Map loader installation problem

i am using nokia 5230 and i have tried the Maps app twice (succeeded times)
i downloaded the Ovi Maps, which then made my Maps app have a new interface in blue
basically i spend most of the other time mourning about how it doesnt work -.-
since i dont know how to uninstall the Ovi Maps version, so i called Nokia up and they told me to try download the Map Loader and download the new files again
the Map Loader is in a .zip file
but after i unzipped it there is no .exe files or sthg to let me INSTALL it
the nearest thing i get is a file in 'MacOS' called Nokia Map Loader 4.31 MB
even if i change it to .exe i cant do anything?? is this even the right thing??
can somebody please help?
cheers.
Solved!
Go to Solution.

gigiwong3b wrote:
i am using nokia 5230 and i have tried the Maps app twice (succeeded times)
i downloaded the Ovi Maps, which then made my Maps app have a new interface in blue
basically i spend most of the other time mourning about how it doesnt work -.-
Can you be more specific when you said it "doesn't work"?
Map Loader (if you need it)
http://nds1.nokia.com/files/support/global/phones/software/NokiaMaploaderSetup_ENU.exe
Good luck.

Similar Messages

Problem in finding and downloading Map Loader

Hello, i am using N97 mini, i updated the map to OVI free navigation map,
but i want to use the navigation without internet conncetion and for that i need to download the map and save it into my device.
But the problem is i cant find the correct link for Map Loader, please suggest and advice,
Please check the url befor suggesting it to me because i tried many URLs non are working for downloading MAP LOADER!
i have downloaded OVI Store & PC Suite software, but cant find the MAP LOADER software...
Thanks and regards,,,
Talal Baig
Solved!
Go to Solution.

If you have Ovi Suite, you dont need map loader. You can even install PC Suite. Its unadvisable to have them both on the PC
Connect your device to your PC and Ovi Suite. Right click on the bottom where it says connect new device. Follow the prompts. Then select View>Go to>Maps. Select the maps and voice you want to download.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Map Loader Problem

Hello everybody.
I installed maps 3.0 beta on my N95. I used map loader to download new map and voices data yesterday.
Everything worked, I used navigation in my car and maps 3 looks very good.
But today, I wanted to change the voice for navigation to english, so I started up Maploader (I know I know, I can change the language directly on my phone, that's not the problem)
Only the beginning screen of map loader (version 3) is showing - the application does not go further than that screen.
I restarted my phone, restarted my laptop but nothing changes...
Can anyone help me... as i want to install new maps on my n96 too...
thanks!

you might need to reinstall the software compnents on your computer and try again
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

"WAITING FOR DEVICE" problem for Map Loader 2.0.2

i'm sure many have had that problem, but doing a search on topics doesn't seem to produce an answer. if you have resolved that issue please post again your solution here
Thanks
Solved!
Go to Solution.

Open Nokia Map application, go online whether through through your wireless network if your phone is equipped with or through your ordinary 3G or paid internet connection, downloading of very small amount of Data as about 300 KB is enough to "stamp" your memory card with identification file called QF file then the the solution is simply the following:
If your phone is hacked or you are able to access the following on your memory card:
(Memory Card drive):\private\20001f63\diskcache
copy the file named QF from the above folder and install it on the root of your memory drive.
The excute Map loader (doesn't make difference whether PC suite or Data transfer) it will be identified and then you can download whatever Map you want.

Map loader/ software updater problems

I have had my N95 for about 2 weeks and have spent hours trying to get gps to work. I have just been following someones instructions on another thread but fell at the first hurdle. Nokia recommends that I install Nokia maps up date prior to installing map loader, then map loader recommends I download and install nokia sofware updater. Problem there is I get an error message half way through saying minimum requirement is 256mb memory. I have loads of memory so I don't understand why this is happening.
Can anyone help? You will need to keep it simple!!

Hi,
But the problem is in RAM memory of Your PC not in this on Your Hard Disk Drive (59,95GB). This memory is mounted on motherboard of your PC. Check inner configuration. Control panel - system. If it's lower then 256MB, you have to buy another block of RAM. And how big is your SD card. Besides nokia map loader doesn't work now. See the topics below yours. Some problem with software update version 20. Maybe if you didn't updated older v.12 soft. it should go.
N95 & N96 User

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

N82 problems wih map loader.

I'm trying to use the map loader on an N82. I connect the USB, select "Data transfer" on the phone, and then on the PC run the map loader.
At this point I get "No storage medium detected" error message, and the phone flashes "Unable to activate data transfer mode. Data card is in use by another application".
I've exited the media player, and can't think of what else could be using the card (yes, there is a card plugged in).
Anyone else experience this? I had no such hassle with an N73 (lots of other hassle, but not specifically this one)

Is this the link you used?
http://europe.nokia.com/A4984199
I just tried it and it's fine.

