Map goes backward while I go forward on the new Ov...

Hi, everybody.
It seems that another guy also noticed this phenomenon. And I'm glad. I'm not alone.
In first hand, I thought it was a tecnical failure, GPS broken.. and it causes me a little anxiety and headache.
Why is it not possible anyway to have the maps following the direction ?
The most bizarre thing is when i go forward and the maps show a backward advancement following the north pole.
Yes, indeed it is set on direction mode when i put the final destination.. but once i know the road, I don't need anymore to put the destination..
Now i cannot see the road that will be next and prevail me against accident or something else.
I used the 5800 navigation edition during a month without putting any destination. I had the liberty to ride my next road.
Now, it is impossible.
You must put this again.. It is such important.
Thank you for your attention.
Alex.

I'm not trying to be critical but It is really difficult to read your post without punctuation.
If your battery is draining too quickly, read this for some tips on how to get the most of the iPad battery.
http://www.apple.com/batteries/ipad.html

Similar Messages

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

HT201269 I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one. I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone

I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one. I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone carrier. Question is how do I turn my iMessage off through a computer that is not a mac.

http://support.apple.com/kb/TS5185
last paragrapgh of Resolution

If you change the image mode of this image from 8-bit RGB image to Grayscale mode while in PSCS – what will the new Pixel Count be?

If you change the image mode of this image from 8-bit RGB image to Grayscale
mode while in PSCS – what will the new Pixel Count be?

If you mean by Pixel count the number of pixels, this will not change. The image will have the same size thus the same number of pixels.

TS3694 i just received error number 6 while trying to update to the new ios7

I just received error number 6 while trying to update to the new ios7. How do I fix this?

3194?
http://support.apple.com/kb/TS3694#error3194
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

HT201210 I am using a 3GS iphone.While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with n

I am using a 3GS iphone. While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change.I am using a 3GS iphone.While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change?

If you are having the same issue on several computers then it is a hardware issue! Not a software issue! Replacement is the only resolution!
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

A while typing cat disappeared in the new UI

Hi. I have noticed that loved by many eastern-egg-feature of while typing cat (holding 3+ buttons which are not near simultaniously) has dissapeared :'(
Is it just a bug, or cruel devs have decided to remove the cute cat for good?

If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

"not enough space" while 1GB still free with the new itunes

since I'va updated my itunes on mac OS X Lion, I haven't been able to sync my 32 GB ipod touch while itunes says it has still more than 1GB free, whenever I'm tying to sync, it actually says to me that i need 17,5 GB more to hold ALL my library which is getting annoying. So I read the support here http://support.apple.com/kb/TS1503 but none of the solutions worked. Any ideas how can I resolve the issue ?

I note that the last post on this string was 18 Mar 13. Did somebody post a fix?
I have this issue with my iPod 5 using iTunes 11.2.2.3. I have unticked everything (I have only music, no videos, photos, etc), and it still says that there is 3282 songs in the iPod taking up 19.13 GB. When I go the music tab, there are only two songs listed (I don't know why there should be any listed, as everything unticked) totalling 13 MB. How do I clear my iPod of all these 3282 "ghost songs" and sync only what I tick?

General Comment - Looking forward to the new CC Sync

I just read the blog announcing the pre-release of the revised CC sync utility and am looking forward to it... especially after what happened today with my SkyDrive account.
This morning I began working on a Word 2013 document, autosaving every 10 minutes and randomly manually saving as well with a few keystrokes... and some 6 hours later the screen flickered, SkyDrive refreshed or something along that line, and all of the work I performed today disappeared and was not recoverable.
The beta CC Sync that was released last year regularily created duplicate copies of files on my local drive and on the Adobe Cloud. At that time, I was somewhat annoyed by the redundancy, but after today, hope that feature will remain.
After my loss today, I would much rather set aside a few moments to manually control the deletion of redundant files than dedicate an additional six hours to re-writing and re-editing everything that was lost in some upload mishap.

I am sure most ALL the paying Creative Cloud subscribing customers are looking forward to actually using the advertised features that they have been paying for but have not been available for use. Maybe the "Coming Soon" has finally arrived months later and the silence will be broken. Rejoice CC users your payments were not in vain, you will soon be able to use the advertised features. Let's just hope the wait was worth it and the same issues that plague CC in general that are rampant for CC users as seen on the forum here don't creep into these features with there own reoccurring issues. One would think given the delay Adobe would hopefully get it right and it wont be yet another public beta that gets pulled as before.

