Map Serial No to External Id

Hi All,
How can we map the Serial no coming from R/3 to External Ids of Ibase in CRM while loading.In BADI CRM_EQUI_LOAD.
Thanks.
Ashish

Hi Saujanya,
When you send it from the workplace you also send it to your Yahoo mail-id? As far as I can see from you replies the problem lies outside of SAP. Maybe a SPAM filter which blocks the message. This could be due to the mail-id which sends the e-mail.
Regards,
Martin

Similar Messages

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Can you create an image map hotspot for an external URL in Dreamweaver CS6?

Duplicate post: http://forums.adobe.com/thread/1338701?tstart=0

Serial number with external number range.

Dear all
pl how to configure the logice for serial number like gbrx123xeao120001here gbr is prefix code which is fixed x is model sufix,e is yaer of mfg 0001 is serialnumber. so now tell me how to generate the aboce said serial number when production order creation.
pl tell me all config and related settings .
thanks and regards
Baswaraj

Hi ,
Please mainatain the external number range for serial number management as
from 01 to 999999999....... and AAAA.....to ZZZZZZZZ.....
While doing goods movment you can use user exit to define serial number as per the customized calculations .
Also you can create seperate Zprogram for goods movement there u can calculate for Serial number and pass it to goods movement BAPI as per your requirement .
Hope this information helpful .
Best regards ,
Chithaanantham

How to map with GW8 Server external POP3 mail accounts ?

I have "small" simple problem. I have GW Server 8.0.2. I have GW Internet Access (GWIA) installed. I can send e-mailes from clients to internet via built-tin SMTP protocol. It works actually.
But... I try to find place in C1 or wherever else which is responsible for setting list of external POP3 accounts, accounts placed on my current Internet Provider's server. So my simple need is to map, to be able to connect and download as server GW and to server GW many POP3 accounts from my current e-mail Server. And than which e-mail adress (external POP3 account) should be saved to which mailbox / user in my GW Server. I'm not talking about mapping that accounts indirectly, via setting in Clients !!! Everything must go via GW Server and automatically.
I dont want to change that state of course (= reach e-mailes from Internet directly to my local GW Server changing MX in DNS of my domain). Nope. I just want to map, to download posts from external mailboxes via POP3 or IMAP protocole. Nothing else.
I'm fluent in Microsoft systems. There is just simply POP3 Connector for Exchange. SMall utility whish is simple list of login, pass, POP3 server adress and name of mailbox where to save such downloaded e-mailes. I just need the same functionally utility or page in C1 or any other place ;-)))
ANY HELP ?
Cause Google are blind for that simple "problem" :-((( I know - Novell describes POP3 solution in GW8 Admin book, but... only as I want to be POP3 Server for external clients. This is slightly different, reversed sittuation :-]]] I want to connect to POP3 accounts, not to server POP3 accounts :-]]]]

Originally Posted by vatim_kk
I have "small" simple problem. I have GW Server 8.0.2. I have GW Internet Access (GWIA) installed. I can send e-mailes from clients to internet via built-tin SMTP protocol. It works actually.
But... I try to find place in C1 or wherever else which is responsible for setting list of external POP3 accounts, accounts placed on my current Internet Provider's server. So my simple need is to map, to be able to connect and download as server GW and to server GW many POP3 accounts from my current e-mail Server. And than which e-mail adress (external POP3 account) should be saved to which mailbox / user in my GW Server. I'm not talking about mapping that accounts indirectly, via setting in Clients !!! Everything must go via GW Server and automatically.
I dont want to change that state of course (= reach e-mailes from Internet directly to my local GW Server changing MX in DNS of my domain). Nope. I just want to map, to download posts from external mailboxes via POP3 or IMAP protocole. Nothing else.
I'm fluent in Microsoft systems. There is just simply POP3 Connector for Exchange. SMall utility whish is simple list of login, pass, POP3 server adress and name of mailbox where to save such downloaded e-mailes. I just need the same functionally utility or page in C1 or any other place ;-)))
ANY HELP ?
Cause Google are blind for that simple "problem" :-((( I know - Novell describes POP3 solution in GW8 Admin book, but... only as I want to be POP3 Server for external clients. This is slightly different, reversed sittuation :-]]] I want to connect to POP3 accounts, not to server POP3 accounts :-]]]]
You need to use an "old" tool called pfa (pop forwarding agent) that came with SBS.
You set the external email server credentials in the user's object via C1 and the java applet runs on the same box as your gwia.
Cool Solutions: How to get your POP Mail into GroupWise

ID : interface determination - Interface mapping (file- IDOC with externa)

Hi,
scenario : XML file read and mapped to Multiple IDOC in single message
all IR stuf are done but in the ID I cannot choose the mapping interface
here is a document of everything that was done...http://docs.google.com/Doc?id=dcsvs2n3_51jnrfw6
Thanks for the help

Hi Stepen,
Simple for Reciever Business System did you add the Idoc itself that was imported as Receiver Interface..
Just double click the Receiver Business System and Then click Receiver and See if the IDOC name exists other wise insert it...
<b>Also In</b> the Interface determinatin select the actual idoc that you imported and not the XSD....
Finally if the above doesnt work Try this since you are using ED create Message Interface and mention the xsd as MT.... and in Interface Determination use the Actual idoc imported and not ED ....
Regards,
sridhar
Message was edited by:
sridhar reddy kondam

Is it possible to get the serial number from external C++ code?

