Visio, Wireshark
and others, all the tools that help us do our job efficiently and effectively.
I sit down turn on my computer it boots faster than Vista and I’m just chomping at the bit to get going have lots of work to do. So let
go back for a minute an look at the definition of “upgrade”
“3.
Computer Science
a.
To replace (a software program) with a more recently released,
enhanced version.
b.
To replace (a hardware device) with one that provides
better performance.”
So were good on what upgrade is?
I have my computer up I have logged in (locally) not on a domain as I was not when I was on Vista OS. I wanted to attach the server to get some
files so I go to map a drive………………. Hmmmph ….. that’s weird I cannot map a drive …… let’s try this again……… hmmmph…. what this domain thing going here I
never need that before in the lesser product Vista but ok I’ll add my
\\servername\folder and my domain.org\username..... hit enter and hmmmmmph …. It ask me for my password again.. well I could have fat gingered it so I’ll type it in reallllllllly slow.. hmmmmmmph ….. again no such luck…
So I decide consult a colleague of mine who recommended I “upgrade” to Windows 7. After speaking with me he tells me oh! You need
Windows 7 Professional to do the same things you did in Vista home … I’m perplexed by this but let’s once more take a look at the word “upgrade” to “enhance
and/or make better
”. So now I’m a little perturbed by this little bit of information but I suck it up and decide I’ll drop another ~100.00 US on an “upgrade” to Professional small price to pay for such a great product.. I mean have
you seen those commercial WOW!
I make my purchase download and once “upgrade” to new “upgrade” with even more improvement over Vista and XP I mean
with those two OS’s it took me all of 5 second to map a drive SURELY Windows 7 Professional will map a drive like no one business.
After
few reboots my computer has been fully “upgraded” and ‘upgrade” again to W7 Pro and I’m off to the races ready to get to work cause my migration will be starting in a few hours and I want to be prepared. Sytsem reboots quickly
I’m logged and ready to start getting my information I so desperately need. I go to map my drive I figure I’ll help W7Pro out I’ll be proactive and use “domain.org\username” that way W7Pro
will like me and think oh! this man is brilliant. I hit enter with my correct password that I type realllllly slow. …… waited it’s thinking for sure this is it .. the anticipation is killing me the excitement is overwhelming …….
THUD my world just came crashing down ..no luck .. no login ..no mapping drives…I’m now on hour 6 of this ridiculous journey to the “upgrade” to “upgrade” ____. So now I’m left to forum because MS surely does not
think I am going to pay them $275.00 and hour for support on something that should have work right out of the box.
So I’m on day to I have tried everything on this forum page to get my mapped drive to work with nothing working for me. It appears that
if I want to use my computer I will have to rolled back to the lesser (Vista).
Just in case you’re wondering how I made it through the user migration. I had my co-worker bring me my XP computer worked like it’s
was suppose to.

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

HT1766 How can I change the location of my iPad backup to an external hard drive (I'm using Windows XP)?

Hi Everyone,
My computer's hard drive isn't very big and it's getting quite full backing up my iPhone and iPad. I would like to transfer the back ups to an external hard drive but I haven't figured out how to do this. Also, I would also like to move the Apps folder to the external hard drive.
Although I hope to eventually purchase an Apple computer, for now I still have a PC running Windows XP. Does anyone know how to transfer these files to an external hard drive using Windows XP?
My iPad is the newest with retina display, 128 GB Wi-fi.
Many thanks!

Relocate iOS device backups
Assuming you're running Windows Vista or later you can use the following steps:
Open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
If you're still running Windows XP you can use Junction (cmd line tool) or NTFSLink (shell ext). In both cases you move the existing folder to a new location, create an empty folder where the old one used to be, then use the tools to get the operating system to link the two together and silently redirect any file operation on the old location through to the new one.
Note that while this method works for iOS device backups it cannot be used to redirect sections of the media library.
tt2

Airport Extreme with External Hard Drive on Windows 7

I just purchased an Airport Extreme in order to connect my collection of old hard drives so I can share the files with my Windows computer and Apple TV.
My main problem is accessing a single hard drive (exFAT, one partition -- couldn't format into FAT32) from my Windows 7 laptop. The Airport connects wirelessly to my Fios router with no problem.
Using the Airport Utility > Disks I can see the hard drive (although it only shows its physical name "SAMSUNG HM302JI" not the name I gave it when I formatted it, "Storage300GB"), however it doesn't show any files on the drive (and there are a few test files of all types: jpg, xlsx, a sub-folder, etc.). I can't see the drive via My Computer nor can I map the drive using the IP address (192.168.1.13). When I tried adding a USB hub (for adding the other hard drives once I get this one working) I see the same problem, just the name of the device but no folders.
Norton 360 can see the device, but Windows cannot. I've tried turning off Norton, but that hasn't helped.
I have searched the web and support communities high and low, and I have yet to find any help.
Any help would be appreciated!!

My main problem is accessing a single hard drive (exFAT, one partition -- couldn't format into FAT32) from my Windows 7 laptop. The Airport connects wirelessly to my Fios router with no problem.
The real main problem is that the USB port on the AirPort Extreme will not support exFAT or NTFS.
It will support HFS+ and FAT16/32.
Please see this Apple support document to confirm:
http://support.apple.com/kb/HT2426

Index a NAS shared folder using windows server 2008?

I have NAS server stores all my files, and I have windows server 2008 which is running an app (File Finder), So I am trying to index NAS shared folder.
How can I index nas shared folder using WS2008? or is there anyway to index NAS shared folder ?

Hello,
please do not multi post the same question Already given an answer in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/91ca966c-aacc-4db1-8e3f-3cc8f03f7425/how-can-i-index-mapped-network-drive-on-windows-server-20082012?forum=winservergen#86db6f15-fdc6-4dc1-ab51-19c58ad054c8
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Map a drive using windows 7

Similar Messages

Maybe you are looking for