Map Sub-Domain to specific port

Hi,
I installed Tomcat 5 separatly from the built-in one, listening at port 8080.
What I would like to do now is have a sub-domain, that points to this port.
sub.mydomain.com -> www.myotherdomain.com:8080
Is this possible with the Admin Tool, and how?
Thanks for any help
Aldo
  Mac OS X Server (10.4.9)  

I tried again with this two line an it worked.
Here the rewrite_log:
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (2) init rewrite engine with requested uri /
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (3) applying pattern '.*' to uri '/'
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (4) RewriteCond: input='GET' pattern='^TRACE' => not-matched
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (3) applying pattern '^/(.*)$' to uri '/'
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (4) RewriteCond: input='sub.mydomain.com' pattern='sub.mydomain.com' => matched
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (2) rewrite / -> http://localhost:8080/
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (2) forcing proxy-throughput with http://localhost:8080/
83.79.170.214 - - [24/Apr/2007:08:54:23 +0200] [sub.mydomain.com/sid#1847e8c][rid#1834834/initial] (1) go-ahead with proxy request proxy:http://localhost:8080/ [OK]
Hope it helps.
  Mac OS X (10.4.9)  

Similar Messages

  • How to redirect a sub domain to a specific page in Sharepoint Online

    Hi, 
      My Organisation has a O365 account, and hoisted the public website on it, now user requests to have a friendly url for a specific page on the public website.  I've added a sub domain on O365.  but i cant find ways to redirect this domain
    to the page.  How can i do so? 

    Hi,
    If you need to redirect the sub domain to a specific page in SharePoint Online, you need to rename the Public Website with the sub domain.
    Then configure the friendly URL for the page in the Public Website.
    http://office.microsoft.com/en-001/office365-sharepoint-online-enterprise-help/upgrade-your-public-website-HA102801184.aspx?CTT=5&origin=HA102828142#_Step_5_%E2%80%93
    Or you can use the managed metadata navigation for the Public Web site and configure the friendly URL for the page.
    http://jeffkelly.com/2014/05/office-365-public-website-what-no-managed-metadata-mms-navigation/
    In the meanwhile, you can post your question to the forum for Office 365: http://community.office365.com/en-us/f/default.aspx.
    More experts will assist you, then you will get more information relation to SharePoint Online.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How to make a route for sub domains with same IP but another Port

    Hello , 
    I have Windows Server 2008 R2 Domain Controller . the IP address is 172.16.0.200 and the Domain is ( BTC.local ) . I have software login page ( localhost:6090 ) the port of service is 6090 . and if i want to access this page from another PC then i write
    ( 172.16.0.200:6090 ) . My question is how i can change the IP address and the port to sub domain like ( IQ.BTC.local ) so that i can access from another PC by writing the sub domain . 

    > question is how i can change the IP address and the port to sub domain
    > like ( IQ.BTC.local ) so that i can access from another PC by writing
    > the sub domain .
    Create CName records in your subdomains DNS servers.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • Using URL maps to search for a particular sub-domain in a URL

    Hi Guys,
    Seem to be having some trouble with URL maps, and trying to search for a particular sub-domain in a URL.  Let me explain:
    We will have a number of applications frontended by our CSM VIP such as:
    sftp.poc.monash.edu.au
    callista.poc.monash.edu.au
    I'm trying to get the CSM via policies and URL maps, to search for say "callista" and direct this traffic to a particular farm as below...however when i use the match statement the connections are dropped.
    map CALLISTA url
      match protocol http url *callista*
    map CALLISTA-SFTP url
      match protocol http url *sftp*
    policy CALLISTA
      url-map CALLISTA
      sticky-group 197
      serverfarm CALLISTA
    policy CALLISTA-SFTP
      url-map CALLISTA-SFTP
      sticky-group 198
      serverfarm CALLISTA-SFTP
    vserver CAL-POC-DECVIP
      description decrypt VIP for SERVERFARM CAL-POC
      virtual 172.16.11.116 tcp www
      persistent rebalance
      parse-length 4000
      slb-policy CALLISTA
      slb-policy CALLISTA-SFTP
      inservice
    So i'm wondering if there is a better regular expression statement i can use to ensure that all the traffic that has "callista" in the URL is directed to a particular farm?
    thanks
    Sheldon

