Map photo page

I just recently purchased my Mac and found the lovely feature of the maps page. However, I'd like to just print the map page (as this is for a past album already created using 35mm prints). So, to recreate the whole album would be rather difficult. However, I need to pull it into a scrapbook program so I can have it adjust it for a 12x12 album (so I need a JPEG image). I saw you can save it to PDF and then "save as" JPEG. I just want to print the one page... and, it seems that you cannot delete pages from the album so that you only have one page in the album. Can you help me out? Also, I am used to DPI, not pixels per inch. What pixels per inch is equivalent to 300 dpi?

you can create a map in a book and select that page and print just it using the PDF option and selecting the send PDF to iPhoto which will give you a JPEG in iPhoto of the map to use as you wish
dots are pixels are dots - same same - dots per inch = pixels per inch
And note that dpi is meaningless until you have INCHES - while digital files have a DPI field it is meaningless until you display or print which is when you get INCHES - files have only dots (or pixels) prints have inches giving you dots per inch
LN

Similar Messages

  • I tried to publish my project of 2 html pages, 3 photo pages and one widget page (map) to ipage hosting site. the two html pages published and that's all. Help.

    I tried to publish my project of 2 html pages, 3 photo pages and one widget page (map) to ipage hosting site. the two html pages published and that's all. Help.

    What's the URL of your site so we can examine it first hand?   Also try publishing the site to a folder on your hard drive and use the free FTP client  Cyberduck to upload your site.  It's been known to work when iWeb's ftp client has failed.
    OT

  • Photo pages not appearing in IE browsers

    Hi,
    Now that I've worked out image quality issues in iweb 08, currently testing my published site (temporarily in protected directory test mode). Through Safari Develop Tool I've checked various browsers and all browsers display my site correctly except IE browsers. In all IE browsers I'm noticing the photo pages are not displaying my image thumbnails except captions. Hovering and clicking the mouse over where the image should be visible brings up the slideshow and images do appear. The photo album pages are less then 12 pictures per album; images have been optimized. So this is not the problem regarding the thumbnail pages. So what could it be? Javascript issues?
    Frustrated because this one issue is preventing me from displaying my site live! Of course, I could just forget about PC users but I have products I want to sell and don't want to lose potential customers. One peculiar glitch on a website scares people away.
    Been searching all over the internet for answers but growing more confused. Although new to safari's develop tool and unfamiliarity with javascript fixes, curious if clicking on debugging javascript would be a remedy. If so, what would I need to do to fix the disappearing images? Or, should I just accept that iweb 08 and IE are incompatible and inform my visitors to use non-IE browsers such as Safari and FireFox? Such a letdown!
    Help most appreciative!
    Cheers, June

    I figured it out!!!
    Somewhere along the way, the following permission class got added to the pagedef's of two of the pages but not the others
    <permission permissionClass="oracle.webcenter.security.auth.HierarchicalResourcePermission"
                  target="serviceID=oracle.webcenter.page,scopeID=s8bba98ff_4cbb_40b8_beee_296c916a23ed,resourceID=/oracle/webcenter/portalapp/pages/*<page name>*.jspx"
                  xmlns="http://xmlns.oracle.com/adf/security">
        <privilege-map operation="create" privilege="create"/>
        <privilege-map operation="delete" privilege="delete"/>
        <privilege-map operation="edit" privilege="update"/>
        <privilege-map operation="personalize" privilege="personalize"/>
        <privilege-map operation="view" privilege="view"/>
      </permission>once i added the permission class to the other pages they showed up in the navigation model.

  • Photo Page Bug?

    I have produced a web gallery for real estate. On each page is a property description, photo album. google map etc. When I view this page in the browser and click a photo to view the album anything below the album is pushed downwards on the web page. When this happens I cannot view the content that has been pushed out of sight. Clicking back to the thumbnails does not resolve this situation as the bottom of the page is still not viewable.
    Refreshing the page fixes this.
    Is anybody else having this problem?
    Any suggestions.

    I have tried this darned page every which way and have come to the conclusion that a photo page is a photo page and it just doesn't work for adding too much else like text, google map etc.
    I really enjoy working in iWeb and it CAN be used for serious projects but I guess I have to accept its limitations and wait another two years to see if it will grow up.
    Maybe the iWeb developers are only about 10 years old!

  • Help with detail view on photo page... no help from previous post!

