Map a field more than once in import manager

Hi experts,
is it possible to map a source field to more than one destination fields in import manager? E.g. I have a source field "client" and I have to map it to a destination field "client" and also to a combined lookup field which consists of a field "client" and "systemname".
Thanks for your answers. Regards, bd

Hi,
Yes you can achieve this , During Import Manager when mapping source field to target field in Map Field/Values tab, just above this on left hand side you can see Source Hierarchy in MDM Import Manger, Right click on field which you want to map more than one Destination field, here you get Clone Field option which make clone field , so you can map this clone field to other second destination field which will serve your purpose.
Hope it will Help you,
Rewards if Useful.....
Mandeep Saini

Similar Messages

How to use an available field more than once to define an unique field?

At the table level in the console you can indicate various combinations of fields that must be unique either individually or in combination. However, you can assign an available field only once, individually or in combination. For our data model it is a functional requirement that any available field can be used in more than one combination to define an unique combination.
Example separate unique combinations:
combination of: postal code + house number
combination of: city + street + house number
We use "house number" twice.
Is it possible to do this in MDM and how?
Thanks in advance for your answer,
Heleen

Hi Heleen,
If you want to use Source field twice then you an option called Clone Field in MDM Import Manager.
Follow these steps:
Step1. In Import manager select the source table.
Step2. Right click on the required field and Select Clone Field house number in your case.
Please revert if any queries.
Thanks and regards,
Sagar Sonje.
Mark Helpful Answers

3.4.5: Getting location map to work more than once, workaround?

Hi. 3.4.5 on 10.8.5. I am currently closing Aperture and re-opening each time I create a new Location to assign to a Project (via the Project information dialog) because Aperture seems to be able to create new Locations only once per session. Any suggestions? I have 52 Projects from a recent trip. By no means unworkable, but offends my fruit-gardener's sense of propriety. Thx.
Message was edited by: Kirby Krieger - clarity (maybe).

You are welcome, Kirby.
"Still buggy" --
One thing I forgot to mention: Upgrading to 3.5.1 does not seem to help in this case. I am seeing this problem still in 3.5.1. when working from "Projects" view.
But I noticed a difference between projects that already include at least one image with a location assigned and that will show "Edit Location" in the Info panel and projects without any known locations showing an "Assign Location" button. For projects with "Edit location" I can get the the location circle with resize arrows back by searching for a place name in the "Edit Location" panel and picking one of the places further down the list in the "additional Results" section. So if your Info panel in Projects view is showing "Assign Location", you could try to make a two-step assignment: First assign any place by whatever you can get from the "Assign location" panel, and then use the "Edit location" button to fine-tune the place. This might still be quicker than restarting Aperture.
It would be good, if someone using 3.5.1 could also check please, if this buggy behaviour is still be there for them.

Queryeditor using fields more than once in where clause not possible?

I have to create a select query with a WHERE clause using a field multiple times.
I can't get this to work. For example:
SELECT ALL
EMSDTALIB.EMSPPA.PAIDNR,
EMSDTALIB.EMSPPA.PANAAM,
EMSDTALIB.EMSPPA.PAVLTR,
EMSDTALIB.EMSPPA.PATITL,
EMSDTALIB.EMSPPA.PAADRS,
EMSDTALIB.EMSPPA.PAHSNR,
EMSDTALIB.EMSPPA.PAHSNT,
EMSDTALIB.EMSPPA.PAPCA1
FROM EMSDTALIB.EMSPPA
WHERE EMSDTALIB.EMSPPA.PABEDR=1 AND EMSDTALIB.EMSPPA.PADTUD=0 AND
(EMSDTALIB.EMSPPA.PADVBD='001' OR EMSDTALIB.EMSPPA.PADVBD='003' OR EMSDTALIB.EMSPPA.PADVBD='006')How do I get this to work?
Regards,
Roland

