MAP change after GR reversal for subcontracting PO

Dear experts,
I am facing problem that the MAP of component changed after GR reversal for subcontracting PO. The posting date of GR is the same date with reversal date, lets say component A in accounting document during GR is $31 when reversing the MAP $19. FYI, I am using batch valuation. Does any body share with me, appreciate any responses.
Best regards,
mahnansa

In accounting document is reflected the component cost was $31 while after reversal (MT 102) the cost in accounting document $19.
Dear you mean to say during GR of subcontractiong accounting document price of that component is $31 and during Reversal of same subcontracting document GR it is showing $19 if my understanding is correct then there might be some other goods movements might have happened in due time which  could have changed the component price as it is a MAP so analyse the same in MB51.
Cheers
KK

Similar Messages

  • Excel layout changed after EHP5 upgrade from EHP4.

    Hi All,
    We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
    This is affected us as we have lot of macros enable for the excel files.
    Request you all to help. Is there any sapnote, anyway we can resolved this issue.
    Thanks

    Hi Markus,
    Thanks for reply.
    I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
    But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
    I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
    New Format Example
    Production plan          
    Description                        Material                               Sales doc.
    IRB 2600 M2004                 3HAC020536-018              104861
    IRB 2600 M2004                 3HAC020536-018              2BT0615486
    OLD Format
    Production plan                    
                                          Description                    Material                               Sales doc.
                                          IRB 2600 M2004            3HAC020536-018               104861
                                          IRB 2600 M2004            3HAC020536-018               2BT0615486
    Hope this above will help to make it clear.
    After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
    Thanks
    Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
    Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

  • Unexpected namespace change after mapping change

    Unexpected namespace change after mapping change
    Posted: Apr 18, 2006 5:17 AM    Reply 
    Hi all
    We developped a mapping about one year ago on XI SP9.
    The source of the message was an Idoc and the target an XML sample (and not a xsd!) of what our customer expected.
    Everything was working fine at that point.
    Here is an extract of the output we had:
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://schemas.xmlsoap.org/soap/envelope/">
    <env:Header xmlns:p="http://localhost/webs/msgDetails.xsd">
    <p:msgDetails xmlns:p="http://localhost/webs/msgDetails.xsd">
    <p:sender>
    <p:senderId>XXX</p:senderId>
    <p:senderName>AUSTRALIA/NEW ZEALAND</p:senderName>
    </p:sender>
    We are now running SP14 and we had to change the mapping. Since we changed it the namespaces defined in the sample XML we use as a target structure are not used anymore, instead they are replaced by ns0, ns1...
    Now the output looks like this:
    <?xml version="1.0" encoding="UTF-8" ?>
    <ns0:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://www.w3.org/2001/XMLSchema-instance" ns1:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://schemas.xmlsoap.org/soap/envelope/">
    <ns0:Header>
    <ns2:msgDetails xmlns:p="http://localhost/webs/msgDetails.xsd" xmlns:ns2="http://localhost/webs/msgDetails.xsd">
    <ns2:sender>
    <ns2:senderId>21873</ns2:senderId>
    <ns2:senderName>XXX</ns2:senderName>
    </ns2:sender>
    Any idea what has happened here?
    Thanks in advance
    Gregory

    Hi Gregory,
    after a short view I would say that the two structures you have posted are logically equivalent.
    I try to make it clear for the sender-element.
    In the first example you have a tag <p:sender>. Obviously the namespace prefix 'p' is used here. In order to find out the qualified name of the element represented by that tag you have to find the namespace declaration for prefix p. As the tag itself does not contain such a declaration you have to go to the parent-tag. Indeed, here you find a declaration for p which says that p is just an alias for 'http://localhost/webs/msgDetails.xsd'. Hence the qualified name for the element is: 'sender' in namespace 'http://localhost/webs/msgDetails.xsd'.
    Now let us look at the corresponding tag <ns2:sender> in the second document. In oder to identify the qualified name of the element you have to find out, which namespace is bound to the namespace prefix ns2 which has been used here. Again you cannot find this in the tag itself but in its parent. Here you find that ns2 is bound to 'http://localhost/webs/msgDetails.xsd'. (Indeed, here you see that prefix p is also bound to that namespace. This seems to be superfluous to me, as the prefix is never used.)
    Consequently, the qualified name of that element is: 'sender' in namespace 'http://localhost/webs/msgDetails.xsd'.
    Thus, both tags represent elements with the same qualified name. For more details look at http://www.w3.org/TR/REC-xml-names/.
    Greetings Stephan

  • HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    See https://discussions.apple.com/message/19218571#19218571.

  • Clearing of Change in Stock Account at the time of GR for Subcontracting

    Dear,
    We have created a PO with Item Category "L" for subcontracting.
    At the time or GR system has posted below accounting entries:
    GR/IR clearing account 500 -
    External service account 500 +
    Stock account: end product 950 +
    Change involving stocks 950 -
    Stock account: comp. 450 - (components cost)
    Consumption account 450 +
    I want to know how to clear Change in Stock Account.
    Please advise.
    Regards,
    Vivek

    Hi:
            As per my understanding this happens when MIGO is done in case of a subcontracting PO
    Stock-CS/RM                                     Dr
    GR/IR Clear RM/PM/CS                             Cr
    Inventory Change Sub-Cont RM     Dr
    Ext Serv Sub-Cont                             Dr
    Stock-CS/RM                                             Cr
    Sub-Cont Cons RM                             Dr
    Upon MIRO
    Ext Serv Sub-Cont                             Cr
    GR/IR Clear RM/PM/CS             Dr
    Inv Change Sub-Cont RM     Dr
    Vendor                                            Cr
    Duties                                      Dr
    Stock-CS/RM                                   Cr
    Hence Inventory change account is cleared as soon as MIRO is done. Hope it will clear your understadning
    Regards

  • I want to purchase the student membership but i graduate in august...will i continue to pay the student prices for 1 year or will that change after august?, I want to purchase the student membership but i graduate in august...will i continue to pay the st

    I want to purchase the student membership but i graduate in august...will i continue to pay the student prices for 1 year or will that change after august?, I want to purchase the student membership but i graduate in august...will i continue to pay the student prices for 1 year or will that change after august?