Hi,
I have a C++ library called by a CLF in the LabVIEW RT from my cRIO. I am trying to use the cRIO serial number in my C++ code for licensing purposes. Is it possible to get the cRIO serial number using the C++ API?
I found information on how to do this from LabVIEW itself (http://digital.ni.com/public.nsf/allkb/74924FEE303440998625727D005197FA), but it would be really helpful to be able to do it from the C++ code.
Thanks in advance!
Solved!
Go to Solution.

Hi mkossmann,
Thanks for your suggestion. I have never used the VISA library from C++ or from LabVIEW, actually. I'm a newbie using NI hardware so sorry if the questions are too basic.
Is there documentation on the VISA library? I have found the DLLs on my windows machine, but I don't find any other documentation.
Thanks,
Sara

Mapping Network Drive for external user does not work

I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
I am able to map this network drive when using [email protected] as user.
However when trying to do this for the user [email protected] I am not able to map the drive.
I am testing this in order to simulate the client to map the network drive.
Logging on the beehiveonline with the user id [email protected] works fine.
Your help will be greatly appreciated.

Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
Try again and let me know how it goes.
Phil

ITunes mapped to an external Hard Drive.

I think you guys answered ths question for me when I was looking for help regarding my topic, but I just want to make sure for future reference, that there is an easier way to do this tha the way I did it.
After 4 hours of messing around and finally fixing, I found (I think) my answer on this forum. Simply mapping iTunes to the external drive which now has the content, is not enough. I think all that does is tell iTunes where to put new purchases. The library list is there, but when trying to play or sync anything, there is an alert exclamation mark. When you click on that it tells you that the song can't be found and asks would you like to find it. I knew something was wrong when none of the cover art was available. So I did a test and "found" 2 missing songs, and 2 TV shows. The exclamation mark then disappeared next to each, the songs played, and I tried to sync to Apple TV just the aforementioned content, and that worked perfectly.
So now I'm faced (since I didn't know how to do this, and frankly still don't have the easy answer) with "finding" every single piece of content manually. Yikes!. So I found on this forum the "add to library" command and everything shows up fine and plays fine except that I now have duplicates of everything. One each of the exclamation point and one of the real content. LOTS! 1000 plus songs, 3 dozen movies 100 plus TV shows, audio books, podcasts.
Here is where I don't know the easy solution, which you guys know for my future reference, once you've "added to library". What I ended up doing was deleting all the exclamtion points one by one. That part alone took and hour and a half of near midnight, very tired, bleary eyes. The good thing was if you happen to accidentally try to delete the real content as you go down the list you get a warning. I checked the trash when I was done, so nothing was accidentally deleted.
The sync took quite a long time, about 9 hours, because there is alot of video content, but it's all on the TV now. Everything! Phew!
Is there an easier way to do this when you put your library on an external drive?
Many thanks for your help.
CD3

*Is there an easier way to do this when you put your library on an external drive?*
Sure.
Don't move the files yourself.
Point iTunes prefs where you want all you r music to be located.
Then go to menu Advanced -> Consolidate library.
This will make a copy of everything in your iTunes library at the location you have specified in your prefs.
All the info for your songs is maintained - ratings, date added, last played, etc.
Then you can delete the original files.
See this -> iTunes for Mac: Moving your iTunes Music folder

Entity Services: readByCustomKeys operation mapped to External Service

Hello *,
in my CAF application I'd like to read a product from SAP PLM. Within my Entity Service materialNumber is my custom key and therefore a corresponding operation exists: readByCustomKeys.
I map this operation to my External Service (Web service provided by XI).
As I can't test this operation directly with the Service Browser (deosn't appear there), I wrap my Entity Service with an Application Service where I use the readByCustomKeys operation from Entity Service.
Now when I test the Application Service operation I get the following error message in Service Browser:
ERROR. Invalid type value :
In XI I can see that there was no error and I got well defined XML data as response. So the problem must occur anywhere in the mapping back from External Service data to Entity Service attributes.
Wrong data type mapping can be excluded as I already tested this possibility.
Does anyone know what could be the reason?
Thanks for your answers and best regards
Joschi

Hello Joachim,
I dont have a lot of experience with readByCustomKeys (one experience which failed) but uou can also use read itself. If you have defined materialNumber as a key in your entity service, then this field can be used in read operations as well (I have a lot of positve experiences with this approach). You will find materialNumber while mapping read with your external service and you need not map the key field generated by Entity Service.
For testing entity services, we have had several positive experiences with the config browser, specially for a findBy, read and even update operation. It was very easy to have a prototype UI to check the entity services.
I know this isnt the answer to your question, but just sharing my experiences.
All the best!!!
Regards,
Parag.