Hi Roland, Luca, ICON_SS,
I just tried similar queries using the latest release bits and it works fine.
My Queries that worked fine are :
SELECT ALL DASUSR1.PERSON.PERSONID, DASUSR1.PERSON.NAME, DASUSR1.PERSON.JOBTITLE, DASUSR1.PERSON.FREQUENTFLYER
FROM DASUSR1.PERSON
WHERE ( DASUSR1.PERSON.NAME='Able, Tony' OR NAME='Black, John' )
SELECT ALL DASUSR1.PERSON.PERSONID, DASUSR1.PERSON.NAME, DASUSR1.PERSON.JOBTITLE, DASUSR1.PERSON.FREQUENTFLYER
FROM DASUSR1.PERSON
WHERE ( DASUSR1.PERSON.PERSONID=1 OR PERSONID=2 OR PERSONID=3)
I would suggest you to Download & Install latest Creator bits released 9/27/2004, if not already done.
Appreciate your valuable feedback,
Sakthi

How to display the same field more than once in report with diff. filters

Hello,
I have an RTF template I built out. There is a 1:M relationship of an opportunity:deal point.
I want the user to be able to pass the opportunity and then see a report including all the deal points.
The report looks something like this:
Date: DP100
Terms: DP200
Duration: DP300
and so on. to simplify things, the date will always be DP100, terms will lways be DP200, etc.
Where do I set these filters? When using the query builder on the BI Publisher server i don't see anywhere to filter.

Here is a copied piece of the RTF template illustrating what I'm trying to do in the word template builder.
Tenant (Signing Entity): <Deal_Point_Value where Deal_point_name = 'DP231'>
Tradename (D/B/A): <Deal_Point_Value where Deal_point_name = 'DP240'>
State of Incorporation: <Deal_Point_Value where Deal_point_name = 'DP1330'>
Landlord: <Deal_Point_Value where Deal_point_name = 'DP1560'>
Premises: <Deal_Point_Value where Deal_point_name = 'DP144>
Storage Space: <Deal_Point_Value where Deal_point_name = 'DP235'>
Off Premises Equipment: <Deal_Point_Value where Deal_point_name = 'DP386'>
Term: <Deal_Point_Value where Deal_point_name = 'DP940'>
Options: <Deal_Point_Value where Deal_point_name = 'DP1200'>
Rent Commencement: <Deal_Point_Value where Deal_point_name = '1136'>
Estimated Delivery Date: <Deal_Point_Value where Deal_point_name = 'DP123'>

Use of same filed more than once in module pool program.

hi Good day,
i want to use a filed on the screen more than once.
ex : T7EHS00_EXA_PHY-UNIT
the reason why i want to use this field more than once is b'coz it has SEARCH HELP.
If i use this filed search help is created internally.
to be more specific :
i have
screen field    screen field
xys                unit of meas.
abc                unit of meas.
def                 unit of meas
ghi                 unit of meas.
jkl                  unit of meas.
but SAP Does not accept the same field more than once.
in this case what can i do?
thank you,
J.

Hi Jacob,
use like this....
data : i1 type T7EHS00_EXA_PHY-UNIT ,
        i2 type T7EHS00_EXA_PHY-UNIT,
        i3 type T7EHS00_EXA_PHY-UNIT,
        i4 type T7EHS00_EXA_PHY-UNIT.
In the screen properties,
Give search Help-----> H_T006
Declare the name in program as given to IO filed name...
Hope you Understood...
Regards,
Vijay SR

Importing an email more than once from notes into the webclient...Possible?

Hi!
Is it possible to import an email more than once from a lotus notes account into my webclient?
I don't have a working sample so:
Is there a lock to prevent it... in notes... in my webclient?
Are there optical signs in my webclient that an email is already imported?
Thanks in advance for your hints in this case.
Cheers, Ingo

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

LSMW error: Field name '' used more than once in file"

Hi,
I am doing a sample vendor master load with LSMW but while reading data I am getting an error
"Field name '' used more than once in file
'C:\Users\sdurgia\Desktop\LSMW\MM\vendor_master_te
s'."
Not getting proper reason.Can you please guide?
Urgent please help.
BR
Sumeet

