Map F1 Key in Microsoft Dynamics NAV 2013 R2

Hello Support,How to Program/Map F1 Key in Intermec Handheld device(CK3R) in Microsoft Dynamics NAV 2013 R2. I just attached mapping file. Can you help me out.  Regards, Kanthavel Ramachandran | MS Dynamics NAV Support Implementerwww.scsdynamics.com | [email protected] 330 N. Brand Blvd., Suite 870Glendale, CA 91203
Office: 310.315.9660Direct: 310.953.9179Cell: 408-431-2163

Hello RizaGrace,
Thank you for your Interest in Azure.
1. What exactly do you mean when you say 'best storage option', do you mean where will the Microsoft Dynamics NAV Server instances reside?
There are two topologies of deploying Dynamics NAV on Azure. You can refer to this article that will give you information on 'Network Topologies for Microsoft Dynamics NAV on Windows Azure':
http://msdn.microsoft.com/en-us/library/dn168979(v=nav.70).aspx
Also refer to the article that wil give you inforamtion on 'Planning and Preparing for Deploying on Windows Azure':
http://msdn.microsoft.com/en-us/library/dn168978(v=nav.70).aspx
These are the example scripts for Deploying Microsoft Dynamics NAV on Windows Azure:
http://msdn.microsoft.com/en-us/library/dn168991(v=nav.70).aspx
I hope that this information is helpful. Please feel free to get back if you have any related questions.
Thanks,
Syed Irfan Hussain

Similar Messages

  • Jet Express connect to Microsoft Dynamics NAV 2013 R2

    I meet some problem when I use Jet Express to show report in excel.
    The message error is below:
    The ulr 'http://navap:7047/DynamicsNAV71/WS/SystemService' is not valid.
    The remote server returned an error: (401) Unauthorized.
    Why are we get this message?
    How can I do to fix this error?
    Many Thanks,

    If you use Microsoft Dynamics NAV 2013 (or 2013R2), you need to use Perpetual license model. If you use it, you need 'Starter Pack'+'Extended Pack' and you will get all manufacturing modules.
    You can use only Microsoft SQL, no Oracle.
    You can buy separately SQL and NAV, but you also van buy SQL together with NAV in first buying (you will pay only SQL CALs).
    You cannot use Oracle for NAV, but if you have some application on Oracle, you can integrate it with NAV, e.g. using web-services.
    If you have additional questions about NAV, I suggest you to write on Dynamics Community forum:
    https://community.dynamics.com/nav/f/34.aspx

  • What is the best Storage for Microsoft Dynamics NAV 2013

    If I want my Microsoft Dynamics NAV reside in Microsoft Azure, what is the best storage option?

    Hello RizaGrace,
    Thank you for your Interest in Azure.
    1. What exactly do you mean when you say 'best storage option', do you mean where will the Microsoft Dynamics NAV Server instances reside?
    There are two topologies of deploying Dynamics NAV on Azure. You can refer to this article that will give you information on 'Network Topologies for Microsoft Dynamics NAV on Windows Azure':
    http://msdn.microsoft.com/en-us/library/dn168979(v=nav.70).aspx
    Also refer to the article that wil give you inforamtion on 'Planning and Preparing for Deploying on Windows Azure':
    http://msdn.microsoft.com/en-us/library/dn168978(v=nav.70).aspx
    These are the example scripts for Deploying Microsoft Dynamics NAV on Windows Azure:
    http://msdn.microsoft.com/en-us/library/dn168991(v=nav.70).aspx
    I hope that this information is helpful. Please feel free to get back if you have any related questions.
    Thanks,
    Syed Irfan Hussain

  • Microsoft dynamics Navision 2013 R2

    In Microsoft Dynamics Navision 2013 R2- while passing the goods receipt note. how many GL entries are creating. and how to configure the same . If any provision entries are creating auto mated.
    Goods receipt note has been posted, but purchase invoice is pending to post. Trail auto provision entries are passing in sap. In Navision is having any provision .