Nokia Map Loader problem !!!!!!!

when I open Nokia Map Loader he say truffle on pic
http://up5.m5zn.com/photos/00234/f5e4xadczwqc.jpg

29-Sep-2008 11:46 AM
abdallah_48 wrote:
I am instal N Series pc suite and I update
If you want Nokia Maploader v2.0.2 to work then you will need to uninstall "N" Series PC Suite unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Problem downloading Maps application and map loade...

I have the maps 2.0 app running fine on my E90 but wanted today to download the latest and also the map loader to save some data costs.
When I try I get the EULA screen but the only option I get is to close it, am I doing something wrong?
Thanks
BigBen

Ok so now the map loader is downloading but still not maps application ........
Is there like maintenance or updating that takes place and temporary unavailaibility or something?

Error when start Map Loader

I found Error message, and asked me to start the application again, every time I start Map Loader version 1.2 (latest).
I installed, and was asked to install also NET Framework 3.0.
Some people said the error casued by NET Framedwork, but I could not run Map Loader without it.
I tried reformat my E61i and its memory card, but the problem occured the same.
Anyone facing the same problem? Any recommended solution?
Thank you for your help in advance!

You might not be able to download the .net framework 3.0 correctly using the installer for maps loader. Try this:
Download and install the .net framework 3.0 from this location ---> http://download.microsoft.com/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
Then try to install the Maps loader again, this time it will not ask you to install the .net framework.
~ the lost viking ~

Map Loader Bug Re. Lost Internet Connection

Don't really know how to alert the programmers behind the Map Loader software to a fairly major software bug.
If the internet connection is - even very briefly - interrupted for even a second, the Map Loader software gives an error message.
BUT - big problem - the map selection CLEARS so you can't resume from where you left. Nor can you see which maps had successfully downloaded while the connection was active, so you have to download the WHOLE list again.
Please update for the next release.

D-Park,
Welcome to the HP Forum.
If you were using MAC filtering on your router, you would know how to fix this. If you do not know what it is, you do have have MAC filtering enabled on the router -- or you are not the router administrator. So -- don't worry about MAC filtering or go find the router administrator and ask to be let in (you will need the MAC address of the printer -- get a print out of the network page from the printer).
===========================================================================
Loss of network connection
Ordinarily I would suggest you reinstall the Full Feature Software for the printer because the installation can resolve a variety of ills associated with a disconnected wireless printer.
Install Full Feature Software - Printer
You did say the printer lost Internet connection -- this is a bit different from losing connection from your home network. You seem to be implying that your printer has lost its ePrint connection without actually saying you have lost ePrint.
The following document can help with both a disconnected wireless printer that is not cooperating -- even after you have tried reinstalling the Full Feature Software, for example -- and the document has a link to the ePrint Help and Tips documents that might help you if the issue is just one of ePrint and an Internet connection having to do with the printer and its connection to that service.
Wireless Printing Center
Take a look around at the sections -- you might start at the Troubleshooting steps and see what jumps out at you -- you might find your "issue" is right there and you can find the steps to fix it right away.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

N73m and Map Loader

I am trying to load Maps onto my N73 using map loader program. The only major problem i am having is when it goes to verify my storage medium after downloading. the map loader program then tells me that the connection was interrupted and i should reconnect my card or phone again ?? It's very frustrating, i've uninstalled Nokia Maps and Map Installer hoping to fix problem.'
Any questions please post them, BUT some help would be great.

if im unable to find the control centre in my add or remove programs, does tt means it is nt install? if it is, den y do i still get the problems frm it... anyone can help mi? thx..
pics to show the prob..
http://i7.photobucket.com/albums/y295/edge_2723/asd-4.jpg

N96 Nokia Maps Loader Issue

Hi All,
I just updated my phone firmware.
I make it a habit to format the mass memory and the phone memory.
The problem now is after I have restored all my files and recreated the settings, I cannot make the Maps to load.
I encounter this error message "Error while loading catalog to drive E: at Nokia N96"
The only option is to click the check mark, after I click it nothing happens.
Have anybody experienced this or anybody knows a solution?
I have already checked the cities folder and it is recreated already. But still same issue.
Is this related to the new firmware?
Solved!
Go to Solution.

I have managed to solve it.
When you format the phone memory the license manager which is used by Nokia Maps gets deleted.
In order to get it back you have to download the Nokia Map for your country and install it again to the phone.
After the installation. Delete the cities folder if there is one and then run the Nokia Map.
You can now use the Map loader and install the language you want.
That means that the maps loader is useless if you have deleted the license manager.

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- Neil

Hi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28080
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28443 (SSL)
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>-----

Map loader installation problem

Similar Messages

Maybe you are looking for