    Having a read through the CSM config guide I think i may have found the answer.  I noticed that the URL maps only work on searching a "path' after the domain e.g. the presence of either "index" or "cep":
    callista.poc.monash.edu.au/index.html
    or
    callista.poc.monash.edu.au/cep/
    I've tested the above logic and this holds true....therefore there doesn't seem to be a way of searching for a "subdomain" in the URL as opposed to various bits of a "path".  That is i'd like to search for "callista" or "admissions" instead of the path
    callista.poc.monash.edu.au
    or
    admission.poc.monash.edu.au
    Can someone confirm this one way or another?  And if the sub-domain search is not possible, are there alternatives to getting it to work?!
    thanks
    Sheldon

  • Iweb and sub-domains - is this an example?

    I am trying to build 1 web site that will have 4 subsections. For example, I will have a family site example - www.jones.com.
    Then each person will have their own sub page - www.jones.com/bob, www.jones.com/mary, etc.
    With in sub site, there will be pages called photos, movies, blog, etc. - but the same for all
    How can I do this in iWeb? I have all the child sites built but want to upload it to a hosting company (godaddy but use .mac) Is this an example of a sub-domain? What is the best way to lay this out and is iweb capable of doing this?
    Thanks in advance
    jf

    so if my URL is this: www.jones.com, I want to have a site:
    www.jones.com/randompictures
    There are two ways to accomplish what you are asking...one involves subdomains, one does not.
    Putting the issue of subdomains aside for the moment, let me illustrate what you are doing currently...
    You have a domain name: http://www.jones.com
    And you have set it to forward to: http://web.mac.com/username/iWeb/ (this is what you will need to do to get this method to work right)
    So everyone who types http://www.jones.com will get forwarded to http://web.mac.com/username/iWeb/publicsitename/pagename.html (this is your default publicly available site)
    If you want a site that only certain people can get to if they know the specific address, like http://www.jones.com/randompictures , then all you have to do is to create a separate (new) site in iWeb called "randompictures" and upload that along with your public site.
    The real web address for this site will be:
    http://web.mac.com/username/iWeb/randompictures/pagename.html
    But since your domain name is mapped (forwarded) to the underlined portion, the visitors to this site would only have to type:
    http://www.jones.com/randompictures
    Does this make sense? This is probably the easiest way to do what you are wanting to do. It involves making the second private site in addition to your regular site that everyone can get to by typing http://www.jones.com . It does not involve using subdomains.
    Subdomains can be used to provide the same kind of functionality, though. To explain, let me first dissect out a URL and tell you exactly what a subdomain is...
    http://www.jones.com/randompictures/index.html
    Looking at this URL, here are the parts...
    http://- this tells the browser to look for and HTML file
    www- this is the name of the subdomain
    jones- this is the name of the domain (domain name)
    com- this is the top level domain (TLD)
    randompictures- this is a subdirectory (think: folder)
    index.html- this is the name of the HTML file that is displayed
    So you see, the subdomain is like a subsection of the main domain name... and oftentimes it is assumed to be "www" and typing in http://jones.com usually will resolve the "www" subdomain automatically.
    A subdomain, like your domain name, can be forwarded to any other URL, just as you have forwarded your domain name to your iWeb URL. Therefore, an alternate solution to your wishes can go like this...
    You have two separate sites made and uploaded with iWeb: publicsite (default) and randompictures
    Your domain name is forwarded to your short iWeb URL http://web.mac.com/username , which automatically resolves to your default "publicsite" homepage.
    Now you setup a subdomain at GoDaddy called "randompictures". You can then setup this subdomain to forward to http://web.mac.com/username/iWeb/randompictures/ which will lead to your private iWeb site. People "in the know" would access this private site by typing:
    http://randompictures.jones.com
    That's your subdomain at work! This method is slightly less easy than the first, but works just as well.
    Here's what I do to get to the subdomain configuration page:
    1. Go to http://www.godaddy.com
    2. Login under "My Account" on the right side of the page
    3. Select "My Domain Names" under the green "Domains" dropdown menu on the left side of the page.
    4. Click directly on your domain name from the list provided
    5. Under the Account information section, you will see a box titled "Total DNS Control" and inside the box you will see a link called "Manage Subdomains".
    Let me know if you have any questions about any of this...