Hi,
FYI.
LIFNR
BUKRS
EKORG
KTOKK
NAME1
NAME2
SORT1
SORT2
STREET
HOUSE_NUM1
STR_SUPPL1
STR_SUPPL2
CITY2
CITY1
REGION
POST_CODE1
LAND1
TAXJURCODE
PFACH
PSTL2
REMARK
TEL_NUMBER
TEL_EXTENS
MOB_NUMBER
FAX_NUMBER
FAX_EXTENS
SMTP_ADDR
DEFLT_COMM
KUNNR
VBUND
KONZS
BEGRU
STCD1
STCD2
STCD3
STCD4
SCACD
SFRGR
DLGRP
BANKS
BANKL
BANKN
KOINH
BKONT
LNRZA
XZEMP
AKONT
ZUAWA
FDGRV
BEGRU1
QSSKZ
QSZNR
QSZDT
ALKTN
ZTERM
TOGRU
REPRF
KULTG
ZWELS
ZAHLS
LNRZB
HBKID
TOGRR
EIKTO
WAERS
ZTERM1
INCO1
INCO2
EIKTO1
WEBRE
XERSY
XERSR
VSBED
NAMEK
J_1IPANO
QLAND
LFBW-QSREC
XVERR
FYTYP
STCDT
BKREF
4000048674
2550
M004
DHL EXPRESS (USA) INC
PAY
4000069273
PO BOX 4723
HOUSTON
TX
US
77210-4723
CONTAC: IRMA MURILLO
800-225-5345
281-874-0678
[email protected]
94-3380425
US
11000536
999999
ACCOUNT HOLDER
221300
1
AP VEND
Z011
X
T
B
USD
Z011

Members from same dim appearing more than once in a record

I have a dimension, "Day of the Week", with each day of the week as a member. My source data has a field for each day of the week. If the flight ( this is an airline flight database ) operates on that day of the week, there is a value, otherwise, its null. Is there a way to load this as is, or will I have to have a record for each day of the week that the flight operates? The Admin guide states "No member from the same dimension can appear more than once in a record", which I think answers my question, but I wanted to throw it out there to see if anyone else has a solution.thanks

So, the days of the week are columns in your data source? That is no problem for a load rule. Normally you tag a column with the dimension it maps to in the cube. In this situation, when you reach the first week, you tag the column with the MEMBER in the day of the week dimension that it maps to.If this doesn't make sense, perhaps you could post the field layout of your file and myself (or someone else) could tell you how to map the columns in the load rule.Regards,Jade--------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Prepared statement st in servlet - not executing more than once!

Hi,
my problem is that the following piece of code in a servlet does not get executed more than once:
myQuery = "DELETE FROM MREMINDERS WHERE username=? AND reminders=?";
PreparedStatement st = conn.prepareStatement(myQuery);
st.setString(1,usern);
st.setString(2,oldRem);
st.executeUpdate();
st.close();
The above code is called in a servlet to delete fields from a table. I call this code in a for loop from another method in the servlet. It executes the first time in the loop, but the second time onwards it throws an error!!! please let me know how to solve this ASAP since i am at the point of frustration now!!!
thanx...

Hi,
sorry... i got it fixed!!!! :-)
i was closing a JDBC connection which was generating that error!!
thanx again..

Report to select customer ID occuring more than once

My report requirement is to capture transaction detail when a customer ID occurs more than once. Is there a way to do a sum count on the customer id in order to display the transaction detail. My current solution is to run a report where the customer count is greater than one, and then do a subquery against that data to display the transaction detail. I would like to be able to eliminate the subquery.

Hi,
You can create an analytic function to count the customer_ID per every transaction:
count(customer_id) over (partition by ..<enter the fields of the report>.....)
This will give for every transaction the number of transaction per same customer_id
Now that you have it you can create a condition on it so
that you will get only transaction with count customer_id > 1

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

Error: An attribute cannot appear more than once in the same start tag

Hi Everyone,
when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
"Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
And i delete the particular file from the path and run the page so this time it works fine.
But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
What can be the permanent solution for this issue?
Plz let me know any suggetions.
Thanks.

Seems like the mdl file is corrupted or was not generated correctly.
Can you try to create the mdl file again and then try the import ?
If it doesn't work then try contacting Oracle Support.

Map a field more than once in import manager

Similar Messages

Maybe you are looking for