    I posted these questions a few days ago and although people have been looking no one has any suggestions yet...
    Is my request too complicated?
    Old Toad, Wyodor, Cyclosaurus... would you have any tips?
    Many thanks
    I am using iweb to create my site and have an album that contains photo pages. I used a web widget / HTML snippet, to jump from my album page straight to 'detail view mode' on my photo page.
    I'd like to customize the look of my 'detail view' a little (I'm using the 'White' Theme).
    I have removed 'subscribe' and 'download' and do not have a slide show.
    How do I:
    1. Remove the text 'previous', and 'next' that appear under the image leaving just the arrows?
    2. Change the look of those arrows (from 'canvasarrow-right03.png' and 'canvasarrow-left03.png' to 'canvastransport-left-N03.png' and 'canvastransport-right-N03.png')?
    3. Remove the arrow that is next to 'Back to album' leaving just text?
    4. Change the font and colour of this text ('Back to album') to Aerial Regular 12pt caps, 65% black?
    5. The thumbnails have a blue frame to indicate which image is in large view, how do I change the colour to an orange?
    6. Remove the buttons in blue and grey, top centre (that change the view from thumbnails and large pic to just large pic)?

    I can't change the "Sending Page" because it uses custom "Filtering & Sorting" to drill down to the addresses..
    Once the User has "Checked" the records to be mapped, they click the Map button, and it takes them to this Detail page (with the ID's in the URL)
    Now that you mention it, the Detail form does have all of the Form fields/wkRptID's (for each of the addresses) on the page.. but how would I iterate thru the form data of each record, and grab the wkRptID's and add them to the WHERE statement..?
    Either way, once I have the Query correct, it is then fed to my Google Map to plot the addresses..

  • Create a photo page and have the photo's link to other internal pages

    really basic quesiton, sorry but I can't do this for some reason. I created a photo page that is going to be a menu page to link to some internal pages. for some reason the Enable as a Hyperlink is greyed out and I can't click on it to make the image a hyperlink.
    Any help or suggestions?
    Thanks

    What you need to do is place a shape over the top of the image, then using Inspector, Graphic Tab give it an Opacity of 1% then you can make the shape a hyperlink.
    The imageholders on the photo page cannot be used as hyperlinks.
    Alos you must giv ethe shape an opacity of at least 1%, if you try 0% it will not work.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Drag and Drop to photo page creates links, doesn't replace placeholders

    I searched the discussions for quite a while and didn't find much similar to this topic. Basically, drag and drop is no longer working on my iWeb and my photo grids will not accept pictures to replace the placeholder (sample) photos. I will try to explain the whole problem in detail.
    I am a new iWeb user, and I set up a page without any problems at first. Yet when I returned in iWeb to add another photo page today, I have had a lot of trouble. I used the template Photo Page and opened the Inspector and the Media Viewer to drag photos onto the placeholder photos, as the Help pages and tutorials show. Yet when I drag the picture file from the Media Viewer into the photo grid, only a small text box appears that sets up a hyperlink to the photo file on my computer. I've tried messing with the inspector, seeing what the difference is between the placeholder photos' settings and the files I'm trying to add.
    The only differences I can see are: in the Link Inspector's pane I can tell the program is at first making a hyperlink to the file instead of displaying the photo (yet disabling the hyperlink doesn't change anything); also,
    In the Graphic Inspector pane that appears when I have selected a general area in the photo grid, at the top the "Style" , "Layout" and "Caption" options appear, along with a display of a sample photo style. When I click on one of the rectangles that appears with the file I am trying to drag and drop, I have only the "fill" option, which has "none" selected. Fiddling with the options does not get the photo to appear.
    I can see the blue grid surrounding the placeholder photos, so the photo grid exists. I have also tried using different templates' photo pages, but they all have the same problem. I also tried creating an album in iPhoto and importing it to iWeb, but only two photos appeared out of 12.
    So the main part of my problem is not that photos don't appear at all (if I try and insert them they appear on their own, completely independant of the template's style and the photo grid)., it is that they do not work with the photo grid and that drag-and-drop no longer works.
    Any information that could help is greatly appreciated.
    Sue