  • LDAP multidirectory with sub-domains

    Hi,
    i have some difficulties using LDAP COM object that comes with the IP phone Services SDK. I would like to search the whole AD, which has multiple subdomains. I would like to search the whole directory structure, with the base: DC=company, DC=country, without specifying any particular OU. However, the connection with this kind of directory base configuration fails (the COM object is not created), so i can not search the whole directory, only specific OUs. Is there any way to achieve searching the whole directory structure?
    Regards
    Marko

    Originally Posted by hwoess
    Hello to the commmunity!
    I have been done with our it-partners a DSfW-Setup. There are two OES2 Domain-Controllers which holds the "main-domain". Connected to this "main-domain" were two configured sub-domains (OES2, too). They have been setup virtually (VMWare). And there is the problem with our DSfW-Installation. If the VPN-tunnel (the sub-domains are connected through) is broken or I reboot the first "main-domain"-Controller, all the sub's didn't work. I mean, the don't reboot, but they have no "domain-functionality". I have seen, that the all the controllers make a (I guess) LDAP-connection to the first installed OES2 Domain-Controller. I don't know why. Is this normal? Can I change this?
    What I have to say is, that we connected to each (Sub-)Domain through a trust or a forrest a real MS AD. We put our workstations into the real AD and through the trust or forrest we get the users from eDir or DSfW.
    As I know no one has a construct like our company here in Austria, so nobody could help me. Maybe the community does!
    With kindest regards
    Hans-Christian Wssner
    Hi,
    When the VPN tunnel is broken or the first domain controller of the DSfW parent (first) domain is down, is the complete of eDirectory tree (all the partitions) still available (reachable)to the domain controllers of the DSfW sub-domains (child domains). You can place additional read-write replicas on the other DCs (for the partitions that are missing) if the complete eDirectory tree is not available when one of the above two conditions occur.
    Thanks,
    Praveen Kumar

  • Network ACL for two specific ports

    As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.
    I'd like a HTTP port and an SMTP port open for the local loopback address. These are ports 7777 and 25. It's my understanding that you can have only one ACL per host. While it seems you can create more, any additional ACL's for the same host don't always work as expected. So does anyone have any advice as how I can do this? I'd rather not have every port between 7777 and 25 available but this is what I currently have...
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(
    acl => 'local_loopback.xml'
    , host => '127.0.0.1'
    , lower_port => 25
    , upper_port => 7777
    );

    Billy  Verreynne  wrote:
    As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.>Not so in my experience. An ACL can be for a specific target, but contain multiple ports for that target.
    E.g. I assign ports 80, 7777, 8080, and a few others, in a single web-acl.xml, to a network target (host or domain).
    Read the usage notes in Oracle® Database PL/SQL Packages and Types Reference.>Thanks I'll try that. I think we had problems in the past with separate ACL's containing rules for the same host, the response we got back from support was not to do that. This way didn't occur to me.

  • What is the best practice way of stopping a sub-domain from being indexed?

    Hi there
    I notice that a client site is being indexed as both xxx.com.au [their primary domain] as well as xxx.PARTNERDOMAIN.com.au.
    I have Googled quite a bit on the subject and have browsed the forums, but can't seem to find any specific best practice approach to only having the primary domain indexed.
    One method that seems to be the most recommended is having a second robots.txt site for the sub-domain xxx.PARTNERDOMAIN.com.au with Disallow: /
    Does anyone have a definitive recommendation?
    Many thanks
    Gavin

    Sorry I assumed they were two different sites, they are the same "content" just two different URLs?
    Canonical links will help but it wont stop or remove you being indexed it only adds higher index weight to the Canonical linked URL. Plus only search engines that support that meta tag will work.
    You essentially need two robots.txt to do this effectively or add the META TAG if you can split the sites somehow.
    There is a more complex way, you could host the second domain somewhere else, use htaccess or similar to do a reverse proxy to the main site to pull the contents in realtime, all except the robots.txt file. This way you could have two sites with only 1 to update but still have two robots.txt's
    http://en.wikipedia.org/wiki/Reverse_proxy
    I've done this for a few sites, you are essentially adding a middle man, it will be a tad slower depending on how far the two servers are apart, but it is like having a cname domain but with total control.

  • Redirecting an Affiliate Link to a Sub-Domain?