Is there a way to download and use an old verison (3) while also maintaining and using the newer verion? One of my clients using an invocing system that only supports up to version 3.

I have a major client whose invoicing system only supports up to version 3 of Firefox. I'd love to be able to invoice them from home, but I don't want to downgrade my newest version of Firefox just for them.
Is there a way to download Firefox 3 and install it, while still maintaining my version 6? I am using a new MacBookPro with OS 10.6.8.

you can restore from your backup again just to get the notes. once you've restored from the backup, copy your notes into your icloud notes group or email them to yourself - basically, get them somewhere else so they're not just locally stored on the device. once you've moved your notes elsewhere, restore the device as new again like apple had you do. this will again put a fresh version of the operating system on your phone like it has right now
there's no other way to access the notes that are in your backup

Links in email won't open. When I click on a link, it goes to open tabs in FF, but the new link doesn't open.

When I get a link sent in an email, the link no longer opens when I click on it. When I click on the link, Firefox and the open internet tabs appear on my screen, but the new link does not open. I must manually copy the link, then paste it in the address bar to get it to open.

I have the same problem with FF 3.6.13, and Mac OS 10.6.5.
Clicking links in Mail opens FF, but does not open the URL. Safari has no problems when I reset it as my default browser. The problem seems to develop over time. At first, links open fine, but then all of a sudden they won't.
My remedy has been to reinstall FF, but I've had to do it twice in the last couple of weeks, which is getting a bit annoying.
I have not experienced the problem on either of my two older Macs (running 10.4, and 10.5).

HT201263 while on vacation in france i downloaded the new iOS for my iPhone 4. Was asked to choose a location. By mistake i click on local location, hence France. Since then my iTunes, app. store and more are located to France. Can no longer access up-dat

HELP! while in France i downloaded the new iPhone iOS 6. When asked to choose a location ( for maps to know what to do) i made the wrong choice and clicked on local, hence France. This scewed up my US iTunes account as well as apps store. . . so ican no longer acces it or download updates. . . it crerated more havoc that ican bare as in iTunes being located in France and in Euros. OUCH. i thought to restore iPhone to factory default. Will that do it or create more problem. (don't want to wtach US movies in French!!!)
My question reall is how can i swithed back my location to USA. . .
thanks for your help, out there.

If you go to iTunes on your computer click on the App Store and scroll all the way down . In the bottom right of the screen is a map logo. Click on that and then chose the flag for the country you want

TS1702 Dear Apple: You've lost your way with the new Map app

Dear Apple:
I have always been a faithful iPhone user because I believed it was the best device on the market. Other phones keep coming out with useful and fun features and applications, but I remained loyal to the iPhone, knowing that it was a game of leap-frog and Apple would always catch up and surpass the competition.
Now, unfortunately, you have fallen short. Not only did you not beat the competition, but you took a big step backwards with your Map application.
I rely on a good map app to help me get around a city that is still new to me, find stores and locations quickly and easily, and get information on public transportation. Your map app can do none of that. It's cumbersome, not integrated with public transit routes, and doesn't even know where my local BevMo! is.
I don't just want the old Map app back, I NEED it back. The new one feels crippling compared to what I had before. I'm struggling with it on every use, and am longing for the old app on every usage.
I don't care about your competition with Google. That's between you and them. But don't make the customer the victim of this war. Swallow your pride and admit that Google beat you handily on this one front. And then get the old Map app back for me. It will make Apple the winner in the long run, I promise.
Sincerely,
Eric

This is a user to user help forum only. You are not addressing anything to Apple here.
The licensing agreement between Apple and Google for the Maps app and YouTube app expired. Rumor has it Google wanted to include advertising with Apple's Maps and YouTube apps and probably wanted to increase their licensing fee. It isn't coming back.
http://maps.google.com

Optimiser difference : a max() sometimes doing a backward scan and sometimes forward scan