    Hi there
    The Student membership is an annual plan so you'll pay the same price each month for 12 months regardless of when you graduate during that year.
    Thanks
    Bev

  • I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

    I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

    downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

  • Unable to reverse GR for subcontract PO

    Hi expert,
    When i try to reverse GR using 102 for subcontract PO,it prompt error Message no.M7389 Of the required quantity of material xxx,xxx PCA remain(s) open
    Any idea on what is the causes?

    Hi,
    The same problem was faced by me and unable to get any reasons.
    But, I was managed to cancel the doc. thro' MBST.
    Please try this out.
    Regards,
    Siva

  • TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

    My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
    Is there a fix or is this the straw that forces a switch to Lightroom?

    Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made.  That information is camera-vendor proprietary.
    Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set.  If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
    That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
    Aperture provides a starting point.  Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render.  In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in.  Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image.  If you want adjustments in a different direction, you can create a preset and set it at import.
    The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that."  It's, unfortunately, impossible to do.

  • What to do when the client asks for changes after final audio mix?

    Sometimes a client will want changes after the final audio mix has been done. That is, I've already sent the project from Premiere Pro to Audition, done a master mix, and sent it back to Premiere Pro. If I'm then asked to make changes to the video, I don't know of any way to preserve the work I've already done in Audition and just update it with changes. I find myself making the changes in Premiere Pro and re-sending the whole project back to Audition for a completely new mix. This isn't very time efficient, and I'm wondering if anyone knows if I can update a project in Audition with changes in Premiere Pro without having to start again?
    Obviously it's best to have picture lock before doing the final mix, but things happen and people change their minds.
    I'm working in CS6.
    Thanks
    Carolyn

    "The only question I have is whether it is possible to save any of the work
    I've done in Audition when I am resending back from Premiere."
    A: Absolutely
    "When I add more elements to my sequence and unmute the original track and export the
    new sequence to Audition, I am basically starting on a fresh mix, right?"
    A: Yes
    "It's a new sequence?"
    No. It's the same sequence. But without the tracks (stems) you previously had in it.
    "The only option seems to be to overwrite. My question is whether I can save any of the work I've already done in Audition- there is often a couple of hours of work in already.
    A: Before you do anything, save whatever work you've done in Audtion as a session.

  • Change the license key for BOXI3.1 after installation

    Are there problems if i change the license key for BOXI3.1 after installation?
    (Not performing a upgrade from trial version)
    Or do i have to do a re-installation instead?

    Hi,
    Sure you can change the license key, without re-doing a complete install of BO XI. Just go to CMC->Lisence Keys, and add your new product key.
    Then you 'll see bellow, the new information about u key (CPU/Date limitation).
    Regards
    Olivier

  • HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

    My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

    Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

  • Giving old ipad to partner after using it for six months.  Icloud, FaceTime and store Apple Id revised no problem. I'd like to change my iMessage user id too.  It won't let me.  Anyone know how?

    Giving old ipad to partner after using it for six months.  Icloud, FaceTime and store Apple ID revised no problem. I'd like to change my iMessage user id too.  It won't let me.  Anyone know how?

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
     Cheers, Tom

  • Ecc6, after i've changed all the passwords for all oracle users, then how

    ECC6, after i've changed all the passwords for all oracle users, now sap can't connect to oracle , then,  How can i config the sap to make sure it can boot normal?
    If our database is sqlserver, i've changed the database password for all database users, then, How can i config the sap?
    Thanks!

    My db is oracle ,                           the oracle host name is dbserver.
    The sap ap server only install the SAP. SAP host name is apserver.
    Just now i've altered all the password of the oracle database db user account, Include the account "sys".
    (I must alter the password.)
    Now the SAP service in the host "apserver" can't boot.
    Could you teach me  how can i config the "apserver" to make the SAP normal boot ?
    Thanks!
    Best regards!

  • System shud not allow for batch change after  bacth determiantion.

    Dear ALL,
       I have one Isuue at my client , there requiremtn is -
    "Performing the process it was detected that the raw material and packaging material  batches could be changed after the process order created, which allows to picking a batch instead FEFO. "
    Is there any way that system not allow for any change related to batch and its qunitity.
    Awaiting for fevorable respoce.
    Regards,
    Prerna Verma

    Hi Prerena,
    Activating Check Batch Tab in COR4 will performs an additional check in order itself.This check works after completing Batch Determination.For example during Batch Determination system has selected (as per your sort rule) Batch X for issue.But later User tries to change this Batch No. to Batch Y(by overwriting the batch no. in Batch field).But if you have activated this Check Batch function then system will perform the check immediately whether this new Batch complies the Batch Determination rule or not.And if found wrong then gives you an error or warning msg(depends oin your msg control).
    my second point is regarding Transaction code COB1 to deactivate the Allow change function.See if you activate the this tab then you finds that qty fields editable during Batch determination.So you can change the qty. manually during batch detemination.
    So in your case 2 level checks required.
    1) During Batch Determination (COB1) - Deactivate Allow change
    2) After Batch Determination(COR4) - Activate Check Batch
    Regards,
    Dhaval
    Edited by: Dhaval on Sep 27, 2010 8:43 PM

Maybe you are looking for