Map LDAP/eDir "Language" and Vibe "Locale" attributes ?

Hello,
We can map a lot of LDAP/eDir user attributes with the Novell Vibe user attributes.
Now, I would like to know if it is possible to map the "language" attributes ?
The idea is to get the user "language" attribute from eDir and, based on it, to configure the Vibe "Locale" attribute ....
Tx for your help ...
Stephan

spauwels,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

How to map LDAP user language to portal user language?

Hi guys,
I need to get the logon language of our portal users from LDAP. I tried to modify the xml datasourceconfiguration file adding the "language" attribute, without any result. Anyone have some ideas?
I think this is a strange behaviour because I tried to add or remove other attributes such as "mobile", "telephone", ecc... and the system works without troubles adding or removing these attributes.

Hi Raffaele,
Pl refer to following link
http://help.sap.com/saphelp_nw04/helpdata/en/48/d1d13f7fb44c21e10000000a1550b0/content.htm .
Hope this might be useful.
Rgds,
Vivek
P.S: Award Points if you find this useful.

Multi-Message-split with ABAP mapping and adapter specific attributes

Hi all,
With ABAP-Mapping I split 1 message to n messages.
So many files are generated in file-Adapter.
Everything fine.
But now I want the file names different using adapter specific attributes.
It is not possible to use variable substitution and write the file name in payload because of receiver restrictions.
I tried this with following similar coding in ABAP-Mapping:
data: lt_records TYPE MPP_DYNAMIC_TAB.
 Loop.
 l_file_name = "payload-Inbound"-information
 ls_record-namespace = 'http://sap.com/xi/XI/System/File'.
 ls_record-name = 'FileName'.
 ls_record-value = l_file_name. "l_file_name comes from inbound-payload
 append ls_record to lt_records.
 Endloop.
CALL METHOD dynamic_configuration->set_all_records
 EXPORTING
 records = lt_records.
If I start the interface I see in the monitoring the dynamic configuration with many entries for file-name in the the SOAP-Header mapping of the request message (following extract):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPAADDRESS.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPABROKERROLE.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACOMPANYSEGMENT.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACUSTOMERROLE.XML</SAP:Record>
The result is that all files have the same file name (last entry in dynamic configuration).
Is it possible to write the adapter specific configuration in ABAP-mapping for every single result message??
Thank you for your help,
Florian

Hi Florian,
I've a different idea...I dont think its a "right solution" but just another work around..it involves a BPM...
In your ABAP mapping..set the dynamic config with as many variables as number of different messages...i.e. use the variables like 'FileName1', 'FileName2'...'FileName6' instead of 'FileName'. But use the same namespace 'http://sap.com/xi/XI/System/File'
Call the above mapping in a BPM and capture the individual messages and set the attribute 'FileName' from the values of 'FileName1' to 'FileName6' accordingly using Message Mapping and then send the message using the 'Send' step.
before you try this, try using the variable names 'FileName1' ...'FileName6' in the receiver adapters...enable the ASMS. I know we need to select which variables from the dynamic config to be used by the adapter by specifically selecting 'FileName', 'Directory' etc...but just give it a try and see if it works..
Or..instead of using a BPM..you can combine Henrique's idea...use Adapter module to set the value for 'FileName' from variables 'FileName1'...'FileName6' accordingly.
hope I'm clear..lemme know if you have any questions..
cheers
praveen

HT4528 My wife had a problem with her iPhone 5C with no voice on th Maps app. I visited my local Apple store and they said the problem was in iCloud. We did a new install and it works great now. Now my iPhone 5 has the same problem.

