MAP activate in the BEX/Standard query

Hai,
I want to make map in BEx report of one my query(based on activation of standard business content).
As per rule I have one info object(0SOLD_TO) in QUERY for map.But map is not coming in my report. The geographical type is dynamic geo-characteristics with values attribute.
This is first time I am making map.
I.e I want to make map for any one query.
Any tips??? Thanks in advance.
With Regards,
Jaheer,Yanbu,Saudi arabia.

Hi,
The BEx Map is part of the Business Explorer. It is used for reporting on geo-relevant data.Check the link in below there you can find what you need exactly.
BEx Map
Regards,

Similar Messages

BEX Standard Query

Hi
Initially when i transport the query for the first time from DEV, I need to create a BEX standard request. I created a bex standard request and transported. Now i want to transport few more queries.
So now i need to create an other request in CTO. Here my doubt is do i need to assign the request to the PACKAGE or just create it.
Regards
Annie

Hi,
As u said, when we transport the queries for the first time, we need not create a standard BeX request with truck icon.
Did i get right?
Right, This is most used way.
And also you mean that when we make some changes to the queries that are already transported then we need to have BEX Standarad request. Am i right?
Right.
Now what i have done is..Collect all the queries in the in transoprt connection, clicked on BEX request (truck icon) and created a request. Now after collecting all the queries, i clicked on transoprt icon and saveed all the queries in the request.
Is it the right way or will i get any problems later.
If those queries are getting tranport first time, have you checked whether the Query elements are collected in that request after saving them in in the request.
Here generally we click on truck button and not truck button with BEx label.
With rgds,
Anil Kumar Sharma. P

Max number of entries in the variable input list (F4) of Bex Analyzer Query

Dear BW experts,
When I run the Bex Analyzer query, it pops up the variable input screen.
If I don't know the specific value of the variable, then I can click on the input help (F4) to get a list of available values. There is a max number of entries coming back to the list. For my BW system, it is currently returning 500 values. For other people and SAP Help document, it could be 1000.
My question is: Do you know where we can configure/set this max value? Is it a global setting?
Thanks in advance for your help in this matter.
Kevin-

Murali & Pra,
Thanks for both of your answers. I think the answers that you provided are for BW 7.X version.
It is flexible and exactly the way it should be for each user to customize a specific variable.
I am running BW 3.5 query, and don't see the "Settings" option/button after I got the list of single values back.
Is there a way to set this up for BW 3.5 query Analyzer? My max value is always 500 for all variables. Is there a place for setting this value and save for the next time.
Any help from any BW experts is appreciated.

Unable to create visual composer table view from the Bex Query

Hi
I am trying to create the visual composer lay out from a Bex query. The Bex query contains a set of Key figures and a structure.
These key figure and structure combination is forming a table in the query output. Key figure parameters are coming as rows and Structure parameters are coming as columns.
example query out put:
Total, HPC, FDS excel ICe etc are as Structure elements and coming as columns in query out put and
Invoice value, Gross sale value, Efficient operations etc are as Key figure elements in query and coming as rows in query out put.
But if I map this query to visual composer table view all these are coming as columns as given below.
Total Invoice value , Total Gross sale value, Total Efficient operations, HPC Invoice vale,.........
And if execute the query will giving the out put in single row.
Can anybody help me out to map this in the row column format?
Is it really possible to do in VC?
I am using CE 7.2. The VC model I need to be embedding in BPM.
Please help me to solve this issue. I completely stuck up this issue.
Regards
Sajith P
Edited by: Sajith P on Aug 17, 2010 3:07 PM
Edited by: Sajith P on Aug 17, 2010 3:15 PM

Hi,
Try to use some function module which will convert query data into flat tables. (eg., RS_VC_GET_QUERY_VIEW_DATA_FLAT).
Hope this solves your issue.
Regards,
Vinay

Changing InfoObject Casesensitiveness did not affect the BEx Query

Hi all,
     I have created an InfoObject which is case insensitive. Populated masterdata and used in few cubes. I populated transaction data and also created some queries around the cubes.
Later I got into a situation where I need to change
the "Load small case chars" property of the infoobject.
Now I need both small and caps.
I deleted the master data for the infoobject and also deleted
the transaction data and then reactivated the infoobject
with the property toggled on. repopulated the master data.
     Now When I open the BEx to modify my query, the master data is only showing unique records , ie
even though I had records like A,B,C,F,a,e,d,f the list shows only a,B,C,e,d,f. ie, the capital A and F is missing.
Any idea why this is happening? I checked the SID table for the infoobject, 'A' as well as 'a' is available.
regs
Anoop

Hi,
Activate the master data? I could not find an option to activate the master data for the infoobject seperately. Please clarify. Yes, the master Data check box is turned on the master data tab.
    I guess, may be dropping the whole infoobject and creating it once again with the "Lower case also" option turned on may solve it. I feel, the problem happens when you change the case sensitiveness of the infoobject half way through, ie after using it in a few cubes and reports.
Well, then i will have to undo this object from all my infocubes first before I delete it. That is something that I am trying to avoid.
Has anyone tried changing this attribute of an Infoobject.
A sample scenario is the VBTYP (Document Category) domain values.
regs
Anoop

Where do I find the BEx Query String?