    Susan,
    Try out the following things. These suggestions are
    sort of the starting point for non-specific strange
    behavior in iWeb.
    1. Delete iWeb preference file at:
    YourHardDrive/Users/yourname/Users/Library/Preferences
    /"com.apple.iWeb.plist"
    2. Delete iLife Media Browser preference file at:
    YourHardDrive/Library/Preferences/"com.apple.iLifeMedi
    aBrowser.plist"
    3. Repair startup disk permissions using Disk
    Utility
    4. Reboot machine
    5. Delete iWeb application (but keep a backup of the
    Domain file!) and reinstall iWeb 1.0 from original
    iLife'06 DVD or Recovery Disks and then update
    directly to 1.1.1 via Software Update.
    These are the top 5 things that seem to garner some
    kind of positive results from people having similar
    problems.
    I am having the same problem Susan described. I've tried #1 and #2 from the above recommendations and still have the same problem of photos not opening in the photo page after dragging them from iphoto. I, too, published a site (not on .Mac, but I don't know if that matters) and now want to add a photo page. Also, the template shows six placeholders, but when I select the photo page only three appear.
    Hope you can help. Thank you.

  • Need help making photo page look clean,Time to show up on Google? Photoshop

    Just bought this Mac 2 days ago and am trying to make the switch. I was computer illeterate on my Dell as well but so far this program is pretty neat. I am trying to get my photo page cleaned up. I would like all the photos in a single row across the page with only one photo displayed underneath. I have seen a few demos with that done but I cannot figure it out. Ideally a slideshow would start automatically but I really just want a cleaned up page vs. a blob of photos.
    My site is http://www.greasysideup.com
    The picture demo is here http://www.apple.com/ilife/iweb/#album - the scuba picture on the far right of the iweb showcase is the look I am going for.
    Additionally how long does it take to show up on a google search? I am following one of the listings on here on how to do that. On the google search pages there is a brief description of the page as well, I believe it is the title page. How do I make Google say how cool my site is? if it ever shows up on google?
    Last question - is there a program on my Mac similar to photoshop? I want to do some simple 3-d looking text angled slightly as if it is coming out of the screen with my name and the name of my business.
    The other thing I want to do is take this picture, make the background black and make the planes orange or red then put those in the background on one of the pages.
    /Users/joshwilson/Downloads/Yak50_profile.jpg
    (I need to learn to post a jpg in the forums as well I guess!!) The photo is the last one on my website photo page labeled Yak 50_profile. I want to make the background black and the outline orange.
    Thanks for all the help. This site is great! I think I'll be glad I made the Mac Switch.
    Message was edited by: GreasySideUp
    Message was edited by: GreasySideUp

    I've done a section on search engines here...
    http://www.iwebformusicians.com/SearchEngines/SEO.html
    The page about sitemaps is here...
    http://www.iwebformusicians.com/SearchEngines/Sitemap.html
    There's a link on the above page to a free sitemap generator that will produce the sitemap for you in the correct format.

  • HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

    trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
    if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
    is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
    also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
    many thanks for your help.

    Photos are added to book in chronological order.  So if you want to add them to a book in the order you have placed them manually in an album do the following:
    1 - select all the photos in the album.
    2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
    3 - select just one photo from the album and create a book from it.
    4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
    5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
    OT

  • Rebuilding Photo Pages from Lost iWeb Site

    I mistakenly deleted my backed up iWeb domain file after doing a fresh install of OSX. I know there is no way to import the published HTML files into iWeb, so I am in the process of making a copy of my website manually. I am looking for a way to rebuild my photo pages that doesn't require me to look at the published site, identify which photo is on the site, find it in iPhoto, and drag it to my new iWeb site. Instead, what I'd like to do is grab the photo files from iDisk for each photo page, and then drop them into my new iWeb site. However, I can't seem to find on my iDisk where the actual photo files are stored. I suspect I am looking in the wrong place. The files in the iDisk/Web/Sites/Site Name/My Albums/Pages/Album Name/Media/Photo Name are too small and low quality. When I click the download link from the published site, it's the full size file. Where is this stored?

    I mistakenly deleted my backed up iWeb domain file after doing a fresh install of OSX. I know there is no way to import the published HTML files into iWeb, so I am in the process of making a copy of my website manually. I am looking for a way to rebuild my photo pages that doesn't require me to look at the published site, identify which photo is on the site, find it in iPhoto, and drag it to my new iWeb site. Instead, what I'd like to do is grab the photo files from iDisk for each photo page, and then drop them into my new iWeb site. However, I can't seem to find on my iDisk where the actual photo files are stored. I suspect I am looking in the wrong place. The files in the iDisk/Web/Sites/Site Name/My Albums/Pages/Album Name/Media/Photo Name are too small and low quality. When I click the download link from the published site, it's the full size file. Where is this stored?

