Map a (street) address from the Web?

I must be missing something. Is there no way (other than remembering it) to map an address you find on the web?
On the desktop, the Google Toolbar does this nicely...one of the things Google got with Maps when they acquired it. Surely Steve could hit Eric up for one more bit of technology, no?
Since there's no way to select text, much less a clipboard, these really need to be made into links by Safari.

There are several ways.
The easiest way: If you have your address book set up, tap on an address in your address book. This should bring up a map with a red pin.
Click on the red pin and you get more options. Like you can make it a bookmark within Google Maps so it is easy to get driving directions to or from.
Also, when in maps, you can type Address, State, Zip in the box at the top and it will bring up a map (which you can then bookmark, place in your address book, etc.)

Similar Messages

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How to Export full street address of the contacts from AD OU

How to Export full street address of the contacts from AD OU

Break down the one liner suggested by Chen . What do you see when you run the below :
Get-ADUser -Searchbase 'OU=XYZ,DC=XYZ,DC=XYZ' -Filter * -Properties *
You will have to replace the OU path in the above.
Once you see the Users are an output of the above, try below :
Get-ADUser -Searchbase 'OU=XYZ,DC=XYZ,DC=XYZ' -Filter * -Properties * |
Select SamaccountName, @{n="Full Address";E={[String]::Join(';',$_.StreetAddress , $_.l, $_.PostalCode, $_.Country)}}
If you are able to see the objects till this point then only you will get those in your CSV. These are nothing but basic steps to follow when someone gives you a solution.
Hope this helps.
Knowledge is Power{Shell}
DexterPOSH
My Blog

How do I access my AE attached lacie drive from the web

I just hooked up a 1TB drive to my new AE and think I have it configured properly in the disk pane of airport utility. I'm very much hoping that I have it configured correctly! I chose to configure "with a disk password", and not " accounts", and just for the heck of it clicked on the "?" [airport utility help] at the bottom of the Disks/File Sharing page. At the bottom of the page in help under "sharing a usb hard disk on your network", under " to set up disk sharing:" #4 "select the " share disks over ethernet WAN port" checkbox if you want to provide remote access to the disk over the wan port", It turns out that I don't have that message on my airport utility pane for Disk/ file sharing. I do have a checkbox that says " share disks over the internet using Bonjour, but I definitely don't have a checkbox that says " ethernet wan port" as a choice.
Why would my pane be missing that choice? I recall setting up the AE choosing to be able to use computers with the pre 802.11n compatability. Should I have chosen the 5ghz which is 802.11n only as I recall.
I hope this all isn't sounding to complicated. I just want to be able to access my hard drive [connected to the AE] remotely from the web and hopefully be able to access a huge music library that i have on that drive. HELP, PLEASE, KIND APPLE PEOPLE!

It is attached to another router.
In order to access a drive from the Internet, you need to know the Public IP address of the router and the router would need to be configured to port map the file service requests from the Internet to the drive. Apple provides Leopard and Snow Leopard users a means to access drives attached to an 802.11n AirPort Extreme Base Station (AEBSn), from the Internet, by using a feature known as "Back to My Mac." You may want to explore this option further.
Without Back to My Mac, the router would need to be manually configured to make this work. In a much simpler case where the 802.11 AirPort Extreme Base Station (AEBSn) is directly connected to the Internet modem, you would use the AirPort Utility to determine its Public IP address and to configure it for port mapping. The only difficult issue is the type of Public IP address that your ISP provides you. Most consumer-grade Internet service comes with a dynamic IP address. That means this address will change periodically and you will need to keep track of the changes in order to be successful in accessing it from the Internet. One way to do this is to use a DDNS service, like DynDNS.
In your case, there is an added level of complexity since the AEBSn is downstream of another router. You would have to configure both this router and the AEBSn to get this to work.
Should I try to set up with accounts, would that be different in regards to this problem?
The 802.11n AirPort Extreme Base Station (AEBSn) can share out a hard drive with three types of access: 1) Base Station Password, 2) Disk Password, or 3) With Accounts. Which type you choose will not affect the drive from being accessed from the Internet.