    Got a call from MS support, its across the entire service. They are working hard to fix meanwhile they provided a work around I am not sure if it will work for everyone but 
    https://ORGNAME--s.crm4.dynamics.com worked for me. Or variations where --d becomes --s
    so that is the normal url https://ORGNAME.crm4.dynamics.com/ you take the orgname and add --d or --s followed by crm4.dynamics.com 
    Only works in IE 
    teach a man to fish ... etcetera

  • Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

    If incorrect forum, just alert and move.  I am having an issue with hosted Microsoft Dynamics 2013 and Google Chrome latest release, 31.   This just started with the hosted version of Dynamics CRM 2013, Chrome had been working correctly with
    our earlier version of CRM.
    When users on latest version of Chrome, 31, login to Dynamics CRM 2013, everything looks fine.  Issue is specifically, for sales folks, when they open a client record, and where the client info is located, there is a standard date and time and tiny
    little calendar you can pull up if you click on it.  When the user clicks on the tiny little calendar, they DO get a pop up, but the pop up is blank.  And, there is no error message at all.  Nothing freezes, nothing bad happens at all, except
    for the salesperson, who live and die by their calendars and ability to schedule appointments and see exiting appointments.
    This is not some in house coding issue.  It is a generic CRM phone call record that has this issue. 
    Again, no errors, nothing crashes, but Dynamics CRM 2013 is useless to Google Chrome users in house because of this. Which, in a support position, is terrible.  Users who got an upgrade, have their favorite interface rendered useless.  And these
    are sales folks.  And, I did all settings according to what I was able to find for CRM 2010 and Chrome, for when pop ups do not work, and all settings were already correct for pop ups, website is in trusted sites, etc, which is what I expected, since
    everything worked on CRM 2010.
    Any clues or ideas? Thank You.
    Rick

    We don't know. Better to ask over here.
    https://community.dynamics.com/crm/f/117.aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Microsoft Dynamics Navision 2013 issues

    Myself Nilesh Jain, from Kiran Machine Tools Ltd. Jalgaon, State- Maharashtra, Country - india. We have started using Microsoft Navision 2013 since last year. We have been facing few issues with Navision like Buggs in Creating Purchase Order, Subcontracting
    Order, not so logical sequence of Lot No. And we are compelled to buy a Support Contract from the Navision Implementer (in our case its Godrej Infotech Limited, Mumbai, India) to solve these issues. I want to discuss all these issues with Microsoft Technical
    Person so that the new users will not have to spend money for Microsoft Mistakes and their Customer Satisfaction level will be high which ultimately is going to support Microsoft.
    Also in the Forum Category above, there is no option for Microsoft Dynamics Navision. Which option to choose. Lots of issues. Here I am choosing a random option. Pl. bear with me. 
    Pl reply me on our company email id
    [email protected]
    Nilesh Jain
    GM

    Got a call from MS support, its across the entire service. They are working hard to fix meanwhile they provided a work around I am not sure if it will work for everyone but 
    https://ORGNAME--s.crm4.dynamics.com worked for me. Or variations where --d becomes --s
    so that is the normal url https://ORGNAME.crm4.dynamics.com/ you take the orgname and add --d or --s followed by crm4.dynamics.com 
    Only works in IE 
    teach a man to fish ... etcetera

  • Does Eloqua Integrate with MicroSoft Dynamics CRM 2013 and or 2015

    We are planning to upgrade from Dynamics CRM 2011 to 2013 or 2015.  I cannot find information to confirm Eloqua will integrate with the newer versions of Dynamics CRM.  I 'hear'  Eloqua will integrate with 2013. Does anyone integrate Eloqua with Dynamics 2013 or 2015?

    Hello-
    We actually integrate with MS Dynamics, both 2013 and 2015 versions and would gladly help you.
    Feel free to visit our website for more info: www.putitforward.com/omc
    Here's a video on our YouTube channel about MS Dynamics 15 to Eloqua integration.
    Hope this helps!
    If you have any additional questions, let me know and I'll send you more info.

  • Error while installing the Microsoft Dynamics CRM 2013 Report Authoring Extension set up

    HI Experts,
    I am trying to install Report Authoring extension tool to work with MS CRM 2015 online reports but unable to install, getting below error even though I am having VS 2013, SQL Server 2014 and Data tools for VS 2013 installed on my machine.
    Please help me to fix this issue.
    When I double click the error getting below error.
    Error : Business Intelligence Development Studio is not installed for Microsoft SQL Server Reporting Services.
    When I click the details , getting below error.
    Thanks
    Baji Rahaman

    The Report Authoring Extensions (any version) don't support VS 2013. Currently the Crm 2015 Report Authoring Extensions support VS 2012 and VS 2010, and the Crm 2013 Report Authoring Extensions supports only VS 2010.
    By the way, the error you posted suggests you're trying to install the Crm 2011 Report Authoring Extensions
    Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

  • Connection Microsoft Dynamics Nav to a weigh bridge machine

    I want to read data from a digital weigh bridge from Navision anyone out there with a solution.

