Map pearson email id with working Company Email ID
Hi,
I have taken the Oracle Certification exam using my personal email id. Is there any way to badge this with the Company Email ID . So that it should display in Specialzaion status.
Thanks
Your post doesn't provide sufficient details for me to be positive what your situation is. I'll provide some background and then make some suggestions.
There are two accounts, your Pearson Vue account and your OTN account.
You take the test under the Pearson Vue account, but link to your Oracle Partner Network company through the OTN account.
The Pearson Vue account and the OTN account are linked via your Oracle Testing ID.
First of all, both my Pearson View account and my OTN account are under a non-company ID. Despite that, I have badged my OTN account to my company. From this I know that it is not required that the OTN account use a company email.
Second, theoretically the Pearson Vue account and the OTN account could use different email addresses. I haven't tried this, but the two are linked by the testing ID rather than the email address, so I don't believe there is anything preventing this.
If one of the above doesn't resolve your problem, I need more details.
Similar Messages
-
I want to switch my Apple ID email address with my "rescue" email address, but it won't let me - how do I do it? Thanks
As far as I understand the way that it works, you won't be able to do this. You are trying to switch two email addresses that are already associated with your Apple ID and therefore, cannot be switched as such.
Each address is already in use, you so can't make the switch. If both email accounts are active and still work, why rock the boat anyway? -
You have now exceeded your iCloud storage, including an additional amount provided to allow you to continue receiving email. As a result, you will not be able to send or receive new email messages with your iCloud email address until you free up storage space or buy more storage. I have 20GB remaining. WHat is the issue here?
Today I received the same message but have 4.6gb available from a total of 5.0gb. I also received the same message when i first set up my icloud account and icloud was virtually empty. Unfortunately the only way i can see to contact apple is to pay for a telephone call. If anyone knows what is going on i would appreciate knowing.
-
I had connected my yahoo email account with my apple email and now wish to disconnect this link. How do I do this?
Open Mail preferences and delete the account. This only removes it from the Mail app and doesn't close out the service.
-
Using Mac email program with Web-based email
I'm wondering if there is a way to use the Mac email program with Web-based email (like Gmail, etc).
If this is possible then how can I set up my system.
Thanks much.Yes you can use gmail using Mail software.
Following is prosidure:
1)-Login to ur gmail A/s
- Go to settings click Forward POP Settings the click Enable POP and click Save.
2) open mail-POP settings
-Type your Email address, Password,
Incoming server:pop.gmail.com
SMTP server: smtp.gmail.com
Type and give the Bolded server in specified path
and follow the instruction. -
ICloud Calendar email invitations with my personal email domain
Hi,
I want to send the invitations of the calendar of iCloud with my work email, with the domain of my company @espero.it (and not with mail @me.com, @mac.com or @gmail.com).
I try to set my apple account just with this email address, but the invitations now send with the domain @mac.com and not with the email of my account... If I set the email address with @gmail.com it works...
why? can't I send with my domain??now it works: the invitations of calendar are send with my personal domain.
But there's another big problem: the invitations that I send to another user that have an email with my same domain ([email protected] to [email protected]) don't arrive, but are blocked by the mailserver, for security...
If in iCloud Calendar I could add the authenticatin-data of my email account, iCloud can send the invitations with authentication, and so my mail-server doesn't block!! -
RV180 Remote Logging Configuration - Email Setup With Google Apps Email
Hello,
Trying to setup email logs to be sent from a RV180 using Google Apps email. Have successfully set up email logs to be sent in both a UC320W, and an RV016, but the RV180 seems to be giving me some trouble.
Current RV180 Firmware: 1.0.1.9
Have tried the following settings:
EMail Logs: Enable
EMail Server Address: smtp.gmail.com (also tried ASPMX.L.GOOGLE.COM which seems to work for the RV016 surprisingly)
SMTP Port: Have tried 25, 587, and 465 with both Email server addresses
Return to EMail Address: My email address, also tried 2 alternate addresses
Send to Email: My email address, also tried an alternative address
Authentication with SMTP server: Login Plain
Username: Tried using the Return Email address account info
Password: Tried using the Return Email address account info
Will this feature work using Google Apps email? Any direction is greatly appreciated.
Thanks,
MattWrong forum, post in "small business - routers". You can move your post using the actions panel on the right.
-
Sending email - problems with text in email body
Hello all,
for sending emails I use the FM from Thomas Jung (<a href="http:///people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface:///people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface).
Everything works fine, except that the text I attach in documents-content_text doesn't appear as a normal text in the email body but within an .EXT-attachment. Should this be a TXT attachment?
E.g. when I send the text 'Hello World' the email arrives with an attachment 'Hello World.EXT'.