My wife had a problem with her iPhone 5C with no voice on the Maps app. I visited my local Apple store and they said the problem was in iCloud. We did a new install and it works great now. Now 4 days later my iPhone 5 that is tied to the same iCloud has the same problem with the Maps app. I really don't want to go through a new set-up with my iPhone 5. What's going on with iCloud?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

URLScraper and French Locale

I'm trying to set up a multilingual portal at the company (fr & en more may follow). I can't figure out how the URLscraper would handle french. I noticed that there is a separate .properties file for french titles, etc. but how can the scraper sling french content rather than english content to the user based on language preference?
Do we have to:
1. create a separate role and/or scraper for french and english?
2. Make sure the content is bilingual?
3. Scrape a custom JSP provider that reads the local attribute and serves content in the appropriate language?
4. Other?
Your input would be greatly appreciated.
Thanks & Cheers,
-Dug

The problem is portal does not support localization per channel, hence there is really no configuration you can do to acheive that. Looking at the options you have listed.
1.) This is possible if the user would always see content only for his local if that is the case then you can create seperate channels for your locales then put users in seperate roles based on the locales serve appropriate content.
3.) you can write a jsp to scrape the content yourself. THe jsp can display the content based on the local selected for the user. This is the most general option of the 3 and probably the most flexible for you ..

Local attributes - global attributes tradeoff

Hi, MDM experts.
Can you, please, share your experience on business partners repository modeling.
I build custom business partners repository. While creating it I came to a question - whether local system attributes of business partner should be modelled in that repository?
Intrinsic attributes like Full Name, State Identity Number and so on should be definitely modeled. Attributes specific to our organization but those that span many of our systems should also be modeled I think.
But what's about some specific attributes that are relevant only for one of the systems being integrated? To be concrete, imagine we have SAP ERP system as one of the systems in landscape and such attribute of our business partner as 'Purchasing organization'. In our case this table is SAP ERP specific and none of our other systems have such entity in their data model.
The question is - is it reasonable to have local system attributes and lookup tables implemented in central MDM repository?
If yes then isn't our repository going to be overloaded with all that local attributes and lookup tables of every client system?
If no, then how should process of central creation of business partner look like? The problem is in this case Creator won't be be able to assign all attributes he would like to and he will have to login to each of local system and assign these values after central creation. Moreover, client systems can refuse to create new record automatically in case some of attributes are missing. For example such situation is typical for Idoc inbound processing .
Have you any suggestions on streamlining the data model and BP central creation process ?
Regards,
Vadim Kalabin

Hi vadim,
These are my thoughts on your issue.
I feel both the attributes should find place in the same repository.
This is not going to overload the system. In some typical MDM Implementation the volume of Main table records will very huge and the Local and global attributes will only occupy a less share only on the total records.
Also the practice is that MDM DB Server and the core server runs separately.
Pl find if this Article is use for you.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d8aa53-b11d-2a10-aca2-ff2bd42a8692">MDM Data modelling do's and dont's</a>
Regards,
Vijay

Help! .TMIB service not returning local attributes

I've the following src to create a an FML request buffer with TA_FLAGS set to MIB_LOCAL...
FBFR32* buf = (FBFR32*)tpalloc("FML32", NULL, 1024);
Finit32(buf, Fsizeof32(buf));
long flags = MIB_LOCAL;
Fchg32(buf, TA_OPERATION, 0, "GET", 0);
Fchg32(buf, TA_CLASS, 0, "T_QUEUE", 0);
Fchg32(buf, TA_FLAGS, 0, (char*)&flags, 0);
Fchg32(buf, TA_RQADDR, 0, qaddr, 0);
FILE* f = fopen(dumpfile, "a");
Ffprint32(buf, f);
long len;
tpcall(".TMIB", (char*)buf, (long)0, (char**)&buf, &len, 0);
Ffprint32(buf, f);
fclose(f);
Which produces the following output in the dumpfile...
TA_FLAGS 65536
TA_CLASS T_QUEUE
TA_OPERATION GET
TA_RQADDR LMQ
TA_ERROR 0
TA_MORE 0
TA_OCCURS 1
TA_GRACE 60
TA_MAXGEN 3
TA_MSG_CBYTES 0
TA_MSG_QBYTES 65536
TA_MSG_QNUM 0
TA_RQID 52527126
TA_SERVERCNT 1
TA_WKQUEUED 0
TA_CLASS T_QUEUE
TA_STATE ACTIVE
TA_CONV N
TA_RCMD
TA_RESTART Y
TA_RQADDR LMQ
TA_SERVERNAME <ommitted>
TA_SOURCE <ommitted>
TA_LMID slc00caq
Note the lack of local attributes. I have analogous src to query local attrs of the T_SERVER class which works fine. Any ideas on why I'm not getting T_QUEUE local attrs?