    You can use web-services in NAV for it. If you need details, try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

  • Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

  • MS Dynamics CRM 2013 install via GPO

    Good Morning,
    I need to rollout MS Dynamics CRM 2013 to all 180 of my users. I would like to do this via GPO but I only have the .exe install files and no .msi files. I have adhered to the following -
    http://technet.microsoft.com/en-us/library/hh699775.aspx
    I have followed the steps under the section Create the CRMCLient_bitversion.msi file
    but I am not achieving any administrative installation files. For example I have a network share setup as follows -
    \\server\crm_files\test
    I have mapped a network folder via command prompt using the net use command to map the Z: drive to
    \\server\crm_files. As per the instructions I have run the following command -
    CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
    When I run this command I am prompted to click Run or Cancel so I click Run. After 2-3 seconds I then get a dialog box showing the different switches that I can run with the only other option being to close the box. After closing the box I look in my
    test folder and it is empty.
    Should there be something in the test folder? Have I run the wrong command string?
    EDIT: Please note that I only have the installation/.exe file for CRM 2013. The article on the link I posted earlier mentions an XML file that is included with the installation files. I do not have this XML file.
    Jeet S

    Hi,
    Have you checked this article?
    Install Microsoft Dynamics CRM for Outlook using a command prompt
    ==============
    CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
    The command here is not in the right way, we need first to extract files from the
    CRM2013-Client-ENU-i386.exe, under the folder we will find the
    SetupClient.exe and the mentioned XML files.
    Run this command to extract the file:
    CRM2013-Client-ENU-i386.exe /extract
    Then use the command below to create an MSI file:
    Setupclient /Q /A /targetdir "\\share\mscrm_client_admin"
    Besides, for Microsoft Dynamics CRM 2013 deployment, we'd better ask in the forum below:
    Microsoft Dynamics CRM Forum
    http://community.dynamics.com/crm/f/117.aspx?pi49901=0
    Best regards
    Michael Shao
    TechNet Community Support

  • Adobe EchoSign Announces Completely New Integration with Microsoft Dynamics 2013

    The release of the EchoSign for Microsoft Dynamics 2013 integration is now available.
    Dynamics 2013 is Microsoft’s latest CRM product. The version of Dynamics sports a brand new UI and a complete redesign. Microsoft has also been updating their CRM Online customers fairly aggressively to this new version. The EchoSign integration for Dynamics 2013 follows our integration philosophy of enabling the full functionality for sending, tracking and managing EchoSign transactions from within native environment. The Dynamics 2013 integration includes:
    • Ability to send documents directly from within Leads, Opportunities, Contacts, and other Microsoft Dynamics entities including custom entities
    • Real-time status tracking of EchoSign transactions with visibility to EchoSign events in the Dynamics Activity Feeds
    • Automatically merging data from Microsoft Dynamics fields into contracts, and push data from signers back to Dynamics fields
    • Ability to attach invoices or custom reports and send them for signature. This allow dynamic generation of documents and forms using the native Microsoft capability and be able to leverage that within our integration
    • Record and store the signed agreements and the audit trail that capture each step in a contract’s history

    The release of the EchoSign for Microsoft Dynamics 2013 integration is now available.
    Dynamics 2013 is Microsoft’s latest CRM product. The version of Dynamics sports a brand new UI and a complete redesign. Microsoft has also been updating their CRM Online customers fairly aggressively to this new version. The EchoSign integration for Dynamics 2013 follows our integration philosophy of enabling the full functionality for sending, tracking and managing EchoSign transactions from within native environment. The Dynamics 2013 integration includes:
    • Ability to send documents directly from within Leads, Opportunities, Contacts, and other Microsoft Dynamics entities including custom entities
    • Real-time status tracking of EchoSign transactions with visibility to EchoSign events in the Dynamics Activity Feeds
    • Automatically merging data from Microsoft Dynamics fields into contracts, and push data from signers back to Dynamics fields
    • Ability to attach invoices or custom reports and send them for signature. This allow dynamic generation of documents and forms using the native Microsoft capability and be able to leverage that within our integration
    • Record and store the signed agreements and the audit trail that capture each step in a contract’s history

  • How to Repair Microsoft Dynamics CRM Server 2013 once the update rollup or service pack is installed?