How can I copy an email address from the form results while online?

Our form contains a field where the users submitted their email address. But I am not able to mouse over this data in the "View Responses" tab, and copy the email address by selecting the email address and Ctrl C, and neither can I right-click this data field and copy it.
Our organization just switched to Microsoft Office 365, and "mailto" links on web pages can no longer be clicked to launch a native desktop email client program. So the users tasked with responding to forms submitted via Formscentral now have a much harder workflow. They are compelled to download the data as a spreadsheet, just to be able to cut and paste an email address into their reply email.
I suggest and request that the Flash-based "View Responses" tab be modified to allow email addresses to be selectable and able to be copied to the "clip board". This would allow users who can't execute a clickable mailto link to copy and paste the email address from Formscentral into a new email. Many organizations like mine are moving away from native client-based email programs like Outlook to save money, in favor of cloud based SAS web-based email like Office 365.
Is there some other way to enable mailto links where no client email program is installed on the users PC?
Thanks,
-Dave Bartholomew

While I am still looking for a better answer, I've discovered a way to cut and paste email addresses from the FormsCentral "View Responses" dashboard. I wrote up the instructions to help our users and thought I'd share them in this forum as well.
But it would be nice if there was a simpler solution... Can anyone offer a better way?
-Dave B
) Right-click on the email address
) Select “Filter by: …” Doing this will change the view to show only entries that were sent from the selected email address.
) And it will display the Filter in the header of the form.
) Left-click on the email address displayed in the filtered results, in the header of the form.
) A new sub-form will appear, and the email address can be cut and pasted from this new sub-form. Highlight the email address and hit “Ctrl C”, or right-click and select copy.
) Now you can paste the email address into a new email in Office 365. (Ctrl V) or right-click and select “Paste”
) Click the “Clear” button and then “OK” to exit the filtered view of the data.

Firing a servlet from the web..

I am using Win2000 IIS5 and ServletExec. I have configured the server so I can fire up a 'HelloWorld' servlet from the local machine but when I call the servlet from the web i.e. http://www.???.com/servlet/HelloWorld it does not fire. I have configured the virtual server for the web site address.
any ideas greatly appreciated.
Nigel

HelloWorld is the servlet class so no extension. I've tried various ways of firing including referencing the servlet in a html page but always the same result of being able to fire the servlet if I include the server name i.e. http://websrv1/servlet/HelloWorld but not if I use http://www.mysite.com/servlet/HelloWorld.
Nigel

Fetching Dynamic email address from the HTML content sent in the email body

Hi All,
I have a scenario where in i have to send an html content via an email body . while doing so , i need to fetch the email address from the html content and send a mail to the specified email adrress in the html content .
How to fetch the email address from the html content.
Regards
Vinay P.

Hi ,
Dynamic configuration means ...do i need to come up with a mapping which contains the To,From,Subject fields & all...so that when i click on the mail package in mail adapter ...this "To" email id will be fetched dynamically
Regards
Vinay P

Connect a tablet as input method or push asynchronously data from the WebAs

If have to connect a tablet to a WebDynpro application. Not a tablet PC or something, just an ordinary tablet. This is one of those big plates with hundreds of imaginary buttons.
The user pushes with a pen some imaginary buttons on the tablet and the WebDynpro program should act accordingly. E.g. the user pushes in the oder entry WebDynpro the button "TheMP3Player" and directly after that the button "colour green", then pushes two time the "battery pack" button and then "type enhanced capacity". The WebDnypro component should react accordingly. Should jump between field, etc.
Do we have the possibility to add an input device like this to the WebDynpro application or are we stuck with mouse an keyboard? At least, I could not find a way to do this in WebDynpro.
If I would use an ordinary, classical Dynpro, I would write and RFC server, write the data from the tablet to the WebAs and from there write the data directly to the Dynpro.
Since WebDynpro is more or less stateless, we can do this here, right? Or is there some "add on" that I could use to poll on a regular or on an event basis (an event not triggered by mouse or keyboard though) data from the WebAs?
Any help would be appreciated.
Thank you!
Kind regards,
Andreas