Did anyone have the same problem? What's wrong?
Thanks for your help.
Regards
JoschiTry this it works fine for me,
METHOD email_result_as_pdf.
DATA: lo_document_bcs TYPE REF TO cl_document_bcs VALUE IS INITIAL,
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL,
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL,
lo_cx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL,
lo_cx_send_req_bcs TYPE REF TO cx_send_req_bcs VALUE IS INITIAL,
lo_cx_address_bcs TYPE REF TO cx_address_bcs VALUE IS INITIAL.
DATA: li_message_body TYPE bcsy_text VALUE IS INITIAL,
li_att_content_text TYPE soli_tab,
lw_att_content_text TYPE soli.
DATA: lv_result TYPE string,
lv_send TYPE adr6-smtp_addr
VALUE '[email protected]',
lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
* Create Object
lo_send_request = cl_bcs=>create_persistent( ).
* Add Contents to Mail Body
APPEND 'Dear Sir,<BR>' TO li_message_body.
APPEND ' ' TO li_message_body.
APPEND 'Please find the Report contents enclosed.<BR>' TO li_message_body.
APPEND ' ' TO li_message_body.
APPEND 'Thank You,<BR>' TO li_message_body.
* Create a Document
TRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'HTM'
i_text = li_message_body
i_subject = 'New ALV Sample Report'
RECEIVING
result = lo_document_bcs.
CATCH cx_document_bcs INTO lo_cx_document_bcs.
lo_cx_document_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Populate the data to the Document Table
LOOP AT i_sbook INTO w_sbook.
CONCATENATE
w_sbook-carrid
w_sbook-connid
w_sbook-fldate
w_sbook-bookid
w_sbook-customid
w_sbook-custtype
w_sbook-smoker
w_sbook-wunit
w_sbook-invoice
w_sbook-class
w_sbook-forcurkey
w_sbook-loccurkey
w_sbook-order_date
w_sbook-counter
w_sbook-agencynum
w_sbook-cancelled
w_sbook-reserved
w_sbook-passname
w_sbook-passform
w_sbook-passbirth
INTO lw_att_content_text-line
SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
CONCATENATE cl_abap_char_utilities=>cr_lf lw_att_content_text-line
INTO lw_att_content_text-line.
APPEND lw_att_content_text TO li_att_content_text.
ENDLOOP.
** Add the attachment to the document
TRY.
CALL METHOD lo_document_bcs->add_attachment
EXPORTING
i_attachment_type = 'RAW'
i_attachment_subject = 'New ALV Sample Report'
i_att_content_text = li_att_content_text.
CATCH cx_document_bcs INTO lo_cx_document_bcs.
lo_cx_document_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Set the document to the Send Request
TRY.
CALL METHOD lo_send_request->set_document
EXPORTING
i_document = lo_document_bcs.
CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
lo_cx_send_req_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Create Sender
TRY.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = lv_send
RECEIVING
result = lo_sender.
CATCH cx_address_bcs INTO lo_cx_address_bcs.
lo_cx_address_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Add Sender to Mail
TRY.
CALL METHOD lo_send_request->set_sender
EXPORTING
i_sender = lo_sender.
CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
lo_cx_send_req_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Create Receipient
lv_send = '[email protected]'.
TRY.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = lv_send
RECEIVING
result = lo_recipient.
CATCH cx_address_bcs INTO lo_cx_address_bcs.
lo_cx_address_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Add Receipient to Mail
TRY.
CALL METHOD lo_send_request->add_recipient
EXPORTING
i_recipient = lo_recipient
i_express = 'X'.
CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
lo_cx_send_req_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Set Send Immediately
TRY.
CALL METHOD lo_send_request->set_send_immediately
EXPORTING
i_send_immediately = 'X'.
CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
lo_cx_send_req_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Send Mail
TRY.
CALL METHOD lo_send_request->send
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all.
COMMIT WORK.
CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
lo_cx_send_req_bcs->if_message~get_text(
RECEIVING
result = lv_result ).
MESSAGE lv_result TYPE 'E'.
ENDTRY.
* Inform User
IF lv_sent_to_all EQ 'X'.
COMMIT WORK AND WAIT.
MESSAGE 'Mail Sent Successfully' TYPE 'I'.
ELSE.
MESSAGE 'Error Sending Mail to External Id' TYPE 'E'.
ENDIF.
ENDMETHOD. "email_result_as_pdf
Regards
Kathirvel -
Email notification not working but email retreival...
Hi,
I'm thinking that email notification should simply tell you that you have a new email and that email retreival actually pulls the email from the server.
also does it cost to read your emails when on the move ?
thanks.Hi,
Just try one more alternative....