  • I have drawn some maps in pages using shapes and arrows. When I delete a shape a little grey dot appears that cannot be deleted. Any ideas?

    I am using shapes and arrows to create concept maps in Pages. After saving the document I have opened it again and tried to make changes.
    When I delete an arrow or shape a grey "Do not" sign pops up. It cannot be highlighted or deleted. My map now looks like it has grey measles.
    Any idea what is happening?

    Hi Kiku,
    Select all the objects that you want in your map.
    Menu > Arrange > Group
    Copy, then Paste into a new blank page.
    Regards,
    Ian.

  • How to hyperlink a photo in photo page? thanks

    The page I want to link is the one that show up after click on a photo in photo page. How can I do that? Thanks.

    I found a way to do it. Just hyperlink the URL of photo page, add # and the photo number you want to the end of the URL. for example, the URL of first photo on photo page is:
    http://web.mac.com/xxxxx/sample.html#1.html
    Hope this would help.

  • Can a Photo page be used as thumbnail links to movie pages?

    I've made a photo page with say 20 or so photo thumbnails. I have made separate movie pages for each movie. Dragged each movie page link to the related picture on the photo page and sized the button to be the same size as the thumbnail image. Checked that the button is linking to the correct movie page.
    In iWeb, when I "make links active", everything works properly. But once it's uploaded, the thumbnails/buttons, when clicked, open up a new browser window with just the jpg thumbnail.
    Any ideas to get this to work? Or do I have to start over, and lay it all out maually?
    G5 DP 1.8 & PowerBook G4 15"   Mac OS X (10.4.6)  

    I think the problem may be related to the Photo page template. When you click on the thumbnail, I think there is some built-in functionality to open a new slideshow window or something.
    Instead of using the Photo gallery template, try using a plain page...one of the templates with as few elements as possible...maybe the movie template. Then manually add your movie thumbnails and size them to your liking. then add the hyperlinks to your movie pages to each thumbnail. I think you might find that this works better.
    ==> www.DirtDoog.com <==</a>    
    Place A Virtual Pin On Putt-Putt's GuestMap!

  • Links to Photo Pages Don't Work After Publish

    I have a page with different photos that I would like to link to different "galleries" (iWeb photo pages):
    http://www.spiritshopstaff.com/STAFFBASE/STAFFPICS.html
    The links to these internal pages work just fine within iWeb, but when I publish (I use Fetch to ftp the site to Yahoo host), the links no longer work.
    I created each of these photo pages using an iWeb template and dragging and dropping an iPhoto album to each page, and I suspect this may have something to do with it, but I really have no idea. Can anyone help me figure this one out?
    Power Mac G5   Mac OS X (10.4.8)  

    I meant that I use Yahoo web hosting, and I transfer all of my site files from my Mac HD to the host, via the Fetch ftp program.
    All of my site's pages were created in iWeb. The photo pages themselves are internal pages (within the site) that I purposefully left out of the site navigation menu in order to keep things clean. I want users to navigate to these different photo pages from a "gallery selection" page (the STAFFPICS page).
    All of the other links within the site appear to be working properly (hyperlinks are active).

  • Buttons appear as Question Marks in Photo Page

    Hey all,
    I've been having this problem where buttons (Start Slideshow, Email Me, and Made on a Mac) show up as Question Marks on one of my Photo pages (titled "New Photos)
    Follow Link below:
    http://web.mac.com/adventurestorys/iWeb/Site%201/New%20Photos.html
    In the past I've been able to make a small change to the page and re-publish which corrects the problem. But this one is stubborn. Any advice?
    Note that I have already tried the "Publish all to .Mac" and that didn't help. And I do Empty my Cache in Safari after Publishing. Also, the problem only occurs on this particular photo page, the others in the site are just fine. So I recreated the page from scratch and re-published, but that still didn't help. Not sure what to try next. Thanks for your help.

    Cabo23:
    Welcome to the Apple Discussions. I see what you mean. The images for the buttons are not located by the page but they still work. Are these special image files you're using or the ones that come with the theme?
    You might try creating a new photo page, select all of the photos from the old page and past into the placeholder on the new one. Do the same for the text, copy it from the old and past into the text box from the new. Then publish to a folder on the desktop and see if the buttons are correct. If so , delete the old page, rename the new one to the old name and publish.

Maybe you are looking for