    I have been trying to find a way to redirect the long and revealing affiliate link to a shorter and masked sub-domain. Example: http://www.domainname.com/AP.aspx?ID=4534&EID=87004562 to affiliate.domainname.com.
    I have tried creating A and CNAME records and produces error messages stating "Record Data is Invalid". The URL Redirect options are also limited in functionality.
    Has anyone found any workarounds or tricks they would be willing to share?

    Just create a virtural directory mapping in the web server configuration that points to the CFIDE folder on your system.

  • Externally Hosted DNS - How do I set up my 2003 DNS server for sub domain to point to internal IP address??

    I have a domain name(domain.com) DNS hosted at my ISP. I also have 3 sub domains DNS hosted at the same ISP pointing to various external ip addresses (mail.domain.com, vpn.domain.com and ts.domain.com). We want to set up sales.domain.com to point to an
    internal 10. IP address. We have AD integrated DNS servers for our 2003 AD domain. The AD domain name is totally different than the hosted domain name in question. I currently edit the host file for a couple of PC's but this isnt practical company wide so
    I want to add entries on our internal AD DNS servers to resolve the locally hosted site. If i recall, someone once told me that you cannot just put an A record for one sub domain, I would have to have entries on my 2003 DNS server to resolve anything related
    to the domain.com name. Is this accurate? If so, what is the proper way to configure my 2003 AD DNS server to resolve anything domain.com related for my internal users while still allowing my ISP to do the DNS lookup for the internet.

    On my 2003 AD integrated DNS server...i rightclick forward lookup zone and choose...new zone..primary zone (store zone in AD checkbox checked)..i chose to all DNS servers in the AD domain for replication...zone name sales.domain.com....allow secure updates
    option....then i added an A record in that zone...sales.domain.com..pointed that towards my internal 10. IP address...is this correct? It seems to be working correctly for the sales.domain.com DNS record...and i tested the other sub domains...and those look
    like they are going to my ISP for DNS resolution...
    Is this the correct procedure? I did this on a test AD domain and not my production...i want to make sure i dont break everything under the domain.com by incorrectly adding 1 sub domain..

  • How to choose a specific port via Palimpsest?

    I found out today that Palimpsest Disk Utility can access remote harddrives via the SSH protocol. But Im not running SSH on my server via port 22. How do I choose a specific port?

    galo,
    willkommen zu den Apple Diskussionen.
    You don't state which version of Keynote you're using. Keynote 3 offers an option to restart the presentation after an inactivity of x min (at least 1 min).
    Look at Document inspector on the Document tab.
    In German: Klick im Informationen-Fenster auf das weiße Blatt und ggf. den Dokument-Button. Dort findest Du:
    Präsentation als Endlosschleife
    Präsentation neu starten nach Inaktivität von
    Viel Erfolg.
    If this information is useful to you, please mark it as "helpful" or "solved" using the little buttons in the titlebar of this message. Thank you.
    PowerBook G4 17", 1GB   Mac OS X (10.4.7)   iMac G5 20"; iPod 3G, iPod Shuffle, iSight

  • WRT54G: How do I limit access to specific ports, only to local IP's

    Using a WRT54G with Windows XP, and I've setup a web server that I'm still testing. Until I understand the security better, I want to limit access from outside IP's to the port that it's running on, but NOT limit access from the outside to services running on other ports. Is there a way to block a range of IP addresses (or conversely, only permit access for a limited range of IP addresses) to a specific port? So for example (assuming server's on Port 99, and IP address to the outside world is 99.99.99.99: Port 99: Blocked IP Range: 0.0.0.0-99.99.99.98, and 99.99.99.100-255.255.255.255 - OR Port 99: Allowed IP Range: 99.99.99.99 Alternatively, I would be interested to permit access to the web server port, only for certain MAC addresses. Is this pretty secure, and if so, how can this be done? I've poked around the router settings and spent a good deal of time researching this; any help would be greatly appreciated...

