MAP goes zero

Hello, I have an issue with consignment material.
Some times the MAP value in MM changes to zero, If I understand correctly MAP value only changes if we do GR.But since I have consignment PO and when we do GR there is no accounting document and no way to change the MAP.
Do you think the value changes when we consume consignment stcok?/?any idea why it has changed (checked change log in MM and no info on zero changed)

Check whethr the Consignment stock has to transferedr to your own company stock with T-code MB1B for Movement type 411K..........so might be the new MAP has been updated ....
After 411K the accounting entries will be
BSX) Stock A/c - Dr
(KON) Consignment Liabilities - Cr
And also check whether if any MPA has been updated through MR11.
BR,
Patil

Similar Messages

Moving average price (MAP) became Zero(0) for one material

Gurus,
Please tell me what could set MAP to zero for a material?
Thanks,
Kishore

HI,
Please check whether any body has transferred material from on location to another free of charge ot at the price 0.01,
as the MAP will be become zero by two reasons
1) any user have made the GR or Invoice for that material for at 0.01 price.In case of several invoices with too low a price the total value can reduce to such an extent that the MAP goes towards zero
2) or you may not have any stock in your location's.
please check the MB52 repost whether any body did for 0.01 price for that material , you can increase you MAP with Transactions MR21/MR22 ,increase the price/stock value again - if required.
Furthermore, you can define tolerance limits in the Customizing for the MAP price variance (Transaction OMC0, tolerance key VP) this is for your precautions in future.
PLease see the previosu forum post on MAP they might help you in your scenario.
Regards,
Ninad Kshirsagar

When is the iphone map going work with the newest IOS

Whe is the iphone map going work with the newest IOS?

Sorry. This question doesn't make sense. It works just fine for me right now. Maybe you'd like to explain what your problem is...

HT5429 When is google maps going to be available on ios 6?

When is google maps going to be available on ios 6? Or is there a way to go back to ios 5.x?

Whenever Google decides to release it there. You could try asking them if they have a date. However, most companies don't give out that information ahead of time.

Mapping - leading zeros

Hello all,
I have the mapping program with simple UDF written to pad the number with ZEROS. it is working good on the test mode, but at runtime it is not working, I am not getting leading zeros.
When I check my Input payload, I see leading zeros in the field. But not seeing leading zeros in the target file even after using UDF.
Scenario is from ECC proxy to File, field is defined as string in the data type.
Any help is appreciated.
thanks..Hari

Hari Potti wrote:Hari,
>
> When I check my Input payload, I see leading zeros in the field. But not seeing leading zeros in the target file even after using UDF.
I couldn't understand from the above statement. Actually the leading zeros will be padded only after the Message Mapping Pipeline , how come u able to see in Input Payload?
Can u please check the payload under Inbound Message, then check the payload under Request Message Mapping node. Reply back ur findings.
raj.

HCI Mapping leading Zeros

Hi,
I am mapping product_ID field from CRM IDoc to ReceiverID field in Cloud for customer web service field. ReceiverID is 40 character long field.
Product_ID field is 7 to 10 characters long. I would like to append leading zeros using HCI function.
HCI function Concat accept two static parameters index and count. I cannot append zeroes depending upon product_ID length dynamically. Is there any way I could do this mapping using HCI functions ?
Thanks & Regards,
Shrikant Kamble

Hello Shrikant,
Why don't you add number of zeros to the start of Product ID first and then use only the 10 characters from right end?
Example: Product ID: 101, lets say we are adding 10 zeros, so the Concat 10 zeros, this will make the Product ID as 0000000000101. Then use Substring to pick on the required length string. (Note that I am just considering reqd length as 10, you can use as per your requirement).
Hope this helps.
Regards,
Chandan

Google Maps going crazy and allignment problem

Help - I have got a site - www.elitepolefitness.co.uk which I have uploaded with Fetch (I have my own hosting) the embedded Google map is going crazy and the address is dark grey and left alligned instead of light grey and centered. When I upload the files to Fetch and preview site through there, its perfect. Please help!

Problem solved - I moved the files to different place - onto my Mac HD rather than my external HD. This is a massive pain though, I don't want to store all my websites on my Mac HD. Please try and fix this problem soon.
Could you advise on the next update/new features?
Thanks for your help - much appreciated.
Michelle

N82 maps goes on standby

I've tried using my N82 as a GPS, but after a few seconds without pressing any of the phone's buttons, it goes into standby, and I can't see the map!
Solved!
Go to Solution.