I interested why we get 2 different query plans on Sybase 15.5 and 15.7 for similar queries
declare @MID int
select @MID = 25717
select MID , max(Date) from CB where MID = @MID group by MID
select @MID, max(Date) from CB where MID = @MID
The index is on (MID, Date).
The first does forward scan and the second does a backward scan.
With our data, the first query does 8000 page reads (with a SAN read costing 4ms = 32s)
and the second query does 4 page reads (with a SAN read costing 4ms = 16ms)
1)
|   |   |GROUP SORTED Operator (VA = 1)
|   |   | Evaluate Grouped MAXIMUM AGGREGATE.
|   |   |
|   |   |   |SCAN Operator (VA = 0)
|   |   |   | FROM TABLE
|   |   |   | CB
|   |   |   | Index : IDX1
|   |   |   | Forward Scan.
|   |   |   | Positioning by key.
|   |   |   | Index contains all needed columns. Base table will not be read.
|   |   |   | Keys are:
|   |   |   |    MID ASC
|   |   |   | Using I/O Size 16 Kbytes for index leaf pages.
|   |   |   | With LRU Buffer Replacement Strategy for index leaf pages.
2)
|   | Evaluate Ungrouped MAXIMUM AGGREGATE.
|   | Scanning only up to the first qualifying row.
|   |
|   |   |SCAN Operator (VA = 0)
|   |   | FROM TABLE
|   |   | CB
|   |   | Index : IDX1
|   |   | Backward scan.
|   |   | Positioning by key.
|   |   | Index contains all needed columns. Base table will not be read.
|   |   | Keys are:
|   |   |    MID ASC
|   |   | Using I/O Size 2 Kbytes for index leaf pages.
|   |   | With LRU Buffer Replacement Strategy for index leaf pages.
Why does the optimiser generate different plans ?