    Why do you want to block IP addresses:  "IP Range: 0.0.0.0-99.99.99.98, and 99.99.99.100-255.255.255.255" ?   This is everybody on the web, except your router!    If you really want to block all these people, just unplug your router from your Internet connection.  That is a block that cannot be hacked!
    Normally a server is assigned a fixed LAN IP address.  This address must be outside the DHCP server range of your router, and it cannot end in 0, 1, or 255.
    Next you forward a port (for example, 99) to the server's fixed LAN IP address.
    Data arriving at the Internet port of your WRT54G for port 99 will then be forwarded to your server.  If you have other Internet services (i.e. server B) running on port 1297, then data that arrives at the Internet port of your WRT54G for port 1297 will be directed to server B.   Assuming that you only have port 99 and port 1297 open, then any other unrequested data (for any other port) that arrives at the Internet port of your WRT54G will simply be ignored (and thereby blocked).    If you connect another computer to a LAN port of the WRT54G, connect to the Internet, and request data, then when that data arrives at the Internet port of the WRT54G, it will be allowed to pass, and it will be routed to your computer.
    In summary, by default, all router ports are closed.  The only way to get data through the router is either to open a port (using port forwarding, or alternatively, the UPnP function), or for someone (or some program) on the LAN to request data from the web.
    The router cannot limit the use of a port by MAC address.    When you open a port on your router, you are opening your server to invasion from anyone on the Internet.  So, your server must be setup to protect itself.   Rather than limiting server use by MAC address (which can be faked), your server should be setup to require a user name and password. 

  • Active Directory : Replication Issue - "Disconnected" sub-domain from the Forest

    Hello everyone,
    I'm managing a multi-domain forest (with 7 sub-domain).  All are working fine except for one.  Throught repadmin (Repadmin /replsum /bysrc /bydest /sort:delta), I noticed I got both domain controllers of a subdomain (there are only 2 DCs in that
    subdomain), who hadn't replicated with the rest of the forest for more than 60 days.
    According to my research, it's usually recommended to Depromote and repromote the problematic DC to avoid the issue of lingering objects.  In this case, it's both DC of a sub-domain.  Of course, on the others DCs in the forest, I got the event
    ID 2012 "it has been too long since this machine last replicated with the named source machine....". 
     HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
    to a value of 1. 
    As I understand it, this may cause lingering objects to appear (they can be removed with repadmin /removelingeringobjects command with the DSA GUID, naming context, etc..).  So far, I haven't used that registry key yet because of the associated risks.
    I didn't noticed any other issue so far.  Users in the problematic sub-domain are fine, and the problematic sub-domain seems to be able to pull replication data from the others DCs in the forests. (at least, I'm not getting any error in the A.D. Sites
    and Services)
    I added two new DCs for the affected sub-domains, so the number of DCs for that domain went from 2 to 4 DCs.  The two old DCs that hadn't replicated for 60 days are windows Server 2003 and the two new DCs are Server 2008 R2. 
    Unfortunately (and I was half expecting this, but did it anyway since I must eventually replace the old DCs), that didn't solve my issue, since the rest of the forest "doesn't see" the two new DCs of the sub-domain.  By that, I mean that I
    cannot add an Active Directory Domain Services Connection in Sites & Services console (from a DC in another domain of the forest or even the root domain).  I see all the DCs, including the two old DCs that are server 2003, but not the new ones. 
    I believe it's because the others DCs doesn't pull/replicate the information from the old DCs anymore, so they aren't "aware" of the two new DCs for that problematic sub-domain.
    I was wondering what is the best course of action. Is it worthwhilte to use the registry key force replication with the old DCs ?  (and hopefully, the new DCs will get their AD Services connection/replication vector created, so I can depromote
    the old DCs.
    Since the Old DCs from the problematic sub-domain seems to be able to pull the replication from the rest of the forest, does the risk of Lingering object isn't that great ?
    Or is it too risky and I must create a new sub-domain and migrate one way or another the users ? (which would be time-consuming)
    Thanks in advance,
    Adam

    Thanks for the reply.  One of the link had another link to a good article about the use of repadmin :
    So, I ran the command "repadmin /removinglingerobjects " on one of the problematic DCs ().
    For clarity purpose, let's say I used the domain :
    domain = main domain
    subdomain = the domain whose DC are problematic (all of them).
    AnotherSubDomain = Just another subdomain I used as a "reference" DC to cleanup the appropriate partition.
    Command (the DSA guid is from a DC "clean" in another domain)
    repadmin /removelingeringobjects adrec01.mysubdomain.domain.ca C4081E00-921A-480D-9FDE-C4C34F96E7AC dc=ANOTHERsubdomain,dc=domain,dc=ca /advisory_mode
    I got the following message in the event viewer :
    Active Directory Domain Services has completed the verification of lingering objects on the local domain controller in advisory mode. All objects on this domain controller have had their existence verified on the following source domain controller.
    Source domain controller:
    c4081e00-921a-480d-9fde-c4c34f96e7ac._msdcs.mydomain.ca
    Number of objects examined and verified:
    0
    Objects that have been deleted and garbage collected on the source domain controller yet still exist on this domain controller have been listed in past event log entries. To permanently delete the lingering objects, restart this procedure without using the
    advisory mode option.
    How should I interpret the message "number of objects examined and verified 0".  Does it mean it just didn't find any object to compare ? (which would be odd IMHO)  Or there is another problem ?
    Thanks in advance,
    Adam

  • Domain-wide administration port?