Michael,
The local attributes in the T_QUEUE class aer TA_TOTNQUEUED, TA_TOTWKQUEUED, TA_SOURCE, TA_NQUEUED, and TA_WKQUEUED.
TA_WKQUEUED and TA_SOURCE are being returned as part of the result.
For TA_TOTNQUEUED the TM_MIB(5) manual page T_QUEUE class definition lists the following limitation:
Limitation: If the T_DOMAIN:TA_LDBAL attribute is "N" or the T_DOMAIN:TA_MODEL attribute is "MP", TA_TOTNQUEUED is not returned. In the same configuration, updates to this attribute are ignored. Consequently, when this attribute is returned TA_LMID and TA_SOURCE have the same value.
There is a similar limitation listed for TA_TOTWKQUEUED and TA_NQUEUED. That is why you are not seeing those 3 attributes in the result.
Regards,
Ed

Local Attributes of the T_SERVER Class

What's the secret to getting the attributes listed as "local" in the MIB doc? I have some simple code to do GETs and then dump the contents of the receive buffer. Everything works nicely except I can't seem to get any of the "local" T_SERVER Attributes. I have tried setting the MIB_LOCAL flag. I have tried specifying the local attributes in a filter. All to no avail.
This snippet...
FBFR32* fmlbuf;
if ((fmlbuf = (FBFR32*)tpalloc("FML32", NULL, 10000)) == NULL)
cerr<<"ERROR: mibget: tpalloc: "<<tpstrerror(tperrno)<<endl;
return;
if (Finit32(fmlbuf, Fsizeof32(fmlbuf)) == -1)
cerr<<"ERROR: mibget: Finit32: "<<Fstrerror32(Ferror32)<<endl;
tpfree((char*)fmlbuf);
return;
Fchg32(fmlbuf, TA_OPERATION, 0, "GET", 0);
Fchg32(fmlbuf , TA_FLAGS, 0, (char*)MIB_LOCAL, 0);
Fchg32(fmlbuf, TA_CLASS, 0, (char*)tclass.c_str(), 0);
long len = -1;
if (tpcall(".TMIB", (char*)fmlbuf, (long)0, (char**)&fmlbuf, (long*)&len, (long)0) == -1)
cerr<<"ERROR: "<<tclass.c_str()<<": tpcall: Error "<<tperrno<<" "<<tpstrerror(tperrno)<<endl;
tpfree((char*)fmlbuf);
return;
string path = "c:\\temp\\";
path.append(tclass);
path.append(".log");
FILE* f = fopen(path.c_str(), "a");
Ffprint32(fmlbuf, f);
fclose(f);
tpfree((char*)fmlbuf);
Prints the following 38 fields for each server occurrence when tclass=T_SERVER...
TA_BASESRVID 1
TA_GRPNO 30002
TA_MAX 1
TA_MAXGEN 0
TA_MIN 1
TA_PID 6256
TA_RPID 1537
TA_RPPERM 432
TA_RQID 1537
TA_RQPERM 432
TA_SEQUENCE 0
TA_TIMERESTART 1322356429
TA_TIMESTART 1322356429
TA_MINDISPATCHTHREADS 0
TA_THREADSTACKSIZE 0
TA_MAXQUEUELEN -1
TA_SRVID 0
TA_MAXEJBCACHE 0
TA_EJBCACHE_FLUSH 0
TA_CLASS T_SERVER
TA_STATE ACTIVE
TA_CLOPT
TA_CONV N
TA_ENVFILE
TA_RCMD
TA_REPLYQ N
TA_RESTART Y
TA_RQADDR 43349
TA_SERVERNAME c:\\Oracle\\tuxedo11gR1_VS2010\\bin\\BBL.exe
TA_SYSTEM_ACCESS FASTPATH
TA_SEC_PRINCIPAL_NAME
TA_SEC_PRINCIPAL_LOCATION
TA_SEC_PRINCIPAL_PASSVAR
TA_SICACHEENTRIESMAX 0
TA_LMID SLC00FDG
TA_SRVGRP
TA_SRVTYPE
TA_CONCURR_STRATEGY
Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level (none) running on Microsoft Windows Server 2008 R2 Enterprise 6.1.7601 Service Pack 1 Build 7601.
What am I missing?