Hi Maaniks,
I'm a little puzzled by step 5. The return from the tpcall() will be TypedBuffer, so you shouldn't need to create another TypedBuffer. You may need to downcast it to the particular type of TypedBuffer returned, but you shouldn't need to create a new TypedBuffer or TypedFML32.
Otherwise what you are doing is probably pretty reasonable and common. I'm not aware of any general purposes classes that do what you are looking for, although creating one probably wouldn't be hard. Using reflection you could make it such that the same converter class could handle any POJO or Bean, assuming you can easily map the field IDs to attributes or properties of the POJO or Bean.
The only comment I might have is whether you use an iterator or look for specific fields is largely going to depend on which there are fewer of. If the class you are populating only takes a few fields from the FML32 buffer, you might just extract those fields instead of iterating through the entire FML32 buffer.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

How to Run scenario from the web using HTTP web page?

Hi guys
Please let me know How to Run scenario from the web using HTTP web page?
Regards
Janakiram

Hi Janakiram,
ODI provides web based UI for running the scenarios using Metadata Navigator (read only of ur ODI components) and Lighweight designer (u can edit the mapping here).
Please explore how to install metadata navigator in ODI and have a look at ODI Setup document for more information.
Thanks,
Guru

How to download pictures from the web with their URLs?

How do you download pictures from the Web so that they automatically have their URL addresses in their "Comments" section of the Get Info window? I thought Safari did this automatically, but it's not happening for me.

Graham--
When you say to open the image in another window, do you mean another Safari window? When I do and right click on the image, I don't get the "Inspect Element" option. I have tried your other suggestion, and that doesn't work either.
So.... I'm still puzzled...
I am also working in the same version of Safari (4.0.4) but this may be because I have the "Develop" menu (between Bookmarks and Window). If you do not, that will not be available to you. I can tell you how to get this, but as a newer user, this may be (for now) more information than you want.
However, if you do open that image in a new window, the toolbar will display the URL of the image.
As to the other solution, I may not have explained this clearly enough. Let me suggest another route to the same idea. With an image in a web page, drag it to the desktop. When it is on the desktop, highlight the image (click once) and then use the Finder > File menu and the item, Get Info. The large panel that opens will give the URL and this works for any file downloaded from the internet, which makes it a useful security check too.
All the best.

Downloading .mp3s from the Web

Hi all,
I've just encountered a slight problem on my BlackBerry 9800 Torch when downloading .mp3 files from the web.
What I often do is send the files to my Gmail address from my computer as attached files, then login to Gmail from my BB and download them onto my device there.
Thing is, it doesn't always work : some files go to the music section (which is where I expect and intend them to appear) but some mysteriously disappear, don't know where to look to find them.
Has anyone ever encountered this problem before? If so, any help would be greatly appreciated !
Thanks
EDIT : I ended up finding them when I connected my device to my computer. Doesn't expalin where they went on the phone but at least I found them !

It's Safari 4 not Quicktime that causes this... Safari 4 doesn't support downloading non-embedded media. Safari now supports html 5 might be the reason why. Media in html 5 isn't handle by plugins. Use Firefox instead.

Why can my 8500 A Plus not download forms from the web?

Why can my 8500 A Plus not download forms from the web?

Hey indianadave,
Are you're apps working from the front panel of the printer? You will want to make sure that you have internet connection to your printer. If you don't, you can follow these steps:
1. Find your printer's IP address.
2. Enter the IP address in the address bar of your internet browser.
3. Click the network tab.
4. Click IPv4 under the wireless/wired menu on the left hand side of the printer screen.
5. Set Manual settings.
6. Set a Manual preferred DNS of 8.8.8.8 and alternate DNS of 8.8.4.4.
7. Click apply and try downloading the forms again.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Ost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

i have lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

Hello,
Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
(Such convolution is worthy of Windows® in my estimation)

Map a (street) address from the Web?

Similar Messages

Maybe you are looking for