Create an anohter task just to send an email to the manger. The same thing you need in Notification tab for the new task as you done in approval task. Just add one more process task adapter under Integration which just completed automatically you can go "tcCompleteTask" as well in Integration tab of newly create task. Of you can refer the OIM LAB how to create a task just for notification.
As it is not working in in approval task might be because of response of the task.
Let me know if you have any query for the same.
Regards
Alabhya Goel -
HTML email bug (with one company)
Constant Contact (service for many bulk emails for various individuals & companies)
their emails are coming in and only the left side of the page is viewable. it's really strange. so... just wanted to bring that bug to your attention.Is this an HTML site your viewing in Safari? or is this using the Mail Application?
Both of which I am referring to as being on the iPhone. Might be some troubleshooting steps we can have you perform that could resolve the issue. -
Email campaign with picture in email body
Hello All,
I have searched for email campaign in BYD system but couldn't find anything like that.
We want email campaign to be run from SAP System (just like mail merge) in which email body can contain picture or .jpg file.
May i know about this? or any html code for adding picture in email body?
Please help, ThanksTry turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Verizon message to update my Samsung S5 - so I did and not my email is broken. Get message - unfortunately email has stopped. How do I fix this? I've shut down, restarted - nothing ... help!
A complete pain but this solution appears to have worked. Thank you for your help
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
I have lost my email configure with my yahoo email address how do I get it back
My email was set up so that I could click the email icon and receive all my yahoo emails, I now get an error message that the pop server is not responding, so I can no longer receive or send emails from the Mac but have to go via safari and then onto my Yahoo account. What has happened and how can I fix it?
Are you using the app 'Mail'? Assuming nothing's been changed on your computer it may be just a temporary glitch and right itself. If it persists, sometimes deleting the account in Mail and creating it again can fix things.
-
Just started using apple mail. Trying to set up email folders with example: Company/Company P.O. It won't let me do it. It will not allow / or . . What am I doing wrong or can this not be done. I tried to use the Edit menu and adding the special characters, but it still won't work. Please advise. mmather
-
Company email through exchange
I have tried every way possible to get my storm 2 to activate with my company email and will not connect? Why? I talked with my IT department and they have supplied us with all the information. It wants an exchange URL, and I have provided that URL for outlook web access and the server and will not accept it.
My IT does not have an answer and neither does Verizon.
What's UPHi and Welcome to the Community!
To clarify your situation, please clarify if this is OWA via BIS or if it is BES? From what you say, I can perhaps guess both.
If it is BES (but NOT BES-X), then check with your mobile service provider to be sure that you have a full BES-level data plan and continue working with your BES admins and your carrier to get this working.
On the other hand, if this is OWA via BIS, then in my experience, OWA can be very difficult to configure via the device interface to BIS (Setup > Email Settings). In my case, I was never successful via the device interface. Rather, I needed to use a PC/browser and log into my carriers web interface to BIS...you can find yours via this portal:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
You will have to create credentials for BIS -- I found the simplest way to do that actually via the device interface...create the credentials there, then they will already be configured on your carriers BIS website (from the above link) for your use from a PC/browser.
Now, use the link above (from a PC/browser) and log into your carriers BIS website (using the credentials you created on your device interface). Then very carefully follow the instructions in this KB to configure BIS for your OWA email. Go very slowly and do each and every step carefully...especially the mailbox name...that's usually the trickiest and most crucial.
Here are some other links that might prove helpful:
KB18567 BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
KB02858 Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
That all said, it is still possible that it won't work. There are scenarios where OWA admins have done one of two things:
Implemented ISA -- this prevents BIS from integrating the account
Blocked, in their firewall, the ability for the BIS servers to access the email server
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Question If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments. Screen 2/3 blanco on the left side With F11 all OK.
-
Can't open links on New York Times website
I have the New York Times as my home page. Until yesterday, I had no issues accessing any of the content within (except for the new Premium articles.) However, when I click on any article, I get an error back that says no data found. If I log in thro
-
Central Output Server View Manager on Windows 7, need patch for jfPreview.exe
Where can I obtain the latest version of JfPreView.exe? According to the following webpage: http://helpx.adobe.com/legacy/kb/central-central-pro-output-server-1.html Adobe Central and Central Pro Output Server 5.7, Windows support extended to Windows
-
How do I convert a large file which show error after is converting?
I've tried to export a PDF to Excel and word file and have not been able, show error after downloading and show converting in progress File is les 100MB and 936 pages
-
I want Apple to restore IPA fonts natively to OSx-10.7 and 7
As I work in multiple languages as a professional singer, I would like to see Apple to restore and include natively IPA fonts as they did in an earlier OS. I've tried to jerry-rig getting them on to my cpu but the experience altogether very windows-l