Okay - so the one reason I like to see plancost vs. just showplan...you can see in the one without the group by clause that it does a ScalarAgg vs. a GroupSorted ala:
(without group by clause)
==================== Lava Operator Tree ====================
                        Emit
                        (VA = 2)
                        r:1 er:1
                        cpu: 0
            ScalarAgg
              Max
            (VA = 1)
            r:1 er:1
            cpu: 0
IndexScan
IDX1
(VA = 0)
r:1 er:1
l:3 el:3
p:3 ep:3
============================================================
(with group by clause)
==================== Lava Operator Tree ====================
                                    Emit
                                    (VA = 3)
                                    r:1 er:8
                                    cpu: 300
                        Restrict
                        (0)(0)(0)(4)(0)
                        (VA = 2)
                        r:1 er:8
            GroupSorted
            Grouping
            (VA = 1)
            r:1 er:8
IndexScan
IDX1
(VA = 0)
r:353666 er:158986
l:863 el:386
p:176 ep:78
============================================================
Now the key to the problem is in the GroupSorted function.
But, let's step back a bit.   Query optimization is just one of the many (and nearly final) steps prior to query execution. Prior to query optimization we have the TDS Receive buffers, the SQL parsing, the SQL normalization and pre-processing.   In the pre-processing, we normally try to construct what is called the LOP (Logical Operator) tree.   Note that no-where in that sequence is any execution - I mention this because once before you commented on someone else's posting about a purported optimization problem with
select * from table where column=<value> or 1=2
....the notion of evaluating 1=2 wouldn't happen until the execution phase - so optimization will not consider it - in this case it looks it at as an expression to be evaluated and skips it.   If you want to see what I mean do a showplan and statistics io on
select * from sysobjects where 1=2
and you will see that due to lack of sargs we do a tablescan from the optimizer due to lack of sargs...but it is during query execution that we short circuit and hence the 0 LIO's.    I point that out because there are different phases involved and in this case it is the pre-processor that selects the overall LOP tree to start with....but then the optimizer has to consider which LOPs to use underneath that such as GroupSorted (using an index) vs. GroupSorting (sort operation), etc.
Soooo....in the GROUP BY example, it starts with:
The Lop tree:
( project
        ( group
                ( scan CB
vs. your other example (without the Group By):
The Lop tree:
( project
        ( scalar
                ( scan CB
....so you can see the difference right off the bat in what the optimizer received from the pre-processor.   Like I pointed out earlier, the problem *started* the second you put the group by clause in - before the optimizer even got to look at.
You then get 2 optimization blocks....the innermost for the (scan CB) and then the outer for (group (inner block)) ala:
OptBlock1
        The Lop tree:
        ( scan CB
        Generic Tables: ( Gtt1( CB ) Gti2( IDX1 ) )
        Generic Columns: ( Gc0(CB ,Rid) Gc1(CB ,MID) Gc2(CB ,ValuationDate)) Virtual Generic Columns: ( )
        Predicates: ( { CB.MID Gtg0.Gc4 } = 0 tc:{1} )
        Transitive Closures: ( Tc0 = { Gc0(CB ,Rid)} Tc1 = { Gc1(CB ,MID) Gc4(Gtg0 ,_gcelement_4)} Tc2 = { Gc2(CB ,ValuationDate)} )
OptBlock0
        The Lop tree:
        ( pseudoscan
        Generic Tables: ( Gtg0 )
        Generic Columns: ( Gc3(Gtg0 ,_gcelement_3) Gc4(Gtg0 ,_gcelement_4) Gc5(Gtg0 ,_virtualagg) Gc6(Gtg0 ,_virtualagg)) Virtual Generic Columns: ( )
        Predicates: ( { CB.MID Gtg0.Gc4 } = 0 tc:{1} )
        Transitive Closures: ( Tc3 = { Gc3(Gtg0 ,_gcelement_3) Gc5(Gtg0 ,_virtualagg) Gc6(Gtg0 ,_virtualagg)} Tc1 = { Gc1(CB ,MID) Gc4(Gtg0 ,_gcelement_4)} )
The question is, why did we estimate 8 rows returned from the group by????   And would that change the behavior???
That comes from this section:
        ( PopGroupSorted
                proj: {{ CB.MID Gtg0.Gc4 } ,{ Gtg0.Gc3 Gtg0._virtualagg Gtg0._virtualagg } }
                pred: [Tc{} Pe{{ CB.MID Gtg0.Gc4 } = 0}]
                subs: {CB.MID ,Gtg0._virtualagg }
                cost: 66305.12
                I/O estimate : [
                        rowcount=7.388771
                        averagewidth=19
                        pages=1
                        prefetchpages=1
                        lio=0 pio=0 cpu=158985.8
                        total lio=385.3457 total pio=77.60534 total cpu=635943
                        tempdb=0
                Cache Strategy: [
                        prefetch=YES
                        iosize=131072 Bytes
                        bufreplace=LRU
                order: none
                ( PopIndScan index: Gti2( IDX1 )
                                table: Gtt1( CB )
                        proj: {{ CB.MID Gtg0.Gc4 } ,{ CB.ValuationDate } }
                        pred: [Tc{} Pe{{ CB.MID Gtg0.Gc4 } = 0}]
                        subs: {CB.MID ,CB.ValuationDate }
                        cost: 50406.55
                        I/O estimate : [
                                rowcount=158985.8
                                averagewidth=14
                                pages=383.3457
                                prefetchpages=383.3457
                                lio=385.3457 pio=77.60534 cpu=476957.2
                                scanlio=385.3457 scanpio=77.60534 scancpu=476957.2
                                tempdb=0
                        Cache Strategy: [
                                prefetch=YES
                                iosize=131072 Bytes
                                bufreplace=LRU
                        order: none )
Now to understand what is happening, let's take the bad example:
select MID , max(Date) from CB where MID = @MID group by MID
Now, let's make it a bit more generic:
select type, count(*), max(crdate)
from sysobjects
where type='P'
group by type
If run in master on my machine, I get:
type
P             20             Oct 2 2014 12:23PM
...as a result, with an initial LOP of:
The Lop tree:
( project
( group
( scan sysobjects
Which should be no surprise....with no index on type...or due to the quantity of rows in sysobjects, we simply go for a tablescan.   But we have our (group ) LOP.....and if we look at the plancost:
==================== Lava Operator Tree ====================
                                    Emit
                                    (VA = 3)
                                    r:1 er:2
                                    cpu: 0
                        Restrict
                        (0)(0)(0)(4)(0)
                        (VA = 2)
                        r:1 er:2
            GroupSorted
            Grouping
            (VA = 1)
            r:1 er:2
TableScan
sysobjects
(VA = 0)
r:20 er:19
l:8 el:8
p:0 ep:2
============================================================
We see sort of the same problem....we are estimating 2 rows to be returned from the group by.
Stepping back a bit, remember, if we don't have any stats on a column, we assume 0.1 for =, 0.25 for bounded range (between) and 0.3 for unbounded range.   In my case, with no stats on type in sysobjects in master, we can see this clearly in the index selectivity area of:
The table (Datarows) has 188 rows, 6 pages,
Data Page Cluster Ratio 0.9999900
    type = 'P'
   Estimated selectivity for type,
        selectivity = 0.1,
    Search argument selectivity is 0.1.
