Map R/3 contact person address to CRM contact person address

Hi,
Does anyone know how to enhance the middleware so that the business address of contact person in R/3 can be mapped/downloaded to the BP standard address (shown up in BP transaction) in CRM ? The business address of the contact person in R/3 is currently mapped to BP relationship address in CRM, while the home address of the contact person is mapped to the BP standard address.
Thank you for the help,
Regards,
-James

Hi,
We have the sam issue to solve!
Found any answers yet?
Best Regards, Cem

Similar Messages

How can I add an address map to each contact?

Hello:
When tapping a contact address in the Address application, the map view pops up and I can add a pin for the specific address. However, when I close the application the map disappears. I also notice that if I click on the lower right corner of the map screen, I see an option labeled "list."
I've got two questions:
1. What function does the list provide? (I've tried looking in the user's guide and there is no mention of this feature.)
2. Can I permanently store the map for each contact on my iPod, or does it need to reload each time using wi-fi?
Thanks.

its going to have to reload the map each time, it can't save it.

When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

It isn't. Forward it to [email protected] and then delete it.
(109195)

Adding maps to existing contacts

Hi can only see a way to add maps to new contacts. What about existing ones?

After installing iPhone OS 3.0, I notice that my Exchange Global Address List now appears below my regular contacts. Case closed!

Maps - picks up my old address as current location

Opened maps in Mavericks for the first time and it asked me if it could use my current loaction which I agreed to. It shows my current location as my previous address which I left about a month ago. I'm not sure where it is picking this up from. I checked contacts and my home address was reflecting the new one. I clicked on "show map" with the contacts application and it went to my new address. Any ideas? Thanks

Try this:
* Navigate to Settings>General>Network>Enable 3G and toggle to “OFF”
* Locate yourself using the iPhone 3G’s GPS receiver in the maps app.
* Navigate to Settings>General>Network>Enable 3G and toggle to “ON”

HT5429 Apple maps has my wrong home address how to delete and enter correctly!

With new apple maps it doted my home address incorrectly and I cannot change it or delete it, help

Report the problem as Malcolm has said - but don't expect it to be corrected any time soon
i reported my address as incorrect several times since September - it's still wrong
download the new google maps app and try that - you will need to copy the address from contacts and paste to the search field (for now at least) but that not a big deal to locate your intended destination

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Invalid mapping of rule to service address ranges

Hi
I have a configuration with a vip port range and service port range. When I try to add to the content a primary sorry server i got following answer:
Invalid mapping of rule to service address ranges
I presume, that this is beacause i don't have an address range in the primary sorry service. Is there a way to configure the primary sorry server ?
*************Configuration
content intnpp.post.ch_80
advanced-balance sticky-srcip
sticky-mask 255.255.240.0
vip address 194.41.224.28 range 16
add service h01t2e_farm_80
add service h01t57_farm_80
redundant-index 21490
port 80
protocol tcp
url "/*"
active
primary sorry Server
service sorryint.post.ch
ip address 194.41.160.68
keepalive type tcp
keepalive port 80
redundant-index 14320
type redirect
active
Thank you for the answer

To me it looks like you are using two services in the group that contain ip ranges and then you are trying to add a service that does not have a range.

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

Is there a way to use a bookmark from Maps as the home/work address of a contact?

I'm trying to use location-based reminders. But the Home and Work addresses I have in my own contact card are not recognized by Apple Maps.
Is there a way to use Apple Maps to set the Home and Work addresses in my contact card to something that it will be able to understand?
Edit: It doesn't have to be with Apple Maps. Google Maps or any other service where I can bookmark my "Current Location" would be fine. I just want an effieient way to use Location-based reminders when manually inputting an address is not an option, but locating it on a map is.

Unfortunately there is no way to do that current stage , you would need to add the tags manually.
Thanks,
Sanjit

How to map company code for customer master in CRM

Dear CRM Experts,
The scenario is ,Customer Master is created in SAP CRM 6.0 and it flows to ECC 6.0 . After replicating the data to ecc i am manually assinging company code to customer master.Is there any option to map company code to crm customer master level.
Regards
Ashwin

Dear All,
The above requirement was address by Development.

Can 'maps' on iPad find the address in china?

I ve stored some Chinese addresses in the 'contact', but when I use the 'maps', I found it can not find these addresses.
Is it possible for the 'maps' to do that?

Ask the app developer. That's not an Apple product. I suspect that if it wasn't backed up, it's gone.

E75 - Maps - BUG REPORT - Contact Search by Compan...

Finally, a Nokia Business Phone allows direct search from Contacts by typing the Company name, thanks for that.
However, when I tried to use Maps to navigate to a client company, it turned impossible to find the destination by entering the company name.

thats odd
i just went to maps (im on 1.1.3) typed part of the name of one of my contacts it showed me a match - i clicked it and it mappped it fine
i then went to contacts- picked one - clicked on an address - and again it mapped it fine
just like it did when i was on 1.1.2

HT5429 in maps when I type an address I get the name and a little green car. I want to switch back to the little red icon (street view). how do i do thisplease?

In Maps when I typed in an address I get a little green car at left of persons name where I used to get a red logo for street level. I was wondering if anyone out there can tell me how to switch between the two. Thankyou

Apple Maps, the one in iOS 6 does not have Street view available.

Suggestion: map function for contacts

suggestion for iphone contacts - i think it would be awesome if there was a "map" function associated w the contacts addresses, so that if you are traveling or whatnot you could pull up an area and see what friends are around there, i know facebook had a similar app for a while, but a lot of people no longer but their addresses on there or just aren't on facebook, this way you would see where their actual location is based on what is in your phone

Find My Friends already does this.

Map R/3 contact person address to CRM contact person address

Similar Messages

Maybe you are looking for