    Hi,
    I tried to start a cluster of 2 servers across 2 physical machines, I got error and server starting failed:
    "Starting Managed Servers in Standby mode requires the domain-wide administration port."
    My topology is as following:
    Domain A is created in machine A and copy to machine B:
    Machine A: admin serverr at port 8001. Managed server at port 8088 of cluster1.
    Machine B: Managed server at port 8088 of the same cluster1.
    What is wrong? Why I cannot start cluster? Why I got error " need domain-wide administration port"? What is "domain-wide administration port"? Why my created domain admin server at Machine A didn't work?
    Your prompt help is highly appreciated. I am waiting for your help.
    Thank you in advance

    Hi,
    First of all the domain-wide administration port enables you to start a WebLogic Server instance in STANDBY state. It also allows you to separate administration traffic from application traffic in your domain.
    so check in ur console whether u have specified the start up mode as STANDBY.if so change it to Running and try restarting the server:-
    You can do that by chking the below link:-
    http://e-docs.bea.com/wls/docs92/ConsoleHelp/taskhelp/startstop/SpecifyAStartupMode.html.
    Domain-wide administration port is used when you have configured ssl for ur servers. Refer http://e-docs.bea.com/wls/docs103/ConsoleHelp/taskhelp/domainconfig/EnableTheDomainwideAdministrationPort.html for more info.

  • MAP ANLE item to specific line item in FI

    Hello SAP Guru,
    Good day!
    We ahve a requirement to map asset values to particular purchase order. And if the amount settle to the Fixed Asset came from AUC, we can map the original FI document number in table ANLE. Thats right, we can find the original FI document number in the ANLE table field "Original Document Number". Original document number can came from  MIRO which came from PO that is settled to WBS (which is eventually settle to FXA) or came from direct posting to the WBS. Sometimes, there are line item in the FI document that has no PO number. Is there a way to map ANLE table to specific FI line item?
    Thanks!
    Jhero

    Hello Alok,
    You can find info from PO -> QUOT -> BIDINV via SRC_GUID field which has original item GUID. Try following function module.
    1. FM BBP_PD_PO_GETDETAIL
    E_ITEM-SRC_GUID  <- Get QUIT item GUID
    2. BBP_PD_QUOT_ITEM_GETDETAIL
    ES_ITEM-SRC_GUID <- Get BIDINV item GUID
    3. BBP_PD_BID_ITEM_GETDETAIL
    ES_ITEM <- Get BIDINV item information.
    Regards,
    Masa

Maybe you are looking for

  • The messages sent with PC suite are not saved in m...

    I have a bluetooth device to connect my phone (Nokia 6233) to PC. When I'm trying to send a message everything goes perfect (the message is sent) only one problem appear: the message is not saved in my phone. Any ideas for this problem? Why the messa

  • Process Success Message not displaying properly

    Hello. I know there are many threads about this problem. But i can't get it right. I have custom MRU process like: DECLARE   p_updcount NUMBER := 0; BEGIN   FOR i IN 1 .. apex_application.g_f08.COUNT                          LOOP     IF apex_applicat

  • Menu/end jump going haywire

    I have 2 stories, each has a different menu and end jump. when I set them in the connections/target window, one story works correctly and the other does not. what in the world is going on? I run into glitches like this in DVDSP all the time, if you s

  • Need Clarifications

    Hi, I am trying to learn BO suite of tools and any kind of guidance/material on the following would be really appreciated. Universe     1. What are the objects from BW, which can be used as source for creating a Universe Other than InfoCubes.     2.

  • Adobe Updater in PE4 on Mac OSX

    I am using PE4.0.1 on a G4 iMac and PB both running OSX 10.5.6. When I open PE on both machines I get the message "The Adobe Updater could not be started. Please reinstall the application and components". The Updater is on my HD under Utilities but o