    using table prefetch (size 32K I/O)
    Large IO selected: The number of leaf pages qualified is > MIN_PREFETCH pages
    in data cache 'default data cache' (cacheid 0) with LRU replacement
In the index selectivity due to using the magic values.   In the group by costing, we see:
( PopGroupSorted
proj: {{ sysobjects.type Gtg0.Gc5 } ,{ Gtg0.Gc3 Gtg0._virtualagg Gtg0._virtualagg } ,{ Gtg0.Gc4 Gtg0._virtualagg Gtg0._virtualagg } }
pred: [Tc{} Pe{{ sysobjects.type Gtg0.Gc5 } = 'P'}]
subs: {sysobjects.type ,Gtg0._virtualagg ,Gtg0._virtualagg }
cost: 65.44175
I/O estimate : [
   rowcount=1.88
   averagewidth=21
   pages=1
   prefetchpages=1
   lio=0 pio=0 cpu=18.8
   total lio=8 total pio=1.00007 total cpu=244.4
Cache Strategy: [
   prefetch=YES
   iosize=4096 Bytes
   bufreplace=LRU
order: none
( PopTabScan table: Gtt1( sysobjects )
   proj: {{ sysobjects.type Gtg0.Gc5 } ,{ sysobjects.crdate } }
   pred: [Tc{} Pe{{ sysobjects.type Gtg0.Gc5 } = 'P'}]
   subs: {sysobjects.type ,sysobjects.crdate }
   cost: 63.56175
   I/O estimate : [
   rowcount=18.8
    averagewidth=12
    pages=8
    prefetchpages=8
    lio=8 pio=1.00007 cpu=225.6
    scanlio=8 scanpio=1.00007 scancpu=225.6
   Cache Strategy: [
    prefetch=YES
    iosize=32768 Bytes
    bufreplace=LRU
   order: none )
Now....to go from the row count to the estimated rows for a group by, we don't use the column selectivity - we use column density stats. The real reason behind the 0.1 is that we are saying is that there likely is only 10 distinct values.   For example, if I update statistics sysobjects (type) in my system, the output changes to:
==================== Lava Operator Tree ====================
                                    Emit
                                    (VA = 3)
                                    r:1 er:1
                                    cpu: 0
                        Restrict
                        (0)(0)(0)(4)(0)
                        (VA = 2)
                        r:1 er:1
            GroupSorted
            Grouping
            (VA = 1)
            r:1 er:1
TableScan
sysobjects
(VA = 0)
r:20 er:21
l:8 el:8
p:0 ep:2
============================================================
Which is based on:
( PopGroupSorted
proj: {{ sysobjects.type Gtg0.Gc5 } ,{ Gtg0.Gc3 Gtg0._virtualagg Gtg0._virtualagg } ,{ Gtg0.Gc4 Gtg0._virtualagg Gtg0._virtualagg } }
pred: [Tc{} Pe{{ sysobjects.type Gtg0.Gc5 } = 'P'}]
subs: {sysobjects.type ,Gtg0._virtualagg ,Gtg0._virtualagg }
cost: 65.80175
I/O estimate : [
   rowcount=1
   averagewidth=21
   pages=1
   prefetchpages=1
   lio=0 pio=0 cpu=20
   total lio=8 total pio=1.00007 total cpu=248
Cache Strategy: [
   prefetch=YES
   iosize=4096 Bytes
   bufreplace=LRU
order: none
( PopTabScan table: Gtt1( sysobjects )
   proj: {{ sysobjects.type Gtg0.Gc5 } ,{ sysobjects.crdate } }
   pred: [Tc{} Pe{{ sysobjects.type Gtg0.Gc5 } = 'P'}]
   subs: {sysobjects.type ,sysobjects.crdate }
   cost: 63.80175
   I/O estimate : [
    rowcount=20
    averagewidth=12
    pages=8
    prefetchpages=8
    lio=8 pio=1.00007 cpu=228
    scanlio=8 scanpio=1.00007 scancpu=228
Note that my overall rowcount went up a bit....but the group by went to 1 row....if we look at the column stats via optdiag:
Statistics for column:                                                          "type"
Last update of column statistics:                                               Feb 15 2015 9:18:32:850PM
     Range cell density:                                                        0.0053191489361702
    Total density:                                                             0.4216274332277049
     Range selectivity:                                                         default used (0.33)
     In between selectivity:                                                    default used (0.25)
     Unique range values:                                                       0.0053191489361702
     Unique total values:                                                       0.2000000000000000
     Average column width:                                                      default used (2.00)
     Rows scanned:                                                              188.0000000000000000
     Statistics version:                                                        4
Histogram for column:                                                           "type"
Column datatype:                                                                char(2)
Requested step count:                                                           20
Actual step count:                                                              9
Sampling Percent:                                                               0
Tuning Factor:                                                                  20
Out of range Histogram Adjustment is DEFAULT.
Low Domain Hashing.
     Step     Weight                    Value
        1     0.00000000       <=       "EJ"
        2     0.00531915        <       "P "
        3     0.10638298        =       "P "
        4     0.00000000        <       "S "
        5     0.30319148        =       "S "
        6     0.00000000        <       "U "
        7     0.56382978        =       "U "
        8     0.00000000        <       "V "
        9     0.02127660        =       "V "
....so the 20 rows are due to the slightly higher 0.10638 vs. 0.1...
Now....if we know the value for the where clause and have stats on the column, I notice we always estimate 1 row to be returned from the group by.   However, if we don't have stats - or if we don't know the value - we estimate more than one row.   For example if I declare @var for type ala:
declare @type char(2)
select @type='P'
select type, max(crdate)
from sysobjects
where type=@type
group by type
go
I then get:
( PopGroupSorted
proj: {{ sysobjects.type Gtg0.Gc4 } ,{ Gtg0.Gc3 Gtg0._virtualagg Gtg0._virtualagg } }
pred: [Tc{} Pe{{ sysobjects.type Gtg0.Gc4 } = '}]
subs: {sysobjects.type ,Gtg0._virtualagg }
cost: 83.58154
I/O estimate : [
rowcount=4.17777
   averagewidth=17
   pages=1
   prefetchpages=1
   lio=0 pio=0 cpu=79.26596
   total lio=8 total pio=1.00007 total cpu=425.7979
...if we have stats on type vs. the 1.88 when we don't.   Which points out that the uniqueness stats and selectivity are likely considered in the final cost of the group by.   In your case, the estimate of:
                I/O estimate : [
                        rowcount=7.388771
                        averagewidth=19
                        pages=1
                        prefetchpages=1
                        lio=0 pio=0 cpu=158985.8
                        total lio=385.3457 total pio=77.60534 total cpu=635943
                        tempdb=0
...is likely due to the column uniqueness and selectivity stats based on the @MID variable
Note that despite we now know the GROUP BY is only going to return a single row, we still don't change the plan.....we still hit the index in ascending fashion.   The reason why is that we don't assume (or should I say we don't make a special case) that the only aggregate is a max().   It could be count(), avg(), min() or a combination of which - any of could require reading every index row other than strictly min().   Could we do so?? Possibly.....however, arguable, the select max() without the group by is the more correct SQL to use....   We do (on the other hand) have special processing for scalaragg with max() as it does the backwards scan if max() is the only aggregate....if you do select min(), max() - then it does a forward scan even with scalaragg.   If you have just min(), we do a forward scan and short circuit after first row (as if select top 1)....