    Hello,
    I am going through the following Technet article:
    Repair Microsoft Dynamics CRM Server 2013 (
    https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
    The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
    My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
    Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
    Thank you,

    Hello,
    I am going through the following Technet article:
    Repair Microsoft Dynamics CRM Server 2013 (
    https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
    The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
    My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
    Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
    Thank you,

  • NAV 2013 R2; How to run a customized report (206 sales invoice) in the classic client

    Hello, in preparing a newly installed NAV 2013 R2, I'm questioning the following:
    In the Development Environment I have customized report 206 Sales - Invoice in the Design menu View Layout with the space of the logo (by Microsoft SQL Server Report Builder) and
    finally saved and compiled.
    When I do run it connects to the server of what I call the classic client or the real NAV 2013 R2 and I can select a posted sales invoice to show the new layout and the result is
    fine as customized as I wanted.
    When I later ordinary print one of the posted sales invoices this customized logo layout doesn't appear on the print. I print in PDF and paper. When I make a next new sales invoice
    this new layout is not in use either.
    Another thing is run print started from the Development Environment is called Sales - Invoice in the header and not just Invoice that it the name when printing when invoicing and
    printing of posted documents.
    Additionally this form of Sales - Invoice shows our company details and good information as web, e-mail, bank account and bank name that is well demanded on a perfect invoice.
    How to get these informations out normally?
    Is the classic client having a wrong report as sales invoice?
    How to run a customized report (206 sales invoice) in the classic client NAV 2013 R2?
    It is like the customized report (206 sales invoice) is not in use yet in the classic client.
    All you wise people out there are welcomed to help me now
    Best regards
    Carsten

    Try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

  • Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

    Team,
    Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
    Log Name:      Lync Server
    Source:        LS Server
    Date:          12/30/2013 12:10:55 PM
    Event ID:      12290
    Task Category: (1000)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ACS465-BH102.me.ykgw.net
    Description:
    The evaluation period has expired.
    The evaluation period for Microsoft Lync Server 2013  has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
    Cause: The evaluation period for Microsoft Lync Server 2013  has expired.
    Resolution:
    Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="LS Server" />
        <EventID Qualifiers="50152">12290</EventID>
        <Level>2</Level>
        <Task>1000</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
        <EventRecordID>73953</EventRecordID>
        <Channel>Lync Server</Channel>
        <Computer>ACS465-BH102.me.ykgw.net</Computer>
        <Security />
      </System>
      <EventData>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Schannel
    Date:          12/30/2013 12:13:36 PM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      ACS465-BH102.me.ykgw.net
    Description:
    The following fatal alert was generated: 10. The internal error state is 1203.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
        <EventRecordID>83985</EventRecordID>
        <Correlation />
        <Execution ProcessID="556" ThreadID="3668" />
        <Channel>System</Channel>
        <Computer>ACS465-BH102.me.ykgw.net</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">1203</Data>
      </EventData>
    </Event>
    Server is already on Full version, ran Reset-CsPoolRegistrarState
    for fillrest as wel as serviceret
    Followed below as well,
    http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
    Currently done failover to another pool and users can login,
    however i cant get the front end service on this server.Any pointers would be appreciated.
    Praveen | MCSE Messaging 2003

    rit, the command is not doing the trick since its already full version,
    PS C:\Users\lyncadmin> Get-CsServerVersion
    Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
    only one server in one pool, total two pools.
    Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
    Log Name:      System
    Source:        Schannel
    Date:          12/30/2013 9:26:34 AM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      ACS465-BH102.me.ykgw.net
    Description:
    The following fatal alert was generated: 10. The internal error state is 1203.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
        <EventRecordID>64911</EventRecordID>
        <Correlation />
        <Execution ProcessID="556" ThreadID="620" />
        <Channel>System</Channel>
        <Computer>ACS465-BH102.me.ykgw.net</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">1203</Data>
      </EventData>
    </Event>
    Praveen | MCSE Messaging 2003

Maybe you are looking for