Hi Guys! I'm trying to connect BI with EP.. I've defined the system in EP, and when I'm creating the BI iView, it asks for a BEx parameter for the BI report.. would anyone know where this is found?
Regards,
Glenn

Hi Michael ,
1) As you told me i changed iview version parameter from BI 7.0 to SAP BW 2.x/3.x" and then when i try to preview it asked me user name and password then it worked but the page layout was like without css file.it did not seem me so good.
>Is it asking me username and password because of using user mapping and choosing uidpwdlogon as authentication scheme?If I use logon ticket It will not ask me a username and password? Am I right ?
2) I have a defined system for BW which contains also Was settings in it and system alias like SAP_BW and using this parameter in the properties of the bex iview.When I use test connection was passed test successfully.I am using usermapping not logon tickets and I am trying all these with super_admin role.
3) I created a url iview using query's url when i try to capture or browser it saying to me unable to fetch...url...and getting http #401 error.I think this should be authentication problem.
4) BW and Entrprise Portal run on the same server EP is using port 50000 and WAS is using 8000.
For the time thats all coming to my mind.Could you pleae share with me What you think about this ?
Thanks and Best Regards,
#Bill J.

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Crystal didn't show the BEx query Attributes description changes/Values

We experiencing the BEx query attributes/crystal report issue.
I create a crystal report using BW- BEx query. Bex query displays the attributes values. But in crystal report side it didn;t show up the values as well as description changes.
But If I change the display properties of attributes (different from one attribute to another) the crystal report reflect the values. But crystal report didn't show the Attribute description changes , the one i did it in BEx query side.
Example:
Bex has a Masterdata as well as attribute Field1, Field2 etc.. I changed the description like Field_Test1 and Field_Test2. Also I changed the display property for Field_Test1 is Key and text and long , Field_Test2 is Text & LOng text.
I got the attribute values is crystal report Xi R2. But crystal didn't reflect the description changes?
Suggestions Please?

Post your question to the Business Object Integration Kits forum

How to change the standard query "Create a Master Agreement" by a custom one

Hello Sourcing CLM experts,
I would need to replace the standard query displayed when the user tries to create a Master Agreement by a custom query to filter the MA types according to some criteria:
According to this post: Re: Create security profile for a document template in SAP Sourcing, I've tried to achieve it by doing the following steps:
Create a new query as a copy of exsiting query FCI-ContractTypes
Modify query group FCI-ContractTypesBP to include my custom query instead of the standard one to only list the MAType "Standard Master Agreement"
Following you can see the change done into the query group FCI-ContractTypesBP:
However, standard query has not been replaced and same set of MA Types are listed.
Therefore, I would like to ask you:
Is it possible to do this kind of modifications? If so, which query group need to be modified?
If it is not possible, is there any other way to achieve that requirement?
Thanks in advance for your time and support!
Best regards,
Isaac

Hello again experts,
If this query cannot be modified, is there any option to disable button below? Or at lease, to disable the query group to avoid the listing of MA Types when it is pressed?
The reason is because we are going to set up the system in the way that only it will be possible to create Master Agreements from Template. However, if user keep on using that button he will be able to create MA from document types.
Any ideas?
Thanks again and best regards,
Isaac

How to restrict the Null Values for Key Figules in the Bex Query

Hi Friends,
 I want to restrict the Null values of a perticular key figure in the Bex Query Output.
I will explain in details. i have 3 key figures in my query.. let us assume.. key1 key2key3
key1 key2 key3
4 4 100.00
5 0 200.00
1 0 19.00
0 1 10.00
i don't want to see the the records for which key 2 is 0.
we have a setting in the Bex Query for restricting the Zero values in the query properties. If we enable that setting it will show
4 4 100.00
but i want the report to display..
4 4 100.00
0 1 10.00
can any body guide me. i want to display the values if key2 <> 0.
Regards,
Nagesh.

Hi AVR,
nice to see reply.
can you eloborate your view...how can i put the condition.
i want to put the condition key2 <> 0.
Regards,
Nagesh.

RWI 00200 Error while scheduling the Bex Query based Webi report

Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please advise

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

Problem with the Drill down in the BeX Query Report

Hi Experts,
I have a problem when drilling down the characteristics in the BeX Report. There are nearly 125 fields (characteristics) all in Free Characterictics. After executing the Query, in the report when i am selecting one characteristic for drill down i am getting the values of another characteristic. This is not happening to all 125 fields.
Please let me know where is the problem and give me some suggestion what we can do with this.......

Here is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi ‏96 KB

To bold the descriptions for the structure members in the BEX Query

HI Experts,
Could any one please advise on how to BOLD the descriptions of the structure members in the BEX query.
Thanks in advance,
Jeswanth

Are you looking at making the same BOLD in the web display ..?
To do this :
Execute your query - go to display source for the page and you will see the structure members identified with a particular CSS class.
Open the CSS file from the MIME repository and then identify the class that is used for the structure elements and then change th CSS to make it bold and then upload the changed CSS into MIME .
Refresh the HTTP global cache from SMICM and then run your report again - you should be able to see the structure elements in BOLD.

No map showing in the map app in standard view just arrows,distance and directions on grid okey in hybrid and satellite modes, ios 8 installed just the grid

Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

De-Activating the 'Change Query' option from the Bex Menu

Hi,
I want to deactivate the button 'Change Query' in BEx Excel. I have the restricted the user for not to change the query through PFCG. When the user selects this option, a error message 'You do not auth. for change' is displaying but he can view the query and also the formulas which are written in the query.
I want to avoid the user to see the formula and details in the query.
Can anyone help in deactivating this option from the menu.
Thanks
Ramesh Ganji

hi,
check if helps
Bex Analyzer Toolbar in Excel
Disable or remove "Business Explorer" in the menu bar

MAP activate in the BEX/Standard query

Similar Messages

Maybe you are looking for