Charge overheats if Google Map is used while the phone is being charged.

I've encountered a strange problem:
The Charge does NOT overheat when using Google Maps on battery power.
The Charge does NOT overheat when being charged(either via AC adapter at home or DC adapter in car),
if Google Maps isn't open.
When Google Maps is open(GPS on) and the Charge is being charged, then the phone overheats and
shuts itself off after a warning message appears.
Verizon replaced the battery 3 times with brand new Samsung batteries. The phone was hard reset each time.
I ended up trying it on the Verizon corporate store's Charge on display. Turns out that the problem can be
reproduced in store.... Does anyone else have this problem?

I don't know why this problem has been marked "Solved". It is not solved.
I have the same problem when using Google Navigation in the Samsung car dock and the car charger. I started off with a fully charged battery because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger. About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did. I then had to contend with the screen going out because it was running on the battery.
I let the phone discharge to about 70% then tried the car charger again. Within a few minutes, I got the same overheating message. It was not an overly hot day and the car A/C was set at 68 degrees. THIS IS NOT ACCEPTABLE. I love this phone, but in the 3 days I've owned it, I've had one issue after another. Dropped Audio to other Verizon customers. Camera flash causing the phone to reboot. And now this issue. I hate to return it, but I'm running out of time.
Rich

Map goes backward while I go forward on the new Ov...

Similar Messages

Maybe you are looking for