Answering my own post. What I was missing was the '&' in front of MIB_LOCAL. Chalk that one up to a stupid typo.

Group Policy won't apply, No mapping between account names and security IDs was done.

I am using Group Policy Preferences to remove users from the local admin group and add a local admin account. This GPO is working on 90% of the Win7 machines on the network, but three laptops are not accepting the GPO. I get the following error:
Log Name: Application
Source: Group Policy Local Users and Groups
Date: 6/24/2014 8:49:28 AM
Event ID: 4098
Task Category: (2)
Level: Warning
Keywords: Classic
User: SYSTEM
Computer: laptop1.internal.com
Description:
The user 'Administrators' preference item in the 'Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}' Group Policy object did not apply because it failed with error code '0x80070534 No mapping between account names and security
IDs was done.' This error was suppressed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Group Policy Local Users and Groups" />
 <EventID Qualifiers="34305">4098</EventID>
 <Level>3</Level>
 <Task>2</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-06-24T13:49:28.000000000Z" />
 <EventRecordID>68771</EventRecordID>
 <Channel>Application</Channel>
 <Computer>laptop1.internal.com</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data>user</Data>
 <Data>Administrators</Data>
 <Data>Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}</Data>
 <Data>0x80070534 No mapping between account names and security IDs was done.</Data>
</EventData>
</Event>
I've searched high and low for an answer and nothing I find on-line seems to apply. I also notice that the option to 'Run as Administrator' does not work. If I right-click on cmd.exe and select 'run as administrator', the command box opens but
I am not prompted for credentials and the command box does not have admin rights. Not sure if this is related or not.
Any help on this would be greatly appreciated.
Thanks,
Joe

Hi,
Delete your remove action from the GPP and push it again, does this issue still occur?
If it still exists, let’s collect the GPP log for analysis:
Group policy Preference debug logging policy settings are located under:
Computer Configuration\Administrative Templates\System\Group Policy
Click Logging and tracing, select local users and group preference logging and trace.
Meanwhile, just a similar issue, but it is worth trying:
A user is added to the wrong group on a client computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2280515
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Mapping LDAP Groups to SAP Roles

Hi there,
i am trying to build up a synchron usermanagement with a LDAP-Server between EP, Web AS Java and Web AS ABAP.
My thought is to administrate the users in the LDAP-Directory. The users will be assigned to groups.
In EP and Web AS Java its no problem to assign these groups to roles and then just change the Users in the LDAP-Group and reach a synchron usermanagement.
In Web AS ABAP it seems impossible to assign roles to groups.
The question is, is it possible to map ldap groups with the ldap connector of the web AS ABAP to Roles in an ABAP System?
Or is there another way to administrate users in different systems?
Thanks alot for your answers,
stefan

Hi
in this case u have to use the concept of central user administration. use the following links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/asug-biti-03/cua with sap webas, ldap and third party software
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-04/user management and authorizations overview.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/dotnet/integration of sap central user administration into microsoft active directory.pdf
hope this helps u to get fair bit of idea
don,t forget to give points
With regards
subrato kundu

Is it possible to download a PDF of "ActionScript 3.0 Language and Components Reference"?

I have found the "ActionScript 3.0 Language and Components Reference" online fine but my Internet is sometimes slow and I would like to take the reference with me even when I am not connected to the Internet. Is there a way to download a PDF version of this reference and if so, how? Help would be very much appreciated. Thanks

The second item in the listing, ActionScript 3.0 Reference for the Adobe Flash Platform (ZIP, 66 MB) is a standalone copy of the files that you are looking for.
Here's an Adobe Community file on how to implement the local help: http://forums.adobe.com/thread/1000134

HT5048 Hi, 1.34 is too much for me ... can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?

