Map two different source elements to one target element

Hello,
This is my scenario.
RootSource1 (0..1)
         source1 (0..unbounded)---> one entry of this will create one TargetSource
             nameA --> mapped to TargetSource/Target1
RootSource2 (0..1)
         source2 (0..unbounded)---> one entry of this will create one TargetSource
             nameB --> mapped to TargetSource/Target1
TargetSource (0..unbounded)
         Target1 (0..1)
From graphical tool, I can map
TargetSource = removeContexts(source1)
I also have to do:
TargetSource = removeContexts(source2)
But it seems the tool does not let me do the second mapping. Does anybody know how?
Any help appreciated.
Best regards,
-mhd

Try it like this:
in target message, right-clink on TargetSource field and select "duplicate entry".
Map the 1st source field to the 1st TargetSource entry and the 2nd Source field to the 2nd TargetSource entry.
Regards,
Henrique.
PS: I don't think you need removeContext in this case, since the root is 0...1.

Similar Messages

One target table is loading from two different source but same columns but one source is in a database and other is in a flat file.

Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SM

You are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1        TenderPickup
2        TenderLoan
7        TenderPickup
101     TenderPickup
102     TenderLoan
107     TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Differentiating Master Data from two different source systems

Friends,
i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
Thanks in advance for all the help.
Mike

I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating this InfoObject. Please let me know if there is any way out of it.
Thanks
Mike

I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??

I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......

You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others.

Can I use two different itune accounts on one computer?

Can I use two different itune accounts on one computer?

1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941)

Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

Adobe contact information - http://helpx.adobe.com/contact.html may help

I have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

The iphone will mirror the selected content of your computer.
Make sure everything is on your computer. Select what you want on your iphone, sync

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

How can I set two different emails in only one contact form?

How can I set two different emails in only one contact form?

To enter multiple email address with the Contact Form Widgets:
Click the Options icon for the selected widget, then
In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
Cari

Two different condition types in one report

Hello,
i have a problem with the conditional display of a report.
I want to use two different condition types for one report.
For example I want to show the report only when the page is not in printer friendly mode and when the value of an item is NULL.
Is that possible?
Has anyone a solution for this problem?
Thank you,
Tim

Tim,
you can use
IF V('PRINTER_FRIENDLY') = 'YES' AND :P1_ITEM IS NOT NULL THEN RETURN FALSE;
ELSE RETURN TRUE;
END IF;
in the Conditional Display picking PL/SQL Function Body returning a Boolean.
Denes Kubicek

Can I have two different podcast URLs on one iWeb website?

Can I have two different podcast URLs on one iWeb website?

I don't think anybody understands your question. Can you elaborate?

Two different Dock themes on one Mac?

I use CandyBar to change my icons but I cannot get OS X to recognise two respective users wishes to have separate Dock styles. With one login I would like one style and another with the other but they all seem to share the same resources in the Dock.app.
Is it possible to have two different themed Docks on one machine?
*this also applies to the Finder icon*

Hi There
Sorry to say but this is not possible, Candybar works by replacing the image resources in the application bundle. This prevents different users from having their own personal Dock themes and Application icons.
J.C

Map two different source elements to one target element

Similar Messages

Maybe you are looking for