Pass output parameter from mapping to external process in a Process Flow

In Process flow, how do we pass an Output parameter from a mapping (generated by a post mapping operator) into an external process (shell script)?
I have a mapping that generates an output parameter and I would like to pass this parameter to an external process (a shell script) with a process flow. Is this possible?

Hi Norman,
Unfortunately in the current release, you cannot do this. What you can do, is store the value into a table and read it in the external process, or write it into a file and read it from there. The next release will support passing output parameters from one activity to the next.
Thanks,
Mark.

Message Mapping - External Definitions

My Scenario
1) File1(Request with Employee Number) - Sent to XI (Async)
2) XI will send the Request over HTTP and will Receive the Response(Employee Details) (Synchronous)
3) The HTTP Response will be sent to File2(Employee Details) (Async)
The Request and Responses are XSD Messages. I have Imported them into External Definition in my Repository.
Created a File Request - Abstract - Asynchronous - Message interface
Created a HTTP Request-Response - Abstract - Synch - Message interface
Created a File Response - Abstract - Asynchronous - Message interface
Message Mapping: (I am stuck here)
I need to Map the File Request to HTTP Request
I need to Map the HTTP Response to File2Response
How can I creat the Message Mapping for the above situation?
Thanks.

Hi,
You will need to create the following message mapping:
1. File Request - HTTP Request
2. HTTP Response - File Response
you can map Message Types to External Definitions and vice versa.
They should appear in the list for the relevant software component.
Or am I missimng something here ?
Cheers
colin.

Failed to update a list item to external list

I'm getting below error when I try to add my record to external list. This happen when spExternalItem.Update for 2nd time. I have value in my params
"Failed to update a list item for this external list based on the Entity (External Content Type) 'SA' in EntityNamespace 'Triggers'. Details: Null was returned to FindSpecific (Read Item operation)."
SPList spExternalList = contentDb.Sites[0].RootWeb.Lists["SA"];
List<string>
lstMachineNames = GetMachineNames(lstWarehouseTaskRecords);
foreach(stringstrMachineName
inlstMachineNames)
SPListItemspExternalItem = spExternalList.Items.Add();
spExternalItem["FormType1"]
= "WH";
spExternalItem["SerialNum1"]
= strMachineName;
spExternalItem.Update();
Serial Number is "map to identifier" in External Content types. "Required" and "Read-only" check box is uncheck. Anyone has any idea? please help.
[UPDATED 7 May 2014]
I believe it is due to BDC problem. I created another column called ID so I can map this ID column as identifiers instead of using SerialNum1 and this error solved!

Hi,
As you said, the error thrown when executing the Update method for the second time.
I suggest you debug your code in Visual Studio and keep watching the values of objects in use to get more details about the root cause of the error.
What’s more, you can take a look at the posts from Dimitry and Scot in this thread with similar error message:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/29fb464f-3539-40c4-91c5-216b0363b8ef/null-was-returned-to-findspecific-read-item-operation?forum=sharepointdevelopmentprevious
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

HELP!!! External HD / upgrade to iTunes 8.02 problem

Hi
I transferred my iTunes library to an external hard drive in Jan09 to free up space on my pc. I copied and pasted the whole iTunes folder, and checked a few songs played from there, before deleting my c/users/myname/iTunes file. i havent used iTunes since then.
I then recharged my iPhone a few times and iTunes upgraded to v8.02 (hard drive not plugged in then)
I tried to use iTunes yesterday and I went to 'edit/preferences/advanced' and changed the mapped drive to my external HD (whilst it was plugged in).
But each time I tried to play a song, it says 'the song ,,,,, could not be used as the original file could not be found'
So I transferred all my music back to my c drive, and redid the mapped drive in edit/preferences/advanced' !
But it still wont play a song!
Also I have lost all my playlists which I am gutted about.
In my iTunes folder (on C drive) I have:
- album artwork folder -> Cache, Download and Local folders
- iTunes music folder -> all my albums
- iTunes Library (iTunes Database File)
- iTunes Library Extras (iTunes Database File)
- iTunes Library Genuis (iTunes Database File)
- iTunes Music Library (XML Doc)
If I go into the iTunes music folder above, (Not through iTunes) and double clock a song it opens up iTunes and plays OK. But not if I click it in iTunes!
Any ideas what I can do to get my songs back into iTunes?! And how do I get my playlists back?
Thank you very much for your help!
Hayley

This well-written iLounge Article is a must-read for anyone considering moving their Library to a new computer or a new location. Or, just wants a better understanding of how iTunes manages your music. A bit late for you, but still required reading.
These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
MacMuse: Computer Crashed (free user steps – music recovery only)
Copying music from iPod to computer (a primer on various methods and software)
Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
iPodRip Software (Free trial: Mac & Windows)
PodUtil Software (Mac & Windows)
YamiPod Software (Free: Mac & Windows)
PodPlus Software (Windows)
TuneJack Software (Windows)
XPlay (Windows software For Music Recovery &/or Cross-Platform Functionality)
XPlay Photo Browser (For recovering Photos)
Best of Luck

Map Serial No to External Id

Similar Messages

Maybe you are looking for