Try (in Maps 2.0): Options > Tools > Settings > Navigation > Backlight > Always on

Update COGS, if MAP is Zero

Dear All,
MAP of Material (MM03-> Accounting View) is Zero, for which you have created the Sales Order. If the price is Zero, we passing weighted avg price to VPRS condition type in sales order using pricing routine( business requirement)but at the time of PGI, system is not generating any accounting document i.e. (COGS).
Please suggests, how to update the COGS in this case.
Regards,
Nagesh N

Hi,
Cost Center is already mapped.
If moving avg price in zero, accounting document will not generate, this is the Standard behavior of the system. My scenario is, I have manually calculated MAP is available. But when do PGI, how to map calculated moving avg price, so that accounting document will get generate.
Please suggest.
Regards,
Nagesh

Maps goes online even though it's set not to

I noticed that whenever I open Maps on my N85, a data transfer occurs, which can be seen from the 3G icon turning into the 3.5G icon with the arrows underneath, as well as from the "Mobile Internet" Log entry created afterwards.
Why this is strange is because I have set Maps to never go online, AND I have unchecked the A-GPS method of positioning from Settings|Positioning|Positioning methods. I would have thought, therefore, that Maps will not go online when it starts - which it does. This is particularly inconvenient because I am currently abroad (i.e. mobile data transfers are expensive) and using the GPS quite often; the data transfers have summed up to a few hundred KB already, and I'd rather they did not continue this way. Can anyone help?
Solved!
Go to Solution.

In addition to unchecking AGPS in positioning methods, you have to go to Positioning Server -> Positioning Server Use and set that to "Disabled" (this is where you normally specify what AGPS server to use). Otherwise it will, for some strange reason, still try to use the AGPS server.
See there's this thing called "software testing" that Nokia doesn't really believe in.
Ravi

Policy-map going into suspended mode over a GRE

Hi
I have a GRE tunnel over another GRE tunnel. When I apply a nested policy on the Child GRE the policy map does not attach, what is the cause. The sho policy-map int Tux/x showed that it is suspended I am not making a breakthrough here. The hard ware platform is ASR 1001
Thanks
Don

Download RecBoot. You can kick it out of recovery mode with that. You may have an underlying issue though causing that. A restore may be in order.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

IMovie '09 Maps going totally blank!

What would cause this?
My iMovie globes are showing up... COMPLETELY BLANK WHITE!
Wha? Flat maps are blank black.
Even old projects that had globes in them are failing to reopen with maps intact.
The movement from city to city, and overlaying line all work.
What to do?

I guess this hasn't shown up on other iMovie '09 users. The only thing that helped was to revert to an earlier version of iMovie '09 and never upgrade.
Which begs another question: on a machine that has two copies of Snow Leopard on two different bootable disks, why does one work smoothly with iMovie '09, 8.0.5 while the other absolutely refuses to load it, and can only work with iMovie '09 8.0 (717).
The failing SL has been replaced ( no change ) then brought up to the latest update ( no change ) and reloads + reupdates of iMovie '09 have been tried along with numerous other things like Repair Disk Permissions, etc.
What could the OS possibly be doing? I've zapped PRAMs and everything I try does no good.

Map goes backward while I go forward on the new Ov...

Hi, everybody.
It seems that another guy also noticed this phenomenon. And I'm glad. I'm not alone.
In first hand, I thought it was a tecnical failure, GPS broken.. and it causes me a little anxiety and headache.
Why is it not possible anyway to have the maps following the direction ?
The most bizarre thing is when i go forward and the maps show a backward advancement following the north pole.
Yes, indeed it is set on direction mode when i put the final destination.. but once i know the road, I don't need anymore to put the destination..
Now i cannot see the road that will be next and prevail me against accident or something else.
I used the 5800 navigation edition during a month without putting any destination. I had the liberty to ride my next road.
Now, it is impossible.
You must put this again.. It is such important.
Thank you for your attention.
Alex.

I'm not trying to be critical but It is really difficult to read your post without punctuation.
If your battery is draining too quickly, read this for some tips on how to get the most of the iPad battery.
http://www.apple.com/batteries/ipad.html

When is Google Maps going to be available in the Philippine?

google maps is still not available here in the philippines!

Whenever Google decides to release it there. You could try asking them if they have a date. However, most companies don't give out that information ahead of time.

MAP has become zero

HI,
The MAP of a material has become Zero after 601 movt type. even though stock has become zero, th MAP should not become Zero. But here the MAP in MMR is showing 0. can any one tell me how to track the reason. I have tried the posts in SDN but none worked. I couldnot trace where it is going wrong. can any one please suggest /guide on this matter.
Your help is highly appreciated.
Thanks in advance
GP

Din@Das wrote:
MAP is nothing but division of total price and Total stock quatity.If there is no stock ,then MAP is Zero,
> i.e there is no meaning of MAP.
in general right, but not in case of zero quantity, as this would be a division by zero, which would result in a dump instead of zero MAP.
the MAP does not go to zero if all stock is issued, it just remains with the last MAP.

MAP goes zero

Similar Messages

Maybe you are looking for