Hi,
1.34 GB is too much for me to download ...
Can I deselect Catalan, Croatian, Greek, Hebrew, Romanian, Slovak, Thai, and Ukrainian languages and download only the OS with less GB?
I tried several times but not successfull ...
please help me to update my OS.
thanks

Are you asking why those non-ASCII characters are printing incorrectly? It's because the console is still treating the output as ASCII. The JVM is encoding each character as two bytes according to the UTF-8 spec, but the console is treating each byte as a separate, ASCII-encoded character. Changing the locale of the OS or the "file.encoding" property of the JVM doesn't affect the behavior of the console.
When I run your code on my WinXP machine (leaving "file.encoding" at its default setting), I get this output: // __ System.getProperty("file.encoding"): |Cp1252|
// __ |en_US|
// __ |225|�|
// __ |233|Θ|
// __ |237|φ|
// __ |243|≤|
// __ |250|�|
// __ |252|ⁿ|
// __ |241|�|
// __ |191|┐|
// __ |161|�|
// __ |251|√|
// __ |224|α|
// __ |223|▀|
// __ |232|Φ|
// __ |235|δ| The JVM is outputting the text as cp1252, but the console is treating it as cp437, its default codepage (encoding). When I change the console's encoding with the command "CHCP 1252" and run the code again, I get: // __ System.getProperty("file.encoding"): |Cp1252|
// __ |en_US|
// __ |225|�|
// __ |233|�|
// __ |237|�|
// __ |243|�|
// __ |250|�|
// __ |252|�|
// __ |241|�|
// __ |191|�|
// __ |161|�|
// __ |251|�|
// __ |224|�|
// __ |223|�|
// __ |232|�|
// __ |235|�| I don't know if it's possible to change the encoding of the console in your OS, but that's not a showstopper. Just write the output to a file, then use a reasonably capable text editor to view the result. And there's no need to change all those OS/JVM settings; just specify the encoding when you open the file for writing: FileOutputStream fos = new FileOutputStream("out.txt");
OutputStreamWriter osw = new OutputStreamWriter(fos, "UTF-8");

Basic question: Can OID map LDAP query to custom SQL query?

Hi all,
I have custom data in my Oracle Database and I wat to give them
LDAP interface. Is it possible to use OID to achieve this or OID
is for other purposes?
To be more specific: I have schema MYSCHEMA and table
MYSCHEMA.MYTABLE. Is it possible to configure OID to select from MYSCHEMA.MYTABLE for specific LDAP queries? And the same for update queries? Is there some OID manager console to map LDAP queries against Oracle tables and views?
Thanx for any suggestions,
Rob

Rob,
take a look at the Directory Integration Platform. We provide synchronization of data from an DB tables to OID.
see "Synchronization with Relational Database Tables" http://download-west.oracle.com/docs/cd/B14099_14/idmanage.1012/b14085/odip_db.htm#i1042820
another option could be to use the OID Plugin framework together with a PLSQL procedure to access the DB data
http://download-west.oracle.com/docs/cd/B14099_14/idmanage.1012/b14087/svrplgin.htm#i741028
regards,
--Olaf

Can ldap take in an array of attributes.

Can ldap take in an array of attributes. For instance if a person is a Manager of various stores.
And we want him to be able to view the records of all the stores. So we want to be able to add the
stores as an array of attributes is that possible.

Hi,
what about making the departments entries in LDAP and relate them to the manager. This way they are searchable
Frank

Can esb DVM(Domain-value mapping ) support multi-language ?

I create a dvm , and add some rows in Chinese , but when I restart the soa service , all the DVM that I created disappeared.
Can esb DVM(Domain-value mapping ) support multi-language ?
Edited by: user10732687 on 2009-8-23 下午7:39

DVM is designed to use in English only and not intended to support Multi language. It is the job of consumer application to convert from English to native language(Chinese in your case).
Thanks,
Vamsee.

Map LDAP/eDir "Language" and Vibe "Locale" attributes ?

Similar Messages

Maybe you are looking for